To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. Renesas USB Device Renesas Electoronics www.renesas.com 2009.10 State-of-the-art technologies of the Renesas <EQUSB> support the future of society. The USB specification established to connect the PC peripheral equipment is currently used for a number of different products in various scenarios, such as office equipment, mobile devices, AudioVideo equipment, and industrial equipment. For topical On-The-Go, Embedded Host, and advanced Wireless USB, Renesas continues to provide you with the ideal USB devices to meet customer needs. Easy to design A wide variety of lineup from wired USB to wireless USB allows easy design of devices, which are so user-friendly. High quality The Renesas <EQUSB> passed USB Compliance Program. It has been already used in a wide variety of USB embedded products in the market. High performance The original IP library of the Renesas <EQUSB> allows customers to select the most suitable system. Its excellent development environment and our powerful alliances with various partner vendors fully support your system development. Peripheral Road Map Wireless USB Hi-Speed USB2.0 Host Wireless USB ASSP Wireless USB-IP USB ASSP 32bit MCU SuperH Family USB-IP USB ASSP 32bit MCU SuperH Family USB-IP USB ASSP 1 Full-Speed USB2.0 32bit MCU SuperH Family 32/16/8bit MCU H8SX/H8S/M16C/740 Family 32bit MCU SuperH Family USB-IP USB-IP 2 Yamaha Corporation Conference microphone speaker (PJP-25UR) using M30245 Sony Corporation IC Recorder (ICD-SX77/66) using M66592 Ricoh Company, Ltd. Digital Camera (GR DIGITAL) using M66592 Hitachi-Omron Terminal Solutions, Corp. Finger Vein Authentication device using M66291 Pioneer Corporation Plasma TV (North America: PDP-5010FD, Europe: PDP-LX508D) using M66596 Roland Corporation Audio Capture (UA-101) using M66592 Brother Industries, Ltd. Sewing & Embroidery (Innovis4000) using SH7727 Roland Corporation Synthesizer (V-Synth GT) using R8A66597 Panasonic Communications Interactive Panaboard (UB-8325) using M66291 H ub Sony Corporation Visual IC Recorder (ICD-CX50) using M66592 OLYMPUS Imaging Corporation Digital Camera (E-1) using M66591 ub H Hitachi, Ltd. HDD/DVD Hybrid Camcorder (DS-HS803) using M66592 OLYMPUS Imaging Corp. IC Recorder (WS-331M) using M66592 Fostex Company DVD/HD Location Recorder(PD-606) using M66596 Yamaha Corporation High-end microphone speaker for conference (PJP-50USB) using M66291 Sony Corporation Stereo IC Recorder (ICD-MX50) using M66592 Sony Corporation Linear PCM Recorder (PCM-D1) using M66592 ub H Brother Industries, Ltd. Sewing & Embroidery (PR-620) usina SH7727 Fuji Photo Film Co., Ltd. Digital Camera FinePix S7000 using M66591 AI Solutions Barcode label printer (Marvelio(R) TP4030) using M66592 Fostex Company Live Recording Mixer (LR16) using M66596 H ub OLYMPUS Imaging Corp. Digital Camera (-10 DIGITAL) using M66291 OLYMPUS Imaging Corp. IC Recorder (DS-50) using M66592 OLYMPUS Imaging Corp. Linear PCM Recorder (LS-10) using M66592 Fuji Photo Film Co., Ltd. Digital Camera FinePix F710 using M66591 Nagano Japan Radio Co., Ltd. Nameliner (880pro) using M66591 Roland Corporation Recreational keyboard (VIMA RK-300) using R8A66597 Sony Corporation IC Recorder (ICD-ST40) using M66291 Roland Corporation Music Workstation (Fantom-G8/G7/G6) using M66592, R8A66597 Roland Corporation 24bit 96kHz WAVE/MP3 RECORDER (R-09HR) using M66592 Ricoh Company, Ltd. GelSprinter (Aficio GX e3350N) using M66592 Panasonic Corporation System Solutions Company e Passport Reader (JT-P100MR) using M66592 Yamaha Corporation Electone STAGEA (ELS-01U/ELS-01CU) using SH7727 Yamaha Corporation Portable Keyboard (PSR-E413) using 38K0 Sony Corporation Fingerprint Identity Token "PUPPY" FIU-850-C04, FIU-850-D04, FIU-880-C04 using M66592 Ricoh Company, Ltd. Digital Camera (Caplio 500Gwide) using M66592 Renesas <EQUSB>, already available in every field. Various Renesas USB device USB MCU Road Map (SuperH Family) Renesas USB device Website New product :Under development We will comprehensively support customer's development with rich development support information. Hi-Speed USB2.0 SH7264 SH7265 http://www.renesas.com/en/usb SH7205 Please use this contact information for technical inquiries, etc. Various searches Please use the various search functions. SH7786 SH7764 SH-2A 200MHz Dual Core Host + Function SH7263 Contact SH7262 SH2A-FPU 144MHz Host + Function SH7652 SH7203 SH7670 SH2A-FPU 200MHz Host + Function + LCDC SH2A-FPU 200MHz Host + Function+ Ether SH7724 SH-4A 324MHz Host + Function SH-4A 500MHz Host + Function SH7723 SH7722 SH-4A 400MHz Host + Function SH4AL-DSP 333MHz Function Low/Full-Speed USB2.0 SH7763 SH7760 SH-4 200MHz Host + LCDC The hardware manual, the software manual, etc., are available for download. Document SH7727 SH3-DSP 160MHz Host + Function + LCDC Information regarding each device can be accessed from the expansion plan, too. Product expansion SH7720 SH7721 SH3-DSP 133MHz Host + Function + LCDC + SSL SH3-DSP 133MHz Without SSL Full-Speed Function Hi-Speed Function SH7216 SH7705 SH-3 133MHz Low-power Consumption Relevant documents, such as application notes, etc., in addition to the product specifications of each device, are also available for downloading. Lineup SH-4A 266MHz Host + Function + Gbit Ether + PCI USB ASSP Road Map Renesas Original Host SH-2A 100MHz,Function SH7285 SH7286 SH-2A 100MHz Function SH-2A 100MHz Function OHCI Host EHCI Host USB MCU Road Map (M16C, H8SX, H8S, 740 Family) New product New product 32bit MCU Wireless USB Bulk application specialized, high-speed 10-bit A/D and 10-bit D/A, built-in I2C bus H8SX/1655 H8SX/1665 R8A66580 Wireless USB Peripheral Low-power consumption, Small package S/W upward compatibility with wired USB Hi-Speed USB2.0 Bulk application specialized, Built-in I2C bus, 1MB Flash Bulk application specialized, Built-in I2C bus Hi-Speed Host H8SX/1658R H8SX/1653 Bulk application specialized, high-speed 10-bit A/D and 10-bit D/A, sub-clock, built-in I2C bus H8SX/1668R H8SX/1663 Sub clock, SDRAM I/F supported, Bulk application specialized, built-in I2C bus H8SX/1668M H8SX/1658M Bulk application specialized, SDRAM I/F supported, sub-clock, built-in I2C bus, 1MB Flash 16bit MCU M66596 USB HS IP Hi-Speed 1-to-1 Host/ Peripheral function Small Package USB-IP Development M66592 R8A66597 H8S/2456R 2 Port Host/1 Port Peripheral, Corresponding to WTR optional Small Package H8S/2218 ISO Equipped, Low-power Consumption, Small Package Full Function Multiple Endpoint M66591 HS Host IP Bulk Application, Small Package USB HOST IP Development Strengthened FIFO, Peripherals,3V, External Bus Compatible Bulk application H8S/2472 specialized, RTC, sub-clock Bulk application specialized, H8S/2456 Bulk application specialized, SDRAM I/F supported, built-in I2C bus Ethernet, built-in I2C bus H8S/2454 H8S/2215 H8S/2212 M30245 Bulk application specialized, low cost version M16C/6C Bulk application specialized, Built-in I2C bus M16C high-speed clock supported 8bit MCU M66291 System Integration, Enhanced Functions Full-Speed USB2.0 5 FS Host IP USB FS IP USB HOST IP Development 38K0Group Bulk Application Specialized, Small Package, Single-chip 38K2Group Small Package Compound Hub USB-IP Development Full-Speed Function Full-Speed Hub Full-Speed Function Hi-Speed Function Renesas Original Host Wireless USB Function Full-Speed USB2.0 6 Selection Map Wireless USB ASSP New product R8A66580 Package Operating Operation Voltage Temperature (V) 100-pin LFBGA Power Source 3.0 to 3.6 I/O1.6 to 2.0/2.7to3.6 -20 to 85 DMA interface 2ch Other Functions PLL Frequency 16-bit CPU bus interface multiplying 8-bit split bus interface circuit spec Speed*6 Transfer type Wireless USB 1.0 Peripheral 53.3/80/106.7/160/ 200/320/400/480Mbps Ctr.,Bulk,Int. Wireless USB Function FIFO BufferByte) Endpoints(Pipes) Tototal*4 32K 8 Endpoints Supported encryption type Built-in Connection using AESMAC-PHY Interface 128CCM Ver.1.2 UWB PHY USB Port USB Host USB Function Speed*6 Transfer type*7 Endpoints(Pipes) Host Function 1 *3 HS, FS, LS (Host 0nly) Ctr.,Bulk,Int.,Iso. 10 Endpoints USB Function FIFO BufferByte) Tototal*4 Max*5 16K Built-in USB Pull-down Resistor (In Host Mode), Built-in USB output Resistor(In Full-Speed), Built-in USB Pull-up Resistor (In Peripheral Mode) Built-in USB Termination Resistor (In Hi-Speed) 2048 Under development Application Other Functions Vbus Detector Consumer electronics / Digital home appliances, DVC, DSC, IC recorder, DTV, DVD recorder SELECTION MAP USB2.0 Wireless ASSP Operation Voltage (V) Package Power Source 3.0 to 3.6 I/O 1.6 to 2.0/ 2.7 to 3.6 64-pin LQFP,64-pin FBGA Power Source 1:1.35 to 1.65 Power Source 2:3.0 to 3.6, 64-pin VFBGA I/O1.6 to 2.0/2.7 to 3.6 Power Source 1:1.35 to 1.65 64-pin LQFP,64-pin FBGA Power Source 2:3.0 to 3.6, 64-pin VFBGA I/O1.6 to 2.0/2.7 to 3.6 Power Source 3.3 to 3.6 I/O 1.7 to 2.0/ 80-pin LQFP 2.7 to 3.6 Power Source 3.3 to 3.6 48-pin LQFP I/O 2.7 to 3.6/ 52-pin VQFN 4.5 to 5.5 80-pin LQFP 81-pin LFBGA R8A66597 M66596 M66592 ASSP M66591 M66291 Operating Temperature DMA interface -20 to 85 -40 to 85*1 2ch -20 to 85 Other Functions PLL -20 to 85 2ch -20 to 85 1ch -20 to 85 2ch USB Host USB Function Speed*6 Transfer type*7 2 *3 HS,FS, LS(Host only) Ctr.,Bulk,Int.,Iso. 1 *3 HS,FS Ctr.,Bulk,Int.,Iso. 1 HS,FS Ctr.,Bulk,Int.,Iso. 1 HS,FS Ctr.,Bulk,Int. 1 FS Ctr.,Bulk,Int.,Iso. 16-bit CPU bus interface (For address/data bus, there are separate type and multiplex type options) 8-bit split bus interface 2ch Frequency multiplying circuit Endpoints(Pipes) Host Function USB Port 10 Endpoints USB Function FIFO BufferByte) Total*4 Max*5 8.5K 2048 5K 2048 Built-in USB Pull-down Resistor (In Host Mode), Built-in USB Pull-up Resistor (In Peripheral Mode) 8 Endpoints 5K 2048 Built-in USB Pull-up Resistor 7 Endpoints 3.5K 512 USB Pull-up Power Supply Output Terminal, Power Management Support Output Terminal 7 Endpoints 3K 1024 USB Pull-up Power Supply Output Terminal 8 Endpoints Application Other Functions Built-in USB output Resistor(In Full-Speed), Built-in USB Termination Resistor (In Hi-Speed) R8A66597/ M66596 Electronic music instrument, printer, scanner, modem, cellular phone, DVC, DSC, other PC peripheral equipment SH7724/ SH7722/ SH7723 Vbus Detector 8/16-bit CPU bus interface Operating Temperature Package Operation Voltage (V) SH7722 449-pin BGA 1.15 to 1.3V 266MHz , 1.25 to 1.35V 333MHz / 3.0 to 3.6V I/O -20 to 70/ -40 to 85 DMAC x 6ch 149 SH7723 449-pin BGA 1.15 to 1.3V 3.0 to 3.6V I/O -20 to 70/ -40 to 85 DMACx12ch 170 SH7724 449-pin BGA 441-pin POP 1.2 3.0 to 3.6/1.8(I/O),1.8V(DDR) -20 to 70/ -40 to 85 DMACx12ch 180 176-pin QFP(SH7262) 208-pin QFP(SH7264) 1.1 to 1.3V/ 3.0 to 3.6V(I/O) -20 to 85/ -40 to 85 DMACx16ch 99(SH7262) 129(SH7264) SH7262/SH7264 SH7670 256-pin BGA 1.1 to 1.3/3.0 to 3.6 I/O -20 to 70/ -40 to 85 SH7265/SH7205 404-pin BGA 1.1 to 1.3/3.0 to 3.6 I/O SH7764 404-pin BGA SH7203 SH7263 DMAC etc. SH7265/ SH7205/SH7263/ SH7203 Ctr.,Bulk,Int.,Iso. 8 Endpoints 4K 2048 1 *3 HS,FS, LS(Host only) Ctr.,Bulk,Int.,Iso. 10 Endpoints 16K 2048 2 1 1 *3 HS,FS,LS(Host only) Ctr.,Bulk,Int.,Iso. 10 Endpoints 16K 2048 1 *3 HS,FS,LS(Host only) Ctr.,Bulk,Int.,Iso. 10 Endpoints 16K 2048 One-segment navigation, Portable navigation, Portable multimedia player, Camera applicable equipment *3 HS,FS, LS(Host only) Ctr.,Bulk,Int.,Iso. 10 Endpoints 8K 2048 Audio Equipment, Car Audio Equipment, Home Audio Ctr.,Bulk,Int.,Iso. 10 Endpoints 8K 2048 DVD Recorder, Thin TV Set, Audio Compo, Printer, Copy, Industrial Equipment 2048 Audio Equipment, Car Audio Equipment, Home Audio 1 *3 HS,FS, LS(Host only) Ctr.,Bulk,Int.,Iso. 10 Endpoints 5K 2048 Home Audio, Home Server, Car Navigation 1 *3 HS,FS Ctr.,Bulk,Int.,Iso. 8 Endpoints 8K 2048 Audio Equipment, Car Audio Equipment, Industrial Equipment 2 HS,FS,LS Ctr.,Bulk,Int.,Iso. 127 Endpoints 10 Endpoints 10K 2048 Amusement EquipmentNetwork Equipment, Industrial Equipment 2 FS,LS (Host only) Ctr.,Bulk,Int.,Iso. 127 Endpoints 6 Endpoints 544 (double buffer), Host common memory: DDR-SDRAM space DSP,LCDC,Built-in RTC 2 FS,LS(Host only) Ctr.,Bulk,Int.,Iso.(Host only) 127 Endpoints 4 Endpoints 288 (double buffer), Host common memory: SDRAM space USB pull-up control is a general purpose I/O FAX, Printer, DSC, AV Equipment 117 DSP,LCDC,MMCIF, SSL Accelerator,RTC,IrDA,I2C Bus 2 6 Endpoints 544 (double buffer), Host common memory: SDRAM space of area 3 With USB Pull-up Control Terminal FAX, DSC, Printer, IP-phone, Mobile Display Terminal DMACx8ch 70 MAX LCDC,I2C Bus, Audio interface 1 FS,LS Ctr.,Bulk,Int.,Iso. 127 Endpoints Simple Navigation, FA, POS, AV Equipment DMACx8ch DTCx1ch 110 EtherC,I2C,RSPI,CAN,MTU2, MTU2S,CMT,SCI,SCIF,A/D 1 FS Ctr.,Bulk,Int. 4 Endpoints -20 to 85/ -40 to 85 DMACxch 99 SH7786 593-pin BGA 1.25V(typ)/1.5V(typ)/ 3.0-3.6V I/O) -20 to 85/ -40 to 85 DMACx24ch 60 SH7763 449-pin BGAFP 1.15 to 1.35/3.0 to 3.6I/O 2.3 to 2.7DDR -20 to 75 DMACx6ch 107 240-pin HQFP 240-pin CSP 1.75 to 2.05/3.6I/O 160MHz -20 to 75 DMACx4ch 104 -20 to 75 DMACx6ch SH7705 HS,FS 10K 1.1 to 1.3/3.0 to 3.6 I/O SH7285/SH7286 10 Endpoints 240-pin QFP 32bit One-segment navigation, Portable navigation, Portable multimedia player, Camera applicable equipment One-segment navigation, Portable navigation, Portable multimedia player, Camera applicable equipment Ctr.,Bulk,Int.,Iso. 77 1.4 to 1.6/3.0 to 3.6 I/O-20 to 75/-40 to 85 1 Application Other Functions HS,FS, LS(Host only) DMACx6ch 256-pin BGA USB Function FIFO BufferByte) Total*4 Max*5 *3 -20 to 85/ -40 to 85 176-pin LQFP(20mm) 176-pin LQFP(24mm) 3.0 to 3.6 -40 to 85 176-pin BGA(13mm) SH7285:144-pin LGFP20mm -20 to 85/ SH7286:176-pin LQFP20mm 3.0 to 3.6V/4.5 to 5.5V -40 to 85 176-pin LQFP24mm 208-pin LQFP 208-pin CSP 1.4 to 1.6/3.0 to 3.6 I/O -20 to 75 Endpoints(Pipes) Host Function 1.1 to 1.3/3.0 to 3.6 I/O SH7216 Transfer type*7 2 107 SH7760 Speed*6 *3 DMACx14ch 1.4 to 1.6/3.0 to 3.6 I/O USB Function -20 to 70/ -40 to 85 256-pin CSP 17mm 256-pin CSP 11mm SSI, NAND Flash interface, SDHI, IIC3, VDC3 USB Host 1 94 SH7720 SH7721 H.264/MPEG4 codec JPEG codec, LCDC NAND Flash I/F, camera I/F, IIC, SCIF H.264/MPEG4 codec LCDC,SDHI camera I/F,IIC,SCIF ATAPI,2DG H.264/MPEG4 codec LCDC5MpixcecameraI/FJPUSPUFSI ATAPI2DGNAND Flash Interface (MMC4.2) USB Port DMACx8ch DTCx1ch DMACx4ch EtherCSTIF,SSI,SDHI,IIC3 RCAN-TL1,SSIF,AND/ NAND Flash interface IIC3,ATAPI EtherC,LCDC SSI, NAND Flash interface I2Cbus,ATAPI LCDC NAND Flash interface I2Cbus,CAN PCI-e, DU/EtherC NAND Flash interface TMU, I2C, SCIF, SSI etc. Giga Ethernet Controller PCI Bus Controller LCDC, Security Accelerator, MMCIF,RTC,IrDA,I2C Bus SCI,SCIF,SSU,I2C, SH7286:111 SH7286 only ,MTU2,MTU2S, SH728555 CAN CMT,POE,A/D,D/A SH7286 only 105 RTC,IrDA FS,LS (Host only) Ctr.,Bulk,Int.,Iso. 127 Endpoints With USB Pull-up Control Terminal Network Equipment, IT Terminal, Digital Appliance Host-shared memory:Internal 8KByte 288 AC servo, Multi-purpose inverter, Robot Camera applicable equipment 128 Vbus Detector 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 128 AC servo, Multi-purpose inverter, Robot Camera applicable equipment 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 DSC, DVC, Printer, FAX 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 POS Scanner 144-pin LQFP 20mm 145-pin LGA 9mm EXDMAx2ch DMAx4ch DTCx85ch 101 H8SX/1655 120-pin LQFP 14mm EXDMAx2ch DMAx4ch DTCx85ch 84 I2Cx2ch, SCIx6ch, High-speed10bitA/D, 10bitD/A bus interface,PPG,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 POS Scanner H8SX/1668R H8SX/1668M 144-pin LQFP(20mm) 176-pin BGA(13mm) EXDMAx2ch DMAx4ch DTCx85ch 101 I2Cx2ch,SCIx6ch, bus interface,PPG SDRAMI/F,Sub-clock circuit,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 POS Scanner 120-pin LQFP 14mm EXDMAx2ch DMAx4ch DTCx85ch 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 84 10bitD/A bus interface,PPG,SDRAMI/F, 32K Timer,E10A compliant I2Cx2ch,SCIx6ch, bus interface,PPG,E10A compliant POS Scanner 101 I2Cx2ch, SCIx6ch, bus interface,PPG SDRAMI/F,Sub-clock circuit,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 POS Scanner 84 I2Cx2ch,SCIx6ch, bus interface,PPG,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 POS Scanner 128 Ether Net, SCI x3ch,I2Cx6ch, SSUx1ch CRCcalculation circuit,bus interface,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 288 64 Notebook PC, Memory card reader, PC server, other PC peripheral devices H8SX/1663 144-pin LQFP 20mm H8SX/1653 120-pin TQFP 14mm H8S/2472 176-pin BGA 13mm H8S/2456R/2456 144-pin LQFP 20mm EXDMACx2ch DMACx4ch DTCx85ch 114 I2Cx4ch, SCIx5ch,SSUx1ch,bus interface SDRAMI/F(Only R-version),E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 312 128 Printer, Scanner, other peripheral devices H8S/2454 120-pin LQFP 14mm DMACx4ch DTCx85ch 94 I2Cx4ch, SCIx5ch,SSUx1ch Bus interface,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 312 128 Printer, Scanner, other peripheral devices H8S/2215 120-pin TQFP 14mm 112-pin BGA 10mm DMAx4ch DTCx85ch 75 Bus interface,E10A compliant 1 FS Ctr.,Bulk,In.Iso. 9 Endpoints 1288 256 Printer, Scanner, other peripheral devices H8S/2218 100-pin TQFP12mm112-pin BGA10mm DMAx4ch 69 Bus interface,Sub-clock circuit,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 456 128 Printer, Scanner, other peripheral devices DMAx4ch 37 Sub-clock circuit,E10A compliant 1 FS Ctr.,Bulk,Int. 4 Endpoints 456 128 Printer, Scanner, other peripheral devices DMAx4ch 88 I2Cx1ch,SCIx6ch, CRCcalculation circuit(2 types),Sub-clock circuit 1 FS Ctr.,Bulk,Int. 7 Endpoints 584 128 Printer, scanner, other peripheral equipments, consumer equipment, and industrial equipment DMAx4ch *2 83 8 CRCcalculation circuit2 types,Sub-clock circuit 1 FS Ctr.,Bulk,In.Iso. 9 Endpoints 3.2K 1024 1 FS Ctr.,Bulk,In.Iso. 4 Endpoints 1 FS Hub Ctr.,Bulk,In.Iso. 2 Endpoints (Hub) + 4 Endpoints (Function) 64(expanded to built-in RAM)*5 3.0 to 3.6 DMACx4ch DTCx85ch -20 to 75 *1 -40 to 85 DTCx85ch E-DMACx1ch (for Ether net) 16 bit H8S/2212 64-pin LQFP10mm64-pin QFN8mm M16C/6C 100-pin LQFP 14mm M30245 100-pin LQFP 3.0 to 3.6 38K0 64-pin LQFP 0.5mm pitch/0.8mm pitch 3.00 to 5.25 38K2 2.7 to 5.5 -20 to 85 *2 48 4 *2 44 4 Bus interface *1.Wide temperature type *2.LED Drive port *3.When the Function is used, the Host cannot be used. *4.Total number of built-in FIFO *5.Maximum number of bytes allowing set to just one Endpoint. Using the double buffer mode doubles transmission capability. *6.HS: Hi-Speed, FS: Full Speed, LS: Low-Speed *7.Ctr.: Control transfer, Bulk: Bulk transfer, Int.: Interrupt transfer, Iso.: Isochronous transfer 7 SH7216 SH7285/ SH7286 SH7763/ SH7760 SH7720/ SH7721 SH7727/ SH7705 H8SX/ 1665/1655 H8SX/1668R/1668M H8SX/1658R/1658M H8SX/ 1653/1663/ H8S/2472 H8S/2456R 2456/2454 H8S/2212 2215/2218 M16C/6C With USB Pull-up Control Terminal DMACx4ch DTCx85ch SH7670/ SH7764 I2Cx2ch,SCIx6ch,High-speed10bitA/D, H8SX/1665 H8SX/1658R H8SX/1658M M66592/ M66591/ M66291 SH7262/ SH7264 HS,FS, LS(Host only) DMACxch SH7727 Other Functions I/O Ports R8A66580 DVD recorder, Mobile information terminal, Set top box, Audio equipment, DSC, DVC, Printer, External storage equipment MCU 8bit ROAD MAP M30245 38K0 38K2 USB-IP/ ZENER DIODE DEVELOPMENT ENVIRONMENT EVALUATION PRODUCTS EVALUATION BOARD Digital Audio, Other PC Peripheral Devices USB Pull-up Power Supply Output Terminal Wireless USB Function Hi-Speed Function Other PC peripheral devices Full-Speed Function OHCI Host EHCI Host Renesas Original Host 8 The R8A66580 is the controller suitable for embedded application, which directly changes the existing wired Wireless USB Function ASSP Hi-Speed USB2.0 Block diagram WiMedia MAC WiMedia MAC standard 1.0-compliant Self Beaconing Device Sprit Bus 8-bit split bus I/F Wireless USB Transmission rate 53.3/80/106.7/160/200/ 320/400/480Mbps UWB PHY I/F WiMedia MAC-PHY Interface standard 1.2-compliant Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) USB Host *1 1 port Encryption AES-128CCM support by H/W PLL Frequency Multiplier Built-in USB Function *2 1 port External PHY Resume Input Terminal 1 (UWB PHY resume by an external terminal) Interrupt Pin 1-pin polarity set, interrupt source can be assigned Speed HS/FS (USB) LS (USB Host only) Clock Input Frequency 12MHz Vbus Detector USB cable connection/ disconnection detector FIFO 4 32K(Total)*Wireless USB 4 2KMAX*3 16KTotal*USB DMA Interface 2ch (1ch:Used for both Internal and external) Supported application Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory Bus Interface 16-bit separate CPU bus I/F Built-in Resistor Endpoint (Pipe) D+, D- Termination Resistor (Wireless USB) D+, D- Pull-down Resistor (In Host Mode) 8 Endpoints 10 Endpoints (USB) D+ Pull-up Resistor (In Peripheral Mode) Low-Power Sleep State S/W Settable Isochronous Transfer Supported (USB only) Part Number Pin Package Package Code Supply Voltage (V) I/O Voltage (V) Operating Temperature (C) Current Consumption (mA) R8A66580BG 100 LFBGA PLBG0100KA-A 3.3 1.6 to 2.0/2.7 to 3.6 -20 to 85 TBD : New product Flat-screen television Cellular phone HDD recorder Portable audio device Set-top box DSC/DVC Home server Photo frame Audio compo Portable navigation system DVD player IC recorder Electronic datebook PDA Electronic PC peripheral music instrument equipment Electronic keyboard Electronic piano Synthesizer Card reader Printer Scanner PC monitor OA equipment Industrial instrument Modem IT terminal IP telephone POS system Barcode reader ATM Vending machine FA equipment Monitoring camera Camera application Optimum model 9 Car accessory Communication equipment Facsimile Copy machine Complex machine Projector Electronic blackboard Interactive teleconference system TV conference system Car navigation system Car audio system USB IP/ ZENER DIODE Digital AV equipment : Supported model EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT Mobile device 38K0 38K2 Optimum devices are prepared for various applications. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 *1. One stage of an external HUB can be connected (When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.) *2.When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. SH7216 USB SH7265/ SH7205/ SH7724/ M66592/ SELECTION SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP Wireless USB Function Wireless The R8A66580 is a peripheral function controller compliant with "Wireless USB Specification Rev.1.0". It can perform the wireless communication by combining with "MAC-PHY interface Specification Ver.1.2" compliant PHY chip. The features of the R8A66580 are ultra-low power consumption and ultra-small package (5.5mm X 5.5mm). It is suitable for the compact size and battery-driven products such as DSC and portable player etc.. The R8A66580 succeeds the design architecture of Renesas's USB controllers to ensure the compatibility. SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 R8A66580BG ROAD MAP USB product to the wireless USB product. 10 The USB Host can be easily established. The USB memory, Block diagram Part Number R8A66597FP R8A66597DFP R8A66597BG Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory PLL Frequency Multiplier Built-in DMA Interface 2ch Interrupt Pin 1-pin polarity set, interrupt source can be assigned Clock Input Frequency 12/24/48MHz USB Function *2 1 port Vbus Detector USB cable connection/ disconnection detector Split Bus 8-bit Split Bus I/F Built-in Resistor D+, D-Termination Resistor D+, D-Pull-down Resistor (In Host Mode) D+ Pull-up Resistor (In Peripheral Mode) Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) Low-Power Sleep State S/W Settable Bus Interface 16-bit CPU Bus I/F, Separate/Multiplex selectable FIFO 2K (Max)*3 8.5K(Total)*4 Pin Package Package Code Supply Voltage (V) I/O Voltage (V) Operating Temperature (C) 80 80 81 LQFP LQFP LFBGA PLQP0080LA-A PLQP0080LA-A PLBG0081KA-A 3.3 3.3 3.3 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 -20 to 85 -40 to 85 -20 to 85 Isochronous Transfer Supported Current Consumption (mA) HS70 HS70 HS70 FS25 FS25 FS25 Supported application Mobile device Part Number M66592FP M66592WG M66592UG M66591GP Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory with a USB memory and a portable music player. Host and Function Mobile device Part Number Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory USB Power Management Output Function Configured Condition (M66591) Suspend Condition (M66591) FIFO 512(Max)*1 3.5K (Total) *2 (M66591) 2K (Max)*1 5K (Total) *2 (M66592) Endpoint (Pipe) 7 Endpoints (M66591) 8 Endpoints (M66592) Isochronous Transfer Supported (M66592 only) Package Package Code Supply Voltage (V) I/O Voltage (V) Operating Temperature (C) Current Consumption (mA) 64 64 64 80 LQFP FBGA VFBGA LQFP 64P6X-B 64FHX-A 64FHX-C PLQP0080LA-A 1.5/3.3 1.5/3.3 1.5/3.3 3.3 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 1.7 to 2.0/2.7 to 3.6 -20 to 85 -20 to 85 -20 to 85 -20 to 85 HS: 40 FS: 18 HS: 40 FS: 18 HS: 40 FS: 18 184 The M66596 is a USB controller conforming to USB2.0 specifications that are suitable for embedding applications. It is possible to select either a host function or peripheral function by this model's register settings. The Embedded Host can be easily realized and one-to-one high-speed transfer with USB peripheral occurs when the USB host function is selected. The development from the USB peripheral equipment to the USB host equipment can be easily implemented thanks to USB peripheral controller the M66592 and pin compatibility. This product has been developed using Renesas's original USB-IP, and it can be smoothly integrated into a System LSI. The industry leading class high-speed USB data communications are realized. The M66291 supports various Full-Speed Full-Speed USB2.0 Function USB product applications and realizes low power consumption. M66291GP/HP Full-Speed USB2.0 USB ASSP USB Function Block diagram Supported application PLL Frequency Multiplier Built-in Speed HS/FS *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. USB host system. It is suitable for the connection Hi-Speed USB2.0 USB ASSP Low-Power Sleep State S/W Settable (M66592) USB Function 1 port Pin The M66596 can establish a simple and compact M66596FP/WG/UG Built-in Resistor D+, D-Termination Resistor D+ Pull-up Resistor (M66592) Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) Split Bus 8-bit Split Bus I/F Endpoint (Pipe) 10 Endpoints Wide temperature type *1. One stage of an external HUB can be connected (When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.) *2.When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. Hi-Speed USB2.0 Host and Function Vbus Detector USB cable connection/ disconnection detector DMA Interface 2ch (M66592) 1ch (M66591) Speed HS/FS/LS (Host only) Bus Interface 16-bit CPU Bus I/F, Separate/ Multiplex selectable Interrupt Pin 1-pin polarity set, interrupt source can be assigned (M66592 Fix to polarity) The M66291 is a Full-Speed USB peripheral controller complying with USB2.0 specifications. It also flexibly supports a variety of DMA modes thanks to the built-in DMA interface (2-ch) and features selectable polarity. In addition, the M66291 comes equipped with 2 interrupt pins that enable the polarity settings, so various interrupt factors can be allocated freely. The connection to a CPU with a 5V power supply is available because the I/O power supply is 2.7 to 5.5V. This product has been developed using Renesas's original USB-IP, and it can be smoothly integrated into a System LSI. Block diagram Clock Input Frequency 12/24/48MHz PLL Frequency Multiplier Built-in DMA Interface 2ch Interrupt Pin 1-pin polarity set, interrupt source can be assigned Bus Interface 16-bit CPU Bus I/F, Separate/ Multiplex selectable Vbus Detector USB cable connection/ disconnection detector Split Bus 8-bit Split Bus I/F Built-in Resistor D+, D-Termination Resistor D+, D-Pull-down Resistor (In Host Mode) D+ Pull-up Resistor (In Peripheral Mode) Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) Low-Power Sleep State S/W Settable USB Host 1 port Clock Input Frequency 6/12/24/48MHz *3 USB Function *1 1 port Speed HS/FS/LS (Host only) Interrupt Pin 2-pin polarity set, interrupt source can be assigned Package Package Code Supply Voltage (V) I/O Voltage (V) Operating Temperature (C) 64 64 64 LQFP FBGA VFBGA 64P6X-B 64FHX-A 64FHX-C 1.5/3.3 1.5/3.3 1.5/3.3 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 1.6 to 2.0/2.7 to 3.6 -20 to 85 -20 to 85 -20 to 85 *1. When the Function is used, the Host cannot be used. *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO. Current Consumption (mA) HS40 HS40 HS40 FS18 FS18 FS18 FIFO 1K (Max)*1 3K (Total)*2 Bus Interface 8/16 bit CPU Endpoint (Pipe) 7 Endpoints Endpoint (Pipe) 8 Endpoints Isochronous Transfer Supported Speed FS DMA Interface 2ch polarity set, 8/16 bit correspondence FIFO 2K (Max)*2 5K (Total)*3 Pin USB Function 1 port PLL Frequency Multiplier Built-in Supported application Mobile device Part Number M66291GP M66291HP Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) Vbus Detector USB cable connection/ disconnection detector Isochronous Transfer Supported Pin Package Package Code Supply Voltage (V) I/O Voltage (V) Operating Temperature (C) mA(mA) Current Consumption 48 52 LQFP HVQFN PLQP0048KB-A PVQN0052LA-B 3.3 3.3 2.7 to 3.6/4.5 to 5.5 2.7 to 3.6/4.5 to 5.5 -20 to 85 -20 to 85 TBD 15 15 SH7216 Mobile device Clock Input Frequency 12/24/48MHz USB Host *1 2 port SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 Supported application USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT USB Function Block diagram M66596FP M66596WG M66596UG 11 Hi-Speed USB2.0 USB ASSP H8SX/ 1665/ 1655 Embedded Host can be easily realized and the function has been expanded so that the On-the-Go can be realized. In addition, it is now possible to incorporate a large variety of products thanks to the development of products that can tolerate a wide temperature range. This product has been developed using Renesas's original USB-IP, and it can be smoothly integrated into a System LSI. M66591GP The M66591 and M66592 are Hi-Speed USB peripheral controllers complying with USB2.0 specifications. The M66592 furnishes low power consumption in an ultra small 5mm square package (M66592UG) that is suitable for mobile device applications. In addition, the 8-bit split (a DMA interface independent from the CPU bus) furnishes high-speed communications without stressing the CPU. These products has been developed using Renesas's original USB-IP and each can be smoothly integrated into a System LSI. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M The R8A66597 is the USB controller that is the upper model of the M66596. It is possible to select either a host function (up to 2 ports) or 1 port peripheral function by this model's register settings. The host function enables the connection of an external HUB (up to one stage *1) and communications for up to 10 devices. The ROAD MAP industry leading class low power consumption is realized. SH7265/ SH7205/ SH7724/ M66592/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP M66592FP/WG/UG 38K0 38K2 Host and Function with more than one USB device at the same time. USB IP/ ZENER DIODE Hi-Speed USB2.0 USB ASSP small package and Bulk application are mounted. The 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP R8A66597FP/DFP/BG Hi-Speed USB2.0 Function EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT Hi-Speed USB2.0 Host and Function Functions that cover video / music field in addition to keyboard, mouse and multimedia device can be communicated *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. *3. When I/O voltage=2.7 to 3.6V, clock input is 6/12/24/48MHz. When I/O voltage=4.5 to 5.5V, clock input is 24/48MHz. 12 The SH7724 is suitable for the One-segment supported SBSC DDR I/F Supported application IrDA VOU SCIF 6ch EtherMAC 10/100base RWDT Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument CPG PLL/ DLL 2DG 2D Graphic Accelerator KEY Scan INTC CMT 1ch DMAC TMU 12ch 32bx6ch MSIOF/SPI 2ch UBC 2ch L2-Cache 256kB I-Cache 32kB VPU5F MPEG4/H.264 VC1WMV Processing Unit LCD Controller ATAPI ILRAM 16kB MMU TPU 4ch HUDI /AUD I 2C 1ch USB2.0 HS SD/MMC4.2 RTC I/F 1ch Host & Function Car accessory VIO5 5Mpixcel Camera I/F Visual & Graphic Function USB Host *1 2 port 2A-FPU ROM-DEC Speed HS/FS/LS (Host only) JPU FSI SDcard I/F Endpoint (Pipe) 10 Endpoints TS-IF Isochronous Transfer Supported I/O Port SCIF8ch SRAM 1MB/640KB RCAN2ch DMAC 16ch VDC3 Video in Display cnt. WDT Pin Package Package Code R8A77240D500BG R8A77240B500BB 449 441 BGA PRBG0449GA-A PVBG0441KA-B BGA (POP supported) 64KL1, 256KL2 ROM Type* 16K L Supply Voltage Vcc/VccQ Operating Temperature (C) 1.2/3.0 to 3.6,1.8 -40 to 85 -20 to 70 Clock (MHz) 500 :Under development * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO. The SH7722 and SH7723 are suitable for multimedia Hi-Speed USB2.0 Host and Function SH7780 Series equipment that requires high-end and low power at the SH7722/SH7723 navigation equipment and portable media player. same time such as One-segment supported car Hi-Speed USB2.0 32 bit Host and Function The SH7722 (SH-MobileR) is a 32-bit RISC microprocessor embedded with a USB Function conforming to Hi-Speed USB2.0. The operation is available at up to 333MHz, as well as various multimedia support functions such as MPEG4H.264, 2D graphic accelerator, LCD controller, camera interface and sound I/O. The SH7723 (SH-MobileR2) is a 32-bit RISC microprocessor embedded with a USB Host/Function conforming to Hi-Speed USB2.0. The operation is available at up to 400MHz. The SH7723 also has an FPU, the 256KB second cache and various multimedia support functions. The USB module supports all transfer types with USB2.0 specifications. SH7723 block diagram SH-X2 core 400 FPU MHz BSC async memory I/F SBSC DDR I/F FLCTL NAND Flash I/F LCD Controller Supported application VOU Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory I-Cache O-Cache 32kB 32kB MMU VPU5F MPEG4/H.264 VC1 Processing Unit 2DG 2D Graphic Accelerator CPG IrDA PLL/DLL INTC SCIF 6ch MSIOF/SPI 2ch RWDT UBC 2ch ADC 1ch RTC 1ch TPU 4ch KEY Scan CMT 1ch DMAC TMU 12ch 32bx3ch HUDI /AUD I 2C 1ch L2-Cache 256kB VIO5 5Mpixcel Camera I/F Visual & Graphic Function USB Host *1 1 port (SH7723 only) USB Function *2 1 port Speed HS/FS/LS (SH7723: Host only) SIU2 Sound accelerator /DSP Function /Equalizer/Filter FIFO 2K (Max)*3 4K (Total)*4 (SH7722) 2K (Max)*3 16K (Total)*4 (SH7723) ATAPI I/F Endpoint (Pipe) 8 Endpoints (SH7722) 10 Endpoints (SH7723) USB2.0 HS SDcard SDcard Host & Function I/F I/F TS-IF Isochronous Transfer Supported I/O Port SH7722(USB-IP equivalent to M66592 is mounted) SH7723( USB-IP equivalent to R8A66597 is mounted) R8A77220AC266BAV R8A77220AC266BGV R8A77230AC400BG R8A77230AD400BG Memory capacity (Byte) Cache memory RAM Pin Package Package Code 449 BGA PLBG0417KB-A PRBG0449GA-A 64K 449 BGA PRBG0449GA-A 64KL1 256KL2 ROM Type* Supply Voltage Vcc/VccQ 148K L 1.15 to 1.3/3.0 to 3.6 1.25 to 1.35/3.0 to 3.6 16K L 1.15 to 1.3/3.0 to 3.6 Operating Temperature (C) -20 to 70 -40 to 85 -20 to 70 -40 to 85 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. A/D 10bit x 4ch or x 8ch Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory USB Function *2 1 port Speed HS/FS/LS (Host only) FLCTL SDHI RSPI2ch SIOF 1ch FIFO 2K (Max)*3 8K (Total)*4 SRC2ch Decompress Unit Supported application USB Host *1 1 port SSI 4ch PWM timer 10bit x 16ch Endpoint (Pipe) 10 Endpoints (USB-IP equivalent to R8A66597 is mounted) Part Number R5S72620P144FP R5S72621P144FP R5S72622P144FP R5S72623P144FP R5S72620W144FP R5S72621W144FP R5S72622W144FP R5S72623W144FP R5S72624P144FP R5S72625P144FP R5S72626P144FP R5S72627P144FP R5S72624W144FP R5S72625W144FP R5S72626W144FP R5S72627W144FP R5S72640P144FP R5S72641P144FP R5S72642P144FP R5S72643P144FP R5S72640W144FP R5S72641W144FP R5S72642W144FP R5S72643W144FP R5S72644P144FP R5S72645P144FP R5S72646P144FP R5S72647P144FP R5S72644W144FP R5S72645W144FP R5S72646W144FP R5S72647W144FP Pin Package Package Code Memory capacity (Byte) Cache memory RAM ROM Type* Supply Voltage Vcc/VccQ Operating Temperature (C) Clock (MHz) 40 to 85 1088K 20 to 85 176 PLQP0176KB-A 40 to 85 704K 20 to 85 16K QFP L 144 1.1 to 1.3/3.0 to 3.6 40 to 85 1088K 20 to 85 208 ROAD MAP Isochronous Transfer Supported I/O Ports (USB-IP equivalent to R8A66597 is mounted) Memory capacity (Byte) Cache memory RAM Part Number MTU2 16bit x 5ch CMT 16bit x 5ch BSC SRAM,NOR SDRAM, PCMCIA FIFO 2K (Max)*2 16K (Total)*3 24bit Audio DSP Sound Interface RTC URAM 64KB 3ch I2C Bus USB Function 1 port JPEG Processing Unit SPU Cache 4way,16KB SH7216 BSC async memory I/F Block diagram D-Cache 32kB SH7265/ SH7205/ SH7724/ M66592/ SELECTION SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP bit Host and Function The SH7262/7264 is a 32-bit RISC microprocessor embedded with USB Host and Function conforming to Hi-Speed USB2.0 specifications. It has FPU built-in high performance CPU core "SH2A-FPU" and the operation is available at up to a maximum operation frequency of 144MHz. The compressing and expanding processing of audio data such as MP3, WMA and AAC, which is required for audio applications, can be realized in higher speed with smaller program size thanks to high signal processing performance and ROM code efficiency. The USB module supports all transfer types based on the USB2.0 specifications. PLQP0208KB-A 40 to 85 704K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH-4A core 500 FPU MHz USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT Hi-Speed USB2.0 32 Block diagram Part Number 13 SH7262/SH7264 H8SX/ 1665/ 1655 bit Host and Function dashboard equipment and OA/ industrial instrument. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M Hi-Speed USB2.0 32 controller. It is suitable for audio equipment, graphic 38K0 38K2 SH7724 The SH7724 (SH-MobileR2R) is a 32-bit RISC microprocessor with built-in USB Host and Function complying with Hi-Speed USB2.0 specifications. The SH7724 enables 500MHz operation that increasing the speed by approximately 1.3x of that of existing product "SH7723 (SH-MobileR2)", and it also improves the performance and functions for realizing the HD-compliant video playback and recording. 1-port USB host function and 1-port peripheral function can be operated at the same time by setting the register. SRAM, Hi-speed USB controller and video display 20 to 85 :Under development USB IP/ ZENER DIODE and the video recording of HD are also realized. The SH7262/7264 is embedded with high-capacity Hi-Speed USB2.0 Host and Function SH7260 Series EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT PND and car navigation equipment. The playback 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Hi-Speed USB2.0 Host and Function SH7780 Series Clock (MHz) 266 333 400 :New product 14 USB Host *1 2 port SH2A-FPU 200MHz I Cache 8KB D Cache 8KB USB Function *2 1 port SH2A-FPU U Memory (32 KB) EDMAC DMAC 2ch INTC SCIF 3ch SSI2ch DMAC 8ch UBC CAN 2ch URAM 64KB URAM 32KB DMAC Speed HS/FS/LS (Host only) USB Host *1 1 port USB Function *2 1 port Speed HS/FS/LS (Host only) H-UDI FIFO 2K (Max)*3 10K (Total)*4 SSI 6ch INTC Ether MAC Cache 16KB FIFO 2K (Max)*3 8K (Total)*4 HIF FLCTL 2KB Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory WDT A/D 10bitx8ch SCIF 6ch SSU 2ch 2DG V-in V-out 2KB Endpoint (Pipe) 10 Endpoints ATAPI Isochronous Transfer Supported Supported application BSC Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument SD I/F CMT2ch Endpoint (Pipe) 10 Endpoints Car accessory Isochronous Transfer Supported I/O Ports (USB-IP equivalent to R8A66597 is mounted) (USB-IP equivalent to R8A66597 is mounted) Part Number R5S72650P200BG R5S72651P200BG R5S72652P200BG R5S72653P200BG R5S72050W200BG Pin Package 272 BGA Package Code PRBG0272GA-A Memory capacity (Byte) Cache memory RAM 16K 112K ROM Type* L Supply Voltage Vcc/VccQ Operating Temperature (C) -40 to 85 1.1 to 1.3/3.0 to 3.6 Clock (MHz) 200 -20 to 85 * F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. New product The SH7263 is suitable for the digital audio Hi-Speed USB2.0 Host and Function SH7260/SH7200 Series equipment such as car audio and home audio, and the SH7203 is suitable for the industrial instrument such as sequencer and robot. SH7263/SH7203 Hi-Speed USB2.0 32 bit Host and Function The SH7263/SH7203 is a 32-bit RISC microprocessor embedded with USB Host and Function conforming to Hi-Speed USB2.0 specifications. In addition to the 200MHz "SH2A-FPU" core, 16KB cache memory and 80KB internal RAM, the device features abundant peripheral functions such as color LCDC, DMAC, audio interface, CDROM decoder and sampling rate converter. The USB module complies with all transfer types of USB2.0 specifications and is capable of setting the 8KB FIFO up to 8 Endpoints. Part Number R5S76700B200BG R5S76710B200BG R5S76720B200BG R5S76730B200BG R5S76700D133BG R5S76710D133BG R5S76720D133BG R5S76730D133BG Memory capacity (Byte) Cache memory RAM Pin Package Package Code 256 BGA P-LFBGA1717-256 16K 256 BGA P-LFBGA1717-256 16K ROM Type* Supply Voltage Vcc/VccQ Operating Temperature (C) Clock (MHz) 32K L 1.1 to 1.3/3.1 to 3.5 -20 to 70 200 32K L 1.1 to 1.3/3.1 to 3.5 -40 to 85 200 * F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. The SH7764 is suitable for the products for digital audio and multimedia applications such as home audio equipment and car navigation equipment. Hi-Speed USB2.0 Host and Function SH7780 Series SH7764 Hi-Speed USB2.0 32 bit Host and Function Block diagram RTC SH2A-FPU Cache 4Way,16KB I2C bus 4ch ROM-DEC RAM 64KB16KB MTU2 16bitx5ch SSU 2ch BSC ROM,SRAM, SDRAM I/F WDT CMT 16bitx2ch RCAN2ch A/D 10bitx8ch Supported application FLCTL D/A 8bitx2ch Mobile device R5S72630P200FP R5S72631P200FP R5S72632P200FP R5S72633P200FP R5S72030P200FP Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Memory capacity (Byte) Cache memory RAM Car accessory The SH7764 is a high performance microprocessor embedded with USB Host and Function conforming to Hi-Speed USB2.0 specifications, and an FPU with "SH-4A" core. The operation is available at up to 324MHz. The CPU supports 583MIPS at maximum, and the FPU supports single precision and double-precision calculation, up to 2.3GFLOPS. The SH7764 allow high-speed processing of audio codec (WMA/MP3/AAC) and image data (2D/3D), and also, with hardware support for vector operation and sine/cosine operation, it allows high-speed 3D graphics processing. The USB module supports all transfer types based on the USB2.0 specifications with a 5KB FIFO that can be set at a maximum of 10 Endpoints. Block diagram USB Function *1 1 port SH-4A 324MHz Speed HS/FS BSC ROM, SRAM, SDRAM MMU I-Cache 32KB 1ch Endpoint (Pipe) 8 Endpoints Isochronous Transfer Supported (USB-IP equivalent to M66596 is mounted) ROM Type* Supply Voltage Vcc/VccQ Operating Temperature (C) Clock (MHz) Pin Package Package Code 240 QFP QFP3232-240Cu 16K 80K L 1.1 to 1.3/3.0 to 3.6 -40 to 85 200 240 QFP QFP3232-240Cu 16K 80K L 1.1 to 1.36/3.0 to 3.6 -20 to 85 200 RAM 16KB FPU Supported application Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory GPIO USB Host *1 1 port INTC DMAC 6ch I2C I/O Ports Data Cache 32KB USB Function *2 1 port FIFO 2K (Max)*2 8K (Total)*3 SSI 4ch LCDC DMAC 8ch USB Host 1 port SCIF 4ch ROAD MAP I2C CPG H8SX/ 1665/ 1655 Supported application RTC SH7216 SH2A-FPU 200MHz D Cache 8KB SH7265/ SH7205/ SH7724/ M66592/ SELECTION SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP bit Host and Function TMU 32bit 6ch SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 Hi-Speed USB2.0 32 The SH7670 is a 32-bit RISC microprocessor embedded with USB Host and Function conforming to Hi-Speed USB2.0 specifications. It is embedded with 32-bit CPU core "SH2A-FPU" and realizes the high processing function of 480MIPS when the maximum operation frequency is 200MHz. In addition, the Ethernet controller, the host of USB2.0 and the Function are integrated in one chip for the first time in Renesas, so the LAN controller that has been required as an external part and LSI dedicated to USB2.0 can be reduced. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M SH7670 Block diagram I Cache 8KB BSC ROM, SRAM, SDRAM USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT sequencer and monitoring camera. Block diagram Part Number 15 audio compo and the industrial instrument such as 38K0 38K2 bit Host and Function such as DVD recorder, flat-screen television and USB IP/ ZENER DIODE ROAD MAP SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 H8SX/ 1665/ 1655 Hi-Speed USB2.0 32 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M SH7265/SH7205 The SH7265/7205 is a 32-bit RISC microprocessor embedded with 2 ports for a USB Host (2 ports) and Function conforming to Hi-Speed USB2.0 specifications. The SH7625/7205 is a multi-core microcontroller product with two built-in "SH2A-FPUs", and the operation is available at up to a maximum operation frequency of 200MHz. Since each core individually has FPU, the single SH7625/7205 product can operate data processing of industrial instruments or musical devices. In addition, it has various interfaces and peripheral functions. The USB module supports all transfer types based on the USB2.0 specifications with a 10KB FIFO that can be set at a maximum of 10 Endpoints. The SH7670 is suitable for the digital audio equipment Hi-Speed USB2.0 Host and Function SH-Ether Series SRC 2ch Speed HS/FS/LS (Host only) WDT SCIF 3ch SSI 6ch IDE controller 1ch Ether MAC 1ch SDHC I/O 2D Graphic H-UDI NAND Flash I/F FIFO 2K (Max)*3 5K (Total)*4 Endpoint (Pipe) 10 Endpoints VDC2 Digital RGB LCDC EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT The SH7265 is suitable for the dissemination model of car audio, car navigation system and the products for multimedia equipment, and the SH7205 is suitable for the products of consumer equipment and industrial instrument. Hi-Speed USB2.0 Host and Function SH7260 Series Isochronous Transfer Supported (USB-IP equivalent to R8A66597 is mounted) * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. When the Function is used, the Host cannot be used. *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO. Part Number R5S77640N300BG R5S77640P300BG Pin Package Package Code 404 BGA PRBG0404GA-A Memory capacity (Byte) Cache memory RAM 32KB+32KB 16K ROM Type* Supply Voltage Vcc/VccQ Operating Temperature (C) L 1.15 to 1.35/3.0 to 3.6 -40 to 85 -20 to 85 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.) *2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO. Clock (MHz) 324 New product 16 bit time of interrupt, and significantly improves real time performance. Because the USB Function is based on USB2.0 and the USB standard commands and USB state are processed nearly fully automatically with hardware, the system development is simple. Block diagram SCI 4ch SCIF 1ch 2A-FPU BSC SRAM,NOR SDRAM MTU2 16bit x 5ch CMT 16bit x 2ch RAM 128KB/96KB/ 64KB EtherMAC Option 1ch OA equipment Communication equipment Industrial instrument Car accessory DTC Flash UBC FIFO 128 (Max)*1 288 (Total)*2 H-UDI/AUD SCI 4ch WDT SCIF 1ch I2C SSU CAN* DMAC 8ch 12bit A/D Supported application FIFO 128 (Max)*1 288 (Total)*2 Endpoint (Pipe) 4 Endpoints D/A* Isochronous Transfer Not Supported Mobile device I/O Ports Speed FS CMT Endpoint (Pipe) 4 Endpoints Isochronous Transfer Not Supported USB Function 1 port MTU2S Speed FS RCAN-ET 1ch RSPI 1ch Electronic PC peripheral music instrument equipment SH-2A BSC 12bitA/D 4ch x 2Unit MTU2 RAM MTU2S 16bit x 3ch DTC Digital AV equipment USB Function 1 port I2C1ch DMAC 8ch Mobile device memory (SH7286: up to 1MB, SH7285: up to 768KB). A newly embedded register bank allows high-speed register spilling at the Block diagram Supported application high-speed processing. It also has a built-in large-capacity flash Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Car accessory I/O Ports * SH7286 only Package Package Code LQFP 20mm PLQP0176LB-A LQFP 24mm PLQP0176KB-A BGA 13mm PLBG0176GA-A LQFP 20mm PLQP0176LB-A LQFP 24mm PLQP0176KB-A BGA 13mm PLBG0176GA-A 176 LQFP 20mm PLQP0176LB-A LQFP 24mm PLQP0176KB-A BGA 13mm PLBG0176GA-A LQFP 20mm PLQP0176LB-A LQFP 24mm PLQP0176KB-A BGA 13mm PLBG0176GA-A Memory capacity (Byte) ROM RAM 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K 512K 64K 768K 96K 1M 128K * F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. ROM Type* Supply Voltage Vcc Operating Temperature (C) Clock (MHz) Part Number R5F72855N100FP R5F72855D100FP R5F72856N100FP R5F72856D100FP R5F72865N100FP R5F72865D100FP R5F72865N100FA R5F72865D100FA R5F72866N100FP R5F72866D100FP R5F72866N100FA R5F72866D100FA R5F72867N100FP R5F72867D100FP R5F72867N100FA R5F72867D100FA F 3.0 to 3.6 40 to 85 200 Pin 144 Package LQFP Package Code Memory capacity (Byte) ROM RAM 512K 24K 768K 32K 512K 24K ROM Type* Supply Voltage Vcc Operating Temperature (C) Clock (MHz) F 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 3.0 to 3.6/4.5 to 5.5 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 -20 to 85 -40 to 85 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PLQP0144KA-A PLQP0176KB-A PLQP0176LB-A PLQP0176KB-A 176 LQFP 768K 32K 1M 32K PLQP0176LB-A PLQP0176KB-A PLQP0176LB-A * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. 38K0 38K2 R5F72145BDFA R5F72146BDFA R5F72147BDFA R5F72145BDFP R5F72146BDFP R5F72147BDFP R5F72145BDBG R5F72146BDBG R5F72147BDBG R5F72145ADFA R5F72146ADFA R5F72147ADFA R5F72145ADFP R5F72146ADFP R5F72147ADFP R5F72145ADBG R5F72146ADBG R5F72147ADBG R5F72165BDFA R5F72166BDFA R5F72167BDFA R5F72165BDFP R5F72166BDFP R5F72167BDFP R5F72165BDBG R5F72166BDBG R5F72167BDBG R5F72165ADFA R5F72166ADFA R5F72167ADFA R5F72165ADFP R5F72166ADFP R5F72167ADFP R5F72165ADBG R5F72166ADBG R5F72167ADBG Pin USB IP/ ZENER DIODE Part Number SH7216 32 USB Function ROAD MAP realizes the operation of a maximum of 100MHz and 200MIPS Full-Speed USB2.0 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP bit The SH7285/7286 is embedded with 32-bit CPU core "SH-2A" SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 32 USB Function SH7285/SH7286 H8SX/ 1665/ 1655 Full-Speed USB2.0 With the SH7216 series, 32-bit CPU core "SH-2A" is embedded. The increase of consumption current due to speeding up is controlled by incorporating the power supply voltage reduction circuit and reducing the consumption current and the single supply operation at 3.3V is realized for high-speed operation at 200MHz. The peripheral function is embedded with PWM timer and 12-bit A/D converter, and Ethernet, USB and CAN are incorporated as a communication module. :Under development EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT ROAD MAP SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 H8SX/ 1665/ 1655 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M 38K0 38K2 USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT 17 SH7216 The SH7285/7286 is embedded with abundant peripheral functions such as serial interface, multifunctional timer unit and 12-bit A/D converter. It is suitable for AC servo, general-purpose inverter and robot etc. Full-Speed USB2.0 Function SH7280 Series H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M The speed is increased from operation of our company's existing product SH7211 series at 160MHz to 200MHz to realize the improvement of performance by 1.25 times. In addition, 1MB large capacity flash memory and high-capacity RAM are incorporated. Full-Speed USB2.0 Function SH7216 Series 18 various terminal thanks to abundant peripheral functions such as color LCD controller, USB, and the low Block diagram Block diagram RAM 16KB SIOF 3ch SH-4A MPEG-TS I/F DMAC6ch Gbit EtherMAC 10/100/ 1000Mbps 2KB LBSC ROM,SRAM, 8KB Burst ROM, PCMCIA E-DMAC 4ch BSC DDR-SDRAM TSU Bridge Gbit EtherMAC 10/100/ 1000Mbps 8KB SECURITY Accelerator Mobile device Part Number R5S77630AY266BGV R5S77631AY266BGV R5S77632AY266BGV Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 449 449 449 BGA BGA BGA PRBG0449GA-A PRBG0449GA-A PRBG0449GA-A Industrial instrument Memory capacity (Byte) Cache memory RAM 64K 16K 64K 16K 64K 16K Car accessory H-UDI Speed FS/LS (Host only) Isochronous Transfer Supported I/O Ports Operating Temperature (C) Clock (MHz) L L L 1.15 to 1.35/3.0 to 3.6/2.3 to 2.7 1.15 to 1.35/3.0 to 3.6/2.3 to 2.7 1.15 to 1.35/3.0 to 3.6/2.3 to 2.7 -20 to 75 -20 to 75 -20 to 75 266 266 266 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version The SH7760 is suitable for the electronic equipment such as simple navigation system, POS terminal mounted on the color liquid crystal and audio equipment. Full-Speed USB2.0 32 bit OHCI 1.0 Host The SH7760 is a 32-bit RISC microprocessor embedded with USB Host with Low-Speed and Full- Speed OHCI1.0 specifications. In addition to the "SH-4" core with the highly efficient floating point arithmetic unit, 16KB instruction cache memory and 32KB data cache memory, the device features abundant peripheral functions such as 65536-color LCDC, DMAC, UART with FIFO, audio interface, 32-bit automatic reloading timer, WDT. An external bus interface can control FLASH, SRAM, byte control SRAM and SDRAM. Block diagram FPU SH-4 HCAN22ch MMU USB Host 1 port SCIF 3ch Instruction Cache 2way,16KB UBC HSPI/SIM/ MMCIF Speed FS/LS H-UDI BSC ROM,SRAM, Burst ROM SDRAM PCMCIA I/F Operand Cache 2way,32KB HAC/SSI I2C:2ch CMT4ch INTC MFI 2KB Supported application LCDC 640 x 480 Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Part Number Pin Package Package Code HD6417760BL200ADV HD6417760BL200AV 256 256 BGA BGA PLBG0256GB-A PLBG0256GB-A Industrial instrument Memory capacity (Byte) Cache memory RAM 48K 48K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version Car accessory ROM Type* L L FIFO Host-shared Memory: Dedicated RAM 8K DMAC 8ch CPG/WDT TMU3ch A/D 10bit x 4ch Endpoint (Pipe) 127 Endpoints Isochronous Transfer Supported I/O Ports Supply Voltage 7EE7EER 1.4 to 1.6/3.0 to 3.6 1.4 to 1.6/3.0 to 3.6 Operating Temperature (C) Clock (MHz) -40 to 85 -20 to 75 200 200 SCIF0/IrDA SCIF1 Cache 4Way,32KB SSL Accelerator SIM MMCIF Endpoint (Pipe) 127 Endpoints (Host), 6 Endpoints (Function) Supply Voltage Vcc/VccQ SH7760 BSC ROM,SRAM, Burst ROM, SDRAM I/F FIFO 544 (Double buffer), Host-shared Memory: DDR-SDRAM Space ROM Type* Full-Speed USBOHCl1.0 Host SH7750 Series UBC 6KB 2KB MMU X/YRAM 8KBx2 SIOF 2ch USB Function 1 port LCDC H-UDI Supported application SH3-DSP PCIC Cache 4Way,64KB UBC USB Host 1 port DMAC 6ch PCC Supported application Mobile device Part Number HD6417720BP133CV HD6417720BL133CV HD6417320BP133CV HD6417320BL133CV R8A77210C133BGV R8A77210C133BAV R8A77211C133BGV R8A77211C133BAV Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Memory capacity (Byte) Cache memory RAM Car accessory RTC USB Host 1 port USB Function 1 port I2C busI/F Multi-master CMT 32bitx5ch TPU 16bitx4ch TMU 32bitx3ch Color LCDC INTC A/D 10bitx4ch AFEIF CPG/PLL D/A 8bitx2ch Speed FS/LS (Host only) FIFO 544 (Double buffer), Host-shared Memory: SDRAM Space of Area 3 Endpoint (Pipe) 127 Endpoints (Host), 6 Endpoints (Function) Isochronous Transfer Supported I/O Ports ROM Type* Supply Voltage 7DD7DD2 Operating Temperature (C) Clock (MHz) 16K L 1.4 to 1.6/3.0 to 3.6 -20 to 75 133 32K 16K L 1.4 to 1.6/3.0 to 3.6 -20 to 75 133 PLBG0256GA-A 32K 16K L 1.4 to 1.6/3.0 to 3.6 -20 to 75 133 PLBG0256GA-A 32K 16K L 1.4 to 1.6/3.0 to 3.6 -20 to 75 133 Pin Package Package Code 256 CSP PLBG0256GA-A 32K 256 CSP PLBG0256GA-A 256 CSP 256 CSP * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version SH7216 Host and Function The SH7720/SH7721 adopts "SH3-DSP" core and is embedded with abundant peripheral functions such as color LCD controller, SSL security accelerator (SH7720 only), USB Host / Function (full speed) and various card interfaces. These functions can realize the high-cost performance system and it can be applied to the mobile terminal by utilizing the low power consumption mode. ROAD MAP power consumption. Full-Speed USB2.0 bit OA equipment, industrial instrument and mobile SH7720/SH7721 32 for SH7265/ SH7205/ SH7724/ M66592/ SELECTION SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP bit Host and Function suitable SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 Full-Speed USB2.0 32 The SH7763 adopts "SH-4A" core and is embedded with various peripheral functions such as gigabit Ethernet controller, PCI bus controller, color LCD controller, security accelerator (can be selected with lineup), USB Host/Function (full speed). The SH7763 can support various systems and realizes the superior cost performance by selecting these functions as occasion demands. is H8SX/ 1665/ 1655 SH7763 Full-Speed USB2.0 Function and OHCI1.0 Host SH7700 Series SH7720/SH7721 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M OA and industrial instruments widely. The 38K0 38K2 with USB IP/ ZENER DIODE embedded controller. It can support the network equipment, USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT is peripheral functions such as gigabit Ethernet 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Full-Speed USB2.0 Function and OHCI1.0 Host SH7700 Series SH7763 EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT The H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M instruments. Full-Speed USB2.0 32 bit Host and Function The SH7727 adopts "SH3-DSP" core and is embedded with peripheral functions such as color LCD controller, USB Host/Function (full speed). It is suitable for OA equipment and industrial instruments. The operation frequency can be selected from 160MHz and 100MHz, and the package type can be selected from HQFP and CSP. H8SX/1665/1655 Group Full-Speed USB2.0 32 bit USB Function Block diagram H8SX/1665 Group block diagram MMU SH3-DSP UBC H-UDI X/Y RAM 8KB x 2 Cache 4way,16KB BSC ROM,SRAM, Burst ROM SDRAM PCMCIA I/F DMAC 4ch TMU 32bit x 3ch CMT 16bit x 1ch Supported application Mobile device Part Number HD6417727F160CV HD6417727F100CV HD6417727BP160CV HD6417727BP100CV Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 240 HQFP PRQP0240KC-B 240 CSP PLBG0240JA-A Industrial instrument Memory capacity (Byte) Cache memory RAM 16K 16K 16K 16K 16K 16K 16K 16K CPG/WDT AF EIF RTC Color LCDC DMAC 10bit x 6ch Car accessory INTC SIOF1ch Audio Codec D/A 8bit x 2ch I/O Ports Operating Temperature (C) Clock (MHz) L L L L 1.75 to 2.05/3.0 to 3.6 1.6 to 2.05/2.6 to 3.6 1.75 to 2.05/3.0 to 3.6 1.6 to 2.05/2.6 to 3.6 -20 to 75 -20 to 75 -20 to 75 -20 to 75 160 100 160 100 The SH7705 is suitable for the mobile terminal that requires high-speed processing and low power consumption at the same time thanks to built-in strong power management function. Full-Speed USB2.0 bit USB Function The SH7705 is embedded with abundant peripheral functions such as DMAC, serial interface, IrDA1.0, RTC and WDT in addition to high-end "SH-3" core and large-capacity cache memory of 32KB. The external bus interface can be directly connected to Flash, ROM, SRAM, byte-select SRAM, as well as 512Mbit large-capacity SDRAM. For the USB module, because the USB standard commands and USB state are processed nearly fully automatically with hardware, the system development is simple. With the bulk Endpoint engineered in a double-buffer mode, the high-speed transmission becomes a reality. Block diagram MMU SCIFO/IrDA USB Function 1 port SH-3 USB Function 1 port PLL TMR (8-bit timer): 8ch Speed FS WDT DTC EXDMAC:4ch ADC10bit:4ch Endpoint (Pipe) 127 Endpoints (Host), 6 Endpoints (Function) Isochronous Transfer Supported (Host only) RAM BSC SDRAM I/F added DMAC:4ch FIFO 288 (Double buffer), Host-shared Memory: SDRAM Space * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version 32 PPG 16bit Speed FS/LS (Host only) SCIF 1ch ROM FLASH TPU (16-bit timer) 6ch SCI 1ch Supply Voltage V SH7705 TPU (16-bit timer) 6ch PPG 16bit ROM Type* Full-Speed USB2.0 Function SH7700 Series H8SX-CPU @50MHz USB Host 1 port USB Function 1 port INTC PCC The H8SX/1665/1655 Group mounts high-speed "H8SX CPU" core with a maximum operation frequency of 50MHz and incorporates 512KB/384KB large-capacity flash memory and 40KB RAM. This H8SX/1668/1658 product group offers pin function upward compatibility and peripheral functions such as high-speed 10bit-A/D and 10bitD/A, are strengthened. For the USB module, because the USB standard commands and USB state are processed nearly fully automatically with hardware, the system development is simple. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. Supported application Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Part Number Pin Package Package Code R5F61665* 50FPV R5F61662* 50FPV R5F61665* 50LPV R5F61662* 50LPV R5F61655* 50FPV R5F61652* 50FPV 144 144 145 145 120 120 LQFP LQFP LGA LGA LQFP LQFP PLQP0144RA-A PLQP0144RA-A PTLG0145JB-A PTLG0145JB-A PLQP0120LA-A PLQP0120LA-A Industrial instrument Memory capacity (Byte) RAM ROM 40K 512K 40K 384K 40K 512K 40K 384K 40K 512K 40K 384K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. Car accessory FIFO 64 (Max)*1 288 (Total)*2 DAC 10bit:2ch ADC10bit:4ch I/O Port SCI:6ch I2C:2ch H-UDI UBC JTAG I/F 32KHz Sub-clock Endpoint (Pipe) 4 Endpoints ROAD MAP SH7727 SH7216 It is suitable for OA equipment and industrial Full-Speed USB2.0 Function H8SX Family SH7265/ SH7205/ SH7724/ M66592/ SELECTION SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP LCD controller and USB. Isochronous Transfer Not Supported ROM Type* Supply Voltage V Operating Temperature (C) Clock (MHz) 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 -20 to 75 -40 to 85 -20 to 75 -40 to 85 -20 to 75 -40 to 85 -20 to 75 -40 to 85 -20 to 75 -40 to 85 -20 to 75 -40 to 85 50 50 50 50 50 50 *: Clarifying quality grade New product SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 functions such as high-end SH3-DSP core, color H8SX/ 1665/ 1655 H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Full-Speed USB2.0 Function and OHCI1.0 Host SH7700 Series The H8SX/1665/1655 Group offers the optimum solution to consumer, industrial and OA equipment. It can be also applied to POS terminal and IC card transaction terminal etc. in a combination with Secure IC. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M The SH7727 is embedded with peripheral EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT Speed FS H-UDI BSC ROM,SRAM, Burst ROM SDRAM I/F TPU 16bit x 4ch RTC CMT 16bit x 1ch Supported application INTC Mobile device Part Number HD6417705F133B HD6417705F100B HD6417705BP133B HD6417705BP100B Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 208 LQFP PLQP0208KA-A 208 CSP TTBG0208JA-A Industrial instrument Memory capacity (Byte) Cache memory RAM 32K 32K 32K 32K Car accessory FIFO 64 (Max)*1 288 (Total)*2 DMAC 4ch Endpoint (Pipe) 4 Endpoints A/D 10bit x 4ch CPG/WDT Isochronous Transfer Not Supported I/O Ports ROM Type* Supply Voltage Vcc/VccQ Operating Temperature (C) Clock (MHz) L L L L 1.4 to 1.6/3.0 to 3.6 1.4 to 1.6/3.0 to 3.6 1.4 to 1.6/3.0 to 3.6 1.4 to 1.6/3.0 to 3.6 -20 to 75 -20 to 75 -20 to 75 -20 to 75 133 100 133 100 38K0 38K2 TMU 32bit x 3ch USB IP/ ZENER DIODE USB IP/ ZENER DIODE UBC EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT 38K0 38K2 SCIF2 Cache 4way,32KB * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. 21 22 bit USB Function H8SX/1665 Group block diagram BSC SDRAM I/F added ROM FLASH TMR (8-bit timer): 8ch BSC SDRAM I/F added INTC TPU (16-bit timer) 6ch Speed FS PPG 16bit WDT DTC EXDMAC:4ch ADC10bit:4ch ADC10bit:4ch Supported application Mobile device Part Number R5F61668R*50FPV R5F61668M*50FPV R5F61664R*50FPV R5F61664M*50FPV R5F61663R*50FPV R5F61663M*50FPV R5F61668R*50BGV R5F61668M*50BGV R5F61664R*50BGV R5F61664M*50BGV R5F61663R*50BGV R5F61663M*50BGV R5F61658R*50FPV R5F61658M*50FPV R5F61654R*50FPV R5F61654M*50FPV R5F61653R*50FPV R5F61653M*50FPV Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Memory capacity (Byte) RAM ROM Pin Package Package Code 144 LQFP PLQP0144KA-A 1M 144 LQFP PLQP0144KA-A 512K Car accessory SCI:6ch I2C:2ch H-UDI UBC JTAG I/F 32KHz Sub-clock Operating Temperature (C) Isochronous Transfer Not Supported SCI:6ch Supported application Mobile device Clock (MHz) ROM Type* Supply Voltage (V) 56K 3.0 to 3.6 -20 to 75-40 to 85 50 40K 3.0 to 3.6 -20 to 75-40 to 85 50 LQFP PLQP0144KA-A 384K 40K 3.0 to 3.6 -20 to 75-40 to 85 50 176 BGA PLBG0176GA-A 1M 56K 3.0 to 3.6 -20 to 75-40 to 85 50 176 BGA PLBG0176GA-A 512K 40K 3.0 to 3.6 -20 to 75-40 to 85 50 176 BGA PLBG0176GA-A 384K 40K 3.0 to 3.6 -20 to 75-40 to 85 50 120 LQFP PLQP0120LA-A 1M 56K 3.0 to 3.6 -20 to 75-40 to 85 50 120 LQFP PLQP0120LA-A 512K 40K 3.0 to 3.6 -20 to 75-40 to 85 50 120 LQFP PLQP0120LA-A 384K 40K 3.0 to 3.6 -20 to 75-40 to 85 50 *: Clarifying quality grade Part Number R5F61653*50FTV R5F61654*50FTV R5F61664*50FPV R5F61663*50FPV Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Industrial instrument Memory capacity (Byte) Cache memory RAM Pin Package Package Code 120 LQFP PTQP0120LA-A 144 LQFP PLQP0144KA-A 384K 512K 384K 512K 40K 40K 40K 40K Isochronous Transfer Not Supported Car accessory H-UDI 32KHz Sub-clock ROM Type* Supply Voltage V Operating Temperature (C) Clock (MHz) 3.0 to 3.6 -20 to 75-40 to 85 50 3.0 to 3.6 -20 to 75-40 to 85 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. 50 *: Clarifying quality grade The H8S/2472 Group is a single chip MCU with built-in Full-Speed USB2.0 Function H8S Family Flash/RAM, which realizes Ether communications. H8S/2472 Group The H8S/2472 Group is embedded with high-speed CPU with 34MHz (at four times greater than 8.5MHz) operation, 512KB large-capacity flash memory and 40KB RAM. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. The on-chip emulator E10A-USB conforming to JTAGI/F is also prepared to provide the development with a cheaper development tool. It can be applied as a gateway of Ethernet and USB. Full-Speed USB2.0 16 bit USB Function Block diagram Clock Oscillator H8S-CPU BSC Multiplier ROM RAM USB Function 1 port INTC TMR (16-bit timer): 12ch Speed FS TMR (8-bit timer): 2ch DTC 14-bit PWM Timer: 4ch FIFO 64 (Max)*1 288 (Total)*2 SCI:2ch WDT:2ch SCI with FIFO: 1ch Synchronous Serial Communication Unit: 1ch A/D 10bit:8ch Supported application Boundary scan Mobile device Part Number R4F2472VBR*V ROAD MAP I2C:2ch USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT Endpoint (Pipe) 4 Endpoints I/O Port CRC calculation circuit Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 176 BGA PLBG0176GA-A Industrial instrument Memory capacity (Byte) ROM RAM 512K 40K Car accessory ROM Type* * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. 23 Speed FS FIFO 64 (Max)*1 288 (Total)*2 DAC 8bit:2ch ADC 10bit:8ch Endpoint (Pipe) 4 Endpoints USB Function 1 port DTC DMAC:4ch 144 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. WDT FIFO 64 (Max)*1 288 (Total)*2 DAC 10bit:2ch I/O Port PLL TMR (8-bit timer): 8ch PPG DMAC:4ch Clock Oscillator RAM TPU (16-bit timer) 6ch PPG 16bit H8SX-CPU @50MHz USB Function 1 port SH7216 TPU (16-bit timer) 6ch Block diagram RAM SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 INTC ROM FLASH H8SX/ 1665/ 1655 H8SX-CPU @50MHz SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP Full-Speed USB2.0 32 The H8SX/1653/1663 Group mounts a high-speed "H8SX CPU" core with 50MHz maximum operation frequencies and incorporates 512K/384KB large-capacity flash memory and 40KB RAM. This H8SX/1653/1663 product group offers abundant peripheral functions such as data transfer function, SCI (Smart Card I/F, supporting High-Speed SCI), timer, A/D, D/A. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M bit USB Function H8SX/1653/1663 Group 38K0 38K2 Full-Speed USB2.0 32 The H8SX/1668R/1668M Group and the H8SX/1658R/1658M Group mount high-speed "H8SX CPU" core with 50MHz maximum operation frequencies and incorporate the 1MB/512KB/384KB large-capacity flash memory and 56KB/40KB RAM. This H8SX/1663/1653 product Group offers pin function upward compatibility and peripheral functions such as AD, TPU and EXDMAC, are strengthened. In addition, H8SX/1668M and H8SX/1658M have an LVD/POR function that allows the reduction of external parts. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. Full-Speed USB2.0 Function H8SX Family I2C-Bus:6ch Endpoint (Pipe) 4 Endpoints EtherC LPC PLL I/O port Supply Voltage V 3.0 to 3.6 Operating Temperature (C) -20 to 75 -40 to 85 Isochronous Transfer Not Supported USB IP/ ZENER DIODE H8SX/1668R/1668M Group H8SX/1658R/1658M Group The H8SX/1653/1663 Group incorporates abundant peripheral functions such as high-end H8SX CPU core and USB communications in a compact package. The USB communications with PC and the system control are balances. EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT The H8SX/1668R/1668M Group incorporates low voltage detection circuit and power-on reset in addition to the functions of H8SX/1665/1655 Group. The usability has been improved to reduce the external parts. 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Full-Speed USB2.0 Function H8SX Family Clock (MHz) 34 *: Clarifying quality grade 24 BSC H8SS/2218 Group block diagram ROM RAM Clock Oscillator H8S-CPU USB Function 1 port ROM BSC Multiplier RAM WDT INTC Speed FS Speed FS DMAC DMAC SCI TPU (16-bit timer): 3ch EXDMAC I2C-Bus:4ch FIFO 128 (Max)*1 312 (Total)*2 SCI:2ch DTC A/D 10bit:8ch x 2 Unit I/O port TPU (16-bit timer): 12ch Supported application PPG Mobile device Part Number R4F24569*VRFQV R4F24568*VRFQV R4F24565*VRFQV R4S24562*VRFQV R4S24561*VRFQV R4F24569*VFQV R4F24568*VFQV R4F24565*VFQV R4S24562*VFQV R4S24561*VFQV R4F24549*VFPV R4F24548*VFPV R4F24545*VFPV R4S24542*VFPV R4S24541*VFPV Digital AV equipment Pin 144 144 120 Electronic PC peripheral music instrument equipment Package LQFP LQFP LQFP OA equipment Communication equipment Package Code PLQP0144KA-A PLQP0144KA-A PLQ0120LA-A Industrial instrument Memory capacity (Byte) ROM RAM 256K 64K 256K 48K 128K 64K 48K 256K 64K 256K 48K 128K 64K 48K 256K 64K 256K 48K 128K 64K 48K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. D/A 8bit:2ch TMR (8-bit timer): 8ch ROM Type* Supply Voltage V Operating Temperature (C) 3.0 to 3.6 3.0 to 3.6 -20 to 75-40 to 85 -20 to 75-40 to 85 -20 to 75-40 to 85 Isochronous Transfer Not Supported INTC Clock (MHz) 32 32 32 *: Clarifying quality grade New product Supported application Mobile device Part Number HD64F2212FP HD64F2211FP HD6432211 ***FP HD6432210 ***FP HD64F2215RTE HD64F2215TTE HD64F2215TE HD64F2215RBR HD64F2215TBR HD64F2215BR HD6432215B ***TE HD6432215C ***TE HD6432215B ***BR HD6432215C ***BR HD64F2218TF HD6432217 ***TF HD64F2218BR HD6432217 ***BR Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 64 LQFP PLQP0064KC-A 120 TQFP PTQP0120LA-A 112 P-LFBGA PLBG0112GA-A 120 TQFP PTQP0120LA-A 112 P-LFBGA PLBG0112GA-A 100 TQFP PTQP0100LC-A 112 P-LFBG PLBG0112GA-A Industrial instrument Memory capacity (Byte) RAM ROM 12K 128K 8K 64K 8K 64K 4K 32K 20K 256K 20K 256K 16K 256K 20K 256K 20K 256K 16K 256K 16K 128K 8K 64K 16K 128K 8K 64K 12K 128K 8K 64K 12K 128K 8K 64K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. Car accessory ROM Type* M M M M M M M M H-UDI FIFO 128 (Max)*1 456 (Total)*2 (2212, 2218) 256 (Max)*1 1288 (Total)*2 (2215) Endpoint (Pipe) 4 Endpoints (2212, 2218), 9 Endpoints (2215) Boundary scan H-UDI 3.0 to 3.6 WDT A/D 10bit:6ch Endpoint (Pipe) 4 Endpoints SSU Car accessory USB Function 1 port INTC SH7216 Clock Oscillator H8S-CPU SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP H8SS/2456R Group block diagram I/O port Sub-clock Oscillator Isochronous Transfer Supported (2215 only) Supply Voltage V Operating Temperature (C) Clock (MHz) 3.0 to 3.6 -20 to 75-40 to 85* 24 -20 to 75-40 to 85* 3.0 to 3.6 -20 to 75-40 to 85* 24/48 24/48 16/48 24/48 24/48 16/48 -20 to 75-40 to 85* 3.0 to 3.6 16/48 -20 to 75-40 to 85* -20 to 75-40 to 85* 3.0 to 3.6 24 -20 to 75-40 to 85* *: Wide temperature type SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 bit USB Function H8SX/ 1665/ 1655 Full-Speed USB2.0 16 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M bit USB Function In addition to high-speed CPU with 24MHz operation and 128KB/256KB large-capacity flash memory, the H8S/2212/2215/2218 Group is embedded with abundant peripheral functions such as DMAC, serial interface, 16-bit timer, RTC and WDT. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Supports is furnished for 4 type (H8S/2215 Group) and 3-type (H8S/2212 and 2218 Groups) transfer modes, and because the bulk Endpoint (the H8S/2215 Group has isochronous support) is engineered with a double-buffer mode, the high-speed data transfer becomes a reality. Through USB, meanwhile, an onboard rewritable flash memory version is also available. 38K0 38K2 Full-Speed USB2.0 16 H8S/2212/2215/2218 Group USB IP/ ZENER DIODE H8S/2456R/2456/2454 Group In addition to the high-speed 32MHz (double speed of 16MHz) CPU, 256KB flash memory and 64KB RAM, the H8S/2456R/2456/2454 Group is embedded with abundant peripheral functions such as serial interface (Smart Card I/F), I2C bus, 16-bit timer, 8-bit timer and synchronous serial communication. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. The E10A-USB on-chip emulator conforming to JTAG I/F is also prepared to provide the development with a cheaper development tool. thanks to multichannel serial interface and timer unit. EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT ROAD MAP SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 H8SX/ 1665/ 1655 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M 38K0 38K2 USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT 25 applications of consumer, industrial and OA equipment Full-Speed USB2.0 Function H8S Family ROAD MAP The H8S/2212/2215/2218 Group is equipped with a strong communication function. The power management functions such as sleep mode and standby mode are incorporated and these groups are suitable for the mobile equipment that requires low power consumption at the same time. The H8S/2456R/2456/2454 Group can be applied to various Full-Speed USB2.0 Function H8S Family 26 The M16C/6C Group mounts a high-end M16C SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 H8SX/ 1665/ 1655 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M 38K0 38K2 USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT 27 Block diagram Block diagram M16C/60 CPU Core 32MHz Multiplier PLL Sub-clock 32kHz OCO(125kHz) Three-phase Motor Cont Timer A 5ch Flash Memory Data Flash User Boot Supported application Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Part Number Pin Package Package Code R5F36CAMNFB R5F36CAMDFB R5F36CAMNFA R5F36CAMDFA R5F36CAKNFB R5F36CAKDFB R5F36CAKNFA R5F36CAKDFA R5F36CAENFB R5F36CAEDFB R5F36CAENFA R5F36CAEDFA R5F36CA6NFB R5F36CA6DFB R5F36CA6NFA R5F36CA6DFA 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP LQFP PLQP0100KB-A PLQP0100KB-A PRQP0100JD-B PRQP0100JD-B PLQP0100KB-A PLQP0100KB-A PRQP0100JD-B PRQP0100JD-B PLQP0100KB-A PLQP0100KB-A PRQP0100JD-B PRQP0100JD-B PLQP0100KB-A PLQP0100KB-A PRQP0100JD-B PRQP0100JD-B Industrial instrument Memory capacity (Byte) RAM ROM 31K 512K 31K 512K 31K 512K 31K 512K 31K 384K 31K 384K 31K 384K 31K 384K 20K 256K 20K 256K 20K 256K 20K 256K 12K 128K 12K 128K 12K 128K 12K 128K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. 8bit D/A x 2ch Serial I/O Multi-functionalx4ch FIFO 128 (Max)*1 584 (Total)*2 Timer Multi-functional 16-bitx5 DMAC 4ch RTC 1 week LVD On-Chip-Debug PWM 2ch POR OCO(40MHz) Timer S Car accessory Minimum Instruction Execution Time 62.5ns A/D Converter 10-bitx8ch Speed FS HW-I2C bus 10bit A/D x 2 26ch Oscillation Circuit 2 circuits DMA Controller 4ch SIO/UART 6ch (I2C bus/IE Bus) CRC RAM External Memory Memory Expansion Mode, Microprocessor Mode (Programmable-Wait Function) WDT Interrupt Timer B 6ch USB Function 1 port Power Source for USB Pull-up D+ Pull-up Power Source (Supply Control) Endpoint (Pipe) 7 Endpoints I/O Ports Input: 1 Programmable I/O: 82 Supported application Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Isochronous Transfer Not Supported Part Number 88 I/O pins ROM Type* Supply Voltage V Operating Temperature (C) Clock (MHz) F F F F F F F F F F F F F F F F 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 20 to 85 40 to 85 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 :New product M30245M8-XXXGP M30245MC-XXXGP M30245FCGP Pin Package Package Code 100 100 100 LQFP LQFP LQFP PTQP0100KB-A PTQP0100KB-A PTQP0100KB-A Industrial instrument Memory capacity (Byte) RAM ROM 5K 64K 10K 128K 10K 128K * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. Total number of built-in FIFO. PLL Frequency Multiplier Built-in (USB48MHz generated internally) CRC Calculation Circuit Selectable from 2 circuits (CRC-CCITT/CRC16) Watchdog Timer 1 channel USB Function 1 port Speed FS FIFO 1K (Max)*1 3.2K (Total)*2 ROAD MAP SH7216 bit USB Function SH7265/ SH7205/ SH7724/ M66592/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP Full-Speed USB2.0 16 The M30245 (M16C/24 Group) consists of 16-bit single-chip MCUs with built in USB function control unit confirming to Full-Speed USB2.0 specifications. With "M16C CPU" embedded at the core, the M16C family is equipped with abundant peripheral functions and high-speed processing in addition to USB pull-up power source circuit, USB clock generator and various USB control functions. The addition of a multi-bit serial I/O enables an audio interface function, while the greater CRC calculating function enhances the memory card interface. In addition, other steps facilitating the audio application are implemented, making this system simple to configure for use in memory card application fields. Endpoint (Pipe) 9 Endpoints Vbus Detector USB cable connection/ disconnection detector Isochronous Transfer Supported Car accessory Interrupt Factor 33 Pull-up I/O Port 80 (4-port unit) ROM Type* Supply Voltage V Operating Temperature (C) Clock (MHz) M M F 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 20 to 85 20 to 85 20 to 85 16 16 16 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 bit USB Function M30245 H8SX/ 1665/ 1655 Full-Speed USB2.0 16 The M16C/6C Group offers the compatibility with the M16C/6x Group. In addition to various peripheral functions, built-in two circuits of A/D converter and a 16-bit IC/OC timer have enriched the peripheral functions furthermore. The system development is simple and allows the USB module to process USB standard commands and virtually automatic USB state using the hardware. Three types of transfer modes (Control, Bulk and Interrupt) are supported and with a bulk Endpoint engineered with a double buffer composition, the high-speed data transmission becomes a reality. For the development environment, a single wire on-chip debugger E8a is available to make the development process simpler by a customer. card interface are incorporated. peripheral H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M M16C/6C Group incorporated. isochronous Abundant functions such as audio interface and memory 38K0 38K2 Up to 512KB flash memory and 31KB RAM are supports USB IP/ ZENER DIODE operation for M16C/60 series. The M30245 Group is the M16C CPU core that Full-Speed USB2.0 Function M16C/20 Series EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT CPU core to realize the highest 32MHz SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Full-Speed USB2.0 Function M16C/6C Series 28 The 38K0 Group is specialized for Bulk bit USB Function Block diagram USB Host-IP consists of OHCI Host-IP, EHCI Host-IP and Renesas original Host-IP, which is librarized Renesas USB ASSP. It is possible to choose a number of Endpoints and FIFO capacity according to the system. *1. It does not support High Band Width of Isochronous and Interrupt type. One stage of an external HUB can be connected (When the Full-Speed function is connected via Hi-Speed hub, the pay load of Isochronous corresponds to 188 bytes or less.) ROAD MAP USB Communication Function FS/LS (OHCI) USB Communication Function HS/FS/LS (EHCI, Renesas original*1) FIFO Special memory (with modifiable size) or external memory area available (OHCI, EHCI) Special memory 16KByte (Max) (Renesas original) Endpoint (Pipe) 32 Endpoints (Max) (OHCI, EHCI) 10 Endpoints (Fixation) (Renesas original) Isochronous Transfer Supported Block diagram Part Number M38K07M4L-XXXFP M38K07M4L-XXXHP M38K09F8LFP M38K09F8LHP Electronic PC peripheral music instrument equipment OA equipment Communication equipment Pin Package Package Code 64 64 64 64 LQFP LQFP LQFP LQFP PLQP0064GA-A PLQP0064KB-A PLQP0064GA-A PLQP0064KB-A Industrial instrument Memory capacity (Byte) ROM RAM 16K 1K 16K 1K 32K 2K 32K 2K Car accessory ROM Type* M M F F USB Function 1 port Bus Interface 8-bitx1 DMA Specification Pull-up I/O Port 10 Speed FS Serial I/O UART/Clock Sync. 8-bitx1ch Interrupt Factor 15 FIFO USB Buffer Max 64 (Built-in RAM is used) *1 A/D Converter 10-bitx8ch Minimum Instruction Execution Time 250ns Endpoint (Pipe) 4 Endpoints Timer 8-bitx3 (with Prescaler) PLL Frequency Multiplier Built-in (USB48MHz generated internally) Isochronous Transfer Supported Supply Voltage V 3.00 to 5.25 3.00 to 5.25 3.00 to 5.25 3.00 to 5.25 Operating Temperature (C) Clock (MHz) 20 to 85 20 to 85 20 to 85 20 to 85 12*2 12*2 12*2 12*2 * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. This is the oscillation frequency that can be connected to external. For the internal clock, use 6MHz at 3V, and 6MHz or 8MHz at 5V. Compound USB Hub of Hub + function Full-Speed USB2.0 Function and Hub 38000 Series Abundant peripheral functions are embedded to realize Hub + function application equipment with one chip. 38K2 Group Full-Speed USB2.0 8 bit USB Function and Hub The 38K2 Group consists of 8-bit single-chip MCUs with built-in USB Hub + USB functions in compliance with Full-Speed USB2.0. The built-in down stream portsx2, 6 endpoints (USB functions: 4, USB Hub: 2), external bus interfacex1, serial I/Ox1, 8-bit timerx3 and A/D converter (8-channel) enable a variety of USB Hub + USB functions. In addition, 38K2 Group MCUs are suitable for USB conversion devices since the internal RAM can be accessed directly from USB and external interface. USB2.0 Function USB IP USB-IP Block diagram USB Communication Function FS USB-IP is librarized Renesas USB ASSP and consists of Full-Speed and Hi-Speed types. It is possible to choose a number of Endpoints and FIFO capacity according to the system. USB Communication Function HS FIFO 4KByte (Max) (FS) 16KByte (Max) (HS) Endpoint (Pipe) 16 Endpoints (Max) (FS) 8 Endpoints (Max) (HS) Isochronous Transfer Supported USB2.0 (480 Mbps) supporting low-capacitance surge absorption Zener diode HZM6.2/6.8Z4MFA (MPAK-5, 4 elements), HZM6.2/6.8Z4MWA (MPAK-3, 2 elements), RKZ6.2Z4MFAKT/RK6.8Z4KT (VSON-5; 4 elements), HZD6.2/6.8Z4 (SFP, 1 element), HZL6.2/6.8Z4 (EFP, 1 element) Protecting an electric equipment and an electron device from ESD surge in a high-speed signal transmission path. Electrical characteristics*2 6.2Z46.2V 6.8Z46.8V Item Code Test condition Block diagram Power Source for USB Pull-up D+ Pull-up Power Source Bus Interface 8-bitx1 DMA Specification I/O Ports 44 (LED: 4) Zener voltage Vz Reverse leak current IR USB Function + USB Hub 1 port+ (2-downstream port Pull-up I/O Port 10 Speed FS Serial I/O UART/Clock Sync. 8-bitx1ch Interrupt Factor 16 FIFO USB Buffer Max 64 (Built-in RAM is used) *1 A/D Converter 10-bitx8ch Minimum Instruction Execution Time 250ns Endpoint (Pipe) 2 Endpoints (Hub), 2 Endpoints (Function) Timer 8-bitx3 (with Prescaler) PLL Frequency Multiplier Built-in (USB48MHz generated internally) Isochronous Transfer Supported ROM Type* Supply Voltage V Operating Temperature (C) Clock (MHz) M M F F 3.00 to 5.25 3.00 to 5.25 3.00 to 5.25 3.00 to 5.25 20 to 85 20 to 85 20 to 85 20 to 85 12*2 12*2 12*2 12*2 Junction capacitance Mobile device Digital AV equipment Electronic PC peripheral music instrument equipment OA equipment Communication equipment Part Number Pin Package Package Code M38K27M4L-XXXFP M38K27M4L-XXXHP M38K29F8LFP M38K29F8LHP 64 64 64 64 LQFP LQFP LQFP LQFP PLQP0064GA-A PLQP0064KB-A PLQP0064GA-A PLQP0064KB-A Industrial instrument Memory capacity (Byte) ROM RAM 16K 1K 16K 1K 32K 2K 32K 2K Car accessory C Min. Typ. Max. Min. Typ. Max. Iz=5mA 40ms Pulse 5.9 VR=3.5V VR=5.5V VR=0V f=1MHz 2.4 Unit 6.5 6.47 7.0 V 2.0 A 3.0 A 4.0 4.5 4.0 4.5 pF 4.0 4.0 pF elements 1 elements Dynamic resistance Supported application SH7216 Digital AV equipment I/O Ports 48 (LED: 4) SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 Mobile device Power Source for USB Pull-up D+ Pull-up Power Source H8SX/ 1665/ 1655 Supported application USB IP/ ZENER DIODE EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT USB Host-IP H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M Full-Speed USB2.0 8 The 38K0 Group consists of 8-bit single-chip MCUs with built-in USB functions in compliance with Full-Speed USB2.0. The built-in 4 endpoints, external bus interfacex1, serial I/Ox1, 8-bit timerx3 and A/D converter (8-channel) enable a variety of USB functions. In addition, 38K0 Group MCUs are suitable for USB conversion devices since the internal RAM can be accessed directly from USB and external interfaces. 38K0 38K2 38K0 Group USB IP USB IP/ ZENER DIODE built-in serial I/O or bus interface. USB2.0 Host ESD*3 Rd Iz=5mA 60 30 C=150pF R=330 8 8 kV 10 times forward and reverse impression *2 Value per one element *3 Based on IEC61000-4-2 / Judgment with reverse leak current EVALUATION EVALUATION DEVELOPMENT BOARD PRODUCTS ENVIRONMENT It is suitable for one-chip USB converter with SH7265/ SH7205/ SH7724/ M66592/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP application with a small package. 38K0 38K2 H8SX/ H8SX/1668R/ 1653/ 1668M H8S/2212 H8S/2456R 1663/ H8SX/1658R/ M30245 M16C/6C 2215/2218 2456/2454 H8S/2472 1658M H8SX/ 1665/ 1655 SH7727/ SH7720/ SH7763/ SH7285/ SH7705 SH7721 SH7760 SH7286 SH7216 SH7265/ SH7724/ M66592/ SH7205/ SH7670/ SH7263/ SH7262/ SH7722/ M66591/ R8A66597/ SELECTION R8A66580 SH7764 SH7203 SH7264 SH7723 M66291 M66596 MAP ROAD MAP Full-Speed USB2.0 Function 38000Series * F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version *1. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *2. This is the oscillation frequency that can be connected to external. For the internal clock, use 6MHz at 3V, and 6MHz or 8MHz at 5V. 29 30 Development Tools for SuperH Family MCU Software tool Group Series SH7764 Renesas Development Environment Web http://www.renesas.com/tools C and C++ compilers Real-time OS SH7780 Integrated development environment and CASE tools Development environment for getting the most from Renesas microcontrollers Powerful alliances with a wide variety of partner vendors Renesas backs up customer system development efforts with full support services SH7763 SH7724(SH-MobileR2R) SH7723 Middleware and drivers SH7722 SH7750 Emulators SH7721 SH7700 Platform SH7720 HI7750/4 (R0R40775TXW02w)*1 or HI7300/PX (R0R50730PXW01w)*1*2 HI7700/4(R0R40770TXW02w)*1 or HI7300/PX (R0R50730PXW01w)*1*2 HI7750/4(R0R40775TXW02w)*1 SH-Ether http://www.renesas.com/hew SH7216 HI7000/4 (R0R40700TXW02w)*1 SH7205 HI7200/MP(R0R50720MXW01w)*1 SH7200 Compiler An easy to use GUI that is the same for all Renesas microcontrollers Software tools and documentation can be upgraded easily over the internet Coordination with products (such as CASE tools) from partner companies - - - R0E572160VKK00*9 (evaluation chip unit) + R0E0200F1CKL11 R0E0200F0EPU00 Flash Development Toolkit (user system interface common cable) (extended profile unit) (R0C00000FDW04R R0E0200F1EMU00 + R0E572167CFK10*10 HS0005KCU01H/02H R0E0200F1ETU00*12 E200F *7*8 (user system interface conversion board for PLQP0176KB-A (E10A-USB) (external bus trace unit) HS0008EASF5H Note: The emulator software Note: The emulator software [Previous code: FP-176EV]) or R0E572167CFL10*10 R0E0200F1MSR008MByte*12 (RS232C) *13 *14 is under development is under development (user system interface conversion board for PLQP0176LB-A (emulation memory unit) or [Previous code: FP-176AV]) or R0E572167CBG10*10 or R0E0200F1MSR0116MByte*12 E8a(USB) *15 *16 (emulation memory unit) (user system interface conversion board for PLBG0176GA-A [Previous code: BP-176]) C/C++ Compiler Package for SuperH Family MISRA C supported*4 HS0005KCU04HE10A-USB SH7265 R0E0200F0EPU00 (extended profile unit) R0E0200F1ETU00 (external bus trace unit) R0E0200F1MSR00 (8MByte)*9 (emulation memory unit) or R0E0200F1MSR01(16MByte)*9 (emulation memory unit) R0E0200F1EMU00 E200F *7*8 HS0005KCU01H/02H E10A-USB - HI7200/MP(R0R50720MXW01w)*1 HS0005KCU04HE10A-USB - - R0E0200F1ETU00 *12 R0E572800VKK00 *9 (evaluation chip unit) Flash Development Toolkit external bus trace unit + R0E572850CFK00*10 (R0C00000FDW04R R0E0200F0EPU00 (user interface board for PLQP0144KA-A extended profile unit [Previous code: FP-144LV]) or R0E572860CFK00*10 HS0008EASF5H R0E0200F1MSR008MByte*12 (user interface board for PLQP0176KB-A (RS232C)*13*14 emulation memory unit [Previous code: FP-176EV]) or R0E572860CFL00*10 or or R0E0200F1MSR0116MByte*12 (user interface board for PLQP0176LB-A E8a(USB)*15*16 emulation memory unit [Previous code: FP-176AV]) SH7285 User system HI7000/4 (R0R40700TXW02w)*1 SH7280 HS0005KCU01H/02H E10A-USB - R0E0200F0EPU00 (extended profile unit) R0E0200F1ETU00*9 (external bus trace unit) R0E0200F1MSR00 (8MByte)*9 (emulation memory unit) or R0E0200F1MSR01(16MByte)*9 (emulation memory unit) User system Full-spec emulator - - R0E0200F1EMU00 E200F *7*8 SH7263 SH7260 - - SH7203 On-chip debugging emulator Screen Image of the High-performance Embedded Workshop R0E0200F0ETU00*11 (External bus trace unit) R0E0200F0EPU00 (Extended profile unit) - HI7000/4 SH7262, SH7264 (R0R40700TXW02w)*1 Real-time OS Build R0E0200F2EMU00 E200F *7 SH7670 SH7216 Simulator Debug - HI7700/4 (R0R40770TXW02w)*1 Compiler package Coding Options - HS0005KCU01H/02H E10A-USB Note: The emulator software for SH7724 group is under development Seamless system development provided by Renesas' High-performance Embedded Workshop The Renesas development environment links the tools necessary for application development, including compilers and debuggers (emulator software), and supports the development process, from coding through verification, in a single application. Since this environment provides consistency across the various tools used provided at each stage in the development process, development proceeds smoothly as though these multiple functions were provided by a single tool. Programming tool (flash programming software,adapter board) High-performance model User system interface board or evaluation chip unit SH7705 Programmers Renesas Integrated Development Environment SH7760 SH7727 Hardware tool Economy model C/C++ Compiler Package *3 (integrated development On-chip debugging emulator Full-spec emulator environment bundled) (emulator software bundled)*5 *6 (emulator software bundled) RTOS (ITRON) R0E0200F1EMU00 E200F *7*8 SH7286 Development Tools for M16C Family Emulator Lineup http://www.renesas.com/emulationdebugging Wide range of lineup of emulators that can be selected for your purpose Easily operatable from High-performance Embedded Workshop MCU Software tool Series Group M16C/60 M16C/20 M16C/6C M16C/24(M30245) Hardware tool RTOS (ITRON) C Compiler Package *3 (integrated development environment bundled) On-chip debugging emulator (emulator software bundled) M3T-MR30/4 (R0R30600TRW02wE)*1 C compiler package for R8C, M16C Family (R32C/M32C/M16C)*21 (MISRA C supported *4) E8aR0E00008AKCE00*17 - Full-spec emulator (emulator software bundled) Programming tool*20 (flash programming software, adapter board) - Flash Development Toolkit *19 (E8a emulator is required for programming) *20 PC4701U*18 + M30245T3-RPD-E On-chip Debugging Emulators Development Tools for H8SX and H8S Families E10A-USB E8a SH MCU Series Software tool Group RTOS (ITRON) H8SX Hardware tool Economy model C/C++ Compiler Package *3 (integrated development On-chip debugging emulator environment bundled) (emulator software bundled)*5 *6 H8SX/1653 H8S M16C The emulator with an excellent cost-performance ratio The emulator is capable of evaluating a users system in electric properties as close as a final product. The emulator is USB bus powered and thus external power supply is not needed. PC Interface: USB H8SX/1668R The emulator that can be used to program the flash memory This product package includes a set of development tools, such as an integrated development environment, an emulator debugger, a compiler package free evaluation version, and flash development tool kit free evaluation version. The emulator is capable of evaluating a users system in electric properties as close as a final product. The emulator is USB bus powered and thus external power supply is not needed. PC Interface: USB Web http://www.renesas.com/e10ausb H8SX/1658R H8SX/1600 H8S/2472 , H8S/2462 HI1000/4 (R0R41600TXW01w)*1 Compact Emulator E6000H E6000 H8S/2400 M38000T2-CPE H8S/2456 H8S/2454 C/C++ Compiler Package for H8SX, H8S, H8 Family (debug MCU board for PLQP0144KA-A (MISRA C supported *4) [Previous code: FP-144LV]) or R0E424548PFK00 *22 (debug MCU board for PLQP0120LA-A [Previous code: FP-120BV]) or R0E424548PFK01 *22 (debug MCU board for PLQP0120KA-A) H8S/2218 H8S/2200 SH H8SX H8S HS0005KCU01H/02H E10A-USB H8S/2212 740 HS0005KCU01H/02H E10A-USB Only the H8S/2215R, H8S/2215T corresponds H8S/2215 The E200F emulator is a high performance emulator with onchip debugging emulation and bus trace functions. Real-time emulation with a maximum operating frequency of MCU is available PC interface: USB Highly-functional emulator that provides efficient debugging environment Enhanced emulation functions such as C language source level debugging, trace and break PC Interface: USB Compact in-circuit emulator has many functions and is affordably priced. This product package includes a set of development tools, such as an integrated development environment, an emulator debugger, and a compiler/assembler free evaluation version. The compact emulator that supports full-scale development with advanced functions such as real-time trace PC interface: USB Web http://www.renesas.com/e6000h Web http://www.renesas.com/cpe http://www.renesas.com/e6000 Flash Development Toolkit http://www.renesas.com/fdt Microcontroller flash memory can be programmed by connecting the E8a and using the Flash Development Toolkit. In addition, when a USB boot microcomputer is used, it is possible to connect a PC to a microcomputer directly with USB. For information on the target MCUs, refer to the lists on the next page. Options Flash writing software Adapter board Flash Development Toolkit*19 HS0008EASF5H RS-232C*13*14 or E8aUSB*15*16 HS1653ECN61H (for PTQP0120LA-A [Previous code: TFP-120]) HS1664ECH61H (for PLQP0144KA-A [Previous code: FP-144L]) HS1668RECH61H (for PLQP0144KA-A [Previous code: FP-144L]) HS1658RECN61H (for PLQP0120LA-A [Previous code: FP-120B]) - Flash Development Toolkit*19 HS0008EASF5H RS-232C*13*14 or E8aUSB*15 HS0008EASF5H RS-232C*13*14 or E8aUSB*15*16 - HS0008EASF5H RS-232C*13*14 or E8aUSB*15 - Flash Development Toolkit*19 HS2214EPI62H E6000 + HS6000EIU02H USB-Adapter HS2218ECN61H HS6000 (for PTQP0100LC-A [Previous code: TFP-100G]) EMS12HExtended or HS2218ECB62H 4MB memory board (for PLBG0112GA-A [Previous code: BP-112]) HS2212ECH61H (for PLQP0064KC-A [Previous code: FP-64E]) - HS2215RECN61H HS6000 (for PTQP0120LA-A [Previous code: TFP-120]) Note: The package deal type EMS12HExtended or HS2215RECB62H name above is HS2214EP162H-U (for PLBG0112GA-A [Previous code: BP-112]) 4MB memory board HS0008EASF5H RS-232C*13*14 or E8aUSB*15*16 Development Tools for 740 Family MCU Series Software tool Group 38000 Web http://www.renesas.com/e200f User cable or user system interface board Note: For evaluating functions except ADC (1s conversion mode) and 10-bit DA output, E6000H for the H8SX/1668R group can be used. Note: For evaluating functions except ADC (1s conversion mode) and 10-bit DA output, E6000H for the H8SX/1658R group can be used. H8SX/1655 Full-spec Emulators E200F Note: The package deal type name above is HS1650EPH160H-U HS0005KCU01H/02H E10A-USB H8SX/1665 Web http://www.renesas.com/e8a Full-spec emulator (emulator software bundled) HS1650EPH60H*23 E6000H + HS6000EIU02H USB-Adapter H8SX/1663 Programming tool High-performance model 38K0 38K2 Assembler Package *3 (integrated development environment bundled) M3T-SRA74 Hardware tool Programming tool Compact emulator (emulator software bundled) Emulator MCU Package type of target M38000T2-CPE*17 M38K09RFS M38K29RFS PLQP0064KB-A [Previous code: 64P6Q-A] (64-pin 0.5mm-pitch LQFP) or PLQP0064GA-A [Previous code: 64P6U-A] (64-pin 0.8mm-pitch QFP) *20 *1. w="1": evaluation license for one host machine w="5": evaluation license for up to five host machines w="A": evaluation license for up to ten host machines w="K": mass production license for up to 1,000 user systems w="U": mass production license, no limit on the number of user systems w="Z": mass production license, no limit on the number of user system, with kernel source code*2. HI7300/PX supports SH-4A and SH4AL-DSP microcomputers.*3. The compiler package includes integrated development environment (High-performance Embedded Workshop), compiler, assembler, simulator debugger and other items. The assembler package includes integrated development environment (High-performance Embedded Workshop, TM), assembler, simulator debugger and other items.*4. MISRA C rule inspection function is added by installing the separately available MISRA C rule checker SQMlint (type name: R0C00000SCW01R).*5. HS0005KCU01H only uses H-UDI function of device. HS0005KCU02H uses H-UDI function and AUD function of device. However, in case of the device of H8S family, HS0005KCU02H can implement only the debug using H-UDI function. Only the flash memory version is supported and the ROM-less mode cannot be used.*6. The user interface cable HS0005ECK01H (option) is prepared for the connection to Mictor38pin connector for HS0005KCU02H.*7. A host interface (USB cable) is bundled.*8. You can use it with system configuration of on-chip configuration.*9. A trace cable (R0E0200F0ACC00) is necessary. When you attach more than one optional product, only one trace cable is used.*10. An evaluation chip unit is necessary.*11. A trace cable (R0E0200F0ACC00) is bundled.*12. An evaluation chip unit, a trace cable and a user interface board are necessary.*13. The programming software is not bundled. Please purchase one separately.*14. HS0008EASF4H can be also used.*15. With E8a (type name: R0E00008AKCE00), an evaluation version (for free, without support) of Flash Development Toolkit (type name: R0C00000FDW04R) is bundled as programming software. For development and mass production, please purchase the product version (for value, with support) separately.*16. HS0008EAUF1H can be also used as a USB adapter board.*17. Software for emulator (integrated development environment High-performance Embedded Workshop, emulator debugger, evaluation version of compiler, evaluation version of Flash Development Toolkit) is included (evaluation version is free, without support). However, the evaluation version of Flash Development Toolkit is not included with M38000T2-CPE. For the bundled software, a old product or old version may be bundled depending on the shipment time. The latest version can be downloaded from internet (for free). http://www.renesas.com/download*18. The latest version of M16C PC4701 emulator debugger can be downloaded from internet (for free). http://www.renesas.com/download*19. For Flash Development Toolkit (type name: R0C00000FDW04R), the product version (for value, with support) and the evaluation version (for free, without support) are available.*20. Programmers made by various partner vendors are prepared.*21. C compiler package for R32C series, C compiler package (M3T-NC308WA) for M32C series and C compiler package (M3T-NC30WA) for M16C series and R8C family are bundled*22. The E10A-USB emulator can be used for the system development using the terminal for user debug interface (H-UDI) and the dual-purpose terminal by using the debug MCU board.*23. When it is not connected to the user system, the user interface board is necessary. New product Under development 3rd Party Programmer Manufacturers Data I/O Corporation http://www.dataio.com SMH Technologies http://www.softecmicro.com/ E-mail pietro.poletto@smh-tech.com Sunny Giken Inc. Sophia Systems Co., Ltd. http://www.sophia-systems.com/ E-mail intsales@sophia-systems.co.jp Wave Technology Co., Ltd. http://www.wavetechnology.co.jp/en/contact.html E-mail esales@y1000.com Yokogawa Digital Computer Corporation http://www.yokogawa-digital.com/en/NETIMPRESS.html E-mail info-impress@yokogawa-digital.com USB PC Flash Development Toolkit Flash Support Group, Inc. E8aR0E00008AKCE00 http://www.j-fsg.co.jp/e/formask01.html USB device USB Minato Electronics Inc. http://www.minato.co.jp/en/index.html E-mail int-support@minato.co.jp SUISEI ELECTRONICS SYSTEM CO., LTD. http://www.suisei.co.jp/indexe.html E-mail support@suisei.co.jp supportapl@renesas.com (Renesas Solutions Corp.) E-mail http://www.sunnygiken.co.jp/english/ USB Development / Evaluation Products Layer configuration of USB driver Outline of function Application User application inherent in system Software library required for realizing functions of the system such as video, image, audio and file system Middleware USB driver USB device class driver conforming to various USB device classes USB device class firmware USB hardware control driver (Enumeration, device status management and data communications are realized) USB basic firmware Hardware USB device USB Driver Correspondence Table Function Type name USB basic firmware SH7722 *1 SH7723 *1 Host USB device class firmware HID Mass Storage Comm. Printer USB basic firmware USB device class firmware Mass Storage *1 SH7203/SH7263 *1 SH7205/SH7265 *1 SH7262/SH7264 *1 *1 SH7670 SH7285/SH7286 *2 SH7216 *2 SH7705 *2 SH7727 *2 SH7720 *2 SH7760 SH7763 *2 H8SX/1653 *2 H8S/2456 *2 H8S/2472 *2 H8S/2212,H8S/2218 *2 H8S/2215 *2 M16C/6C *2 M30245 38K0,38K2 M66291 M66591 M66596: OS-noncompliant version is also provided M66596/R8A66597 *1 R8A66580 USB,Wireless USB*1 *1 - - M66592 HID - - OS-noncompliant *1M66596: version is also provided *1 *1R8A66597 only USB*1 : Sample (free of charge) : On sale : Under development : Under consideration : N/A (Note) 1. Only OS-compliance version is provided. For the item without a mark (without 1), only OS-noncompliant version is provided. *2. USB Basic Firmware is included in each USB Device Class Firmware. * * Demo Board/Evaluation Board Hi-Speed MCU Demo Board / Evaluation Board Full-Speed/Hi-Speed USB ASSP P0K572630D001BRSH7263 Evaluation Board SH7722 Solution Engine M3A-0032<M66291GP Utility Board> M3A-0037G01<M66591GP Utility Board> Equipped with hardware required to evaluate the SH7263 USB, LCDC, SSI and other functions of the SH7263. Standard embedding of USB interface, LCD module interface, audio interface, and other advantages and is suitable for advanced development of USB application products such as digital audio devices. In addition, all I/O ports of SH7263 are connected to the expansion connectors, enabling simple evaluation of peripheral functions and H/W expansion. Evaluation board embedded with the H/W for evaluating the H.264/MPEG4 dynamic picture image, camera, USB, LCDC, SD Card, and other functions of SH7722. An environment where a main OS, such as a ITRON or WindowsCE, can function and the on-chip debugger can connect as ready. It is also possible to use this as an easy program evaluation board in combination with a simple monitoring program. This board is a product of Hitachi ULSI Systems Co., Ltd. A utility board embedded with the H/W required for M66291GP and USB communication. Two PCB connectors (13-pin x 2-line) are prepared for microprocessor connection. This connector is compatible with other Renesas USB ASSP utility boards, and is easily connectable to systems using Renesas USB ASSP. This comes equipped with a 12-MHz quartz-crystal oscillator, USB connector, test pin, and jumper SW for bus mode selection (expansion function of the M66291GP). A Utility board equipped with the H/W required for M66591GP and USB communication, and including controlled D+/D- line impedance matching. Features two built-in PCB connectors (25pin x 2-line) for MCU board and split bus connections. These connectors are compatible with other Renesas USB ASSP utility boards, and easily connectable to systems using Renesas USB ASSP. This comes equipped with a 24-MHz quartz-crystal oscillator, USB connector, test pin, and jumper SW for interface power supply change. M3A-0038G01<M66592FP Utility Board> M3A-0039<M66596FP Utility Board> A utility board embedded with the H/W required for M66592FP and USB communication, and including controlled D+/D- line impedance matching. Features two built-in PCB connectors (25pin x 2-line) for MCU board and split bus connections. These connectors are compatible with other Renesas USB ASSP utility boards, and easily connectable to systems using Renesas USB ASSP. This comes equipped with a 24-MHz quartz-crystal oscillator, USB connector, test pin, and jumper SW for interface power supply change. A utility board embedded with the H/W required for M66596FP and USB communication, and including controlled D+/D- line impedance matching. Features two built-in PCB connectors (25-pin x 2-line) for MCU board and split bus connections. These connectors are compatible with other Renesas USB ASSP utility boards, and are easily connectable to systems using Renesas USB ASSP. This comes equipped with a 24-MHz quartz-crystal oscillator, USB connector, test pin, and jumper SW for interface power supply change. Demo Board/Evaluation Board Full-Speed MCU SH7721 Solution Engine Light SH7727 Solution Engine Light HSB8SX1653F, HSB8SX1654F <H8SX/1653 Group Evaluation Board> HSB8SX1663F, HSB8SX1664F <H8SX/1663 Group Evaluation Board> Evaluation board embedded with the H/W for evaluating built-in USB, LCDC, SIOF and other functions of SH7720 and SH7727. The environment where main OS such as ITRON and the on-chip debugger connection run is ready. Connection with various USB ASSP utility boards (*1) is possible through relay board M3A-ZA53. It is also possible to use it as an easy program evaluation board in combination with a simple monitor program. This board is a product of Hitachi ULSI Systems Co., Ltd. *1: Option : M3A-0032M3A-0037G01M3A-0038G01M3A-0039M3A-0040 Evaluation board for CPUs equipped with the H8SX/1653 or 1663 Groups. Application as a program evaluation board by connecting a full emulator or an on-chip emulator. This board is a product of Hokuto Denshi Co., Ltd. HSB8S2215RST <H8S/2215 Group Evaluation Board> HSB8S2215ST <H8S/2215 Group Evaluation Board> HSB8S2218ST <H8S/2218 Group Evaluation Board> HSB8S2212ST <H8S/2212 Group Evaluation Board> These boards contain the H8S/2215, H8S/2218 and H8S/2212 group, and it is possible to use them as an easy program evaluation board in combination with a monitor program. Emulator connection is possible and the flash chip is loadable. In addition, the USB starter's kit is also available as an evaluation kit. M3A-0040<R8A66597FP Utility Board> M3A-0245 <M16C/24 Group M30245 Evaluation Board> Equipped with hardware required to evaluate USB and other peripherals functions of M30245. Loading of emulator connection or a flash-chip is possible. The board M3A-7754*1 for pitch conversion board can be connected and program rewriting of a flash-chip is easy. Moreover, since the connector which can be used to expand the universal board etc. is supported, the functional evaluation according to the use is possible. It can be used as an easy program evaluation board in combination with a simple monitor program. *1: Option A utility board embedded with the H/W required for R8A66597FP and USB communication and including controlled D+/D- line impedance matching. Features two built-in PCB connectors (25-pin x 2-line) for MCU board and split bus connections. These connectors are compatible with other Renesas USB ASSP utility boards, and are easily connectable to systems using Renesas USB ASSP. This comes equipped with a 24-MHz quartz-crystal oscillator, USB connector, test pin, and jumper SW for interface power supply change. Demo Board / Evaluation Board USB ASSP Evaluation Tool M3A-ZA53<for SuperH Solution Engine> Converter Board for USB ASSP Utility Board M3A-8K02 <38K0 Group/38K2 Group Evaluation, Development Board> M3A-0033<Renesas USB ASSP Evaluation Motherboard> Evaluation/development board for the 38K0 Group and 38K2 Group. Embedded with circuits needed for USB function and USB hub, application of the external circuit use universal board (G04) facilitates simple development and evaluation of USB systems. Replacing the two-board set upper surface boards (G02, G03) makes it possible to conduct inspections with both flash-chips and debuggers. Since it is possible to exchange Vcc = 5V/ 3.3 V, and USB rewriting/serial rewriting of flash memory with an easy switch, changes in peripheral setup can be performed in a short time. CPU board with a simple debugger embedded with M16C/80. By combining it with various USB ASSP utility boards (*1), all Renesas USB ASSP can easily be evaluated. It comes equipped with M16C/80, 10 MHz, a RS-232C driver, and interface connector for PC. Relay board for evaluating Renesas USB ASSP from the SuperH Solution EngineTM using various USB ASSP utility boards (*1). It can be used in combination with the processor system Solution EngineTM (*2) and various USB ASSP utility boards. *1. Option:M3A-0037G01M3A-0038G01M3A-0039M3A-0040 Bundle:M3A-0032 *1. Option: M3A-0032, M3A-0037G01, M3A-0038G01, M3A-0039, M3A-0040 *2. Option: SH7727, SH7721 (An instance) REJ01B0005-0700