Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
801 8, 10 and 12 Pin SIP
(4608M-801-RC/CCL)
Designed to terminate 6 to 10 trans-
mission lines using parallel termination
techniques. Standard resistance values
include 50, 68, 75, 82, 90 or 100
ohms and are chosen to match the
characteristic impedance (Zo) of the
transmission line. A 0.01 mF capacitor is
provided to help maintain a solid power
supply level within the network package,
mitigating any cross talk or feedthrough
effects. Values for R and C not shown in
the following table are available on a
custom basis.
Standard 801 Part Numbers
802 10 Pin SIP
(4610M-802-RC/CCL)
Designed to terminate 6 transmission
lines using parallel termination tech-
niques. Popular resistance values
include 50, 68, 75, 82, 90 or 100
ohms and are chosen to match the
characteristic impedance (Zo) of the
transmission line. Two 0.01 µF
capacitors are provided to reduce cross
talk between lines and to decrease
network package inductance. Values for
R and C not shown in the following table
are available on a custom basis.
Standard 802 Part Numbers
803 8, 10 and 12 Pin SIP 10K ECL
(4610H-803-ZoC/CCL)
Designed to terminate 6 to 10 trans-
mission lines using Thevenin equivalent
parallel termination techniques in
systems using 10K ECL. Popular
impedance values include 50, 70, 75, 80,
90, 100, 120, 150 or 200 ohms. Standard
values for R1 and R2, based on Zo, have
been chosen to accommodate 10K ECL
designs. A 0.1 µF capacitor is provided
to reduce cross talk noise within the
network package. Values for Zoand C
not shown in the following table are
available on a custom basis. This type of
termination is an alternative to parallel
termination used when a separate Vtt
power supply is not available.
Standard 803 Part Numbers
RC
±2% ±20% Bourns Part Number
50Ω0.01µF 4608M-801-500/103L
68Ω0.01µF 4608M-801-680/103L
75Ω0.01µF 4608M-801-750/103L
82Ω0.01µF 4608M-801-820/103L
90Ω0.01µF 4608M-801-900/103L
100Ω0.01µF 4608M-801-101/103L
801 Electrical Schematic and Application
RC
±2% ±20% Bourns Part Number
50Ω0.01µF 4610M-802-500/103L
68Ω0.01µF 4610M-802-680/103L
75Ω0.01µF 4610M-802-750/103L
82Ω0.01µF 4610M-802-820/103L
90Ω0.01µF 4610M-802-900/103L
100Ω0.01µF 4610M-802-101/103L
802 Electrical Schematic and Application
Zo C
±2% R1 R2 ±20% Bourns Part No.
50Ω81Ω130Ω0.1µF 4610H-803-500/104L
70Ω113Ω182Ω0.1µF 4610H-803-700/104L
75Ω121Ω195Ω0.1µF 4610H-803-750/104L
80Ω130Ω208Ω0.1µF 4610H-803-800/104L
90Ω146Ω234Ω0.1µF 4610H-803-900/104L
100Ω162Ω260Ω0.1µF 4610H-803-101/104L
120Ω194Ω312Ω0.1µF 4610H-803-121/104L
150Ω243Ω390Ω0.1µF 4610H-803-151/104L
200Ω325Ω520Ω0.1µF 4610H-803-201/104L
803 Electrical Schematic and Application