CLD-DS102 Rev 2O Product family data sheet Cree(R) XLamp(R) MHB-A LEDs Product Description FEATURES Table of Contents The XLamp(R) MHB-A LED is a new * Flexible 9V, 18V or 36V options Characteristics............................................2 generation of highpower LED that * Maximum drive current: 700 mA (9 V), Flux Characteristics, EasyWhite(R) Order 350 mA (18 V), 175 mA (36 V) Codes and Bins - 9 V...................................3 delivers a more effective way to achieve lowcost systems than midpower (MP) * Viewing angle: 115 Flux Characteristics, EasyWhite(R) Order LEDs. Built using Cree's highreliability * Available in 70CRI, 80CRI and 90CRI Codes and Bins - 18 V.................................6 options Flux Characteristics, EasyWhite(R) Order ceramicpackage technology, the XLamp MHB-A LED is able to operate at higher * Unlimited floor life at 30 C/85% RH Codes and Bins - 36 V.................................9 temperatures than MP LEDs with no * Reflow solderable - JEDEC Relative Spectral Power Distribution.......12 JSTD020C Relative Flux vs. Junction Temperature...12 reduction in rated lifetime, enabling an impressive 60% reduction in heat sink * Electrically neutral thermal path Electrical Characteristics..........................13 size and cost. Using up to 26 times * RoHS and REACh compliant Relative Flux vs. Current...........................14 fewer LEDs than MP LEDs to achieve * UL recognized component (E349212) Relative Chromaticity vs. Current.............16 the same performance, the XLamp (R) Relative Chromaticity vs. Temperature....17 MHB-A LED is optimized to simplify Typical Spatial Distribution.......................17 LED system designs for directional and Thermal Design.........................................18 semidirectional applications. Performance Groups - Luminous Flux...19 Performance Groups - Chromaticity.......20 Cree's Standard White Chromaticity Regions Plotted on the 1931 CIE Curve...21 Bin and Order Code Formats....................22 Reflow Soldering Characteristics.............23 Notes.........................................................24 Mechanical Dimensions...........................26 www.cree.com/Xlamp Tape and Reel............................................27 Packaging..................................................28 Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) MHB-A LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 5.5 degrees 115 Temperature coefficient of voltage (9 V) mV/C -4 Temperature coefficient of voltage (18 V) mV/C -8 Temperature coefficient of voltage (36 V) mV/C -16 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical V Maximum 8000 DC forward current (9 V) mA 480 700 DC forward current (18 V) mA 240 350 DC forward current (36 V) mA 120 175 Reverse current (9 V, 18 V, 36 V) mA 0.1 Forward voltage (9 V, @ 480 mA, 85 C) V 9.25 Forward voltage (9 V, @ 480 mA, 25 C) V Forward voltage (18 V, @ 240 mA, 85 C) V Forward voltage (18 V, @ 240 mA, 25 C) V Forward voltage (36 V, @ 120 mA, 85 C) V Forward voltage (36 V, @ 120 mA, 25 C) V 42 LED junction temperature C 150 10.5 18.5 21 37 Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 9 V The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 22). Test condition: TJ = 85 C, 9 V, IF = 480 mA Nominal CCT CRI Min 70 6500 K 80 90 70 5700 K 80 90 Minimum Luminous Flux @ 480 mA 2-Step 3-Step 5-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 MHBAWT-0000000C0BE265E C4 475 531 MHBAWT-0000000C0HC465E D2 510 570 D4 550 615 MHBAWT-0000000C0HD465E B4 410 459 MHBAWT-0000000C0UB465E C2 440 492 C4 475 531 MHBAWT-0000000C0UC465E D2 510 570 MHBAWT-0000000C0BD257E D4 550 615 E2 590 660 MHBAWT-0000000C0BE257E C4 475 531 MHBAWT-0000000C0HC457E D2 510 570 D4 550 615 MHBAWT-0000000C0HD457E B4 410 459 MHBAWT-0000000C0UB457E C2 440 492 C4 475 531 Group Order Code Group Order Code Group Order Code MHBAWT-0000000C0BD265E 65E 65E 65E 57E 57E 57E MHBAWT-0000000C0BD465E MHBAWT-0000000C0HD265E MHBAWT-0000000C0UC265E MHBAWT-0000000C0BD457E MHBAWT-0000000C0HD257E MHBAWT-0000000C0UC257E MHBAWT-0000000C0UC457E Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 9 V - Continued Nominal CCT CRI Min 70 5000 K 80 90 Minimum Luminous Flux @ 480 mA 2-Step 3-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 C4 475 531 D2 510 570 D4 550 615 MHBAWT-0000000C0HD450G MHBAWT-0000000C0HD450E B4 410 459 MHBAWT-0000000C0UB450G MHBAWT-0000000C0UB450E C2 440 492 C4 475 531 C4 475 531 MHBAWT-0000000C0BC440E D2 510 570 MHBAWT-0000000C0BD240E D4 550 615 MHBAWT-0000000C0BD440E E2 590 660 MHBAWT-0000000C0BE240E C4 475 531 D2 510 570 MHBAWT-0000000C0HD240H B2 380 425 MHBAWT-0000000C0UB240H B4 410 459 C2 440 492 Group Order Code Group Order Code 50E Order Code MHBAWT-0000000C0BD450E MHBAWT-0000000C0BE250E MHBAWT-0000000C0HC450G 50G 50G MHBAWT-0000000C0HD250G MHBAWT-0000000C0UC250G MHBAWT-0000000C0HC450E 50E 50E MHBAWT-0000000C0UC450G 40H 40H MHBAWT-0000000C0HC440H MHBAWT-0000000C0UB440H MHBAWT-0000000C0UC240H 40G MHBAWT-0000000C0HD250E MHBAWT-0000000C0UC250E MHBAWT-0000000C0UC450E 40E 80 90 Group MHBAWT-0000000C0BD250E 70 4000 K 5-Step MHBAWT-0000000C0HC440G MHBAWT-0000000C0HD240G MHBAWT-0000000C0UB240G 40G MHBAWT-0000000C0UB440G MHBAWT-0000000C0UC240G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 9 V - Continued Nominal CCT CRI Min Minimum Luminous Flux @ 480 mA 2-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* C4 475 531 D2 510 570 MHBAWT-0000000C0HD235H A2 330 369 MHBAWT-0000000C0UA235H MHBAWT-0000000C0UA235G A4 355 397 MHBAWT-0000000C0UA435H MHBAWT-0000000C0UA435G B2 380 425 MHBAWT-0000000C0UB235H B4 410 459 MHBAWT-0000000C0UB435H MHBAWT-0000000C0UB435G C2 440 492 MHBAWT-0000000C0HC230H MHBAWT-0000000C0HC230G C4 475 531 D2 510 570 MHBAWT-0000000C0HD230H MHBAWT-0000000C0HD230G A2 330 369 MHBAWT-0000000C0UA230H MHBAWT-0000000C0UA230G A4 355 397 MHBAWT-0000000C0UA430H MHBAWT-0000000C0UA430G B2 380 425 MHBAWT-0000000C0UB230H B4 410 459 MHBAWT-0000000C0UB430H MHBAWT-0000000C0UB430G C2 440 492 MHBAWT-0000000C0HC227H MHBAWT-0000000C0HC227G C4 475 531 MHBAWT-0000000C0HC427H A2 330 369 MHBAWT-0000000C0UA227H MHBAWT-0000000C0UA227G A4 355 397 MHBAWT-0000000C0UA427H MHBAWT-0000000C0UA427G B2 380 425 MHBAWT-0000000C0UB227H B4 410 459 MHBAWT-0000000C0UB427H 80 Group 35H 3500 K 90 80 3000 K 3-Step 35H 90 30H 30H 80 27H 2700 K 90 27H Order Code MHBAWT-0000000C0HC435H MHBAWT-0000000C0HC430H Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code MHBAWT-0000000C0HC435G MHBAWT-0000000C0HD235G MHBAWT-0000000C0UB235G MHBAWT-0000000C0HC430G MHBAWT-0000000C0UB230G MHBAWT-0000000C0HC427G MHBAWT-0000000C0UB227G MHBAWT-0000000C0UB427G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 18 V The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 22). Test condition: TJ = 85 C, 18 V, IF = 240 mA Nominal CCT CRI Min 70 6500 K 80 90 70 5700 K 80 90 Minimum Luminous Flux @ 240 mA 2-Step 3-Step 5-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 MHBAWT-0000000F0BE265E C4 475 531 MHBAWT-0000000F0HC465E D2 510 570 D4 550 615 MHBAWT-0000000F0HD465E B4 410 459 MHBAWT-0000000F0UB465E C2 440 492 C4 475 531 MHBAWT-0000000F0UC465E D2 510 570 MHBAWT-0000000F0BD257E D4 550 615 E2 590 660 MHBAWT-0000000F0BE257E C4 475 531 MHBAWT-0000000F0HC457E D2 510 570 D4 550 615 MHBAWT-0000000F0HD457E B4 410 459 MHBAWT-0000000F0UB457E C2 440 492 C4 475 531 Group Order Code Group Order Code Group Order Code MHBAWT-0000000F0BD265E 65E 65E 65E 57E 57E 57E MHBAWT-0000000F0BD465E MHBAWT-0000000F0HD265E MHBAWT-0000000F0UC265E MHBAWT-0000000F0BD457E MHBAWT-0000000F0HD257E MHBAWT-0000000F0UC257E MHBAWT-0000000F0UC457E Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 18 V - Continued Nominal CCT CRI Min 70 5000 K 80 90 Minimum Luminous Flux @ 240 mA 2-Step 3-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 C4 475 531 D2 510 570 D4 550 615 MHBAWT-0000000F0HD450G MHBAWT-0000000F0HD450E B4 410 459 MHBAWT-0000000F0UB450G MHBAWT-0000000F0UB450E C2 440 492 C4 475 531 C4 475 531 MHBAWT-0000000F0BC440E D2 510 570 MHBAWT-0000000F0BD240E D4 550 615 MHBAWT-0000000F0BD440E E2 590 660 MHBAWT-0000000F0BE240E C4 475 531 D2 510 570 MHBAWT-0000000F0HD240H B2 380 425 MHBAWT-0000000F0UB240H B4 410 459 C2 440 492 Group Order Code Group Order Code 50E Order Code MHBAWT-0000000F0BD450E MHBAWT-0000000F0BE250E MHBAWT-0000000F0HC450G 50G 50G MHBAWT-0000000F0HD250G MHBAWT-0000000F0UC250G MHBAWT-0000000F0HC450E 50E 50E MHBAWT-0000000F0UC450G 40H 40H MHBAWT-0000000F0HC440H MHBAWT-0000000F0UB440H MHBAWT-0000000F0UC240H 40G MHBAWT-0000000F0HD250E MHBAWT-0000000F0UC250E MHBAWT-0000000F0UC450E 40E 80 90 Group MHBAWT-0000000F0BD250E 70 4000 K 5-Step MHBAWT-0000000F0HC440G MHBAWT-0000000F0HD240G MHBAWT-0000000F0UB240G 40G MHBAWT-0000000F0UB440G MHBAWT-0000000F0C240G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 18 V - Continued Nominal CCT CRI Min Minimum Luminous Flux @ 240 mA 2-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* C4 475 531 D2 510 570 MHBAWT-0000000F0HD235H A2 330 369 MHBAWT-0000000F0UA235H MHBAWT-0000000F0UA235G A4 355 397 MHBAWT-0000000F0UA435H MHBAWT-0000000F0UA435G B2 380 425 MHBAWT-0000000F0UB235H B4 410 459 MHBAWT-0000000F0UB435H MHBAWT-0000000F0UB435G C2 440 492 MHBAWT-0000000F0HC230H MHBAWT-0000000F0HC230G C4 475 531 D2 510 570 MHBAWT-0000000F0HD230H MHBAWT-0000000F0HD230G A2 330 369 MHBAWT-0000000F0UA230H MHBAWT-0000000F0UA230G A4 355 397 MHBAWT-0000000F0UA430H MHBAWT-0000000F0UA430G B2 380 425 MHBAWT-0000000F0UB230H B4 410 459 MHBAWT-0000000F0UB430H MHBAWT-0000000F0UB430G C2 440 492 MHBAWT-0000000F0HC227H MHBAWT-0000000F0HC227G C4 475 531 MHBAWT-0000000F0HC427H A2 330 369 MHBAWT-0000000F0UA227H MHBAWT-0000000F0UA227G A4 355 397 MHBAWT-0000000F0UA427H MHBAWT-0000000F0UA427G B2 380 425 MHBAWT-0000000F0UB227H B4 410 459 MHBAWT-0000000F0UB427H 80 Group 35H 3500 K 90 80 3000 K 3-Step 35H 90 30H 30H 80 27H 2700 K 90 27H Order Code MHBAWT-0000000F0HC435H MHBAWT-0000000F0HC430H Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code MHBAWT-0000000F0HC435G MHBAWT-0000000F0HD235G MHBAWT-0000000F0UB235G MHBAWT-0000000F0HC430G MHBAWT-0000000F0UB230G MHBAWT-0000000F0HC427G MHBAWT-0000000F0UB227G MHBAWT-0000000F0UB427G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 36 V The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 22). Test condition: TJ = 85 C, 36 V, IF = 120 mA Nominal CCT CRI Min 70 6500 K 80 90 70 5700 K 80 90 Minimum Luminous Flux @120 mA 2-Step 3-Step 5-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 MHBAWT-0000000N0BE265E C4 475 531 MHBAWT-0000000N0HC465E D2 510 570 D4 550 615 MHBAWT-0000000N0HD465E B4 410 459 MHBAWT-0000000N0UB465E C2 440 492 C4 475 531 MHBAWT-0000000N0UC465E D2 510 570 MHBAWT-0000000N0BD257E D4 550 615 E2 590 660 MHBAWT-0000000N0BE257E C4 475 531 MHBAWT-0000000N0HC457E D2 510 570 D4 550 615 MHBAWT-0000000N0HD457E B4 410 459 MHBAWT-0000000N0UB457E C2 440 492 C4 475 531 Group Order Code Group Order Code Group Order Code MHBAWT-0000000N0BD265E 65E 65E 65E 57E 57E 57E MHBAWT-0000000N0BD465E MHBAWT-0000000N0HD265E MHBAWT-0000000N0UC265E MHBAWT-0000000N0BD457E MHBAWT-0000000N0HD257E MHBAWT-0000000N0UC257E MHBAWT-0000000N0UC457E Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 36 V - Continued Nominal CCT CRI Min 70 5000 K 80 90 Minimum Luminous Flux @120 mA 2-Step 3-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* D2 510 570 D4 550 615 E2 590 660 C4 475 531 D2 510 570 D4 550 615 MHBAWT-0000000N0HD450G MHBAWT-0000000N0HD450E B4 410 459 MHBAWT-0000000N0UB450G MHBAWT-0000000N0UB450E C2 440 492 C4 475 531 C4 475 531 MHBAWT-0000000N0BC440E D2 510 570 MHBAWT-0000000N0BD240E D4 550 615 MHBAWT-0000000N0BD440E E2 590 660 MHBAWT-0000000N0BE240E C4 475 531 D2 510 570 MHBAWT-0000000N0HD240H B2 380 425 MHBAWT-0000000N0UB240H B4 410 459 C2 440 492 Group Order Code Group Order Code 50E Order Code MHBAWT-0000000N0BD450E MHBAWT-0000000N0BE250E MHBAWT-0000000N0HC450G 50G 50G MHBAWT-0000000N0HD250G MHBAWT-0000000N0UC250G MHBAWT-0000000N0HC450E 50E 50E MHBAWT-0000000N0UC450G 40H 40H MHBAWT-0000000N0HC440H MHBAWT-0000000N0UB440H MHBAWT-0000000N0UC240H 40G MHBAWT-0000000N0HD250E MHBAWT-0000000N0UC250E MHBAWT-0000000N0UC450E 40E 80 90 Group MHBAWT-0000000N0BD250E 70 4000 K 5-Step MHBAWT-0000000N0HC440G MHBAWT-0000000N0HD240G MHBAWT-0000000N0UB240G 40G MHBAWT-0000000N0UB440G MHBAWT-0000000N0C240G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) MHB-A LED Flux Characteristics, EasyWhite(R) Order Codes and Bins - 36 V - Continued Nominal CCT CRI Min Minimum Luminous Flux @120 mA 2-Step Group Flux (lm) @ 85 C Flux (lm) @ 25 C* C4 475 531 D2 510 570 MHBAWT-0000000N0HD235H A2 330 369 MHBAWT-0000000N0UA235H MHBAWT-0000000N0UA235G A4 355 397 MHBAWT-0000000N0UA435H MHBAWT-0000000N0UA435G B2 380 425 MHBAWT-0000000N0UB235H B4 410 459 MHBAWT-0000000N0UB435H MHBAWT-0000000N0UB435G C2 440 492 MHBAWT-0000000N0HC230H MHBAWT-0000000N0HC230G C4 475 531 D2 510 570 MHBAWT-0000000N0HD230H MHBAWT-0000000N0HD230G A2 330 369 MHBAWT-0000000N0UA230H MHBAWT-0000000N0UA230G A4 355 397 MHBAWT-0000000N0UA430H MHBAWT-0000000N0UA430G B2 380 425 MHBAWT-0000000N0UB230H B4 410 459 MHBAWT-0000000N0UB430H MHBAWT-0000000N0UB430G C2 440 492 MHBAWT-0000000N0HC227H MHBAWT-0000000N0HC227G C4 475 531 MHBAWT-0000000N0HC427H A2 330 369 MHBAWT-0000000N0UA227H MHBAWT-0000000N0UA227G A4 355 397 MHBAWT-0000000N0UA427H MHBAWT-0000000N0UA427G B2 380 425 MHBAWT-0000000N0UB227H B4 410 459 MHBAWT-0000000N0UB427H 80 Group 35H 3500 K 90 80 3000 K 3-Step 35H 90 30H 30H 80 27H 2700 K 90 27H Order Code MHBAWT-0000000N0HC435H MHBAWT-0000000N0HC430H Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code MHBAWT-0000000N0HC435G MHBAWT-0000000N0HD235G MHBAWT-0000000N0UB235G MHBAWT-0000000N0HC430G MHBAWT-0000000N0UB230G MHBAWT-0000000N0HC427G MHBAWT-0000000N0UB227G MHBAWT-0000000N0UB427G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) MHB-A LED Relative Spectral Power Distribution Relative Spectral Power Distribution 100% Relative Spectral Power 90% 80% 70% 60% 6500 K, 80 CRI 50% 5000 K, 80 CRI 40% 3000 K, 80 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux vs. Junction Temperature Relative Flux Output vs. Junction Temperature Test condition: 9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA Relative Luminous Flux 120% 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLamp (R) MHB-A LED Electrical Characteristics (TJ = 85 C) 700 Forward Current (mA) 600 500 400 9V 300 200 100 0 8.00 8.25 8.50 8.75 9.00 9.25 9.50 9.75 Forward Voltage (V) 350 Forward Current (mA) 300 250 200 18 V 150 100 50 0 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 Forward Voltage (V) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLamp (R) MHB-A LED Electrical Characteristics (Tj = 85C) Electrical Characteristics (TJ = 85 C) - Continued 175 Forward Current (mA) 150 125 100 36 V 75 50 25 0 32 33 34 35 36 37 38 39 Forward Voltage (V) Relative Flux vs. Current (TJ = 85 C) 140% Relative Luminous Flux 120% 100% 80% 9V 60% 40% 20% 0% 0 100 200 300 400 500 600 700 Forward Current (mA) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLamp (R) MHB-A LED Relative Flux vs. Current (TJ = 85 C) - Continued 140% Relative Luminous Flux 120% 100% 80% 18 V 60% 40% 20% 0% 0 50 100 150 200 250 300 350 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) 140% Relative Luminous Flux 120% 100% 80% 36 V 60% 40% 20% 0% 0 25 50 75 100 125 150 175 Forward Current (mA) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLamp (R) MHB-A LED Relative Chromaticity vs. Current (Warm White) 0.015 9V 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 100 200 300 400 500 600 700 Current (mA) 0.015 18 V 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 50 100 150 200 250 300 350 Current (mA) 0.015 36 V 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 25 50 75 100 125 150 175 Current (mA) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLamp (R) MHB-A LED Relative Chromaticity vs. Temperature (Warm White) Test condition: 9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 25 50 75 100 125 150 Tj (C) Typical Spatial Distribution Test condition: 9 V, If = 480 mA; 18 V, If = 240 mA; 36 V, IF = 120 mA Far Field 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLamp (R) MHB-A LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 800 Maximum Current (mA) 700 600 500 400 9V 300 Rj-a = 7 C/W 200 Rj-a = 10 C/W 100 Rj-a = 20 C/W 0 Rj-a = 15 C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) 400 Maximum Current (mA) 350 300 250 200 18 V 150 Rj-a = 7 C/W 100 Rj-a = 10 C/W 50 Rj-a = 20 C/W 0 Rj-a = 15 C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLamp (R) MHB-A LED Thermal Design Thermal Design - Continued 200 Maximum Current (mA) 175 150 125 100 36 V 75 Rj-a = 7 C/W 50 Rj-a = 10 C/W 25 Rj-a = 20 C/W 0 Rj-a = 15 C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Performance Groups - Luminous Flux (TJ = 85 C) XLamp MHB-A LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux A2 330 355 A4 355 380 B2 380 410 B4 410 440 C2 440 475 C4 475 510 D2 510 550 D4 550 590 E2 590 635 E4 635 680 Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLamp (R) MHB-A LED Performance Groups - Chromaticity XLamp MHB-A LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 2-Step Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 EasyWhite Color Temperatures - 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle () 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 53.2 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis Bin Code CCT 50G 40G EasyWhite Color Temperatures - 5-Step Ellipse Bin Code CCT 65E 6500 K Center Point x y a b Rotation Angle () 0.3123 0.3282 0.01110 0.00550 61.0 57E 5700 K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000 K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLamp (R) MHB-A LED Cree's Standard White Chromaticity Regions Plotted on the 1931 CIE Curve 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step 0.42 EasyWhite 3-Step 0.41 EasyWhite 2-Step 2700 K 3000 K 3500 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLamp (R) MHB-A LED Bin and Order Code Formats Bin codes and order codes for MHB-A LEDs are configured in the following manner: Order Code Bin Code Series MHBA = MHB-A Series MHBA = MHB-A Internal code Chromaticity bin CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Vf class C0 = 9-V class F0 = 18-V class N0 = 36-V class Chromaticity region Internal code SSSSCC-WWW-FF-GGN-AAAAA SSSSCC-HHHH-HHHGGNFFDDD Flux Vf class C0 = 9-V class F0 = 18-V class N0 = 36-V class Color WT = White CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Flux bin Color WT = White Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLamp (R) MHB-A LED Reflow Soldering Characteristics In testing, Cree has found XLamp MHB-A LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLamp (R) MHB-A LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MHB-A LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLamp (R) MHB-A LED Notes - Continued UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLamp (R) MHB-A LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. 4.70 4.70 All measurements are .13 mm unless otherwise indicated. 0.8 .1 5.00 6 6 5 5 NOTICE NOTICE THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. CREE CONFIDENTIAL. THIS PLOTARE AND THE INFORMATION CONTAINED WITHIN THE PROPRIETARY AND 5.00 CONTAINED WITHIN ARE THE PROPRIETARY CONFIDENTIAL INFORMATION OFAND CREE, INC. THIS PLOT CONFIDENTIAL OF CREE, INC. THIS MAY INFORMATION NOT BE COPIED, REPRODUCED ORPLOT DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED DISCLOSED TO ANY UNAUTHORIZED PERSON OR WITHOUT THE WRITTEN CONSENT OF CREE INC. WITHOUT UNAUTHORIZED PERSON THE WRITTEN CONSENT OF CREE INC. .50 .71.45 D OPTICAL REFERENCE 0 3.70 .50 .45 5.00 .45 5.00 Anode Side 3.70 .50 Cathode Side 4.78 .50 .50 4.70 REF. .80 .50 4.70 R2.26 .25 View .97 .50 2.78 .97 .80 .80 4.78 .50 4.78 .25 .25 B B .80 .80 .80 .25 ALTERNATIVE Alternate Bottom ALTERNATIVE .50 4.78 .50 .80 .50 .50 .50 .80 .25 .25 4.78 4.78 .80 .80 4.78 .25 4.78 4.78 2.78 4.78 A .97 4.78 2.78 .97 .97 4.78 4.78 ALL DIMENSIONS ARE . ALL DIMENSIONS ARE .13MM UN 4.78 RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 6 UNLESS OTHERWISE SP UNLESS OTHERWISEDIMENSIONS SPECIFIED ARE DIMENSIONS ARE IN AND AFTER MILLIMETERS MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPE TOLERANCE UNLESS SPECIFIED: .XX .XX .25 .XXX .XXX .125 X THIRD ANGLE PROJECTION X .5 FOR SHEET METAL PAR THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY .X 1.5 .XX registered trademarks and the Cree logo is.Xa .XX .75 .XXX .XXX .25 X X .5 SURFACE FINISH: 1.6 SURFACE FINISH: RECOMMENDED STENCIL PATTERN Recommended Stencil Pattern RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) (HATCHED AREA IS OPENING) (Shaded Area is Open) .97 Recommended PCB Solder Pad 4.78 .25 .25 .25 A PRIMARY .80 2.80 PRIMARY PRIMARY .50 2.78 2.80 .50 4.78 Bottom View .50 4.70 .25 4.70 REF. REF. .25 4.78 4.78 2.80 4.7 Cathode Side .50.80 4.70 R2.26 4.78 4.70 REF. Anode Side C C .50 0.73 PRIMARY 4.78 .50 0.73 2.80 Side View 4.70 REV REV 3.02 OPTICAL REFERENCE Top View 4.70 3 3 4.70 5.00 5.00 .50 .45 4 4 3.02 D 3.70 3.70 5 5 4 4 3 3 26 XLamp (R) MHB-A LED Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm [in]. CATHODE SIDE ANODE SIDE 6 5 4 3 2 1 2400-00009 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. INDEX QTY ITEM COMMENTS 1 2 1 2 2400-00009-CORE 2400-00009-REEL D D 12.4 +.2 .0 MEASURED AT HUB C 330 +.25 -.75 C 16.4 +0.2 .0 MEASURED AT HUB 1.9.4 21 .4 13.1 .2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60 60 REVISONS REV DESCRIPTION DRAWN BY A BY DATE APP'D Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. UNLESS OTHERWISE SPECIFIED THIRD ANGLE PROJECTION DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .01 .XXX .005 X .5 FOR SHEET METAL PARTS ONLY D. CRONIN CHECK DATE 4600 Silicon Drive Durham, N.C 27703 09/29/09 27 DATE -APPROVED -MATERIAL Phone (919) 313-5300 -- Fax (919) 313-5558 DATE -- TITLE REEL, 13" X 12MM, 3 PIECE SNAP A XLamp (R) MHB-A LED Packaging Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright (c) 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), XLamp(R) and EasyWhite(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: MHBAWT-0000-000F0HD240H MHBAWT-0000-000F0HC427G MHBAWT-0000-000N0BD457E MHBAWT-0000000C0HC435H MHBAWT-0000-000F0BD457E MHBAWT-0000-000N0HC465E MHBAWT-0000-000N0UC257E MHBAWT-0000-000N0UB240H MHBAWT-0000-000C0UA427H MHBAWT-0000-000C0HC230G MHBAWT-0000000N0BD440E MHBAWT-0000-000F0BD465E MHBAWT-0000-000C0BD465E MHBAWT-0000-000F0HC227E MHBAWT-0000-000N0HC427H MHBAWT-0000-000F0BD450E MHBAWT-0000-000F0UC265E MHBAWT-0000000F0HD240G MHBAWT-0000-000N0HD235H MHBAWT-0000-000C0HD235G MHBAWT-0000-000C0HC430H MHBAWT-0000-000F0UC250G MHBAWT-0000-000F0UC250E MHBAWT-0000-000F0BD257E MHBAWT-0000000C0UC265E MHBAWT-0000-000N0HD250E MHBAWT-0000-000F0HC227H MHBAWT-0000-000C0UB440H MHBAWT-0000-000F0BC440E MHBAWT-0000-000F0UB450G MHBAWT-0000-000F0BD440E MHBAWT-0000000N0HC435G MHBAWT-0000-000N0BD250E MHBAWT-0000-000F0UA430G MHBAWT-0000-000C0BC440E MHBAWT-0000-000F0UB457E MHBAWT-0000-000C0UA230H MHBAWT-0000-000C0HC227G MHBAWT-0000000N0HC430G MHBAWT-0000-000N0HD265E MHBAWT-0000-000F0HD265E MHBAWT-0000-000N0BD257E MHBAWT-0000-000C0UA227H MHBAWT-0000-000C0HC450G MHBAWT-0000-000F0HC435H MHBAWT-0000000N0UB450E MHBAWT-0000-000F0HC440G MHBAWT-0000-000C0UB465E MHBAWT-0000-000C0HD250E MHBAWT-0000-000N0UB440G MHBAWT-0000-000C0BD250E MHBAWT-0000-000C0UB457E MHBAWT-0000000F0BD250E MHBAWT-0000-000C0BD257E MHBAWT-0000-000C0HC440G MHBAWT-0000-000F0UB240G MHBAWT-0000-000N0HC435H MHBAWT-0000-000F0HC435G MHBAWT-0000-000C0HD240H MHBAWT-0000000C0BD440E MHBAWT-0000-000N0HC235H MHBAWT-0000-000N0UA430G MHBAWT-0000-000F0HD235E MHBAWT-0000-000F0HD235G MHBAWT-0000-000N0UA235G MHBAWT-0000-000N0HC440H MHBAWT-0000000N0HC240H MHBAWT-0000-000N0UA435H MHBAWT-0000-000F0HC440H MHBAWT-0000-000N0HC457E MHBAWT-0000-000C0UA235G MHBAWT-0000-000F0HD240E MHBAWT-0000-000N0UA435G MHBAWT-0000000C0HC435G MHBAWT-0000-000N0UB465E MHBAWT-0000-000F0UA235G MHBAWT-0000-000N0BD450E MHBAWT-0000-000F0HC427H MHBAWT-0000-000F0UA435G MHBAWT-0000-000C0UA430H MHBAWT-0000000F0UA427H MHBAWT-0000-000F0UA230G MHBAWT-0000-000F0UB240F MHBAWT-0000-000C0HC427G MHBAWT-0000-000N0BD265E MHBAWT-0000-000N0UA227H MHBAWT-0000-000F0UB440H MHBAWT-0000000F0HC435E MHBAWT-0000-000N0BC440E MHBAWT-0000-000C0HC430G MHBAWT-0000-000C0HD250G MHBAWT-0000-000C0HC427H MHBAWT-0000-000N0HC427G MHBAWT-0000-000C0UC250E MHBAWT-0000000C0UA235H MHBAWT-0000-000C0BD265E MHBAWT-0000-000F0UB240H MHBAWT-0000-000F0BD265E MHBAWT-0000-000F0UB240E MHBAWT-0000-000F0HC430E