Panel Mount DataSheet H12WD Series * Ratings from 25A to 125A @ 48-660 VAC * Low off-state leakage current (snubberless) * SCR output for heavy industrial loads * Zero turn-on or instantaneous turn-on outputs * UL/CSA/VDE Approved, CE Compliant to EN60950-1 * Improved SEMS screw and washer * Redesigned housing with anti-rotation barriers * DC control * Direct Bond Copper substrate * EMC Compliant to Level 3 * Direct Power Lead Frame * Epoxy Free Design For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 4-32 VDC 25A 50A H12WD4825 H12WD4850 AVAILABLE OPTIONS Series H1 Rated Load Current 25: 25 Amps 50: 50 Amps 75: 75 Amps 90: 90 Amps 125: 125 Amps Transient Overvoltage 2WD: 1200 Vpk 2WD 48 75A 25 Operating Voltage 48: 48-660 VAC 90A H12WD4875 K Overvoltage Protection Blank: Not Included P: Included (6) P Termination Blank: Screw F: Quick Connect (5) K: Round standoffs 125A H12WD4890 G H12WD48125 Thermal Pad Blank: Not Included H: Included H -10 Input Status LED Blank: Not Included G: Included Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On (7) Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-440Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] Maximum Load Current [Arms] (2) Minimum Load Current [mArms] Maximum 1 Cycle Surge Current (50/60Hz) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vrms] Thermal Resistance Junction to Case (Rjc) [C/W] Maximum 1/2 Cycle I t for Fusing (50/60Hz) [A sec] Minimum Power Factor (at Maximum Load) 25A 48-660 1200 1.0 500 25 150 239/250 1.15 0.8 285/259 0.5 50A 48-660 1200 1.0 500 50 150 597/625 1.15 0.45 1779/1621 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage (3) Minimum Turn-Off Voltage Minimum Input Current Maximum Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. DC Control 4-32 VDC 4.0 VDC 1 .0 VDC 7 mADC 12 mADC Current Regulated 1/2 Cycle 1/2 Cycle 75A 48-660 1200 1.0 500 75 150 954/1000 1.15 0.3 4555/4150 0.5 90A 48-660 1200 1.0 500 90 150 1145/1200 1.15 0.27 6560/5976 0.5 125A 48-660 1200 1.0 500 125 150 1670/1750 1.15 0.22 13950/12709 0.5 Panel Mount DataSheet GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) 4000 Vrms 109 Ohm 8 pF -40 to 80 C -40 to 125 C 2.6 oz (74.9 g) 94 V-0 Aluminum 13-15 /1.5-1.7 18-20 / 2.0-2.2 18-20 / 2.0-2.2 85% non-condensing w/"G" option (green) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Housing Material Baseplate Material Input Terminal Screw Torque Range (in-lbs/Nm) Load Terminal Screw Torque Range (in-lbs/Nm) SSR Mounting Screw Torque Range (in-lbs/Nm) Humidity LED Input Status Indicator WIRING DIAGRAM AC 1 2 ( ) OUTPUT 2 Input Output S O L I D S TAT E R E L AY 4 INPUT 4 (-) Wire Size (Solid / Stranded) Terminals Wire Pull-Out Strength (lbs)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] 25 Input Current (mA) Load (10) 1 ( ) Input Current vs Input Voltage Standard Regulated "DC" Inputs Recommended Wire Sizes V 20 15 10 5 0 0 3 5 10 15 20 DC Input Voltage 3 (+) EQUIVALENT CIRCUIT BLOCK DIAGRAM -DC 4 1 AC (8) +DC 3 Trigger Circuit Current Limiter Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. (9) 2 AC 25 30 Panel Mount DataSheet MECHANICAL SPECIFICATIONS (1) Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.18 [4.5] DIA. 2 S O L I D S TAT E R E L AY 4 Round Standoff Termination ("K" Option) 1 2.25 [57.3] 1.7 [43.2] 1.88 [47.6] Mounting Hole/Slot r 0.09 [2.2] 1.0 [25.4] 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] INPUT 1.0 [25.4] 1.75 [44.5] 1.31 [33.4] 1.1 [27.9] 0.49 [12.4] Mounting Hole/Slot 0.18 [4.5] DIA. 1 2.25 [57.3] 1.7 [43.2] 1.88 [47.6] 0.89 [22.6] 1.25 [31.8] Mounting Hole/Slot r 0.09 [2.2] GENERAL NOTES (1) All parameters at 25C unless otherwise specified. (2) Heat sinking required, see derating curves. (3) Increase minimum voltage by 1V for operations from -20 to -40C. (4) Turn-on time for Instantaneous turn-on versions is 0.02 msec. (5) Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs. (6) Output will self trigger between 900-1200Vpk, not suitable for capacitive loads. (7) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only. (8) Elective Input Status LED, "G" option. (9) Elective Overvoltage Protection, "P" option. (10) Load can be wired to either SSR output terminal 1 or 2. Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. OUTPUT 8-32 Output Screw (2 places) Faston Terminal 0.25 x 0.032 (4 places) INPUT 1.0 [25.4] 1.75 [44.5] 1.31 [33.4] 2 S O L I D S TAT E R E L AY 4 3 6-32 Input Screw (2 places) Faston Terminal 0.187 x 0.032 (2 places) 0.89 [22.6] Quick Connect Termination ("F" Option) - Up to 50 Amp (5) 2 S O L I D S TAT E R E L AY 4 Mounting Hole/Slot r 0.09 [2.2] OUTPUT 8-32 Output Screw (2 places) Faston Terminal 0.25 x 0.032 (2 places) Mounting Hole/Slot r 0.09 [2.2] 1.75 [44.5] Quick Connect Termination ("F" Option) - Up to 25 Amp (5) 2.25 [57.3] 1.7 [43.2] 3 1.0 [25.4] 0.92 [23.3] 1.75 [44.5] Mounting Hole/Slot 0.18 [4.5] DIA. INPUT 1.08 [27.5] 2 S O L I D S TAT E R E L AY 4 3 OUTPUT Mounting Hole/Slot 0.18 [4.5] DIA. 2.25 [57.3] 1.7 [43.2] 3 6-32 Input Screw (2 places) Faston Terminal 0.187 x 0.032 (2 places) 0.89 [22.6] 1.25 [31.8] Panel Mount DataSheet SURGE CURRENT INFORMATION 25 A 50 A 600 200 Surge Current (Amp) Surge Current (Amp) 250 150 100 50 0 0.01 0.1 1 500 400 300 200 100 0 0.01 10 Surge Duration (Secs) 0.1 10 90 A 1200 1050 Surge Current (Amp) Surge Current (Amp) 75 A 900 800 700 600 500 400 300 200 100 0 0.01 1 Surge Duration (Secs) 0.1 1 900 750 600 450 300 150 10 0 0.01 Surge Duration (Secs) 0.1 Surge Current (Amp) 1800 1600 1400 1200 1000 800 600 400 200 0 0.01 1 10 Surge Duration (Secs) 125 A 0.1 1 10 Surge Duration (Secs) Non repetitive peak surge current at Tj initial 40C. THERMAL DERATE INFORMATION 25 A 1.5C/W 50 A 2C/W 0.7C/W 3C/W 15 10 5 30 40 50 60 70 30 20 10 80 20 30 40 Ambient Temperature (C) 50 60 70 90 80 70 60 50 40 30 20 10 0 45 30 15 0 80 20 30 0.7C/W 40 50 125 A 1C/W 0.5C/W 1.5C/W 1C/W 0.7C/W 120 20 30 40 50 60 70 80 Ambient Temperature (C) Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. 60 Ambient Temperature (C) 90 A 0.5C/W 1.5C/W 1C/W 60 Ambient Temperature (C) Load Current (Amps) 20 40 0 0.7C/W 75 Load Current (Amps) Load Current (Amps) 20 0 75 A 0.5C/W 2C/W 1.5C/W 50 Load Current (Amps) Load Current (Amps) 25 1C/W 100 80 60 40 20 0 20 30 40 50 60 Ambient Temperature (C) 70 80 70 80 Panel Mount DataSheet AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge - Level 3 IEC 61000-4-4 : Electrically Fast Transients - Level 3 IEC 61000-4-5 : Electrical Surges - Level 3 IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz IEC 600068-2-27: Shock Resistance 15g/11ms E116949 (25, 50, 75 and 90A) E116950 (25 and 125A) LR81689 10143 UG ACCESORIES Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Part number: KS101 Clear plastic cover compatible with all new S1 designs. Safety covers provide added protection from electric shock when installing or checking equipment. Cover Hardware Kit KS101 HK1 HS501DR 5.0 TRM1 HSP-1 HK3 HS301 / HS301DR 3.0 TRM6 HSP-2 HK4 HS251 2.5 HS201 / HS201DR 2.0 HS172 1.7 HS151 / HS151DR 1.5 HS103 / HS103DR 1.0 HS072 0.7 HS053 0.5 Hardware Kit Part number: HK3 Bag with 2 threaded standoffs, 2 screws 8-32 x 1/4, and 2 lockwashers M8 for output, and 2 threaded standoffs, 2 screws 6-32 x 3/16, and 2 lockwashers M6 for input. Standoff screws provide additional mounting options such as "dead bug" mounting, using lug terminals or wire terminals to the side of the relay. Heat Sink Part No. Thermal Resistance Lug Terminal Thermal Pad [C/W] Hardware Kit Part number: HK4 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals. Rev. 082813 Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. Panel Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. * Disconnect all power before installing or working with this equipment. * Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. * Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo. * Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION * Eteindre toutes les sources d'energie de cet appareil avant de travailler dessus de cet appareil GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION. * Stellen Sie jeglichen Strom ab, der dieses Gerat versorgt, bevor Sie an dem Gerat Arbeiten durchfuhren * Vor dem Drehen auf Energie alle Anschlusse uberprufen und alle Abdeckungen ersetzen. * Verifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lesions serieuses serieuses. Unterlassung dieser Anweisungen konnen zum Tode oder zu schweren Verletzungen fuhren. RISCHIO DI SCOSSA ELETTRICA O DELL'ESPLOSI ONE. * Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra * * Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one L'omissione di seguire queste istruz ioni provochera la morte o di lesioni serie WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER GEFAHR VON MATERIALSCHADEN UND GEHAUSEERHITZUNG * The product's side panels may be hot, allow the product to cool before touching. * Follow proper mounting instructions including torque values. * Do not allow liquids or foreign objects to enter this product. * Les panneaux lateraux du produit peuvent etre chauds. Laisser le produit refroidir avant de le toucher. * Respecter les consignes de montage, et notamment les couples de serrage. * Ne pas laisser penetrer de liquide ni de corps etrangers a l'interieur du produit. * Die Seitenwande konnen hei sein. Lassen Sie das Produkt abkuhlen, bevor Sie es beruhren. * Beachten Sie die Montageanweisungen, * Fuhren Sie keine Flussigkeiten oder Fremdkorper in das Produkt ein. Le non-respect de cette directive peut entrainer, Failure to follow these instructions can result in des lesions corporelles graves ou des serious injury, or equipment damage. dommages materiels. Die Nichtbeachtung dieser Anweisung kann Korperverletzung oder Materialschaden zur Folge haben. RIESGO DE DANOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO * Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfrie antes de tocarlo. * Respetar las instrucciones de montaje, y en particular los pares de apretado. * No dejar que penetren liquidos o cuerpos extranos en el producto. * I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. * Seguire le istruzioni di montaggio corrette. * Non far entrare liquidi o oggetti estranei in questo apparecchio. Si no se respetan estas precauciones pueden producirse graves lesiones, danos materiales. La mancata osservanza di questa precauzione puo causare gravi rischi per l'incolumita personale o danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. * * * Panel Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People's Republic of China Electronic Industry Standard SJ/T11364 - 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr (VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Semiconductor die Solder - SJ/T11364 - 2006, (Pb) (Hg) (Cd) (Cr (VI)) 50 Do not forget to visit us at: www.crydom.com Copyright (c) 2013 Crydom Inc. Specifications subject to change without notice. (PBB) (PBDE)