Series SC10BDP Series 10 Watts Single/Dual Outputs Industry standard form factor 2 x 1 x 0.40 Wide input voltage range 9-36 Vdc 18-75 Vdc Remote shutdown 400kHz switching frequency Continuous short circuit protection Six-sided shielding UL1950, cUL, EN60950 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 INPUT 123456789012345678901234567890121234567 123456789012345678901234567890121234567 he SC10B series of cost Voltage Range 9-36 Vdc 123456789012345678901234567890121234567 123456789012345678901234567890121234567 sensitive single and dual output 18-75 Vdc 123456789012345678901234567890121234567 10 watt DC/DC converters are 123456789012345678901234567890121234567 Reverse Polarity Protected To Nominal Input Current 123456789012345678901234567890121234567 specifically designed for critical appliExternal Fuse Required 123456789012345678901234567890121234567 123456789012345678901234567890121234567 cations requiring a compact, low profile Remote On/Off Control Optional 123456789012345678901234567890121234567 case. 123456789012345678901234567890121234567 123456789012345678901234567890121234567 123456789012345678901234567890121234567 These high performance 10 watt 123456789012345678901234567890121234567 OUTPUT 123456789012345678901234567890121234567 converters offer a high switching 123456789012345678901234567890121234567 Voltage Tolerance 1% frequency topology, 1500 Vdc I/O 123456789012345678901234567890121234567 Ripple and Noise 50mV pk-pk (typ) 123456789012345678901234567890121234567 isolation, and efficiencies to 85%. 123456789012345678901234567890121234567 Short Circuit Protection Continuous Power Cycle 123456789012345678901234567890121234567 Temperature Coefficient 0.02% / C 123456789012345678901234567890121234567 123456789012345678901234567890121234567 Fourteen models available. Two input 123456789012345678901234567890121234567 voltage ranges of 9-36 Vdc and 18-75 123456789012345678901234567890121234567 GENERAL Vdc provide regulated outputs of 3.3, 5, 123456789012345678901234567890121234567 123456789012345678901234567890121234567 Regulation: 123456789012345678901234567890121234567 12, 15 and 5, 12 and 15 Vdc. 123456789012345678901234567890121234567 Line 0.25% 123456789012345678901234567890121234567 Load 0.5% (singles) 123456789012345678901234567890121234567 Applications 123456789012345678901234567890121234567 1.0% (duals) These units are ideally suited for 123456789012345678901234567890121234567 Switching Frequency 400 kHz (10%) 123456789012345678901234567890121234567 telecommunications, distributed power 123456789012345678901234567890121234567 Efficiency 80-85% (typ) systems, automatic test equipment, 123456789012345678901234567890121234567 123456789012345678901234567890121234567 I/O Isolation 1500 Vdc 123456789012345678901234567890121234567 medical and process control. 123456789012345678901234567890121234567 123456789012345678901234567890121234567 ENVIRONMENTAL 123456789012345678901234567890121234567 123456789012345678901234567890121234567 Operating Temperature -40C to +60C 123456789012345678901234567890121234567 123456789012345678901234567890121234567 Max Baseplate Temp 105C 123456789012345678901234567890121234567 Storage Temperature -55C to +105C 123456789012345678901234567890121234567 123456789012345678901234567890121234567 Cooling Free-air Convection 123456789012345678901234567890121234567 123456789012345678901234567890121234567 All specifications are typical at nominal line and full load at 25C unless 123456789012345678901234567890121234567 123456789012345678901234567890121234567 otherwise noted and are subject to change without notice. 123456789012345678901234567890121234567 T 9 SC10B Series Ordering Information Input Voltage Range Output Voltage Output Current Model Number 9-36 Vdc 9-36 Vdc 9-36 Vdc 9-36 Vdc 9-36 Vdc 9-36 Vdc 9-36 Vdc 18-75 Vdc 18-75 Vdc 18-75 Vdc 18-75 Vdc 18-75 Vdc 18-75 Vdc 18-75 Vdc 3.3 Vdc 5 Vdc 12 Vdc 15 Vdc 5 Vdc 12 Vdc 15 Vdc 3.3 Vdc 5 Vdc 12 Vdc 15 Vdc 5 Vdc 12 Vdc 15Vdc 2400mA 2000mA 830mA 600mA 750mA 375mA 300mA 2400mA 2000mA 830mA 600mA 750mA 375mA 300mA SC10B17-240-18 SC10B11-200-18 SC10B12-083-18 SC10B13-060-18 SC10B21-150-18 SC10B22-083-18 SC10B23-060-18 SC10B17-240-46 SC10B11-200-46 SC10B12-083-46 SC10B13-060-46 SC10B21-150-46 SC10B22-083-46 SC10B23-060-46 Dimensions and Connections NOTES: 1. Ripple measured with a 3.3 F tantalum capacitor across each output. 2. Minimum load 10% of full load. Load regulation from full load to minimum load. 3. The SC10B series requires an external filter capacitor across the input valued at 2.2F @ 100Vdc such as ITW/Paktron part# 225K100RA4 or equiv. 4. Case connected to pin #1 on -46 models. Case connected to pin #2 on -12 and -24 models PIN CONNECTIONS Single Output 1. +Input 2. -Input 3. +Output 4. No Pin 5. Common 6. Remote On/Off PIN CONNECTIONS Dual Outputs 1. +Input 2. -Input 3. +Output 4. Common 5. -Output 6. Remote On/Off For Optional Remote On/Off add suffix "E" (i.e. SC10B11-200-46E) Remote ON/Off Control (pin 6) common referenced to - Input (pin 2). On greater than 2.5 Vdc or open circuit Off less than 0.8 Vdc 03/27/2002 10 14C Industrial Way Atkinson, NH 03811 (603) 893-2330 FAX (603) 893-6280