SG-8002CA62.5000M-SCML0:ROHS - Seiko Epson Corporation

http://www.epsontoyocom.co.jp

Crystal oscillator Epson Toyocom

ecifications

(

characteristics

)

Specifications *2

Item Symbol PT / ST PH / SH PC / SC Conditions / Remarks

1 MHz to 125 MHz

Vcc = 4.5 V to 5.5 V (except SG-8002LB)

1 MHz to 80 MHz

Vcc = 4.5 V to 5.5 V (SG-8002LB only)

1 MHz to 125 MHz VCC = 3.0 V to 3.6 V

Output frequency range f0

1 MHz to 66.7 MHz VCC = 2.7 V to 3.6 V

Supply voltage VCC 4.5 V to 5.5 V 2.7 V to 3.6 V

-55 °C to +125 °C (SG-8002CA / JF / JA / DC / DB)

-55 °C to +100 °C (SG-8002JC)

Storage temperature T_stg -40 °C to +125 °C (SG-8002CE / LB) Store as bare product.

Operating temperature T_use -20 °C to +70 °C / -40 °C to +85 °C *1

B: ±50 × 10-6, C: ±100 × 10-6 -20 °C to +70 °C

M: ±100 × 10-6 M: ±100 × 10-6 -40 °C to +85 °C (except SG-8002JC) *3

Frequency tolerance f_tol

L:±50 × 10-6 L:±50 × 10-6 -40 °C to +85 °C (SG-8002LB only) *3

40 mA Max. (SG-8002CE)

30 mA Max.

(SG-8002LB)

Current consumption ICC 45 mA Max.

(SG-8002CA / JF /JC / JA / DC / DB)

28 mA Max. No load condition, Max. frequency

30 mA Max. 16 mA Max. OE=GND (PT.PH,PC) (except SG-8002LB)

Output disable current I_dis

25 mA Max. 16 mA Max. OE=GND (PH,PC) (SG-8002LB only)

Stand-by current I_std 50 µA Max. ST =GND (ST,SH,SC)

40 % to 60 %

TTL load: 1.4 V, Max. load condition (except SG-8002LB)

40 % to 60 % CMOS load:50 % VCC level, Max. load condition

(except SG-8002LB)

40 % to 60 %

50 % VCC, L_CMOS=15 pF, ≤80 MHz (SG-8002LB)

- -

40 % to 60 % 50 % VCC, L_CMOS=15 pF, VCC=3.0 V to 3.6 V, ≤125 MHz

(SG-8002LB)

40 % to 60 % 50 % VCC, L_CMOS=15 pF, VCC=2.7 V to 3.6 V, ≤66.7 MHz

(SG-8002LB)

Symmetry *1 SYM

45 % to 55 % *1

High output voltage VOH VCC -0.4 V Min. IOH=-16 mA (PT,ST,PH,SH ) , -8 mA (PC,SC)

Low output voltage VOL 0.4 V Max. IOL=16 mA (PT,ST,PH,SH) , 8 mA (PC,SC)

5 TTL Max.

Max. frequency and Max. Supply voltage

(SG-8002CE / CA / JA / DC / DB)

Output load condition

(TTL) *1 L_TTL 5 TTL Max.

f0 ≤ 90 MHz and Max. Supply voltage

(SG-8002JF / JC )

15 pF Max. Max. frequency and Max. Supply voltage

(SG-8002CE / JF / JC)

15 pF Max. Max. frequency and Max. Supply voltage

(SG-8002LB)

Output load condition

(CMOS) *1 L_CMOS

15 pF Max. 25 pF Max 15 pF Max. Max. frequency and Max. Supply voltage

(SG-8002CA / JA / DC / DB)

VIH 2.0 V Min. 70 % VCC Min.

Output enable /

disable input voltage VIL 0.8 V Max. 20 % VCC Max. OE terminal orST terminal

4 ns Max.

TTL load: 0.4 V to 2.4 V level (except SG-8002LB)

Rise / Fall time *1 tr/ tf

3 ns Max. CMOS load: 20 % VCC to 80 % VCC level

Start-up time t_str 10 ms Max. Time at minimum supply voltage to be 0 s

Frequency aging f_aging ±5 × 10-6 / year Max. +25 °C, VCC=5.0 V/ 3.3 V (PC,SC) First year

*1 Operating temperature, the available frequency, symmetry, output load conditions and rise/fall time, please refer to “Outline specifications” page.

*2 PLL-PLL connection & Jitter specification, please refer to “Jitter specifications and characteristics chart” page.

*3 Refer to “Outline specifications” (Frequency range) for “M” and ”L” tolerance availability. Checking possible by the Frequency checking program.

Product Number (please contact us)

CRYSTAL OSCILLATOR

PROGRAMMABLE

SG - 8002 series

•Frequency range : 1 MHz to 125 MHz

•Supply voltage : 3.0 V / 3.3 V / 5.0 V

•Function : Output enable(OE) or Standby(ST )

•Short mass production lead time by PLL technology.

•SG-Writer available to purchase,

please contact Epson Toyocom or local sales representative.

CE, LB, CA

http://www.epsontoyocom.co.jp

Crystal oscillator Epson Toyocom

E125.0C

SC181A

3.2±0.2 2.2

2.5±0.2

#1 #2

#4 #3

1.05±0.15

0.9

0.7

1.4

2.4

1.9

1.2

#1 #2

#3 #4

C (ex. 0.01 µF)

Resist

SG-8002CE Ceramic SON 4pin 3.2x2.5x1.05 mm

SG-8002LB SOJ 4pin 5.0x3.2x1.2 mm

(0.35) 2.5 (0.35)

0.1

5.0 ±0.2

E 125.0B

3.2 ±0.2

2.8

FCC21

2.54

1.0

1.2 Max.

0min.

2.2

2.54

1.5

1.6

Metal may be exposed on the

top or bottom of this product.

This will not affect any quality,

reliability or electrical spec.

SG-8002CA Ceramic SON 4pin 7.0x5.0x1.4 mm

5.08

#2 #1

1.4

2.6

5.0±

7.0±

#1 #2

E 125.000

PHC935C

5.08

1.4 +

(

ex. 0.01

)

4.2

5.08

1.8

Resist

SG-8002JF SOJ 4pin 7.1x5.1x1.5 mm

5.08

0.4 0 Min.

1.5 Max.

(0.75) (0.75)

3.8

7.1±0.2

5.1±0.2

4.6±0.2

E 125.00C

2PH 9245A

#1 #2

#3 #4 C

(

ex. 0.01

)

4.2

5.08

1.8

2.0

Resist

Metal may be exposed on the top

or bottom of this product. This will

not affect any quality, reliability or

electrical spec.

To maintain stable operation, provide a

0.01uF to 0.1uF by-pass capacitor at a loca-

tion as near as possible to the power source

terminal of the crystal product (between Vcc -

GND).

Pin map

Pin Connection

1 OE or ST

2 GND

3 OUT

4 VCC

Note.

OE Pin (PT, PH, PC)

OE Pin = "H" or "open": Specified frequency output.

OE Pin = "L": Output is high impedance.

ST Pin (ST, SH, SC)

ST Pin = "H" or "open": Specified frequency output.

ST Pin = "L": Output is low level ( weak pull - down), oscillation

stops.

External dimensions and Recommended foot

rint

(

Unit:mm

)



http://www.epsontoyocom.co.jp

Crystal oscillator Epson Toyocom

SG-8002JA SOJ 4pin 14.0x9.8x4.7 mm Package and pin compatible with SG-615.

0.51 5.08 0.25Min.

4.7 Max.

14 .0 M ax.

#1 #2

#4 #3

8.65

9.8 Max.

7.62

0.25

100.0000 C

2PH 9357B

EPSON

5.08

1.3

3.0

8.8

SG-8002DC DIP half size

19.8 Max.

6.36

0.51 15.24 0.2 Min.

2.54 Min. 5.3 Max.

7.62

0.25

90°~105°

13.7 Max.

6.6

0.51 7.62

0.2Min.

2.54 Min. 5.3 Max.

7.62

0.25

90°~105°

EPSON

2PH 9357B 16.0000 C 2PH

EPSON 9357B

10 0.000 0 C

#1 #4

#1 #7

#8 #14

SG-8002DB DIP full size

Note.

OE Pin (PT, PH, PC)

OE Pin = "H" or "open": Specified frequency output.

OE Pin = "L": Output is high impedance.

ST Pin (ST, SH, SC)

ST Pin = "H" or "open": Specified frequency output.

ST Pin = "L": Output is low level ( weak pull - down), oscillation

stops. To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor

at a locat ion as near as po ssible to the po wer source t erminal of the crys-

tal product (between Vcc - GND).

Pin map

Pin Connection

1 OE or ST

2 GND

3 OUT

4 VCC

Pin map: SG-8002DC

Pin Connection

1 OE or ST

4 GND

5 OUT

8 VCC

Pin map: SG-8002DB

Pin Connection

1 OE or ST

7 GND

8 OUT

14 VCC

External dimensions and Recommended foot

rint

(

Continued

)

(

Unit:mm

)



Product s number



(Please contact us for each product.)

SG-8002CE: Q3321CExxxxxx00 SG-8002JC: Q3307JCx1xxxx00

SG-8002LB: Q3323LBxxxxxx00 SG-8002JA: Q3306JAx1xxxx00

SG-8002CA: Q3309CAx0xxxx00 SG-8002DC: Q3204DCx1xxxx00

SG-8002JF: Q3308JFx1xxxx00 SG-8002DB: Q3203DBx1xxxx00

SG-8002JC SOJ 4pin 10.5x5.8x2.7 mm Package and pin compatible with SG-636.

0.51 5.08 0.05Min.

2.7 Max.

10.5 Max.

#1 #2

#4 #3

5.0

5.8 Max.

3.6

(1.0) (1.0)

E125.0000 C

2PH 9357B

5.08

1.3

2.1

4.6

Metal may be exposed on the top

or bottom of this product. This will

not affect any quality, reliability or

electrical spec.

http://www.epsontoyocom.co.jp

Crystal oscillator Epson Toyocom

SG-8002 Series Outline of specifications

Model Supply

volt-

age

Operating

temperature Output load

condition Symmetry Output rise time /

Output fall time

-20 °C to +70 °C 40 % to 60 % (1.4 V, L_TTL=5 TTL+15 pF, f0≤125 MHz)

45 % to 55 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤66.7 MHz)

PT/ST -40 °C to +85 °C 5TTL+15pF 45 % to 55 % (1.4 V, L_TTL=5 TTL+ 15 pF, f0≤27.0 MHz)

2.0 ns Max. (0.8 V to 2.0 V,L_TTL=Max.)

4.0 ns Max. (0.4 V to 2.4 V,L_TTL=Max.)

-20 °C to +70 °C 15 pF (f0≤125 MHz)

25 pF (f0≤100 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤66.7 MHz)

PH/SH

4.5 V to

5.5 V

-40 °C to +85 °C 25 pF (f0≤27 MHz) 45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤27.0 MHz) 3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

3.0 V to

3.6 V 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, L_CMOS=15 pF, f0≤40 MHz)

SG-8002CE

PC/SC 2.7 V to

3.6 V

-40 °C to +85 °C 15 pF 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤66.7 MHz) 3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

PH/SH 4.5 V to

5.5 V -40 °C to +85 °C 15 pF

25pF (f0≤50 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤80 MHz)

45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤50 MHz) 3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

3.0 V to

3.6 V 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, L_CMOS=15 pF, f0≤40 MHz)

SG-8002LB PC/SC 2.7 V to

3.6 V

-40 °C to +85 °C 15 pF 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤66.7 MHz) 3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

-20 °C to +70 °C 5TTL+15 pF (f0≤ 90 MHz)

15 pF (f0≤125 MHz)

25 pF (f0≤66.7 MHz)

40 % to 60 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤90 MHz)

↑ (1.4 V, L_CMOS=15 pF, f0≤125 MHz)

↑ (1.4 V, L_CMOS=25 pF, f0≤66.7 MHz)

45 % to 55 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤66.7 MHz)

PT/ST

-40 °C to +85 °C 15 pF (f0≤40 MHz ) 40 % to 60 % (1.4 V, L_CMOS=15 pF, f0≤40 MHz)

2.0 ns Max. (0.8 V to 2.0 V,L_CMOS≤2 5pF)

4.0 ns Max. (0.4 V to 2.4 V,L_CMOS or L_TTL=Max.)

-20 °C to +70 °C 15 pF (f0≤125 MHz)

25 pF (f0≤90 MHz)

50 pF (f0≤50 MHz)

40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

↑ (50 % VCC, L_CMOS=25 pF, f0≤90.0 MHz)

↑ (50 % VCC, L_CMOS=50 pF, f0≤50.0 MHz)

45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤66.7 MHz)

PH/SH

4.5 V to

5.5 V

-40 °C to +85 °C 15 pF (f0≤40 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤40 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤25pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

3.0 V to

3.6 V 15 pF

30 pF (f0≤40 MHz) 40 % to 60 % (50 % VCC, CL=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, CL=30 pF, f0≤40 MHz)

SG-8002JF

PC/SC 2.7 V to

3.6 V

-40 °C to +85 °C 15 pF 40 % to 60 % (50 % VCC, CL=15 pF, f0≤66.7 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤15pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

-20 °C to +70 °C 5TTL+15pF (f0≤125 MHz)

25 pF (f0≤66.7 MHz)

40 % to 60 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤125 MHz)

↑ (1.4 V, L_CMOS=25 pF, f0≤66.7 MHz)

45 % to 55 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤66.7 MHz)

PT/ST -40 °C to +85 °C 5 TTL+15 pF (f0≤40 MHz)

15 pF (f0≤55 MHz) 40 % to 60 % (1.4 V, L_CMOS=15 pF, f0≤55.0 MHz)

45 % to 55 % (1.4 V, L_TTL=5 T TL+1 5 pF, f0≤40.0 MHz)

2.0 ns Max. (0.8 V to 2.0 V,L_CMOS or L_TTL=Max.)

4.0 ns Max. (0.4 V to 2.4 V,L_CMOS or L_TTL=Max.)

-20 °C to +70 °C 25 pF (f0≤125 MHz)

50 pF (f0≤66.7 MHz)

40 % to 60 % (50 % VCC, L_CMOS=25 pF, f0≤125 MHz)

↑ (50 % VCC, L_CMOS=50 pF, f0≤66.7 MHz)

45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤66.7 MHz)

PH/SH

4.5 V to

5.5 V

-40 °C to +85 °C 15 pF (f0≤55 MHz)

25 pF (f0≤40 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤55.0 MHz)

45 % to 55 % (50 % VCC, L_MOS=25 pF, f0≤40.0 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤25pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

3.0 V to

3.6 V 15 pF

30 pF (f0≤40 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, L_CMOS=30 pF, f0≤40 MHz)

SG-8002CA

SG-8002JA

SG-8002DB

SG-8002DC

PC/SC 2.7 V to

3.6 V

-40 °C to +85 °C 15 pF 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤66.7 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤15pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

PT/ST 5TTL+15 pF (f0≤90 MHz)

15 pF (f0≤125 MHz)

25 pF (f0≤66.7 MHz)

40 % to 60 % (1.4 V,L_CMOS= 15 pF, f0≤125 MHz)

↑ (1.4 V,L_TTL=5 TTL+15 pF, f0≤90.0 MHz)

↑ (1.4 V,L_CMOS=25 pF, f0≤66.7 MHz)

45 % to 55 % (1.4 V,L_TTL=5 TTL+15 pF, f0≤66.7 MHz)

2.0 ns Max. (0.8 V to 2.0 V,L_CMOS or L_TTL=Max.)

4.0 ns Max. (0.4 V to 2.4 V,L_CMOS or L_TTL=Max.)

PH/SH

4.5 V to

5.5 V -20 °C to +70 °C 15 pF (f0≤125 MHz)

25 pF (f0≤90 MHz)

50 pF (f0≤66.7 MHz)

40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

↑ (50 % VCC, L_CMOS=25 pF, f0≤90 MHz)

↑ (50 % VCC, L_CMOS=50 pF, f0≤50 MHz)

45 % to 55 % (50 % VCC, L_CMOS=25 pF, f0≤66.7 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤25pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

3.0 V to

3.6 V 15 pF

30 pF (f0≤40 MHz) 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤125 MHz)

45 % to 55 % (50 % VCC, L_CMOS=30 pF, f0≤40 MHz)

SG-8002JC

PC/SC 2.7 V to

3.6 V

-20 °C to +70 °C 15 pF 40 % to 60 % (50 % VCC, L_CMOS=15 pF, f0≤66.7 MHz)

3.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS≤15pF)

4.0 ns Max. (20 % VCC to 80 % VCC,L_CMOS=Max.)

►TABLE OF FREQUENCY RANGE

Model Supply voltage Frequency Frequency tolerance

Operating Temperature

1.0 MHz to 125 MHz B,C PT/ ST

PH/ SH 4.5 V to 5.5 V 1.0 MHz to 27 MHz M

3.0 V to 3.6 V 1.0 MHz to 125 MHz

SG-8002CE PC/SC 2.7 V to 3.6 V 1.0 MHz to 66.7 MHz B,C,M

1.0 MHz to 80 MHz B,C

PH/ SH 4.5 V to 5.5 V 1.0 MHz to 27 MHz M,L

3.0 V to 3.6 V 1.0 MHz to 125 MHz

SG-8002LB PC/ SC 2.7 V to 3.6 V 1.0 MHz to 66.7 MHz B,C,M,L

1.0 MHz to 125 MHz B,C PT/ ST

PH/ SH 4.5 V to 5.5 V 1.0 MHz to 40 MHz M

3.0 V to 3.6 V 1.0 MHz to 125 MHz

SG-8002JF PC/ SC 2.7 V to 3.6 V 1.0 MHz to 66.7 MHz B,C,M

1.0 MHz to 125 MHz B,C PT/ ST

PH/ SH 4.5 V to 5.5 V 1.0 MHz to 55 MHz M

3.0 V to 3.6 V 1.0 MHz to 125 MHz

SG-8002CA

SG-8002JA

SG-8002DB

SG-8002DC PC/ SC 2.7 V to 3.6 V 1.0 MHz to 66.7 MHz B,C,M

PT/ ST

PH/ SH 4.5 V to 5.5 V 1.0 MHz to 125 MHz B,C

3.0 V to 3.6 V 1.0 MHz to 125 MHz

SG-8002JC PC/ SC 2.7 V to 3.6 V 1.0 MHz to 66.7 MHz B,C

Frequency tolerance: B:±50×10-6(-20 °C to +70 °C ), C:±100×10-6 (-20 °C to +70 °C ), M:±100×10-6 (-40 °C to +85 °C ), L:±50×10-6 (-40 °C to +85 °C )

http://www.epsontoyocom.co.jp

Crystal oscillator Epson Toyocom

SG-8002 series Jitter specifications and characteristics chart

■PLL-PLL connection

Becaus e we use a PLL technolo gy, there are a few cases that the jitter value will increase when SG-8002 is connect ed to another

PLL-oscillator.

In our exper ience, we are unable to recommend these products for the applications such as telecom carrier use or analog video

clock use. Please be careful checking in advance for these application (Jitter specification is Max.250 ps/CL=15 pF)

Jitter Specifications

Model Supply

Voltage Jitter Item Specifications Remarks

150 ps Max. 33 MHz ≤ f0 ≤ 125 MHz, L_CMOS=15 pF

Cycle to cycle 200 ps Max. 1.0 MHz ≤ f0 < 33 MHz, L_CMOS=15 pF

200 ps Max. 33 MHz ≤ f0 ≤ 125 MHz, L_CMOS=15 pF

PT / PH

ST / SH 5.0 V ±0.5 V Peak to peak 250 ps Max. 1.0 MHz ≤ f0 < 33 MHz, L_CMOS=15 pF

Cycle to cycle 200 ps Max. 1.0 MHz ≤ f0 ≤ 125 MHz, L_CMOS=15 pF

SC / PC 3.3 V ±0.3 V Peak to peak 250 ps Max. 1.0 MHz ≤ f0 ≤ 125 MHz, L_CMOS=15 pF

■Remarks on noise management for power supply line

We do not recommend inserting filters or other devices in the power supply line as the counter measure of EMI noise reduction.

This device insertion might cause high-frequency impedance high in the po wer supply line and it affects oscillator stable drive.

When this measure is required, please evaluate circuitry and device behavior in the circuit and verify that it will not affect oscillation.

Start up time (0 % VCC to 90 % VCC) of power source should b e more th an 150 μs.

■SG-8002 series Characteristics chart

VCC=5.0 V

25 pF

Freque ncy(MHz)

Current consumption (VCC=5.0V)

20 40 60 80 100 120 140

ICC(mA)

Frequency(MHz)

Disable Current (VCC=5.0V)

20 40 60 80 100 120 140

I_dis (mA)

VCC (V)

I_std (μA)

2.5

Stand-by Current

3.0 3.5 4.0 4.5 5.0 5.5 6.0

Frequency(MHz)

Symmetry 5.0V TTL Level

20 40 60 80 100 120 140

Symmetry (%)

Symmetry 3.3 V CMOS Level

20 40 60 80 100 120 140

Frequency(MHz)

Symmetry (%)

Symmetry 5.0 V CMOS Lev el

20 40 60 80 100 120 140

Frequency(MHz)

Symmetry (%)

0 Frequency(MHz)

Output load vs. Additional Current consumption

20 40 60 80 100 120 140

2.5 VCC (V)

Voltage coefficient [ VCC vs I_dis,I_std ]

3.0 3.5 4.0 4.5 5.0 5.5 6.0

0.2

0.4

0.6

Times

0.8

1.0

1.2

1.4

1.6

1.8

2.0

Rise time (ns)

Output Rise tim e (CMOS Level)

15 20 25 30 35 40 45

1.0

1.5

2.0

3.0

2.5

Load capacitance (pF) 50 55

Output Fa ll time (CMOS Leve l)

3.0

10 15 20 25 30 35 40 45

1.0

1.5

2.0

2.5

Load capacitance (pF)

Fall Time

(

)

50 55

Output Fall time (TTL Level)

15 20 25 30

1.0

1.5

2.0

Load ca pacitance (pF)

Fall Time (ns)

Out

ut Rise time

(

TTL Le vel

)

10 15 20 25 30

1.0

1.5

2.0

Load ca

acitance

)

Ri se Time (ns)

15 pF

50 pF

15 pF

30 pF

25 pF 15 pF

I_dis(Va)=Times(Va)×I_dis(5.0V)

I_std(Va)=Times(Va)×I_std(5.0V)

25 pF

15 pF

50 pF

30 pF

5.0 V

5.5 V

4.5 V

3.3 V

3.6 V

3.0 V

3.3 V

3.6 V

3.0 V 5.0 V

5.5 V

4.5 V

5.0 V

5.5 V

4.5 V

5.0 V

5.5 V

4.5 V

2.7 V

25 pF

Additional Value (mA)

“QMEMS” EPSON TOYOCOM

In order to meet customer needs in a rapidly advancing digital,

broadband and ubiquitous society, we are committed to offering products

that are one step ahead of the market and a rank above the rest in quality.

To achieve our goals, we follow a “3D (three device) strategy” designed to

drive both horizontal and vertical growth. We will to grow our three device

categories of “Timing Devices”, ”Sensing Devices” and “ Optical Devices”,

and expand vertical growth through a combination of products from these

categories.

A Quartz MEMS is any high added value quartz device that exploits the

characteristics of quartz crystal material but that is produced using MEMS

(micro-electro-mechanical system) processing technology.

Market needs are advancing faster than previously imagined toward

smaller, more stable crystal products, but we will stay ahead of the curve

by rolling out products that exceed market speed and quality

requirements. We want to further accelerate the 3D strategy by QMEMS.

Quartz devices have become crucial in the network environment where

products are increasingly intended for broadband, ubiquitous applications

and where various types of terminals can transfer information almost

immediately via LAN and WAN on a global scale. Epson Toyocom

Corporation addresses every single aspect within a network environment.

The new corporation offers “Digital Convergence” solutions to problems

arising with products for consumer use, such as, core network systems

and automotive systems.

QMEMS and its logos are registered trademarks or trademarks of Seiko

Epson Corporation in Japan and other countries.

PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM

CONFORMING TO INTERNATIONAL STANDARDS

At Epson Toyocom, all environmental initiatives operate under the

Plan-Do-Check-Action(PDCA) cycle designed to achieve continuous

improvements. The environmental management system (EMS) operates

under the ISO 14001 environmental management standard.

All of our major manufacturing and non-manufacturing sites,in Japan

and overseas, completed the acquisition of ISO 14001 certification.

WORKING FOR HIGH QUALITY

In order provide high quality and reliable products and services than

meet customer needs,

Epson Toyocom made early efforts towards obtaining ISO9000 series

certification and has acquired ISO9001 for all business establishments in

Japan and abroad. We have also acquired ISO/TS 16949 certification

that is requested strongly by major automotive manufacturers as

standard.

►Explanation of the mark that are using it for the catalog

►Pb free.

►Complies with EU RoHS directive.

*About the products without the Pb-free mark.

Contains Pb in products exempted by EU RoHS directive.

(Contains Pb in sealing glass, high melting temperature type solder or other.)

►The products have been designed for high reliability applications such as Automotive.

Notice

• This material is subject to change without notice.

• Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom.

• The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not

assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for

any patent or intellectual copyrights.

• Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign

Exchange and Foreign Trade Law of Japan and may require an expo rt license from the Ministry of International Trade and Industry or other

approval from another government agency.

• You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon

of mass destruction or for other military purp oses. You are also requested that you would not make the p roducts available to any third party

who may use the products for such prohibited purposes.

• These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high

reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance.

/ Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) /

Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security

equipment / traffic control equipment / and others requiring equivalent reliability.

• In this document, product codes and markings will remain as previously identified prior to the merger. Due to the on-going strategy of gradual

unification of part numbers, please review product codes and markings.

• All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

ISO 14000 is an international standard for environmental management

that was established by the International Standards Organization in 1996

against the background of growing concern regarding global warming,

destruction of the oz one la

er, and

lobal deforestation.

ISO/TS16949 is the international standard that added the sector-specific

supplemental requirements for automotive industry based on ISO9001.