1988, 2009
PHOTOCOUPLER
PS2506-1,PS2506L-1
HIGH ISOLATION VOLTAGE
AC INPUT, DARLINGTON TRANSISTOR TYPE
MULTI PHOTOCOUPLER SERIES −NEPOC Series−
Document No. PN10229EJ04V0DS (4th edition)
Date Published September 2009 NS The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PIN CONNECTION
(Top View)
12
431. Anode,
Cathode
2. Cathode,
Anode
3. Emitter
4. Collector
DESCRIPTION
The PS2506-1 and PS2506L-1 are optically coupled isolators containing a GaAs light emitting diode and an NPN
silicon darlington connected phototransistor.
The PS2506-1 is in a plastic DIP (Dual In-line Package) and the PS2506L-1 is lead bending type (Gull-wing) for
surface mount.
FEATURES
• AC input response
• High isolation voltage (BV = 5 000 Vr.m.s.)
• High current transfer ratio (CTR = 2 000% T YP. )
• High-speed switching (tr, tf = 100
µ
s TYP.)
• Ordering number of tape product: PS2506L-1-F3: 2 000 pcs/reel
• Safety standards
• UL approved: No. E72422
APPLICATIONS
• Power supply
• Telephone/FAX
• FA/OA equipment
• Programmable logic controller
<R>
Data Sheet PN10229EJ04V0DS
2
PS2506-1,PS2506L-1
PACKAGE DIME NSIONS (UNIT : mm)
DIP Type
PS2506-1
3.5±0.3
4.15±0.43.2±0.4
2.54
1.25±0.15 0.50±0.10
0.25
M
4.6±0.35
6.5±0.5
0 to 15°
7.62
0.25
+0.1
–0.05
12
43
Lead Bending Type
PS2506L-1
0.25
M
4.6±0.35
6.5±0.5
3.5±0.3
2.54
1.25±0.15 0.9±0.25
9.60±0.4
0.25
+0.1
–0.05
0.1
+0.1
–0.05
12
43
0.15
PHOTOCOUPLER CONSTRUCT ION
Parameter Unit (MIN.)
Air Distance 7 mm
Outer Creepage Distance 7 mm
Inner Creepage Distance 3.5 mm
Isolation Thickness 0.3 mm
<R>
<R>
Data Sheet PN10229EJ04V0DS 3
PS2506-1,PS2506L-1
MARKING EXAMPLE
2506
NJ931
J
Assembly Lot
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
CTR Rank Code
No. 1 pin
Mark
Package
New PKG
Made in Japan
N931
J
<R>
Data Sheet PN10229EJ04V0DS
4
PS2506-1,PS2506L-1
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS2506-1 PS2506-1-A Pb-Free Magazine case 100 pcs Standard products PS2506-1
PS2506L-1 PS2506L-1-A (UL Approved)
PS2506L-1-F3 PS2506L-1-F3-A Embossed Tape 2 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current (DC) IF ±80 mA
Power Dissipation Derating
∆
PD/°C 1.5 mW/°C
Power Dissipation PD 150 mW
Peak Forward Current*1 IFP ±1 A
Transistor Collector to Emitter Voltage VCEO 40 V
Emitter to Collector Voltage VECO 6 V
Collector Current IC 200 mA
Power Dissipation Derating
∆
PC/°C 2.0 mW/°C
Power Dissipation PC 200 mW
Isolation Voltage*2 BV 5 000 Vr.m.s.
Operating Ambient Temperature TA –55 to +100 °C
Storage Temperature Tstg –55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted toget her.
<R>
Data Sheet PN10229EJ04V0DS 5
PS2506-1,PS2506L-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = ±10 mA 1.17 1.4 V
Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 pF
Transistor Collector to Emitter Dark
Current ICEO VCE = 40 V, IF = 0 mA 400 nA
Coupled Current Transfer Ratio
(IC/IF) CTR IF = ±1 mA, VCE = 2 V 200 2 000 %
CTR Ratio*1 CTR1/
CTR2 IF = 1 mA, VCE = 2 V 0.3 1.0 3.0
Collector Saturation
Voltage VCE(sat) IF = ±1 mA, IC = 2 mA 1.0 V
Isolation Resistance RI-O VI-O = 1.0 kV DC 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF
Rise Time*2 tr VCC = 10 V, IC = 2 mA, RL = 100 Ω 100
µ
s
Fall Time*2 tf 100
*1 CTR1 = IC1/IF1, CTR2 = IC2/IF2
I
F1
I
F2
I
C1
I
C2
V
CE
*2 Test circuit for switching time
Input
Output
90%
10%
t
r
t
d
t
f
t
s
t
on
t
off
V
CC
V
OUT
R
L
= 100 Ω
50 Ω
I
F
Pulse Input
PW = 1 ms
Duty Cycle = 1/10
Data Sheet PN10229EJ04V0DS
6
PS2506-1,PS2506L-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
150
100
50
02550
75 100 125 150
10
1
100
1000
10 000
–50 –25 0 25 50 75 100 0.2
0.5
1
5
10
200
50
0.4
100
0.6 0.8 1.0 1.2 1.4 1.6
5 mA
2 mA
1 mA
0.5 mA
I
F
= 0.1 mA
0.2 mA
1.5 mW/°C
V
CE
= 2 V
5 V
10 V
24 V
40 V
–1.0
80
–1.5
–40
–80
–60
0
–0.5 0.5 1.51.0
0
–20
40
20
60
0.5
0.1
1
5
10
50
100
0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
0°C
–25°C
–55°C
+60°C
+25°C
T
A
= +100°C
Diode Power Dissipation P
D
(mW)
Transistor Power Dissipation P
C
(mW)
Ambient Temperature T
A
(°C)
Forward Current I
F
(mA)
Forward Voltage V
F
(V)
Collector to Emitter Dark Current I
CEO
(nA)
Collector Saturation Voltage V
CE (sat)
(V)
Ambient Temperature T
A
(°C)
Ambient Temperature T
A
(°C)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
Collector Current I
C
(mA) Forward Current I
F
(mA)
Forward Voltage V
F
(V)
FORWARD CURRENT vs.
FORWARD VOLTAGE
150
100
50
02550
75 100 125 150
2 mW/°C
200
Remark The graphs indicate nominal characteristics.
Data Sheet PN10229EJ04V0DS 7
PS2506-1,PS2506L-1
1.4
25
1.2
1.0
0.8
0.6
0.4
0.2
–50 0–25 50 75 100
8 000
0
1 000
2 000
3 000
4 000
5 000
6 000
7 000
V
CE
= 2 V
0.1 0.5 1 5 10 30
1 000
500
100
50
10
5
2100
50 500 1 k 5 k
V
CC
= 5 V,
I
C
= 2 mA,
CTR = 2 280%
t
f
500
50
1 k300
10
100
1 000
5 000
10 000
5 k 10 k 50 k
1 500
2 000
2 500
3 000
0
500
1 000
V
CE
= 2 V
50 10010 500
VCC = 5 V,
IF = 1 mA,
CTR = 2 280%
t
d
t
s
30 500 100 k
t
f
ts
tr
td
t
r
0
20
40
60
80
100
120
140
160
246810
5 mA
2 mA
1 mA
I
F
= 0.5 mA
Normalized to 1.0
at T
A
= 25°C,
I
F
= 1 mA, V
CE
= 2 V
Forward Current I
F
(mA)
Ambient Temperature T
A
(°C)
Load Resistance R
L
(Ω)
Normalized Current Transfer Ratio CTR
Current Transfer Ratio CTR (%)
Load Resistance R
L
(Ω)
Switching Time t ( s)
µ
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
Forward Current I
F
( A)
Current Transfer Ratio CTR (%)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
µ
Collector Current I
C
(mA)
Collector to Emitter Voltage V
CE
(V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
Sample A
B
C
DSample A
B
C
D
Remark The graphs indicate nominal characteristics.
Data Sheet PN10229EJ04V0DS
8
PS2506-1,PS2506L-1
10 102103104105106
0.6
0
0.2
0.4
0.8
1.0
1.2
T
A
= 25
°
C
T
A
= 60
°
C
510
0.2 0.5 1 2 20 50 100 200
I
F
= 1 mA,
V
CE
= 2 V
–20
–15
–10
–5
0
R
L
= 100 Ω
Time (Hr)
CTR (Relative Value)
LONG TERM CTR DEGRADATION
Frequency f (kHz)
Normalized Gain G
V
FREQUENCY RESPONSE
I
F
= 1 mA
Remark The graphs indicate nominal characteristics.
Data Sheet PN10229EJ04V0DS 9
PS2506-1,PS2506L-1
TAPING SPECI F I CATIONS (UNIT : mm)
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
PS2506L-1-F3
1.55±0.1
2.0±0.1
4.0±0.1
1.75±0.1
4.5 MAX.
4.0±0.1
0.4
5.3±0.1
8.0±0.1
7.5±0.1
16.0±0.3
10.3±0.1
1.5
+0.1
–0
φ
Packing: 2 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
100±1.0
2.0±0.5
φ
φ
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
<R>
Data Sheet PN10229EJ04V0DS
10
PS2506-1,PS2506L-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlo rine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220°C
180°C
Package Surface Temperature T (°C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by solderin g iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlo rine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10229EJ04V0DS 11
PS2506-1,PS2506L-1
(4) Cautions
• Fluxes
Avoid rem ovin g the residual flu x with freon-based and chlorine-based cleaning sol vent .
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting v alues before use, since the forward current conditions at CTR meas urement differ according
to prod uct.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10229EJ04V0DS
12
PS2506-1,PS2506L-1
The information in this document is current as of September, 2009. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E0904E
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
PS2506-1,PS2506L-1
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
