PL IA NT Features CO M Small package dimensions Suitable for most types of soldering processes *R oH S RoHS compliant* Standard packaging on paper tape and reel Power rating at 70 C = 1/16 W Tight dimensional tolerances Three layer termination process with nickel barrier prevents leaching and provides excellent solderability CR0402 - Chip Resistor Derating Curve Rated power in percentage (%) Electrical Characteristics Power Rating @ 70 C ................ 1/16 W Operating Temperature Range ............................... -55 C to +125 C Derated to 0 Load at .................+125 C Maximum Working Voltage..............50 V Maximum Overload Voltage ..........100 V Resistance Range 1 %, E-96 and E-24 ........................10 ohms to 1 megohm 5 %, E-24 ..................2.2 ohms to 5.6 megohms Zero Ohm Jumper ............<0.05 ohms Temperature Coefficient 1 %................................ 100 ppm/C 5 %................................ 200 ppm/C 2.2 ohm to 10 ohms ............ -200 ppm/C to +500 ppm/C 100 80 60 40 20 0 -55 0 125 70 For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Dimensional Drawings 0.20 0.10 (0.008 0.004) 0.20 0.10 (0.008 0.004) Resistor (Ru02) (Jumper chip is a conductor) Overcoat 0.35 0.05 (0.014 0.002) 0.25 0.10 (0.010 0.004) 0.50 0.05 (0.020 0.002) 0.25 0.10 (0.010 0.004) 1.00 0.10 (0.040 0.004) Alumina Substrate DIMENSIONS: MM (INCHES) Internal Electrode (Ag-Pd) Secondary Electrode (Nickel Plated) External Electrode (see Part Numbering - may be ordered as solder-plated or tin-plated) Characteristic Data Load Life 1000Hr R/R (%) 3.0 2.0 1.0 0 Moisture Load Life 1000Hr R/R (%) 10 100 1K 10K 100K 1M 3.0 2.0 1.0 0 Short Time Overload R/R (%) 10 Resistance Value () *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 100 1K 10K 100K 1M Resistance Value () 1.0 0.5 0 -0.5 10 100 1K 10K 100K 1M Resistance Value () CR0402 - Chip Resistor Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 C peak +255 C and +260 C <1> 255 C 225 Temperature (C) 220 C 190 C 175 60 - 90 seconds Ramp Down 6 C/second 150 C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions (Conforms to EIA RS-481A) 1.0 0.2 (.040 .020) 1.5 + 0.1/-0 DIA. (0.059 + 0.004/-0) 0.45 0.1 (0.018 0.004) 4.0 0.1 (0.157 0.004) 1.75 0.1 (0.069 0.004) 0.65 0.1 (0.026 0.004) 2.0 (.080) 13.0 0.5 (.512 .020) 3.5 0.05 (0.138 0.002) 1.15 0.1 (0.045 0.004) 80.0 1.0 (3.150 .040) 8.0 0.2 (0.315 0.008) 2.0 0.1 (0.079 0.004) Paper (Punched) 20.5 (.807) 178.0 2.0 (7.008 .080) Direction of Feeding DIMENSIONS: MM (INCHES) 10.0 1.5 (.394 .059) Part Marking System No Marking on the CR0402 Chip Resistors. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CR0402 - Chip Resistor How to Order CR 0402 - F X - 8252 G LF Model (CR = Chip Resistor) Size * 0402 Resistance Tolerance F = 1 % .............Used with "X" TCR code only for values from 10 ohms through 1 megohm. J = 5 % ............... Used with "W" TCR code for values from 10 ohms through 5.6 megohms. Used with "/" TCR code for zero ohm (jumper) and for values from 1 ohm through 9.1 ohms. TCR (ppm/C) X = 100 ..............Used with "F" Resistance Tolerance code only for values from 10 ohms through 1 megohm. W = 200 .............Used with "J" Resistance Tolerance code only for values from 10 ohms through 5.6 megohms. / = -250 to +500 ...Used with "J" Resistance Tolerance code only for zero ohm (jumper), and for values from 1 ohm through 9.1ohms. Resistance Value For 1 % Tolerance: <100 ohms ..........."R" designates decimal point (example: 24R3 = 24.3 ohms) 100 ohms ...........First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k ohms). For 5 % Tolerance: <10 ohms ............."R" designates decimal point (example: 4R7 = 4.7 ohms) 10 ohms .............First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper). Packaging G = Paper Tape (10,000 pcs.) on 7 " Plastic Reel Termination LF = Tin-plated (RoHS compliant) REV. 07/10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.