LS 3369, LY 3369, LG 3369
LC 3 mm (T1) LED, Diffused
Low Current LED
2001-03-12 1
Besondere Merkmale
•Gehäusetyp: eingefärbtes, diffuses
3mm(T1)Gehäuse
•Besonderheit des Bauteils: hohe Lich tstärke
bei kleinen Strömen; Lötspieße mit
Aufsetzebene
•Wellenlänge: 628 nm (super-rot),
587 nm (gelb), 570 nm (grün)
•Abstrahlwinkel: 60°
•Technologie: GaAsP
•optischer Wirkungsgrad: 2 lm/W
•Gruppierungsparameter: Lichtstärke
•Lötmethode: Wellenlöten (TTW)
•Verpackung: Schüttgut, gegurtet lieferbar
Anwendungen
•optischer Indikator
•Hinterleuchtung (LCD, Schalter, Tasten,
Displays, Werbebeleu chtung ,
Allgemeinbeleuchtung)
•Innenbeleuchtung im Automobilbereich
(z.B. Instrumentenbeleuchtung, u.ä.)
Features
•package: colored, diffused 3 mm (T1) pack age
•feature of the device: high luminous intensity
at low currents; solder leads with stand-off
•wavelength: 628 nm (super-red),
587 nm (yellow), 570 nm (green)
•viewing angle: 60°
•technology: GaAsP
•optical efficiency: 2 lm/W
•grouping parameter: luminous flux
•soldering methods: TTW soldering
•packing: bulk, available taped on reel
Applications
•optical indicators
•backlighting (LCD, switches, keys, displays,
illuminated advertising, general lighting)
•interior automotive lighting (e.g. dashboard
backlighting, etc.)
2001-03-12 2
LS 3369, LY 336 9, LG 3369
Helligkeitswerte w erden mit einer Stromein prägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %.
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe
oder mindestens zwei Einzelgruppen.
In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten.
Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse über einen
längeren Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozesss) erlaubt
keine Zusage einer einzelnen Helligkeitsgruppe. Daher müssen mindestens zwei
Helligkeitsgruppen vorgesehen werden!
Note: The standard shipping format for serial types includes a lower or upper family group or at least
two individual groups.
No packing unit / tape ever contains more than one luminous intensity group.
Luminosity variations caused by the technology used in current LED manufacturing processes
over a protracted manufacturing period (semiconductor material - chip fabrication - assembly
process) mean that it is not possi ble to assign LEDs to a single luminous int ensity group. For this
reason at least two luminous intensity groups must be provided!
Typ
Type Emissionsfarbe
Color of
Emission
Gehäusefarbe
Color of
Package
Lichtstärke
Luminous
Intensity
IF = 2 mA
IV (mcd)
Bestellnummer
Ordering Code
LS 3369-EH
LS 3369-G
LS 3369-H
LS 3369-GK
super-red red diffused 0.71 ... 4.50
1.80 ... 2.80
2.80 ... 4.50
1.80 ... 11.2
Q62703-Q1748
Q62703-Q2068
Q62703-Q3820
Q62703-Q3821
LY 3369-EH
LY 3369-F
LY 3369-G
LY 3369-H
LY 3369-FJ
yellow yellow diffused 0.71 ... 4.50
1.12 ... 1.80
1.80 ... 2.80
2.80 ... 4.50
1.12 ... 7.10
Q62703-Q1749
Q62703-Q2030
Q62703-Q2029
Q62703-Q1906
Q62703-Q3822
LG 3369-EH
LG 3369-F
LG 3369-G
LG 3369-FJ
green green diffused 0.71 ... 4.50
1.12 ... 1.80
1.80 ... 2.80
1.12 ... 7.10
Q62703-Q1750
Q62703-Q2069
Q62703-Q2070
Q62703-Q3823
LS 3369, LY 3369, LG 3369
2001-03-12 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Betriebstemperatur
Operating temperature range Top – 55 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 55 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 100 °C
Durchlassstrom
Forward current IF7.5 mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM 0.15 A
Sperrspannung
Reverse voltage VR5V
Leistungsaufnahme
Power consumption
TA ≤ 25 °C
Ptot 20 mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Junction/solder point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
Minimale Beinchenlänge
Minimum lead length
Rth JA
Rth JS
400
180
K/W
K/W
2001-03-12 4
LS 3369, LY 3369, LG 3369
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter Symbol
Symbol Werte
Values Einheit
Unit
LS LY LG
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 2 mA
λpeak 635 586 572 nm
Dominantwellenlänge 1) (typ.)
Dominant wavelength
IF = 2 mA
λdom 628 587 570 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 2 mA
∆λ 45 45 25 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ60 60 60 Grad
deg.
Durchlassspannung 2) (typ.)
Forward voltage (max.)
IF = 2 mA
VF
VF
1.8
2.5 2.0
2.6 1.9
2.5 V
V
Sperrstrom (typ . )
Reverse current (max.)
VR = 5 V
IR
IR
0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 2 mA; –10°C ≤ T ≤ 100°C
TCλpeak 0.11 0.10 0.11 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 2 mA; –10°C ≤ T ≤ 100°C
TCλdom 0.07 0.07 0.07 nm/K
Temperaturkoeffizient von VF(typ.)
Temperature coefficient of VF
IF = 2 mA; –10°C ≤ T ≤ 100°C
TCV– 2. 0 – 1.6 – 1.9 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 2 mA
ηopt 222lm/W
1) Wellenlängen werden m it einer St romeinp rägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are te sted at a current puls e duration of 25 ms and a tolerance of ±1 nm.
2) Spannungswert e w erden mit einer St romeinprägedauer v on 1 ms und einer Genauigkeit von ±0.1 V ermit te lt.
Voltage s are tested at a current pulse duration of 1 ms and a t olerance of ±0.1 V.
LS 3369, LY 3369, LG 3369
2001-03-12 5
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 2 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
%
rel
λ
OHL01210
100
80
60
40
20
0
400 450 500 550 600 650 700
nm
I
green
yellow
super-red
λ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚
OHL01190
50˚
60˚
70˚
80˚
90˚
100˚ 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LS 3369, LY 3369, LG 3369
2001-03-12 6
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(2 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 2 mA
10 -1 V
5
OHL01208
I
F
F
V
0
10
1
10
2
10
5
mA
1 1.4 1.8 2.2 2.6 3 3.4
yellow
green
super-red
0
OHL01193
˚C0 20 40 60 80 100
1
2
3
4
5
6
mA
8
T
F
I
A
T
S
T
temp. solder point
temp. ambient
T
S
A
T
7
V
V(2 mA)
10
-1 0
10 10
12
10
mA
10
-3
5
OHL01207
F
I
5
-2
10
5
-1
10
0
10
1
10
II
55
green
super-red
yellow
yellow
green
super-red
0
OHL01675
˚C
A
T
0 20 40 60 80 100
V
V
(25 ˚C)
II
0.4
0.8
1.2
1.6
2
LS 3369, LY 3369, LG 3369
2001-03-12 7
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
OHL01278
s10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
DI
TT
P
F
t
P
=
D
=0.005
0.01
0.02
0.05
0.2
0.5
DC
10
0
5
I
F
t
1
10
2
10
3
10
5
mA
0.1
p
2001-03-12 8
LS 3369, LY 3369, LG 3369
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: mm (inch).
Kathodenkennung: kürzerer Lötspieß
Cathode mark: short solder lead
Gewicht / Approx. weight: 0.15 g
0.4 (0.016)
0.6 (0.024)
3.1 (0.122)
3.4 (0.134)
Area not flat
5.7 (0.224)
6.1 (0.240)
ø2.7 (0.106)
ø2.9 (0.114)
4.8 (0.189)
4.4 (0.173)
3.7 (0.146)
3.5 (0.138)
27.0 (1.063)
29.0 (1.142)
0.8 (0.031)
0.4 (0.016)
0.4 (0.016)
0.7 (0.028)
1.2 (0.047)
1.8 (0.071)
GEXY6045
0.9 (0.035)
1.1 (0.043)
Cathode
spacing
2.54 (0.100)
0.6 (0.024)
0.4 (0.016)
LS 3369, LY 3369, LG 3369
2001-03-12 9
Lötbedingungen
Soldering Conditions
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
Empfohlenes Lötpaddesign Wellenlöten (TTW)
Recommended Solder Pad TTW Soldering
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: mm (inch).
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
4 (0.157)
OHLPY985
4.8 (1.890)
2001-03-12 10
LS 3369, LY 3369, LG 3369
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describes the type of co m ponent and sha ll not be c ons idered as assured char ac te ris tics .
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or download ed, please find the latest versio n in th e In te rnet .
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be us ed in life-support devices or sy s t em s 2 with the express written approval of OSRAM OS.
1 A critical c omponent is a compone nt used in a life-support devic e or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail , it is rea sonable to as su m e th at the health of the user m ay be endangered.
Revision History: 2001-03-12
Previous Version: 2001-03-12
Page Subjects (major changes since last revision)
