1 Non-dimming/Connector Type CXA-L0524-NJL Features Applications 1 output UL60950 approved Applicable panel size*: 3 to 15 inches In the high-voltage generator(a terminal and a pattern), an anti-dust measure by silicone application is taken. (Notice) Applicable panel size becomes a standard. CXA-L0524-NJL SpecificationsPlease refer to each specification before use Electrical Characteristics Item Unit Symbol Output Current mArms Iout Input Current A Frequency kHz Open Circuit Voltage Vrms Iin Freq Vopen min 4.5 4.0 26 1400 Specification typ 5.0 5.0 0.15 32 1500 max 5.5 6.0 0.25 38 - Vin(V) 24 0.24 24 1.2 24 1.2 24 1.2 24 1.2 Condition Ta( ) 23 5 0 to +60 0 to +60 0 to +60 0 to +60 RL(k) 120 110 to 130 110 to 130 110 to 130 Remark Open load Other Specifications Dimming Function Operating Temperature Storage Temperature Operating Humidity Ratio Safety Standard Weight Dimensions(WxDxH) Fused Input Remote ON OFF Alarm Signal Function Shutdown Function RH% g mm No 0 to +60 -30 to +85 95Max UL60950 11 80.5x20.5x8 (*1) Yes No No No Silicone Coating on High Voltage Area Conformity to RoHs Directive This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Yes (*1) These dimensions are indicated the maximum. All specifications are subject to change without notice. 001-01/20080228/etl_cxa_l0524_njl 2 CXA-L0524-NJL Outline Drawing Product name, Lot No., Country of origin, TDK-Lambda logotype, UL standard marking Silicone (45) High-voltage generator (The entire surface within a range of 45mm away from the end of the basein) unit:mm From high-voltage generator, please secure space distance more than 3mm in top and bottom right and left. Connector Connector number Part number Model Quantity Remarks Printed circuit board PCB CompositeCEM-3 1 UL94V-0 t=1.0 Input connector CN1 53261-0571 1 Molex Inc. 51021-0500 Output connector CN2 SM028.0B-BHS-1-TBLF SN 1 JST Mfg. Co., Ltd. BHR-03VS-1 Recommended applicable connector Terminal Numbers And Functions Input side CN1 Output side CN2 Terminal number Symbol Rated voltage Terminal number Symbol Rated voltage CN1-1 Vin 24V CN2-1 VHIGH1 750Vrms CN1-2 GND 0V CN2-2 CN1-3 CN1-4 CN2-3 N.C. CN1-5 N.C. VHIGH2 750Vrms The output is floating. Both CN2-1 and CN2-3 become high voltage. Connections RLLoad resistance7W minimum All specifications are subject to change without notice.