SSR2045CTJ Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer's Data Sheet * * * * * * * * * * FEATURES: Isolated Low Profile Package Guard Ring for Overvoltage Protection -65 oC to 175oC Operating and Storage Temperature Reverse Voltage to 45 Volts Low Reverse Leakage Hermetically Sealed Very Low Forward Voltage Drop Available in Common Anode (CAJ) and Doubler (DJ) Configuration Higher Voltages Available. Consult Factory. TX, TX-V, and S-Level Screening Available. Consult Factory. 20 AMPS 45 VOLTS ISOLATED FLAT PACK POSITIVE CENTER TAP SCHOTTKY MAXIMUM RATINGS Symbol Value Units VRRM VR 45 Volts Vr 32 Volts IO 20 Amps IFRM 40 Amps IFSM 200 Amps TJ & Tstg -65 to +175 THERMAL CHARACTERISTICS Symbol Value Thermal Resistance, Junction to Case (Both legs tied together) RJC 2.0 Peak Repetitive Reverse Voltage (Per Leg) and DC Blocking Voltage (Per Leg) RMS Reverse Voltage (Per Leg) Half Wave Rectified Forward Current, Averaged Over Full Cycle (Resistive Load, 60 Hz, Sine Wave, TC=25oC) Peak Repetitive Forward Current (TC=55oC, 8.3 ms Pulse, Allow Junction to Reach Equilibrium Between Pulses) Peak Surge Current (TC=55oC, 8.3 ms Pulse, Superimposed on Rated Current at Rated Voltage) Operating and Storage Temperature NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0044A o C Units o C/W DOC SSR2045CTJ Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS IF = 3 Amps IF = 5 Amps IF = 10 Amps Max Instantaneous Forward Voltage Drop, per leg * (TA = 25oC) Max Instantaneous Forward Voltage Drop, per leg * (IF = 5 Amps, TA = 100oC) Max Reverse Leakage Current per leg * (VR = 45 V, TA = 100oC) Max Reverse Leakage Current, per leg * (VR = 45 V, TA = 25oC) Max Junction Capacitance, per leg (VR =10 VDC, TA = 25oC) Symbol Value Unit VF 0.50 0.55 0.65 Volts VF 0.5 Volts IR 10 mA IR 200 A CJ 400 pF NOTES: * Pulse Test: Pulse Width = 300sec, Duty Cycle = 2% 1. Unless Otherwise Specified, All Electrical Characteristics @25C PACKAGE OUTLINE: TO-257 (J) SSR2045CTJ: 2 1 3 SSR2045CAJ: 2 1 3 SSR2045DJ: 2 1 3 *For information on curves, contact the Factory Representative for Engineering Assistance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0044A DOC