SML4728 to SML4764A Vishay Semiconductors Surface Mount Zener Diodes FEATURES * Plastic package has underwriters laboratory flammability classification 94 V-0 * For surface mounted applications * Low Zener impedance * Low regulation factor * High temperature soldering guaranteed: 260 C/10 s at terminals * Standard voltage tolerance is 10 %, suffix A 5 % * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-214AC Terminals: solder plated, solderable per MIL-STD- 750, method 2026 Polarity: color band denotes positive end (cathode) Mounting position: any Weight: 0.002 ounce, 64 mg 15811 Packaging codes/options (antistatic): SML4728 - SML4764A: 61 to 1.8 k per 7" plastic reel (12 mm tape) 5A to 7.5 k per 13" plastic reel (12 mm tape) Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Power dissipation Test condition Symbol Value Unit TL = 75 C Ptot 1 W Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Symbol Value Unit Maximum junction temperature Tj 150 C Storage temperature range TS - 65 to + 150 C Document Number 85782 Rev. 1.6, 22-Oct-08 Test condition For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 1 SML4728 to SML4764A Vishay Semiconductors Electrical Characteristics Partnumber Device marking code Nominal zener voltage Test current VZ (1) at IZT IZT Maximum dynamic impedance resistance ZZT at IZT Maximum DC reverse leakage current ZZK at IZK IZK Maximum surge current IR VR IRM (2) V mA mA A V mApk SML4728 3P3 3.3 76 10 400 1 100 1 1380 SML4729 3P6 3.6 69 10 400 1 100 1 1260 SML4730 3P9 3.9 64 9 400 1 50 1 1190 SML4731 4P3 4.3 58 9 400 1 10 1 1070 SML4732 4P7 4.7 53 8 500 1 10 1 970 SML4733 5P1 5.1 49 7 550 1 10 1 890 SML4734 5P6 5.6 45 5 600 1 10 2 810 SML4735 6P2 6.2 41 2 700 1 10 3 730 SML4736 6P8 6.8 37 3.5 700 1 10 4 660 SML4737 7P5 7.5 34 4 700 0.5 10 5 605 SML4738 8P2 8.2 31 4.5 700 0.5 10 6 550 SML4739 9P1 9.1 28 5 700 0.5 10 7 500 SML4740 10 10 25 7 700 0.25 10 7.6 454 SML4741 11 11 23 8 700 0.25 5 8.4 414 SML4742 12 12 21 9 700 0.25 5 9.1 380 SML4743 13 13 19 10 700 0.25 5 9.9 344 SML4744 15 15 17 14 700 0.25 5 11.4 305 SML4745 16 16 15.5 16 700 0.25 5 12.2 285 SML4746 18 18 14 20 750 0.25 5 13.7 250 SML4747 20 20 12.5 22 750 0.25 5 15.2 225 SML4748 22 22 11.5 23 750 0.25 5 16.7 205 SML4749 24 24 10.5 25 750 0.25 5 18.2 190 SML4750 27 27 9.5 35 750 0.25 5 20.6 170 SML4751 30 30 8.5 40 1000 0.25 5 22.8 150 SML4752 33 33 7.5 45 1000 0.25 5 25.1 135 SML4753 36 36 7 50 1000 0.25 5 27.4 125 SML4754 39 39 6.5 60 1000 0.25 5 29.7 115 SML4755 43 43 6 70 1500 0.25 5 32.7 110 SML4756 47 47 5.5 80 1500 0.25 5 35.8 95 SML4757 51 51 5 95 1500 0.25 5 38.8 90 SML4758 56 56 4.5 110 2000 0.25 5 42.6 80 SML4759 62 62 4 125 2000 0.25 5 47.1 70 SML4760 68 68 3.7 150 2000 0.25 5 51.7 65 SML4761 75 75 3.3 175 2000 0.25 5 56 60 SML4762 82 82 3 200 3000 0.25 5 62.2 55 SML4763 91 91 2.8 250 3000 0.25 5 69.2 50 SML4764 100 100 2.5 350 3000 0.25 5 76 45 Notes: (1) Based on dc- measurement at thermal equilibrium (2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC method www.vishay.com 2 For technical support, please contact: DiodesSSP@vishay.com Document Number 85782 Rev. 1.6, 22-Oct-08 SML4728 to SML4764A Vishay Semiconductors TYPICAL CHARACTERISTICS 60 Hz Resistive or Inductive Load 0.75 0.5 0.25 P.C.B. Mounted on 0.31 x 0.31 x 0.08" (8 x 8 x 2mm) copper areas pads 0 25 50 75 100 125 150 Terminals Temperature ( C) 17923 ZZ , Dynamic Zener Impedance () TJ = 25C VZ = 91V VZ = 56V VZ = 30V VZ = 6.2V 1 0.5 10 100 IZT, Zener Test Current (mA) 17925 VZ, Temperature Coefficient (mV/ C) 0.1 Pulse width = 300s 1% Duty Cycle TJ = 25C 0.01 0.4 1.4 1.2 1.0 0.8 0.6 Instantaneous Forward Voltage (V) 1.6 Fig. 4 - Typical Instantaneous Forward Characteristics for SML4763 500 Fig. 2 - Typical Zener Impedance 17927 1 17924 1,000 10 10 175 Fig. 1 - Maximum Continuous Power Dissipation 100 Instantaneous Forward Current (A) 1.0 Instantaneous Reverse Current ( A) PM(AV), Average Power Dissipation (W) Tamb = 25 C, unless otherwise specified 10 1 TJ = 100C 0.1 TJ = 25C 0.01 0 17926 20 80 60 40 Percent of Rated Zener Voltage (%) 100 Fig. 5 - Typical Reverse Characteristics 110 90 70 Tested at rated IZT 50 30 10 0 0 10 20 30 40 50 60 70 80 90 100 VZ, Zener Voltage (V) Fig. 3 - Typical Temperature Coefficients Document Number 85782 Rev. 1.6, 22-Oct-08 For technical support, please contact: DiodesSSP@vishay.com www.vishay.com 3 SML4728 to SML4764A Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (Inches): DO-214AC 0.305 (0.012) 0.152 (0.006) 2.29 (0.090) 1.98 (0.078) ISO Method E 1.52 (0.060) 0.76 (0.030) 5.28 (0.208) 4.93 (0.194) Mounting Pad Layout Cathode Band 2.38 (0.094) max. 1.65 (0.065) 2.79 (0.110) 1.25 (0.049) 2.54 (0.100) 2.15 (0.084). 1.32 (0.052) max. 4.50 (0.177) 18839 www.vishay.com 4 5.58 (0.22) Ref. 3.99 (0.157) For technical support, please contact: DiodesSSP@vishay.com Document Number 85782 Rev. 1.6, 22-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1