RS1G - Shaoxing Rising-sun technology Co., Ltd.

旭昌科技 SHAOXING RISING-SUN TECHNOLOGY CO., LTD.

http://www.rs-elec.com

RS1A THRU RS1M

SURFACE MOUNTED FAST RECOVERY RECTIFIER

VOLTAGE: 50 TO 1000V CURRENT: 1.0A

Features SMA/DO-214AC

◆ Glass passivated junction chip

◆ For surface mounted application

◆ Low profile package

◆ Built-in strain relief

◆ High surge capability

◆ High temperature soldering guaranteed

250℃/10sec/at terminal/complete device

◆ Fast recovery time for high efficiency

Mechanical data

◆ Cases: Molded with UL-94 class V-0 recognized Flame Retardant

Epoxy

◆ Terminals: Plated axial leads solderable MIL-STD 202E, method

208C

◆ Polarity: Color band denote cathode end

◆ Weight:0.002 ounce, 0.064 gram

Maximum ratings and electrical characteristics Dimensions in inches and (millimeters)

Ratings at 25℃ ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%

Parameter Symbols RS1A RS1B RS1D RS1G RS1J RS1K RS1M Units

Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 550 700 V

Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified current

3/8” lead length at TL=100℃ IF(AV) 1.0 A

Peak forward surge current 8.3ms single half

sine-wave superimposed on rated load IFSM 30.0 A

Maximum instantaneous forward voltage at

rated forward current VF 1.3 V

Maximum DC reverse current Ta=25℃

At rated DC blocking voltage Ta=125℃ IR 5.0

1000.00

µA

Maximum Reverse Recovery Time Trr 150 250 500 nS

Typical junction capacitance CJ 10.0 pF

Typical thermal resistance RJA 32.0 ℃/W

Storage and operating junction temperature TSTG -50 to +150 ℃

Notes: 1. Measured at 1.0MHz and applied voltage of 4.0Vdc

2. Thermal resistance from junction to terminal mounted on 5×5mm copper pad area

3. Reverse recovery condition If=1.0A,Irr=0.25A