MCC TM Micro Commercial Components Features * * * * * * * RMB2S THRU RMB6S omponents 20736 Marilla Street Chatsworth !"# $ % !"# Surface Mount Package Glass Passivated Diode Construction Fast Recovery, Low Switching Loss Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 1/2 Amp Fast Recovery Glass Passivated Bridge Rectifier 200 to 600 Volts Maximum Ratings * * MBS-1 Operating Temperature: -55 to +150 Storage Temperature: -55 to +150 Maximum Maximum MCC Recurrent Device RMS Part Marking Peak Reverse Voltage Number Voltage RMB2S RB2S 200V 140V RMB4S RB4S 400V 280V RMB6S RB6S 600V 420V Maximum DC Blocking Voltage 200V 400V 600V Typical Thermal Resistance Per Leg Typical Junction Capacitance Maximum Reverse Recovery Time 0.5A (2) 0.8A IFSM 30A F A TA = 30 K 8.3ms, half sine M VF 1.25V IFM = 0.4A; TA = 25 J G H IR 5.0A 100A RJA RJA RJL 85/W(1) 70/W(2) 20/W(1) CJ 13pF trr 150ns 250ns RMB2S-RMB4S RMB6S Rating For Fusing + C (1) IF(AV) D B E Electrical Characteristics @ 25 Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage - 2 It 2 5.0A s N TA = 25 TA = 125 PC board with 12mm2 copper pads Measured at 1.0MHz, VR=4.0V IF=0.5A, IR=1.0A, Irr=0.25A t<8.30ms (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05"(1.3 x 1.3mm) pads C D K M N .252 .150 .179 .019 .090 .004 .027 .058 .195 .039 .008 INCHES .272 6 .165 .195 .031 .106 .008 .043 .062 .205 .049 .014 MM 6.40 3.80 4.55 0.50 2.30 0.10 0.70 1.47 4.95 0.99 0.15 6.90 2.70 4.20 4.95 0.80 2.70 0.20 1.10 1.57 5.21 1.24 0.35 (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8"(20 x 20mm) mounted on 0.05 x 0.05"(1.3x 1.3mm) solder pad Notes:1.High Temperature Solder Exemption Applied,see EU Directive Annex Notes 7. www.mccsemi.com Revision: C 1 of 3 2013/01/01 MCC RMB2S thru RMB6S TM Micro Commercial Components Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 35 0.8 Peak Forward Surge Current (A) Average Forward Rectified Current (A) Fig. 1 - Maximum Forward Current Derating Curve 0.7 Aluminum Substrate 0.6 0.5 0.4 Glass Epoxy P.C.B. 0.3 0.2 0.1 25 20 f = 60Hz f = 50Hz 15 10 5.0 1.0 Cycle Resistive or Inductive Load 0 0 0 20 40 80 60 100 120 140 1 160 100 10 Ambient Temperature (C) Number of Cycles Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics Per Leg 100 Instantaneous Reverse Leakage Current (A) 10 Instantaneous Forward Current (A) TA = 40C Single Half Sine-Wave (JEDEC Method) 30 Pulse Width = 300 s 1% Duty Cycle TJ = 125C 10 1 TJ = 150C TJ = 25C 0.1 1 0.1 TJ = 25C 0.01 0.01 0.2 0.4 0.6 0.8 1.2 1.0 0 1.4 Instantaneous Forward Voltage (V) 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Junction Capacitance Junction Capacitance (pF) 30 TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 25 20 15 10 5.0 0 0.1 1 10 100 200 Reverse Voltage (V) www.mccsemi.com Revision: C 2 of 3 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 3 of 3 2013/01/01