To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
1988, 2010
DATA SHEET
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
PHOTOCOUPLER
PS2501-1,-4,PS2501L-1,-4
HIGH ISOLATION VOLTAGE
SINGLE TRANSISTOR TYPE
MULTI PHOTOCOUPLER SERIES −NEPOC Series−
Document No. PN10225EJ05V0DS (5th edition)
Date Published February 2010 NS
Printed in Japan
PS2501-1, PS2501L-1
1. Anode
2. Cathode
3. Emitter
4. Collector
12
43
PS2501-4, PS2501L-4
12345678
16 15 14 13 12 11 10 9
1, 3, 5, 7. Anode
2, 4, 6, 8. Cathode
9, 11, 13, 15. Emitter
10, 12, 14, 16. Collector
(Top View)
PIN CONNECTION
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS2501-1, -4 and PS2501L-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an
NPN silicon phototransistor.
The PS2501-1, -4 are in a plastic DIP (Dual In-line Package) and the PS2501L-1, -4 are lead bending type (Gull-
wing) for surface mount.
FEATURES
• High isolation voltage (BV = 5 000 Vr.m.s.)
• High collector to emitter voltage (VCEO = 80 V)
• High-speed switching (tr = 3
μ
s TYP., tf = 5
μ
s TYP.)
• Ordering number of tape product: PS2501L-1-F3: 2 000 pcs/reel
• Safety standards
• UL approved: No. E72422
APPLICATIONS
• Power supply
• Telephone/FAX.
• FA/OA equipment
• Programmable logic controller
Data Sheet PN10225EJ05V0DS
2
PS2501-1,-4,PS2501L-1,-4
PACKAGE DIMENSIONS (UNIT : mm)
DIP Type
PS2501-4
PS2501-1
19.8±0.5
6.5±0.5
3.5±0.3
4.15±0.43.2±0.4
2.54
1.25±0.15 0.50±0.10
0.25
M
0 to 15°
7.62
0.25
+0.1
–0.05
3.5±0.3
4.15±0.43.2±0.4
2.54
1.25±0.15
0.50±0.10
0.25
M
4.6±0.35
6.5±0.5
0 to 15°
7.62
0.25
+0.1
–0.05
12
43
18
16 9
Lead Bending Type
PS2501L-4
PS2501L-1
0.25
M
4.6±0.35
6.5±0.5
3.5±0.3
2.54
1.25±0.15
0.15
0.9±0.25
9.60±0.4
0.25
+0.1
–0.05
0.1
+0.1
–0.05
19.8±0.5
6.5±0.5
2.54
1.25±0.15
0.25
M
3.5±0.3
0.15
0.9±0.25
9.60±0.4
0.25
+0.1
–0.05
0.1
+0.1
–0.05
12
43
18
16 9
PHOTOCOUPLER CONSTRUCTION
Parameter Unit (MIN.)
Air Distance 7 mm
Outer Creepage Distance 7 mm
Inner Creepage Distance 3.5 mm
Isolation Distance 0.3 mm
<R>
Data Sheet PN10225EJ05V0DS 3
PS2501-1,-4,PS2501L-1,-4
MARKING EXAMPLE
2501
MJ031
PS2501-4
NJ031
PS2501-1 PS2501-4
Assembly Lot
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
CTR Rank Code
No. 1 pin
Mark
No. 1 pin
Mark
N
J
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
CTR Rank Code
Package
New PKG
Made in Japan
031
M031
Country Assembled
Type Number
Assembly Lot
JJ
J
Package
New PKG
Made in Japan Made in Taiwan
K
R
New PKG
Pb-Free
Pb-Free and
Halogen Free
*1
Y
*1 Special version
<R>
Data Sheet PN10225EJ05V0DS
4
PS2501-1,-4,PS2501L-1,-4
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification
Packing Style Safety Standard
Approval
Application Part
Number *1
PS2501-1 PS2501-1-A Pb-Free Magazine case 100 pcs Standard products PS2501-1
PS2501L-1 PS2501L-1-A (UL approved)
PS2501L-1-F3 PS2501L-1-F3-A Embossed Tape 2 000 pcs/reel
PS2501-4 PS2501-4-A Magazine case 20 pcs PS2501-4
PS2501L-4 PS2501L-4-A
PS2501-1 PS2501-1Y-A Special version Magazine case 100 pcs Standard products PS2501-1
PS2501L-1 PS2501L-1Y-A (Pb-Free and (UL approved)
PS2501L-1-F3 PS2501L-1Y-F3-A Halogen Free) Embossed Tape 2 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
<R>
Data Sheet PN10225EJ05V0DS 5
PS2501-1,-4,PS2501L-1,-4
ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25°C)
Ratings
Parameter Symbol PS2501-1,
PS2501L-1
PS2501-4,
PS2501L-4
Unit
Diode Reverse Voltage VR 6 V
Forward Current (DC) IF 80 mA/ch
Power Dissipation Derating
Δ
PD/°C 1.5 1.2 mW/°C
Power Dissipation PD 150 120 mW/ch
Peak Forward Current*1 IFP 1 A/ch
Transistor Collector to Emitter Voltage VCEO 80 V
Emitter to Collector Voltage VECO 7 V
Collector Current IC 50 mA/ch
Power Dissipation Derating
Δ
PC/°C 1.5 1.2 mW/°C
Power Dissipation PC 150 120 mW/ch
Isolation Voltage*2 BV 5 000 Vr.m.s.
Operating Ambient Temperature TA −55 to +100 °C
Storage Temperature Tstg −55 to +150 °C
*1 PW = 100
μ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together (PS2501-1, PS2501L-1).
Pins 1-8 shorted together, 9-16 shorted together (PS2501-4, PS2501L-4).
Data Sheet PN10225EJ05V0DS
6
PS2501-1,-4,PS2501L-1,-4
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.17 1.4 V
Reverse Current IR VR = 5 V 5
μ
A
Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 50 pF
Transistor Collector to Emitter Dark
Current
ICEO VCE = 80 V, IF = 0 mA 100 nA
Coupled Current Transfer Ratio
(IC/IF)*1
CTR IF = 5 mA, VCE = 5 V 80 300 600 %
Collector Saturation
Voltage
VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF
Rise Time*2 tr VCC = 10 V, IC = 2 mA, RL = 100 Ω 3
μ
s
Fall Time*2 tf 5
*1 CTR rank ( * : only PS2501-1, PS2501L-1)
K* : 300 to 600 (%)
L* : 200 to 400 (%)
M* : 80 to 240 (%)
D* : 100 to 300 (%)
H* : 80 to 160 (%)
W* : 130 to 260 (%)
Q* : 100 to 200 (%)
N : 80 to 600 (%)
*2 Test circuit for switching time
PW = 100 s
Duty Cycle = 1/10
μ
Pulse Input V
CC
V
OUT
R
L
= 100 Ω
50 Ω
I
F
Input
Output
90%
10%
t
r
t
d
t
f
t
s
t
on
t
off
<R>
Data Sheet PN10225EJ05V0DS 7
PS2501-1,-4,PS2501L-1,-4
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25°C)
150
100
50
0255075
100 125 150
1.5 mW/°C
1.2 mW/°C
150
100
50
25 50 100 125 1500
10 000
100
1 000
100
10
1
7550250–25–50
V
CE
= 80 V
10
1.0
0.80.60.40.20
5
1
0.5
0.1
10 mA
40
1.5 mW/°C
1.2 mW/°C
20 mA
50 mA
2 mA
I
F
= 1 mA
5 mA
40 V
24 V
10 V
5 V
PS2501-1
PS2501L-1
PS2501-4
PS2501L-4
PS2501-1
PS2501L-1
PS2501-4
PS2501L-4
100
1.51.41.31.21.11.00.90.80.7
50
10
5
1
0.5
0.1
+60°C
+25°C
T
A
= +100°C
Diode Power Dissipation P
D
(mW)
Transistor Power Dissipation P
C
(mW)
Ambient Temperature T
A
(°C)
Forward Current I
F
(mA)
Forward Voltage V
F
(V)
Collector to Emitter Dark Current I
CEO
(nA)
Collector Saturation Voltage V
CE (sat)
(V)
Ambient Temperature T
A
(°C)
Ambient Temperature T
A
(°C)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
Collector Current I
C
(mA)
75
70
2
60
50
40
30
20
10
046810
20 mA
I
F
= 5 mA
10 mA
50 mA
Collector Current I
C
(mA)
Collector to Emitter Voltage V
CE
(V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
0°C
–25°C
–50°C
Remark The graphs indicate nominal characteristics.
Data Sheet PN10225EJ05V0DS
8
PS2501-1,-4,PS2501L-1,-4
1.2
–50
1.0
0.8
0.6
0.4
0.2
0–25 0 25 50 75 100
50
10
1
0.1 10 k
5 k
1 k
5001005010
1 000
100
10
1100 k50 k10 k5 k1 k500100
0
–5
–10
–15
–20
0.5 1 2 5 10 20 50 100 200 500
IC = 2 mA,
VCC = 10 V,
CTR = 290%
tf
tr
td
ts
I
F
= 5 mA,
V
CC
= 5 V,
CTR = 290%
t
s
t
d
t
r
t
f
IF = 5 mA,
VCE = 5 V
100 Ω
300 Ω
RL = 1 kΩ
Normalized to 1.0
at TA = 25°C,
IF = 5 mA, VCE = 5 V
Forward Current IF (mA)
Ambient Temperature TA (°C)
Load Resistance RL (Ω)
Frequency f (kHz)
Normalized Current Transfer Ratio CTR
Current Transfer Ratio CTR (%)
Normalized Gain GV
Load Resistance RL (Ω)
Switching Time t ( s)
μ
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
FREQUENCY RESPONSE
Switching Time t ( s)
μ
450
400
350
300
250
200
150
100
50
00.05 0.1 0.5 1 5 10 50
TA = 25°C
TA = 60°C
1.2
1.0
0.8
0.6
0.4
0.2
0102103104105
Time (Hr)
CTR (Relative Value)
LONG TERM CTR DEGRADATION
IF = 5 mA
Sample A
B
C
D
VCE = 5 V
Remark The graphs indicate nominal characteristics.
Data Sheet PN10225EJ05V0DS 9
PS2501-1,-4,PS2501L-1,-4
TAPING SPECIFICATIONS (UNIT : mm)
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
PS2501L-1-F3
1.55±0.1
2.0±0.1
4.0±0.1
1.75±0.1
4.5 MAX.
4.0±0.1
0.4
5.3±0.1
8.0±0.1
7.5±0.1
16.0±0.3
10.3±0.1
1.5
+0.1
–0
φ
Packing: 2 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
100±1.0
2.0±0.5
φ
φ
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
Data Sheet PN10225EJ05V0DS
10
PS2501-1,-4,PS2501L-1,-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220°C
180°C
Package Surface Temperature T (°C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10225EJ05V0DS 11
PS2501-1,-4,PS2501L-1,-4
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10225EJ05V0DS
12
PS2501-1,-4,PS2501L-1,-4
The information in this document is current as of February, 2010. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E0904E
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
PS2501-1,-4,PS2501L-1,-4
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
