2SA2190 TOSHIBA Multi-chip Device Silicon PNP Epitaxial Transistor Type 2SA2190 Unit: mm Power Amplifier Applications Driver Stage Amplifier Applications High transition frequency: fT = 200 MHz (typ.) Absolute Maximum Ratings (Tc = 25C) Characteristic Symbol Rating Unit Collector-base voltage VCBO - 180 V Collector-emitter voltage VCEO - 180 V Emitter-base voltage VEBO -5 V Collector current IC - 2.0 A Base current IB - 1.0 A 2.0 W 20 W Tj 150 C Tstg - 55~150 C Collector power dissipation Ta = 25C Tc = 25C Junction temperature Storage temperature range PC 1 : BASE 2 : COLLECTOR 3 : EMITTER JEDEC JEITA SC-67 TOSHIBA 2-10U1A Weight: 1.7 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical Characteristics (Tc = 25C) Characteristic Symbol Test Conditions Min Typ. Max Unit Collector cut-off current ICBO VCB = - 180 V, IE = 0 - 5.0 A Emitter cut-off current IEBO VEB = - 5 V, IC = 0 - 5.0 A V (BR) CEO IC = - 10 mA, IB = 0 - 180 V Collector-emitter breakdown voltage hFE (1) VCE = - 5 V, IC = - 0.1 A 100 320 hFE (2) VCE = - 5 V, IC = - 1 A 50 VCE (sat) IC = - 1 A, IB = - 0.1 A - 0.24 -1.0 V Base-emitter voltage VBE VCE = - 5 V, IC = - 1 A - 1.5 V Transition frequency fT VCE = - 5 V, IC = - 0.3 A 200 MHZ VCB = - 10 V, IE = 0, f = 1MHZ 26 pF DC current gain Collector-emitter saturation voltage Collector output capacitance Cob 1 2007-06-07 2SA2190 Marking Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2007-06-07 2SA2190 IC - VBE IC - VCE -50 -30 -1.6 (A) -100 -300 -2.0 -10 Collector current IC Collector current IC (A) -2.0 -1.2 -5 -0.8 -3 Common emitter Tc=25 Single non-repetitive pulse -0.4 -2 -4 -6 -8 Collector-emitter voltage -1.5 -1.0 Tc = 100 -25 -0.5 25 IB = -1 mA 0 0 Common emitter VCE = - 5 V Single non-repetitive pulse 0 0 -10 -0.2 -0.4 Base-emitter voltage VCE (V) hFE - IC Collector-emitter saturation voltage VCE (sat) (V) DC current gain hFE Tc = 100C -25C 25C 10 Common emitter VCE = - 5 V Single non-repetitive pulse 1 -0.0001 -0.001 -0.01 -1.0 -0.8 -1.2 VBE (V) VCE (sat) - IC -1 1000 100 -0.6 -0.1 Collector current IC -1 Common emitter =10 Single non-repetitive pulse -0.1 Tc = 100C -25C -0.01 -0.001 -0.001 -10 (A) 25C -0.01 -0.1 Collector current IC -1 -10 (A) VBE (sat) - IC Base-emitter saturation voltage VBE (sat) (V) -10 Common emitter =10 Single non-repetitive pulse Tc = -25C -1 100C 25C -0.1 -0.01 -0.001 -0.01 -0.1 Collector current -1 IC -10 (A) 3 2007-06-07 2SA2190 rth - tw Transient thermal resistance rth (C/W) 1000 Curves should be applied in thermal limited area. (single non-repetitive pulse) Infinite heat sink No heat sink 100 10 1 0.001 0.01 0.1 10 1 Pulse width tw 100 (s) PC - Ta Safe Operating Area -10 25 Collector current -0.1 -0.01 -0.001 -1 10 ms* 100 ms* DC operation Tc = 25C *: Single non-repetitive pulse Tc = 25C Curves must be de-rated linearly with increase in temperature. -10 (W) PC 1 ms* IC max. (continuous) Collector power dissipation -1 100s* -IC (A) IC max. (pulsed)* 20 Tc=Ta Infinite heat sink No heat sink 15 10 5 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (C) VCEO MAX. -100 Collector-emitter voltage VCE 1000 -1000 (V) 4 2007-06-07 2SA2190 RESTRICTIONS ON PRODUCT USE 20070701-EN * The information contained herein is subject to change without notice. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-06-07