ECONOLINE
DC/DC-Converter
with 3 year Warranty
REC10
Refer to Application Notes
Selection Guide
10 Watt
DIP24 &SMD
Single &Dual
Output
●10W DIP24 Package
●2KVDC and 3kVDC Isolation Options
●2:1 and 4:1 Versions
●Continuous Short Circuit Protection
(power limiting)
●Synchronous Rectification on 3.3, 5V outputs
●Full SMD internal design
●Through Hole or SMD Pinning Options
●Remote Control Pin
●Efficiency to 87%
Features
Regulated
Converters
Part Input Output Output Efficiency Max. Cap.
Number Voltage Voltage Current Load
(VDC) (VDC) (mA) (%)
REC10-xx3.3SRW/H*/A/M 9-18, 18-36, 36-75 3.3 2000 84-85 2200µF
REC10-xx05SRW/H*/A/M 9-18, 18-36, 36-75 5 2000 86-87 2200µF
REC10-xx12SRW/H*/A/M 9-18, 18-36, 36-75 12 833 85-86 470µF
REC10-xx15SRW/H*/A/M 9-18, 18-36, 36-75 15 667 85-86 220µF
REC10-xx05DRW/H*/A/M 9-18, 18-36, 36-75 ±5 ±1000 84 ±1000µF
REC10-xx12DRW/H*/A/M 9-18, 18-36, 36-75 ±12 ±416 86 ±220µF
REC10-xx15DRW/H*/A/M 9-18, 18-36, 36-75 ±15 ±333 86 ±100µF
REC10-xx3.3SRWZ/H*/A/M 9-36, 18-75 3.3 2000 84 2200µF
REC10-xx05SRWZ/H*/A/M 9-36, 18-75 5 2000 86 2200µF
REC10-xx12SRWZ/H*/A/M 9-36, 18-75 12 833 85 470µF
REC10-xx15SRWZ/H*/A/M 9-36, 18-75 15 667 85 220µF
REC10-xx05DRWZ/H*/A/M 9-36, 18-75 ±5 ±1000 83 ±1000µF
REC10-xx12DRWZ/H*/A/M 9-36, 18-75 ±12 ±416 85 ±220µF
REC10-xx15DRWZ/H*/A/M 9-36, 18-75 ±15 ±333 85 ±100µF
2:1
xx = 9-18Vin = 12,
xx = 18-36Vin = 24,
xx = 36-75Vin = 48
* Standard is /H2 for 2kVDC isolation,
use /H3 for 3kVDC Isolation (not SMD)
* add suffix "/X2" for pinning options, see next page.
* add suffix "/SMD" for SMD package, e.g.
REC10-2405SRW/H2/A/M/SMD
Description
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
The REC10-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package
with 2kV or 3kV isolation options and are suitable for higher power industrial or medical
applications. Remote on/off control is standard and SMD pinning is offered with the /SMD option.
The converters can deliver 150% rated power for short periods of time to cope with applications
with large capacitive loads or high start up currents.
Input Voltage Range 2:1 & 4:1
Input Filter PI Network
Output Voltage Accuracy ±1.5% max.
Line Voltage Regulation (VLto VHat full load) ±0.5% max.
Load Voltage Regulation Single ±0.5% max.
(25% to 100% full load ) Dual ±1.2% max.
Cross Regulation (100%: 25% to 100% full load ) ±5% max.
Output Ripple and Noise (with 100n output capacitor and 20MHz BW) 100mVp-p max.
Start-up time 300ms typ.
Operating Frequency (Full Load) 400kHz typ.
Efficiency at Full Load see Selection Guide
Minimum Load 0%
continued on next page
4:1
xx = 9-36Vin = 24,
xx = 18-75Vin = 48
EN-60950-1 Certified
EN-60601-1 Certified
UL-60950-1 Certified
E224736
RoHS
2011/65/EU
6/6
**Any data referred to in this datasheet are of indicative nature and
based on our practical experience only. For further details, please refer
to our Application Notes.
REV: 0/2015 E-163www.recom-power.com