http://www.tracopower.com Page 1 of 3
DC/DC Converters
TMA Series, 1 Watt
Features
◆ Single-in-line (SIP) package
◆ Single and dual output models
◆ I/O isolation 1‘000 VDC
◆ Unregulated device
◆ High efficiency up to 81%
◆ Operating temp. range –40°C to +85°C
◆ Industry standard pinout
◆ 100% Burn-in (8 h)
◆ Lead free design, RoHS compliant
◆ 3-year product warranty The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line
package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in
many space critical applications for board level power distribution. The use of SMD-
technology makes it possible to offer a product with high performance at low cost.
Ordercode Input voltage Output voltage Output current max. Efficiency typ.
TMA 0505S 5 VDC 200 mA 71 %
TMA 0512S 12 VDC 84 mA 78 %
TMA 0515S 5 VDC ± 10% 15 VDC 67 mA 78 %
TMA 0505D ± 5 VDC ±100 mA 72 %
TMA 0512D ±12 VDC ±42 mA 78 %
TMA 0515D ±15 VDC ±34 mA 79 %
TMA 1205S 5 VDC 200 mA 73 %
TMA 1212S 12 VDC 84 mA 80 %
TMA 1215S 12 VDC ± 10% 15 VDC 67 mA 80 %
TMA 1205D ±5 VDC ±100 mA 74 %
TMA 1212D ±12 VDC ±42 mA 81 %
TMA 1215D ±15 VDC ±34 mA 81 %
TMA 1505S 5 VDC 200 mA 72 %
TMA 1512S 12 VDC 84 mA 79 %
TMA 1515S 15 VDC ± 10% 15 VDC 67 mA 79 %
TMA 1505D ±5 VDC ±100 mA 72 %
TMA 1512D ±12 VDC ±42 mA 80 %
TMA 1515D ±15 VDC ±34 mA 80 %
TMA 2405S 5 VDC 200 mA 71 %
TMA 2412S 12 VDC 84 mA 78 %
TMA 2415S 24 VDC ± 10% 15 VDC 67 mA 79 %
TMA 2405D ±5 VDC ±100 mA 72 %
TMA 2412D ±12 VDC ±42 mA 79 %
TMA 2415D ±15 VDC ±34 mA 80 %
Models
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TMA Series 1 Watt
Input Specifications
Input current no load /full load 5 Vin models: 30 mA / 270 mA typ.
12 Vin models: 12 mA / 110 mA typ.
15 Vin models: 11 mA / 90 mA typ.
24 Vin models: 7 mA / 55 mA typ.
Surge voltage (1 s max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
15 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse polarity input current 0.3 A max.
Reflected input ripple current can be reduced by ext. 1–3.3 µF polyester film
capacitor
Input filter internal capacitors
Output Specifications
Voltage set accuracy ±1 % typ. / ±3 % max.
Voltage balance (dual output models, balanced loads) ±0.1 % typ. / ±1 % max.
Regulation – Input variation (1 % change Vin) 1.2 % typ. / 1.5 % max.
– Load variation (20 – 100 %) 5 to 10 % max. (depending on model)
Ripple and noise (20 MHz Bandwidth) 50 mVp-p typ. / 75 mVp-p max.
Temperature coefficient ±0.01 %/K typ. / ±0.02 %/K max.
Short circuit protection limited 0.5 s max.
Capacitive load Single output models: 220 µF max.
Dual output models: 100 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +90°C max.
– Storage –50°C to +125°C
Derating 3.3, 5 and ±5 VDC output models: 4 %/K above 75°C
all other output models: 4 %/K above 80°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2’000’000 h
Isolation Test Voltage (Input/Output, 60s) 1‘000 VDC
Insulation System Functional
Isolation Capacitance (Input/Output) 60 pF typ. / 100 pF max.
Isolation Resistance (Input/Output) >1‘000 MOhm
Switching Frequency 70 to 120 kHz (frequency modulation)
Environmental Compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Supporting documents: www.tracopower.com/overview/tma
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Physical Specifications
Casing material non conductive black plastic (UL 94V-0 rated)
Package weight 5 & 12 Vin models: 2.2 g (0.07 oz)
15 % 24 Vin models: 2.6 g (0.09 oz)
Potting material Epoxy
Soldering temperature max. 260°C / 10 s
Outline Dimensions mm (inches)
Bottom view
1 2 54 6
1.3
2.54
0.5
2.4 2.54
19.5
(0.77)
5.08 2.54
0.5
(0.02)
10.2
(0.4)
(0.02)
0.5
(0.02)
(0.1) (0.1) (0.1)
(0.09) (0.2)
6.1
(0.24)
15/24 Vin Models
7.1
(0.28)
(0.05)
0.5
(0.02)
3.2
(0.13)
0.25
(0.01)
Tolerances ±0.25 (±0.01)
Pin pitch tolerances ±0.13 (±0.005)
pins ±0.05 (±0.002)
Pin Single Dual
1+Vin (Vcc) +Vin (Vcc)
2–Vin (GND) –Vin (GND)
4–Vout –Vout
5No pin Common
6+Vout +Vout
Pin-Out
DC/DC Converters
TMA Series 1 Watt
Rev. October 23. 2018