N series Overview Main materials used PF co-AXIAL CONNECTORS The N series of connectors are medium-sized, weather-resistant constant-impedance coaxial connectors of the screw-coupling type, suited for use with medium-sized coaxial cables. Their rated voltage is 500V (rms). The nominal impedance is 5022, and they can be used with frequencies of up to 10GHz. At low frequencies, they can be used with 75Q cables. They are suited primarily for coaxial cables RG-5, 6, 8, 9/U, etc. The N series has been approved in Defense Agency specification DSP C 6201. Main performance characteristics Parts Materials __ Finish Items S Standard value nad - Armor (shell) Brass Silver plating + at Contact resistance 3m2 or less {at 1A DC) Outer contacts Phosphor bronze SOE ene nt Insulation resistance {000MQ or more at 500V DC Male ends Brass Siiver P (ating + at Withstand voltage 1500V AC (rms) for 1 minute Female ends Beryllium copper Se eae Tat Characteristic impedance 502 Insulation Tetrafluoride resin | Packing Silicone rubber N-P plugs HRS No. Part No. | Applicable | gp) gd] L Remarks UG-21D/U N-P-141 CL301-0002-7 | UG-18C/U | RG-5.6.21/U | 8.7] 19.0] 38 *CL301-0003-0 | UG-21D/U | RG-8.9/U 11.1) 19.0] 38 CL301-0022-4 | UG-204C/U|} RG-14/U 14.1) 22.2] 45 *CL301-0001-4 | JUG-536/U| RG-58/U B54] 19.0] 38 | pierre Ue oy CL301-0078-9 | N-P-3DV | 3D-2V 6.3] 12.7| 35 *CL301-0120-3 | N-P-5DV_ | 5D-2V 8.6 | 18.0| 45.5 CL301-0116-6 | N-P-8DV | 8D-2V 12.6| 23.0] 51 CL301-0199-3 | N-P-5DW | 5D-2W 9.3/18 | 46 CL301-0205-4 | N-P-5DFB | 5D-FB 8.6/18 | 46 CL301-0206-7 | N-P-10DFB | 10D-FB 14.65/23 | 55 *Standard product TY HRS No. Part No. | Applicable | p | dd | L cable *CL301-0162-3 | N-P-141 UT-141A 3.63] 13 |27.3 *Standard product SY)ne RF co.axia connectors L-Shaped Plug aT | ad wD - wy oS t infoo = il il \ 1 ! L] | Loa N-LP-5DW $ [- +} HRS No. Part No. | pplicable | gp | gg | L Remarks CL301-0007-0 | N-LP-5DW | 5D-2Ww 9.3 |17.5|52.4} Nickel-plated except CL301-0076-3 | N-LP-58U | RG-58/U | 5.3 |15.5/44.0 NE HRS No. Part No. Applicable cable 6A CL301-0179-6 N-J-3DW | 3D-XW Irrax 4.3 CL301-0180-5 N-J-3DV 3D-2V 5.1 N-J-3DW -24UNEF-2A HRS No. Part No. | Applicable | gp} gd | L cable CL301-0008-3 | UG-23D/U | RG-8,9/U |11.1]19.0/39.7 56-24UNEF-2A UG-23D/U XNAY] SERIES RF co.axIAL CONNECTORS Panel-Jack HRS No. Part No. | Applicable | gp] d] L | OS > CL301-0010-5 | UG-22D/U | RG-8,9/U | 11.1] 19.0]39.7 | 18.24 *CL301-0011-8 | N-PJ-58/U| RG-58/U | 5.4/14.6]41.5]18.2 *Standard product / So . &) < |. | Ga\ | al g UG-22D/U Pp & Bd 493.2 Receptacle HRS No. Part No. 1) *CL301-0012-0] UG-58A/U *Standard product thy Y o < =/% ch 8] 2 - - 3 oa 2 } N eo) * UG-58A/U , ; 4-63.2 SS Adapter < < < iJ By ful 2 {| = By s HRS No. Part No. 2 z|* a a CL301-0035-6 | UG-29B/U ak ae 44.5 UG-29B/U . = PP Tm - HRS N Part N fe my co Oo. a QO. Zz 7 rS|8] | CL301-0018-7 | UG-57B/U = A * x Fae UG-57B/U 40.6 11Mac FF Foo-AXIAL CONNECTORS HRS No. Part No. CL301-0036-9 N-PA 12 : (1 TE 1 fa fe 129 nN] ow 3 - . Z| < 3/3 3 I 2| 3 ao} o mw F te 16.7 [2 N-PA 45 443.2 35.5 Ts HRS No. Part No. 1 fs CL301-0015-9 | UG-27C/U Dp 4 a oo 2 wy UG-27C/U 5-24UNEF-2B $20.8 JJ HRS No. Part No. JPJ HRS No. Part No. CL301-0017-4 | UG-28A/U CL301-0016-1 | UG-107B/U UG-28A/U 31 56-24UNEF-2A 5%-24UNEF-2A -24UNEF-2A %-24UNEF-2A 44.4N SERIES R F. CO-AXIAL CONNECTORS Cap CL301-0020-9 | MX-913/U HRS No. Part No. 14 Ls NEF~2B zg 24| MX-913/U Pe 19.1-s Functional drawing Typical product numbers are enclosed in parentheses. C( MX913/U) P(UG21D/U) PA AJJ(UG ( NPA ) 29B/U) ___t ! R(UG58A/U) LJ PJ(UG 22D/U) J(UG23D/uU) 1 13MW ESscacae PRP co-AXiAL CONNECTORS Connecting methods Tightener Gasket 0 Lio-s Outer Center conductor Outer covering conductor The cable ends are processed as shown in the drawing (refer to Table 1). For the end processing dimensions L,, refer to Table 1, End processing dimensions arranged by part number. a 249.1 Surface A (1) Insert clamp from tip of cable and fold outer conductor of cable back onto clamp. Using a knife, cut off excess outer conductor feft at this time. ; Cut off center conductor of cable at L,, from surface A {. of cable insulation. For end processing dimensions Ly, \ | L,, refer to Table 1, End processing dimensions arranged . by part number. (L, is a reference dimension.) (Note: Be careful not to damage center conductor.) Solder contact and center conductor. It is a good idea at this time to solder the contact preliminarily in advance. (Note: There must be no gap between the contact and the cable insulation.) (2) (3) Insert cable and parts into shell and fit sharp end of clamp compietely into V-shaped surface of gasket. Tighten tightening nut sufficiently. m= Remarks 1. The cable end processing dimensions are those of general connectors based on the MIL and DSP standards, They may differ somewhat depending on the type of cable. In such cases, match the dimensions with the connectors. 2. Some clamps and gaskets are not V-shaped, but the con- necting procedures are the same, som C Table 1 and processing dimensions arranged by part number Unit: mm HRS No.. Part No. L196 }LetO1 La. -*GL301-0001-4 | JUG-536/U 8.6 6 1 CL301-0002-7 |-.UG-18C/U 9.6 Bowe *CL301-0003-0.| _UG-21D/U 10.0 6 18 CL301-0007-0 |) N-LP-5DW 115.) 4 3.5 CL301-0008-3 | UG-23D/uU 8.5 } 5. 4 CL301-0010-5 | _UG-22D/U BB.) 5 1 *CL301-0011-8 | N-PJ-58/U TAO 3 3.2 CL301-0022-4 |. UG-204C/U |/-11.5 6 2 CL301-0076-3.| N-LP-58U 9.2. [5 4 3.6. CL301-0078-9 | N-P-3DV 12.3 | 66 AS CL301-0116-6'| N-P-8DV 12:3 |. 55} 3 , *CL301-0120-3 | N-P-5DV 14.4 6 15 ( CL301-0199-3 | N-P-5DW 12.0 6 15 CL301-0205-4 | N-P-5DFB 11.0 6 5 CL301-0206-7 | N-P-10DFB- | . 11.0 6 5 *Standard product