MOTOROLA Order Number: MC100ES6011 Rev 1, 09/2003 SEMICONDUCTOR TECHNICAL DATA 2.5 V / 3.3 V ECL 1:2 Differential Fanout Buffer MC100ES6011 The MC100ES6011 is a differential 1:2 fanout buffer. The ES6011 is ideal for applications requiring lower voltage. The 100ES Series contains temperature compensation. Features * 270 ps Typical Propagation Delay * Maximum Frequency > 3 GHz Typical * PECL Mode Operating Range: VCC = 2.375 V to 3.8 V D SUFFIX 8 LEAD SOIC PACKAGE CASE 751 with VEE = 0 V * ECL Mode Operating Range: VCC = 0 V with VEE = --2.375 V to --3.8 V * Open Input Default State * Q Output Will Default LOW with Inputs Open or at VEE * LVDS Input Compatible DT SUFFIX 8 LEAD TSSOP PACKAGE CASE TBA ORDERING INFORMATION Device Package MC100ES6011D Q0 1 8 VCC Q0 2 7 D SO--8 MC100ES6011DR2 SO--8 MC100ES6011DT TSSOP--8 MC100ES6011DTR2 TSSOP--8 PIN DESCRIPTION Q1 3 6 D PIN FUNCTION D*, D** ECL Data Inputs Q0, Q0, Q1, Q1 ECL Data Outputs VCC Positive Supply VEE Negative Supply * Pins will default LOW when left open. ** Pins will default to 0.572 VCC/2 when left open. Q1 4 5 VEE Figure 1. 8--Lead Pinout (Top View) and Logic Diagram This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. Motorola, Inc. 2003 1 MC100ES6011 Table 1. ATTRIBUTES Characteristics Value Internal Input Pulldown Resistor 75 k Internal Input Pullup Resistor 56 k ESD Protection Human Body Model Machine Model Charged Device Model > 4000 V > 200 V > 1500 V JA Thermal Resistance (Junction to Ambient) 0 LFPM, 8 SOIC 500 LFPM, 8 SOIC 190C/W 130C/W 0 LFPM, 8 TSSOP 500 LFPM, 8 TSSOP TBD Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Table 2. MAXIMUM RATINGS a Symbol Parameter Conditions Rating Units VSUPPLY Power Supply Voltage Difference between VCC & VEE 3.9 V VIN Input p Voltage g VCC--VEE 3.6 V VCC+0.3 VEE --0.3 V V Iout Output Current Continuous Surge 50 100 mA mA TA Operating Temperature Range --40 to +85 C Tstg Storage Temperature Range --65 to +150 C a Absolute maxim continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute--maximum--rated conditions is not implied. Table 3. DC CHARACTERISTICS (VCC = 0 V; VEE = --2.5 V5% or VCC = 2.5 V5%; VEE = 0 V)a - 40C Symbol IEE Characteristic Min Power Supply Current 0C to 85C Typ Max 12 25 Min Typ Max Unit 12 25 mA VOH Output HIGH Voltageb VCC--1085 VCC--1005 VCC--880 VCC--1025 VCC--955 VCC--740 mV VOL Output LOW Voltageb VCC--1830 VCC--1605 VCC--1305 VCC--1810 VCC--1705 VCC--1405 mV VoutPP Output Peak-to-Peak Voltage VIH Input HIGH Voltage (Single Ended) VCC--1165 VCC--880 VCC--1165 VCC--880 mV VIL Input LOW Voltage (Single Ended) VCC--1810 VCC--1475 VCC--1810 VCC--1475 mV VPP Differential Input Voltagec 0.12 1.3 0.12 1.3 V VEE+1.0 VCC--0.8 VEE+1.0 VCC--0.8 V 150 A VCMR Differential Cross Point IIN Input Current Voltaged 200 200 150 mV a ES6011 circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow > 500 LFPM is maintained. b Output termination voltage VTT = 0V for VCC = 2.5V operation is supported but the power consumption of the device will increase. c VPP (DC) is the minimum differential input voltage swing required to maintain device functionality. d VCMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the VCMR (DC) range and the input swing lies within the VPP (DC) specification. MOTOROLA 2 TIMING SOLUTIONS MC100ES6011 Table 4. DC CHARACTERISTICS (VCC = 0 V; VEE = --3.8 to --3.135 or VCC = 3.8 to 3.135 V; VEE = 0 V)a - 40C Symbol Characteristic Min Typ 0C to 85C Max Min Typ Max Unit IEE Power Supply Current 12 25 12 25 mA VOH Output HIGH Voltageb VCC--1085 VCC--1005 VCC--880 VCC--1025 VCC--955 VCC--740 mV VOL Output LOW Voltageb VCC--1830 VCC--1705 VCC--1405 VCC--1830 VCC--1705 VCC--1405 mV Voutpp Output Peak-to-Peak Voltage VIH Input HIGH Voltage (Single Ended) VCC--1165 VCC--880 VCC--1165 VCC--880 mV VIL Input LOW Voltage (Single Ended) VCC--1810 VCC--1475 VCC--1810 VCC--1475 mV VPP Differential Input Voltagec 0.12 1.3 0.12 1.3 V VEE+1.0 VCC--0.8 VEE+1.0 VCC--0.8 V 150 A VCMR Differential Cross Point IIN Input Current 200 Voltaged 200 mV 150 a ES6011 circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow > 500 LFPM is maintained. b Output termination voltage Vtt = 0V for Vcc = 2.5V operation is supported but the power consumption of the divice will increase. c VPP (DC) is the minimum differential input voltage swing required to maintain device functionality. d VCMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the VCMR (DC) range and the input swing lies within the VPP (DC) specification. Table 5. AC CHARACTERISTICS (VCC = 0 V; VEE = --3.8 V to --2.375 V or VCC = 2.375 V to 3.8 V; VEE = 0 V)a - 40C Symbol Characteristic fMAX Maximum Frequency tPLH, tPHL Propagation Delay (Differential) CLK to Q, Q tSKEW Within Device Skew Q, Q Device to Device Skewb tJITTER Cycle to Cycle Jitter VPP Input Voltage Swing (Differential) VCMR tr tf Min Typ - 25C Max Min Typ >3 170 0C to 85C Max Min Typ Max >3 260 300 9 20 130 180 <2 Unit GHz 270 310 9 20 130 210 <2 285 360 ps 9 20 150 ps <2 ps 150 1200 150 1200 150 1200 mV Differential Cross Point Voltage VEE+1.2 VCC--1.1 VEE+1.2 VCC--1.1 VEE+1.2 VCC--1.1 V Output Rise/Fall Times (20% -- 80%) 70 220 70 220 70 220 ps a Measured using a 750 mV source 50% Duty Cycle clock source. All loading with 50 ohms to VCC--2.0 volts. b Skew is measured between outputs under identical transitions. Q D Receiver Device Driver Device Qb Db 50 50 V TT V TT = V CC -- 2.0 V Figure 2. Voutpp versus Frequency TIMING SOLUTIONS Figure 3. Typical Termination for Output Driver and Device Evaluation 3 MOTOROLA MC100ES6011 Marking Notes: Device Nomenclature 8-- Lead SOIC Marking MC100ES6011D 8-- Lead TSSOP Marking M6011 MC100ES6011DT 6011 Trace Code Identification: "A" -- The First character indicates the Assembly location. "L" -- The Second character indicates the Source Wafer Lot Tracking Code. "Y" -- The Third character indicates the "ALPHA CODE" of the year device was assembled. "W" -- The Fourth character indicates the "ALPHA CODE" of the Work Week device was assembled. The "Y" Year ALPHA CODES Year Month The "W" Work Week ALPHA CODES Work Week Code 1st 6 Months (WW01 - WW26) 2nd 6 Months (WW27 - WW52) A = WW27 A = 2003 FIRST 6 MONTHS WW01 -- WW26 A = WW01 B = 2003 SECOND 6 MONTHS WW27 -- WW52 B = WW02 B = WW28 C = 2004 FIRST 6 MONTHS WW01 -- WW26 C = WW03 C = WW29 D = 2004 SECOND 6 MONTHS WW27 -- WW52 D = WW04 D = WW30 E = 2005 FIRST 6 MONTHS WW01 -- WW26 E = WW05 E = WW31 F = 2005 SECOND 6 MONTHS WW27 -- WW52 F = WW06 F = WW32 G = 2006 FIRST 6 MONTHS WW01 -- WW26 G = WW07 G = WW33 H = 2006 SECOND 6 MONTHS WW27 -- WW52 H = WW08 H = WW34 I = 2007 FIRST 6 MONTHS WW01 -- WW26 I = WW09 I = WW35 J = 2007 SECOND 6 MONTHS WW27 -- WW52 J = WW10 J = WW36 K = 2008 FIRST 6 MONTHS WW01 -- WW26 K = WW11 K = WW37 L = 2008 SECOND 6 MONTHS WW27 -- WW52 L = WW12 L = WW38 M = 2009 FIRST 6 MONTHS WW01 -- WW26 M = WW13 M = WW39 N = 2009 SECOND 6 MONTHS WW27 -- WW52 N = WW14 N = WW40 O = 2010 FIRST 6 MONTHS WW01 -- WW26 O = WW15 O = WW41 P = 2010 SECOND 6 MONTHS WW27 -- WW52 P = WW16 P = WW42 Q = 2011 FIRST 6 MONTHS WW01 -- WW26 Q = WW17 Q = WW43 R = 2011 SECOND 6 MONTHS WW27 -- WW52 R = WW18 R = WW44 S = 2012 FIRST 6 MONTHS WW01 -- WW26 S = WW19 S = WW45 T = 2012 SECOND 6 MONTHS WW27 -- WW52 T = WW20 T = WW46 U = 2013 FIRST 6 MONTHS WW01 -- WW26 U = WW21 U = WW47 V = 2013 SECOND 6 MONTHS WW27 -- WW52 V = WW22 V = WW48 W = 2014 FIRST 6 MONTHS WW01 -- WW26 W = WW23 W = WW49 X = 2014 SECOND 6 MONTHS WW27 -- WW52 X = WW24 X = WW50 Y = 2015 FIRST 6 MONTHS WW01 -- WW26 Y = WW25 Y = WW51 Z = 2015 SECOND 6 MONTHS WW27 -- WW52 Z = WW26 Z = WW52 Marking Example: XABR X = Assembly Location A = First Lot Assembled of this device in the designated Work Week B = 2003 Second 6 Months, WW27 - WW52 R = WW44 of 2003 MOTOROLA 4 TIMING SOLUTIONS MC100ES6011 OUTLINE DIMENSIONS D SUFFIX 8 LEAD SOIC PACKAGE CASE 751-06 ISSUE T D A 8 E 5 0.25 H 1 M B M 4 h B e X 45 _ A C SEATING PLANE L 0.10 A1 B 0.25 TIMING SOLUTIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. C M C B S A S 5 DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ MOTOROLA MC100ES6011 NOTES MOTOROLA 6 TIMING SOLUTIONS MC100ES6011 NOTES TIMING SOLUTIONS 7 MOTOROLA MC100ES6011 Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. E Motorola Inc. 2003 HOW TO REACH US: JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3--20--1, Minami--Azabu, Minato--ku, Tokyo 106--8573, Japan 81--3--3440--3569 USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1--800--521--6274 or 480--768--2130 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852--26668334 HOME PAGE: http://motorola.com/semiconductors MOTOROLA 8 MC100ES6011 TIMING SOLUTIONS