.285 7.24
REF
.505 12.83
REF
"A"
"A"
MMSD-05-22-X-XX.XX-S SHOWN
FIG 1
IPD1-XX-D
C
(No OF POS x .100[2.54])
+ .055[1.40] REF
.353 8.97
REF
.250 6.35
REF
.100 2.54
REF
01
10
05
06
(SEE NOTE 11)
XX.XX
SECTION "A"-"A"
DWLX-02-XXXX-S-XX.XX-XX-XX
C
MMSDX-XX-XXX-X-XX.XX-X-X-XXX
No OF POSITIONS
-02 THRU -25
(PER ROW)
PLATING SPECIFICATION
-F: FLASH SELECTIVE (USE C-179-XX-F)
-L: LIGHT SELECTIVE (USE C-179-XX-L)
-S: SELECTIVE (USE C-179-XX-S)
WIRE GAUGE (AWG)
PVC: -20, -22, -24, -26, -28, -30
FEP
: -20,-24-28-30
-M: METAL LATCH (USE IPD1-XX-D-X-M)
(LEAVE BLANK FOR PLASTIC)
DOUBLE
-LUS: PLASTIC LATCH UP, STRAIGHT
-LDS: PLASTIC LATCH DOWN, STRAIGHT
-LUX: PLASTIC LATCH UP, CROSSED
-LDX: PLASTIC LATCH DOWN, CROSSED
-MUS: METAL LATCH UP, STRAIGHT
-MDS: METAL LATCH DOWN, STRAIGHT
-MUX: METAL LATCH UP, CROSSED
-MDX: METAL LATCH DOWN, CROSSED
OPTION
SINGLE
SPECIFY IN INCHES [USE DWC-XX-XX]
(SINGLE END: 03.00 INCH MINIMUM,
DOUBLE END: 03.25 INCH MINIMUM)
ASSEMBLED LENGTH
(-P, -K, OR -G OPTION IS REQUIRED.)
-P: POLARIZATION (SEE FIG 3, SHEET 2)
(NOT AVAILABLE WITH -LUS, -LDS, -LUX, -K, -G OPTIONS)
-K: KEYED POLARIZATION
(USE IPD1-XX-D-K) (SEE FIG 4, SHEET 2)
(NOT AVAILABLE WITH -P, -G OPTIONS)
-G: GUIDE POST
(USE IPD1-XX-D-GP) (SEE FIG 6, SHEET 3)
(NOT AVAILABLE WITH -LDS, -LUX, -P, -K OPTIONS)
(LEAVE BLANK FOR NO POLARIZATION;
AVAILABLE TO EXISTING CUSTOMERS ONLY)
POLARIZATION OPTION
END OPTION
-S: SINGLE END
-D: DOUBLE END
(MUST CHOOSE FROM
LUS, LDS, LUX, LDX, MUS,
MDS, MUX, OR MDX)
C (SEE TABLE 3, SHEET 3)
(LEAVE BLANK FOR STANDARD
BLACK CABLE)
(NOT AVAILABLE WITH FEP OPTION)
COLOR CODE
FEP CABLE OPTION
-T: FEP INSULATION
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
(SEE NOTE 11)
XX.XX
FIG. 2
MMSD-05-22-X-XX.XX-D SHOWN
C
DWLX-02-XXXX-D-XX.XX-XX-XX
C
C
C
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
BY:
MMSDX-XX-XXX-X-XX.XX-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
07/16/2004
3
1
SHEET SCALE: 1:0.666667
HOUSING: NYLON 66, COLOR: WHITE
CONTACT: PHOS BRONZE
CABLE; INSULATION: SEE CALLOUT
WIRE: TINNED COPPER
LATCH: NICKEL-PLATED BeCu, #25, 1/2 HT
C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .003[.08] MAX.
3. PARTS TO BE MOLDED TO POSITION.
4. MINIMUM PIN PULLOUT FORCE: 4.000LB[17.79N]
5. CONTACT MUST BE INSERTED UNTIL RETENTION
FEATURE LOCKS INTO PLACE.
6. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING HI-POT TEST
@ 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY
WITH 1 LABEL-ET.
7. TINNED COPPER WIRE IS ROHS COMPLIANT.
8. PARTS ARE TO BE LAYER PACKAGED.
9. MINIMUM METAL LATCH RETENTION FORCE: 1.000LB[4.45N]
10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP
DIMENSIONS, TOLERANCES, AND TOOLING.
11. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL
BE ±.125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE ±2%.
12. LOCATION OF GATE PAD IS AT THE DISCRETION OF THE VENDOR.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AE
-LUS
[LATCH UP - CABLE STRAIGHT]
LATCH-
END 1
LATCH-
END 2
-LDS
[LATCH DOWN - CABLE STRAIGHT]
LATCH-
END 1
LATCH-
END 2
-LUX
[LATCH UP - CABLE CROSSED]
LATCH-
END 1
LATCH-
END 2
-LDX
[LATCH DOWN - CABLE CROSSED]
LATCH-
END 1
LATCH-
END 2
IPD1-XX-D-P
0102
07
(NOT AVAILABLE WITH
-LUS, -LDS, -LUX OPTIONS
)
-P: POLARIZATION
FIG 3
(MMSDX-06-XX-X-XX.XX-X-P SHOWN)
.022
REF
0.56
FIG 4
(MMSDX-06-XX-X-XX.XX-X-K-XXX SHOWN)
(NOT AVAILABLE WITH -P OPTION)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
-K: KEYED POLARIZATION
IPD1-XX-D-K
-02 POS
(DIFFERENT AS SHOWN)
N
N/2
01
N/2 + 1
(SEE TABLE 2)
N/2 + 1
01
N/2
N
(SEE TABLE 2)
N/2 + 1
01
N/2
N
(SEE TABLE 2)
N
N/2
01
N/2 + 1
(SEE TABLE 2)
N/2 + 1
01
N/2
N
(SEE TABLE 2)
N
N/2
01
N/2 + 1
(SEE TABLE 2)
N/2
N
N/2 + 1
01
(SEE TABLE 2)
01
N/2 + 1
N/2
N
(SEE TABLE 2)
IPD1-02-D-K
(SEE SHEET 3, TABLE 4 FOR PIN MAPPING) (SEE SHEET 3, TABLE 4 FOR PIN MAPPING)
(SEE SHEET 3, TABLE 4 FOR PIN MAPPING) (SEE SHEET 3, TABLE 4 FOR PIN MAPPING)
SHEET OF
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
BY:
MMSDX-XX-XXX-X-XX.XX-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
07/16/2004
3
2
SHEET SCALE: 1.25:1
REVISION AE
C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.618 15.70
REF
FIG 5
(MMSDX-06-XX-X-XX.XX-S-M SHOWN)
(SAME AS FIG 1, UNLESS OTHER WISE STATED)
IPD1-XX-D-X-R
LTC-14-01-N
C
.109
-
.002
+
.003 2.77
-
0.05
+
0.08
.260
-
.005
+
.010 6.60
-
0.13
+
0.25
C
C
.310 7.87
REF
IPD1-XX-D-GP
FIG 6
(MMSDX-06-XX-X-XX.XX-S-G SHOWN)
(NOT AVAILABLE WITH -LDS, -LUX, -P, -K OPTIONS)
(SAME AS FIG 1, UNLESS OTHER WISE STATED)
SHEET OF
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
BY:
MMSDX-XX-XXX-X-XX.XX-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
07/16/2004
3
3
SHEET SCALE: 2:1
REVISION AE
C:\EnterpriseVault\dwg\MISC\Mktg\MMSDX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
