
SRB Series
Power Inlet Filters & Power Entry Modules
SRB Series
Minimum Depth, Cost-effective Shielded Power Inlet Filter
3
203
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
UL Recognized
CSA Certified
VDE Approved*
• Smallest depth Corcom RFI filter available
• Complete shield
• Wide range of capacitor values
• Attenuates coupled EMI up to 300MHz
• Minimal to low leakage current versions are
suitable for patient and non-patient contact
medical equipment.
• Full range of mounting and termination options
including unique vertical and horizontal
orientation slide in mounts eliminate the need for
mounting hardware
Ordering Information
15 SRB S 1 - Q
Capacitor ID
See Chart
Omit if none
Output Styles
1 – Spade terminals (back)
2 – Spade terminals (bottom)
8 – Wire leads
P – PC board pins
Mounting Style
S – Snap-in
X – Slide-in (short edge / horizontal)
Y – Slide-in (long edge / vertical)
Omit for flange mount
SRB Series
Current Rating
15A
SRBS8
Maximum leakage current each Line to Ground:
@120 VAC @250 VAC
Capacitor ID / Value 60 Hz 50 Hz
Blank / None 2 A 5 A
Q / 33 pF 2.1 A 3.65 A
R / 100 pF 9.6 A 16.6 A
S / 220 pF 19.2 A 33.2 A
T / 330 pF 24.0 A 41.5 A
W / 470 pF 0.04 mA 0.07 mA
X / 1000 pF 0.07 mA 0.13 mA
Y / 2200 pF 0.16 mA 0.28 mA
Z / 3300 pF 0.24 mA 0.42 mA
Hipot rating (one minute):
Line to Ground: 2250 VDC
Line to Line: 1450 VDC
Rated Voltage (max.): 250 VAC
Operating Frequency: 50/60 Hz
Rated Current: 15A*
Operating Ambient Temperature Range
(at rated current Ir): -10°C to +40°C
In an ambient temperature (T
a) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io= Ir(85-Ta)/45
Specifications
SRB1
SRBP
SRB2
Capacitor Options
Capacitor ID Capacitor Value
Q 33 pF
R 100 pF
S 220 pF
T 330 pF
W 470 pF
X 1000 pF
Y* 2200 pF
Z* 3300 pF
*Not available in SRB8, SRBX or SRBY styles
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC