Agilent HLMP-EDxx/EGxx/ELxx
5 mm Precision Optical Performance
Best Value AlInGaP Lamps
Data Sheet
Description
These Precision Optical Perform-
ance AlInGaP and AlInGaP II LEDs
provide superior light output for
excellent readability in sunlight and
are extremely reliable.
These LED lamps are untinted,
nondiffused, T-1 3/4 packages
incorporating second generation
optics producing well defined
spatial radiation patterns at specific
viewing cone angles.
Features
• Well defined spatial radiation
pattern
• Viewing angles:
6°, 15°, 23°, 30°
• High luminous output
• Two red and amber intensity levels
AlInGaP (bright) and AlInGaP II
(brightest)
• Colors:
626/630 nm red
590/592 nm amber
• Superior resistance to moisture
• UV resistant epoxy
Benefits
• Viewing angles match traffic
management sign and
requirements
• Colors meet automotive and
pedestrian signal and
specifications
• Superior performance in outdoor
environments
• Suitable for autoinsertion onto PC
boards
Applications
• Traffic management:
Traffic signals
Work zone warning lights
Variable message signs
• Commercial outdoor advertising:
Signs
Marquees
• Automotive:
Exterior and Interior Lights
These lamps are made with an
advanced optical grade epoxy,
offering superior high
temperature and high moisture
resistance performance in outdoor
signal and sign applications. The
high maximum LED junction
temperature limit of +130°C
enables high temperature
operation in bright sunlight
conditions. The package epoxy
contains both uv-a and uv-b
inhibitors to reduce the effects of
long term exposure to direct
sunlight.
2
Device Selection Guide for AlInGaP
Color and Luminous Intensity
Typical Dominant Iv (mcd)[2][3]
Viewing Angle Wavelength at IF = 20 mA Leads with Package
Part Number 2θ1/2 (nm), Typ.[4] Min. Standoffs Drawing
HLMP-EG08-T0000 6°Red 626 2170 No A
HLMP-EG10-T0000 6°Red 626 2170 Yes B
HLMP-EG15-N0000 15°Red 626 590 No A
HLMP-EG17-N0000 15°Red 626 590 Yes B
HLMP-EG24-M0000 23°Red 626 450 No A
HLMP-EG26-M0000 23°Red 626 450 Yes B
HLMP-EG30-K0000 30°Red 626 270 No A
HLMP-EG32-K0000 30°Red 626 270 Yes B
HLMP-EL08-T0000 6°Amber 590 2170 No A
HLMP-EL10-T0000 6°Amber 590 2170 Yes B
HLMP-EL15-M0000 15°Amber 590 450 No A
HLMP-EL17-M0000 15°Amber 590 450 Yes B
HLMP-EL24-L0000 23°Amber 590 345 No A
HLMP-EL26-L0000 23°Amber 590 345 Yes B
HLMP-EL30-K0000 30°Amber 590 270 No A
HLMP-EL32-K0000 30°Amber 590 270 Yes B
3
Device Selection Guide for AlInGaP II
Color and Luminous Intensity
Typical Dominant Iv (mcd)[2][3]
Viewing Angle Wavelength at IF = 20 mA Leads with Package
Part Number 2θ1/2 (nm), Typ.[4] Min. Standoffs Drawing
HLMP-ED16-S0000 15°Red 630 1650 No A
HLMP-ED16-S0T00 15°Red 630 1650 No A
HLMP-ED18-S0000 15°Red 630 1650 Yes B
HLMP-ED18-S0T00 15°Red 630 1650 Yes B
HLMP-ED25-R0000 23°Red 630 1300 No A
HLMP-ED25-R0T00 23°Red 630 1300 No A
HLMP-ED27-R0000 23°Red 630 1300 Yes B
HLMP-ED27-R0T00 23°Red 630 1300 Yes B
HLMP-ED31-Q0000 30°Red 630 1000 No A
HLMP-ED31-Q0T00 30°Red 630 1000 No A
HLMP-ED33-Q0000 30°Red 630 1000 Yes B
HLMP-ED33-Q0T00 30°Red 630 1000 Yes B
HLMP-EL16-S0000 15°Amber 592 1650 No A
HLMP-EL16-S0R00 15°Amber 592 1650 No A
HLMP-EL18-S0000 15°Amber 592 1650 Yes B
HLMP-EL18-S0R00 15°Amber 592 1650 Yes B
HLMP-EL25-Q0000 23°Amber 592 1000 No A
HLMP-EL25-Q0R00 23°Amber 592 1000 No A
HLMP-EL27-Q0000 23°Amber 592 1000 Yes B
HLMP-EL27-Q0R00 23°Amber 592 1000 Yes B
HLMP-EL31-P0000 30°Amber 592 765 No A
HLMP-EL31-P0R00 30°Amber 592 765 No A
HLMP-EL33-P0000 30°Amber 592 765 Yes B
HLMP-EL33-P0R00 30°Amber 592 765 Yes B
HLMP-EL31-Q0R00 30°Amber 592 1000 No A
Notes:
1. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
2. The luminous intensity is measured on the mechanical axis of the lamp package.
3. The optical axis is closely aligned with the package mechanical axis.
4. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4
Part Numbering System
HLMP-X X X X - X X X X X
MECHANICAL OPTIONS
00 - Bulk Packaging
DD: Ammo Pack
COLOR BIN SELECTIONS
0: No color bin limitation
K: Color bins 2 and 4
4: Amber color bin 4 only
R: Amber color bins 1, 2, 4, 6 and 7 with VF max of 2.6 V
T: Red color with VF max of 2.6 V
MAX INTENSITY BIN
MIN INTENSITY BIN
VIEWING ANGLE and LEAD STANDOFFS
08: 6 degree without lead standoffs; AlInGaP
10: 6 degree with lead standoffs; AlInGaP
15: 15 degree without lead standoffs; AlInGaP
16: 15 degree without lead standoffs; AlInGaP II
17: 15 degree with lead standoffs; AlInGaP
18: 15 degree with lead standoffs; AlInGaP II
24: 23 degree without lead standoffs; AlInGaP
25: 23 degree without lead standoffs; AlInGaP II
26: 23 degree with lead standoffs; AlInGaP
27: 23 degree with lead standoffs; AlInGaP II
30: 30 degree without lead standoffs; AlInGaP
31: 30 degree without lead standoffs; AlInGaP II
32: 30 degree with lead standoffs; AlInGaP
33: 30 degree with lead standoffs; AlInGaP II
COLOR
D: 630 nm Red
G: 626 nm Red
L: 590/592 nm Amber
PACKAGE
E: 5 mm Round AlInGaP
5
Package Dimensions
AB
Notes:
1. All Dimensions are in millimeters (inches).
2. Leads are mild steel, solder dipped.
3. Tapers shown at top of leads (bottom of lamp package) indicate an epoxy meniscus that may extend about 1mm (0.040 in.) down the leads.
4. Recommended PC board hole diameters:
• Lamp package A without standoffs: Flush mounting at base of lamp package = 1.143/1.067 (0.044/0.042).
• Lamp package B with standoffs: Mounting at lead standoffs = 0.965/0.889(0.038/0.035).
5. For dome height above lead stand-off seating plane, d, lamp package B. See table.
Part Number d
HLMP-xx10 12.37 ± 0.25
(0.487 ± 0.010)
HLMP-xx17 12.43 ± 0.25
(0.489 ± 0.010)
HLMP-xx26 12.52 ± 0.25
(0.493 ± 0.010)
HLMP-xx32 11.96 ± 0.25
(0.471 ± 0.010)
HLMP-xx18 12.60 ± 0.25
(0.496 ± 0.010)
HLMP-xx27 11.59 ± 0.25
(0.446 ± 0.010)
HLMP-xx33 11.99 ± 0.25
(0.472 ± 0.010)
2.35 (0.093)
MAX.
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244) MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
8.71 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244) MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
8.71 ± 0.20
(0.343 ± 0.008)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
CATHODE
LEAD
d
1.50 ± 0.15
(0.059 ± 0.006)
5.80 ± 0.20
(0.228 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
CATHODE
FLAT
6
Absolute Maximum Ratings at TA = 25˚C
Parameter Value
DC Forward Current [1,2] 50 mA
Peak Pulsed Forward Current[2] 100 mA
Average Forward Current 30 mA
Reverse Voltage (IR = 100 µA) 5 V
Power Dissipation 120 mW
LED Junction Temperature 130°C
Operating Temperature -40°C to +100°C
Storage Temperature -40°C to +120°C
Dip/Drag Solder Temperature 260°C for 6 secs
Through-the-Wave Preheat Temperature 145°C
Through-the-Wave Solder Temperature 245°C for 3 secs
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents between
10 mA and 30 mA are recommended. For more information, please refer to Application Brief
I-024.
7
Electrical/Optical Characteristics Table
TA = 25˚C
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage IF = 20 mA
Amber (λd = 590 nm) 2.02 2.5
Red (λd = 626 nm) VF1.90 2.5 V
Amber (λd = 592 nm) 2.15 2.5[1]
Red (λd = 630 nm) 2.00 2.5[1]
Reverse Voltage VR520 VI
R
= 100 µA
Peak Wavelength Peak of Wavelength of Spectral
Amber (λd = 590 nm) 592 Distribution at IF = 20 mA
Red (λd = 626 nm) λPEAK 635 nm
Amber (λd = 592 nm) 594
Red (λd = 630 nm) 639
Spectral Halfwidth ∆λ1/2 17 nm Wavelength Width at Spectral Distribution
1/2 Power Point at IF = 20 mA
Speed of Response τs20 ns Exponential Time Constant, e-t/τS
Capacitance C 40 pF VF = 0, f = 1 MHz
Luminous Efficacy Emitted Luminous Power/Emitted
Amber (λd = 590 nm) 480 Radiant Power at IF = 20 mA
Red (λd = 626 nm) ηV150 lm/w
Amber (λd = 592 nm) 500
Red (λd = 630 nm) 155
Thermal Resistance RθJ-PIN 240 °C/W LED Junction-to-Cathode Lead
Notes:
1. For options -xxRxx and -xxTxx, maximum forward voltage, VF is 2.6 V.
2. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
3. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie=Iv/ηv where Iv is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/watt.
Figure 1. Relative intensity vs. wavelength.
WAVELENGTH – nm
RELATIVE INTENSITY
500 550 650 700
1.0
0.5
0
AMBER
600
RED
8
Figure 2. Forward current vs. forward
voltage.
Figure 3. Relative luminous intensity vs.
forward current.
Figure 4. Maximum forward current vs.
ambient temperature.
Figure 5. Representative spatial radiation pattern for 6° viewing angle lamps.
Figure 6. Representative spatial radiation pattern for 15° viewing angle lamps.
I
F
– FORWARD CURRENT – mA
1.0
0
V
F
– FORWARD VOLTAGE – V
2.5
100
40
30
1.5 2.0
60
3.0
10
20
50 RED
AMBER
70
80
90
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
0
I
F
– DC FORWARD CURRENT – mA
40
3.0
2.0
1.5
1.0
0.5
20 60
2.5
I
F
– FORWARD CURRENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – °C
40 80
50
40
30
20
10
20 60 100
Rθ
JA
= 585° C/W
Rθ
JA
= 780° C/W
RELATIVE INTENSITY – %
100
0
θ – ANGULAR DISPLACEMENT – DEGREES
80
60
50
70
20
-20 -15
10
30
40
-10 0 5 10 15 20 25
90
-25 -5
RELATIVE INTENSITY – %
100
0
θ – ANGULAR DISPLACEMENT – DEGREES
80
60
50
70
20
10
30
40
90
-20 -15 -10 0 5 10 15 20 25-25 -5
9
Intensity Bin Limits (mcd at 20 mA)
Bin ID Min. Max.
K 310 400
L 400 520
M 520 680
N 680 880
P 880 1150
Q 1150 1500
R 1500 1900
S 1900 2500
T 2500 3200
U 3200 4200
V 4200 5500
Tolerance for each bin limit is ± 15%.
Figure 8. Representative spatial radiation pattern for 30° viewing angle lamps.
Amber Color Bin Limits
(nm at 20 mA)
Bin ID Min. Max.
1 584.5 587.0
2 587.0 589.5
4 589.5 592.0
6 592.0 594.5
7 594.5 597.0
Tolerance for each bin limit is
±0.5 nm.
Note:
1. Bin categories are established for classifi-
cation of products. Products may not be
available in all bin categories. Please
contact your local Agilent representatives
for further information.
Figure 7. Representative spatial radiation pattern for 23° viewing angle lamps.
RELATIVE INTENSITY – %
100
0
θ – ANGULAR DISPLACEMENT – DEGREES
80
60
50
70
20
10
30
40
90
-20 -15 -10 0 5 10 15 20 25-25 -5
RELATIVE INTENSITY – %
100
0
θ – ANGULAR DISPLACEMENT – DEGREES
80
60
50
70
20
10
30
40
90
-20 -15 -10 0 5 10 15 20 25-25 -5
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
September 24, 2001
Obsoletes 5988-2062EN
5988-4274EN