4. SPECIFICATIONS FOR EACH SERIES SH Series Long Life (105C X 5,000h) Sleeve color : Purple Marking : Polarity( ), Rated voltage, Rated Capacitance (White) SANYO, OS-CON, Lot.No., Series name Upper category temp.(105C) Specifications Items Category temperature range Tolerance on rated capacitance Tangent of loss angle Leakage current 2 ESR Characteristics of impedance ratio at high temp. and low temp. Endurance Damp heat (Steady state) Resistance to soldering heat Conditions Characteristics -55C to +105C 120Hz M : 20% 120Hz Less than or equal to the value of Table16 After 2 minutes Less than or equal to the value of Table16 Less than or equal to the value of Table16 Based the value at Z / Z 20C 0.75 to 1.25 -55C 100KHz+20C Z / Z 20C 0.75 to 1.25 +105C Within 30% C/C 105C, 5,000h, Rated 1.5 times or less than an initial standard tan voltage applied (25V20V applied) 1 Leakage current 5 times or less than an initial standard Within 10% C/C 60C, 90 to 95%RH 1.5 times or less than an initial standard tan 1,000h, No-applied voltage Below an initial standard Leakage current Within 5% C/C Flow method Below an initial standard tan (2605C X 10s) Leakage current Below an initial standard (after voltage processing) 1 Please reduce 0.25V per 1C from over 85C for 25V products. 2 In case of some problems for measured values, measure after applying rated voltage for 6.3 to 20V products or temperature derating voltage for 25V products for 30 minutes at 105C . Dimensions (unit : mm) Standards of terminal lead position Sleeve d F B A B' 15min. L 4min. C K F D Specificationsfor eachseries SH series has a long life (guaranteed at 105C for 5,000h) with keeping high frequency characteristics. Suitable for industrial equipment which needed high reliability. A' 19min. G Mark ; ideal terminal lead position C; the middle point of A-A' Size List F RV (SV) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 For the minimum 46 6.3 (7.2) 10 (11.5) A A Size Code D0.5max. Lmax. D E E F Kmax. 4.0 7.8 2.00.5 0.45 0.5 0.5 5.0 7.8 2.00.5 0.45 0.5 0.5 C 6.3 7.8 2.50.5 0.45 0.5 0.5 D E 6.3 10.8 2.50.5 0.60 0.5 0.5 8.0 11.5 3.50.5 0.60 0.8 0.8 F 10.0 11.5 5.00.5 0.60 0.8 0.8 A A B B C D Gmax. B B C d0.05 A RV : Rated voltage (SV) : Surge (room temperature) 16 20 25 (18.4) (23.0) (25.0) B F C C D E E F F F packing quantity, please refer to page 51. A A B B C C C D 4. SPECIFICATIONS FOR EACH SERIES Table16 SH Series Characteristics List Size Code 1 Rated Voltage (V) C D E F 1 2 3 ESR 100kHz to 300kHz (m) (max.) Allowable ripple current (mArms)3 Tangent of loss angle (max.) Leakage current (A) (max.)2 25SH1M 25 1.0 350 430 0.03 0.50 25SH1R5M 25 1.5 300 435 0.03 0.75 16SH2R2M 16 2.2 280 450 0.04 0.70 16SH3R3M 16 3.3 280 500 0.04 1.06 10SH4R7M 10 4.7 280 540 0.05 0.94 6.8 250 560 0.05 0.86 6.3 6SH6R8M B Rated Capacitance (F) 25SH2R2M 25 2.2 200 695 0.03 1.10 25SH3R3M 25 3.3 200 700 0.03 1.65 16SH4R7M 16 4.7 180 720 0.04 1.50 16SH6R8M 16 6.8 150 745 0.04 2.18 10SH10M 10 10 150 780 0.05 2.00 6SH15M 6.3 15 120 815 0.05 1.89 25SH4R7M 25 4.7 100 1130 0.03 2.35 25SH6R8M 25 6.8 100 1140 0.03 3.40 25SH10M 25 10 90 1150 0.03 5.00 20SH15M 20 15 90 1200 0.05 6.00 20SH22M 20 22 70 1300 0.05 8.80 16SH33M 16 33 70 1370 0.06 10.56 6SH47M 6.3 47 60 1430 0.07 5.92 25SH15M 25 15 70 1650 0.04 7.50 20SH33M 20 33 70 1710 0.06 13.20 16SH47M 16 47 60 1830 0.06 15.04 10SH68M 10 68 50 2000 0.07 13.60 20SH47M 20 47 40 2450 0.06 18.80 20SH68M 20 68 36 2600 0.06 27.20 16SH100M 16 100 30 2740 0.06 32.00 6SH150M 6.3 150 30 2780 0.07 18.90 20SH100M 20 100 30 3210 0.06 40.00 16SH150M 16 150 28 3260 0.06 48.00 10SH220M 10 220 27 3370 0.07 44.00 6SH330M 6.3 330 25 3500 0.07 41.58 Specificationsfor eachseries A Part Number Tolerance on rated capacitance : M 20%, Product "K" (Tolerance on rated capacitance : 10%) is optionally available. After 2 minutes 100kHz, +45C Temperature coefficient for allowable ripple current Ambient Temp. Coefficient Tx45C 1 45CTx65C 0.85 65CTx85C 0.7 85CTx95C 0.4 95CTx105C 0.25 Frequency coefficient for allowable ripple current Frequency Coefficient 120Hz f 1kHz 0.05 1kHz f 10kHz 0.2 10kHz f 100kHz 0.5 100kHz f 500kHz 1 47