Solderless terminals SPADE TONGUE (A type) Non-insulated od1 B d2 File No.: E42024 Stud size Applicable Wire AWG#(mm2) American Metric 26 to 22 (0.2 to 0.5) 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) Part No. Standard d2 E oD o d1 T Actual Refer to page 145 for actual size of the terminal. (except for 1.25-2A) LR20812 F L oD Brazed seam Dimensions mm (in.) L F 1-2 2 0.5-2A 2.2 (.087) B 4.6 (.181) 12.8 (.504) 4.5 (.177) 3-4 3 0.5-3A 3.2 (.126) 5.0 (.197) 12.5 (.492) 6.0 (.236) 5-6 3.5 0.5-3.7A 3.7 (.146) 6.4 (.252) 15.0 (.591) 7.7 (.303) 8 4 0.5-4A 4.3 (.169) 7.0 (.276) 16.2 (.638) 6.3 (.248) 1-2 2 1.25-2A 2.2 (.087) 4.6 (.181) 14.6 (.575) 4.3 (.169) 3-4 3 1.25-C3A 3.2 (.126) 5.6 (.221) 15.8 (.622) 6.3 (.248) 3-4 3 1.25-B3A 3.2 (.126) 5.8 (.228) 15.8 (.622) 6.3 (.248) 3-4 3 1.25-M3A 3.2 (.126) 6.35 (.250) 16.0 (.630) 8.0 (.315) 5-6 3.5 1.25-C3.5A 3.7 (.146) 5.6 (.221) 15.8 (.622) 6.3 (.248) 5-6 3.5 1.25-B3.5A 3.7 (.146) 5.8 (.228) 15.8 (.622) 6.3 (.248) 5-6 3.5 1.25-N3A 3.7 (.146) 6.2 (.244) 15.8 (.622) 6.3 (.248) 5-6 3.5 1.25-YS3A 3.7 (.146) 6.4 (.252) 15.4 (.606) 6.3 (.248) 5-6 3.5 1.25-S3A 3.7 (.146) 7.2 (.283) 15.8 (.622) 6.3 (.248) 5-6 3.5 1.25-P3A 3.7 (.146) 7.5 (.295) 13.8 (.543) 5.5 (.217) 8 4 1.25-YS4A 4.3 (.169) 6.4 (.252) 15.4 (.606) 6.3 (.248) 8 4 1.25-S4A 4.3 (.169) 7.2 (.283) 15.8 (.622) 6.3 (.248) 8 4 1.25-4A 4.3 (.169) 8.5 (.335) 15.8 (.622) 7.0 (.276) 10 5 1.25-S5A 5.3 (.209) 7.2 (.283) 15.8 (.622) 6.3 (.248) 10 5 1.25-M5A 5.3 (.209) 8.5 (.335) 15.8 (.622) 7.0 (.276) 10 5 1.25-5A 5.3 (.209) 9.5 (.374) 15.8 (.622) 7.0 (.276) 1/4 6 1.25-6A 6.4 (.252) 12.0 (.472) 22.0 (.866) 11.0 (.433) 3-4 3 2-N3A 3.2 (.126) 5.9 (.232) 15.8 (.622) 6.3 (.248) 3-4 3 2-M3A 3.2 (.126) 6.0 (.236) 14.5 (.571) 5.0 (.197) 5-6 3.5 2-C3.5A 3.7 (.146) 5.6 (.220) 15.8 (.622) 6.3 (.248) 5-6 3.5 2-YS3A 3.7 (.146) 6.4 (.252) 15.4 (.606) 6.3 (.248) 5-6 3.5 2-S3A 3.7 (.146) 7.2 (.283) 16.0 (.630) 6.5 (.256) 5-6 3.5 2-3A 3.7 (.146) 8.5 (.335) 16.8 (.661) 7.3 (.287) 8 4 2-YS4A 4.3 (.169) 6.4 (.252) 15.4 (.606) 6.3 (.248) 8 4 2-YM4A 4.3 (.169) 6.8 (.268) 15.4 (.606) 6.3 (.248) 8 4 2-S4A 4.3 (.169) 7.2 (.283) 16.0 (.630) 6.5 (.256) 8 4 2-4A 4.3 (.169) 8.5 (.335) 16.8 (.661) 7.3 (.287) 10 5 2-M5A 5.3 (.209) 8.5 (.335) 16.8 (.661) 7.3 (.287) 10 5 2-5A 5.3 (.209) 9.5 (.374) 16.8 (.661) 7.3 (.287) 1/4 6 2-6A 6.4 (.252) 12.0 (.472) 22.0 (.866) 11.0 (.433) 5-6 3.5 5.5-S3A 3.7 (.146) 7.2 (.283) 19.5 (.768) 7.5 (.295) 5-6 3.5 5.5-3A 3.7 (.146) 9.5 (.374) 19.5 (.768) 7.5 (.295) 8 4 5.5-S4A 4.3 (.169) 8.5 (.335) 19.5 (.768) 7.5 (.295) 8 4 5.5-4A 4.3 (.169) 9.5 (.374) 19.5 (.768) 7.5 (.295) 10 5 5.5-5A 5.3 (.209) 9.5 (.374) 19.5 (.768) 7.5 (.295) 1/4 6 5.5-6A 6.4 (.252) 13.5 (.532) 25.5 (1.004) 12.2 (.480) 5/16 8 5.5-8A 8.4 (.331) 13.5 (.532) 25.5 (1.004) 12.2 (.480) Tool No. Qty/box 2.0 1.0 0.5 (.079) (.039) (.020) YHT-2622 YA-1 YA-2 BCT-0514 1,000 4.8 (.189) 3.4 1.7 0.8 (.134) (.067) (.031) YHT-2210 YA-1 YA-2 YA-4 BCT-0514 1,000 4.8 (.189) 4.1 2.3 0.8 (.161) (.091) (.031) YHT-2210 YA-1 YA-2 YA-4 BCT-0514 1,000 6.8 (.268) YHT-2210 YA-1 5.6 3.4 1.0 YA-2 (.220) (.134) (.039) YA-4 BCT-0514 E 4.0 (.157) T 1,000 500 Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. 2-4A ->WS2-4A). 2) Delivery lead times may vary depending on the product. Contact JST for details. 34 Solderless terminals oD B d2 B d2 oD SPADE TONGUE (A type) Vinyl-insulated F L T T F L STRAIGHT File No.: E42024 Stud size Applicable Wire AWG#(mm2) American Metric 3-4 3 26 to 22 (0.2 to 0.5) 5-6 3.5 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) Part No. Straight V0.5-3A Flared FV0.5-3A V0.5-3.7A Standard Dimensions mm (in.) F 6.0 (.236) oD Str. Fld. T Color d2 3.2 (.126) B 5.0 (.197) L 16.5 (.650) FV0.5-3.7A 3.7 (.146) 6.4 (.252) 19.0 (.748) 0.5 8.0 1.9 2.9 Yellow 7.7 (.303) (.315) (.075) (.114) (.020) 1-2 2 V1.25-2A FV1.25-2A 2.2 (.087) 4.6 (.181) 18.8 (.740) 4.3 (.169) 3-4 3 V1.25-B3A FV1.25-B3A 3.2 (.126) 5.8 (.228) 20.0 (.787) 6.3 (.248) 5-6 3.5 V1.25-C3.5A - 3.7 (.146) 5.6 (.220) 20.0 (.787) 6.3 (.248) 5-6 3.5 V1.25-N3A FV1.25-N3A 3.7 (.146) 6.2 (.244) 20.0 (.787) 6.3 (.248) 5-6 3.5 V1.25-YS3A FV1.25-YS3A 3.7 (.146) 6.4 (.252) 19.6 (.772) 6.3 (.248) 5-6 3.5 V1.25-S3A FV1.25-S3A 3.7 (.146) 7.2 (.284) 20.0 (.787) 6.3 (.248) 5-6 3.5 V1.25-P3A FV1.25-P3A 3.7 (.146) 7.5 (.295) 18.0 (.709) 5.5 (.217) 8 4 V1.25-YS4A FV1.25-YS4A 4.3 (.169) 6.4 (.252) 19.6 (.772) 9.0 0.8 3.2 4.0 6.3 (.248) (.354) (.126) (.157) (.031) 8 4 V1.25-S4A FV1.25-S4A 4.3 (.169) 7.2 (.284) 20.0 (.787) 6.3 (.248) 8 4 V1.25-4A FV1.25-4A 4.3 (.169) 8.5 (.335) 20.0 (.787) 7.0 (.276) 10 5 V1.25-S5A FV1.25-S5A 5.3 (.209) 7.2 (.284) 20.0 (.787) 6.3 (.248) 10 5 V1.25-M5A FV1.25-M5A 5.3 (.209) 8.5 (.335) 10 5 V1.25-5A FV1.25-5A 5.3 (.209) 9.5 (.374) 1/4 6 V1.25-6A FV1.25-6A 6.4 (.252) 3-4 3 V2-N3A FV2-N3A 3.2 (.126) 5.9 (.232) 20.0 (.787) 6.3 (.248) 3-4 3 V2-M3A FV2-M3A 3.2 (.126) 6.0 (.236) 18.7 (.736) 5.0 (.197) 5-6 3.5 V2-YS3A FV2-YS3A 3.7 (.146) 6.4 (.252) 19.6 (.772) 6.3 (.248) 5-6 3.5 V2-S3A FV2-S3A 3.7 (.146) 7.2 (.284) 20.2 (.795) 6.5 (.256) 5-6 3.5 V2-3A FV2-3A 3.7 (.146) 8.5 (.335) 21.0 (.827) 7.3 (.287) 8 4 V2-YS4A FV2-YS4A 4.3 (.169) 6.4 (.252) 19.6 (.772) 6.3 (.248) 8 4 V2-YM4A FV2-YM4A 4.3 (.169) 6.8 (.268) 19.6 (.772) 0.8 9.0 3.9 4.5 6.3 (.248) (.354) (.154) (.177) (.031) 8 4 V2-S4A FV2-S4A 4.3 (.169) 7.2 (.284) 20.2 (.795) 6.5 (.256) 8 4 V2-4A FV2-4A 4.3 (.169) 8.5 (.335) 21.0 (.827) 7.3 (.287) 10 5 V2-M5A FV2-M5A 5.3 (.209) 8.5 (.335) 21.0 (.827) 7.3 (.287) 10 5 V2-5A FV2-5A 5.3 (.209) 9.5 (.374) 21.0 (.827) 7.3 (.287) 1/4 6 V2-6A FV2-6A 6.4 (.252) 12.0 (.472) 26.2 (1.032) 11.0 (.433) 5-6 3.5 V5.5-S3A FV5.5-S3A 3.7 (.146) 7.2 (.283) 26.2 (1.032) 7.5 (.295) 5-6 3.5 V5.5-3A FV5.5-3A 3.7 (.146) 9.5 (.374) 26.2 (1.032) 7.5 (.295) 8 4 V5.5-S4A FV5.5-S4A 4.3 (.169) 8.5 (.335) 26.2 (1.032) 7.5 (.295) 8 4 V5.5-4A FV5.5-4A 4.3 (.169) 9.5 (.374) 26.2 (1.032) 7.5 (.295) 10 5 V5.5-5A FV5.5-5A 5.3 (.209) 9.5 (.374) 26.2 (1.032) 7.5 (.295) 1/4 6 V5.5-6A FV5.5-6A 6.4 (.252) 13.5 (.532) 32.2 (1.268) 12.2 (.480) 5/16 8 V5.5-8A FV5.5-8A 8.4 (.331) 13.5 (.532) 32.2 (1.268) 12.2 (.480) 20.0 (.787) Tool No. Qty/box YNT-2622 YA-1,YA-2 BCT-0514 1,000 Red YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 Blue YNT-1614 YA-1 1,000 YA-2 YA-4 BCT-0514 7.0 (.276) 20.0 (.787) 7.0 (.276) 12.0 (.472) 26.2 (1.032) 11.0 (.433) Note:1) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 2) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. V2-4A ->VWS2-4A). 3) To order products with nylon insulation, change the "V" in the part number prefix to "N" (ex. V2-4A ->N2-4A). Because nylon absorbs moisture, care must be taken concering storage. 4) Delivery lead times may vary depending on the product. Contact JST for details. 35 FLARED LR20812 13.5 1.0 5.4 6.8 Yellow (.531) (.213) (.268) (.039) YNT-1210S YA-4 BCT-0514 500 Solderless terminals B d2 oD SPADE TONGUE (A type) Vinyl-insulated (funnel-entry) T F L File No.: Applicable Wire AWG#(mm2) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 LR20812 Stud size American 3-4 Metric 3 5-6 3.5 5-6 3.5 5-6 Part No. Standard Dimensions mm (in.) FVX1.25-B3A d2 3.2 (.126) B 5.8 (.228) L 21.8 (.858) F 6.3 (.248) FVX1.25-N3A 3.7 (.146) 6.2 (.244) 21.8 (.858) 6.3 (.248) FVX1.25-YS3A 3.7 (.146) 6.4 (.252) 21.4 (.843) 6.3 (.248) 3.5 FVX1.25-S3A 3.7 (.146) 7.2 (.284) 21.8 (.858) 6.3 (.248) 5-6 3.5 FVX1.25-P3A 3.7 (.146) 7.5 (.295) 21.8 (.858) 5.5 (.217) 8 4 FVX1.25-YS4A 4.3 (.169) 6.4 (.252) 21.4 (.843) 6.3 (.248) 8 4 FVX1.25-S4A 4.3 (.169) 7.2 (.284) 21.8 (.858) 6.3 (.248) 8 4 FVX1.25-4A 4.3 (.169) 8.5 (.335) 21.8 (.858) 7.0 (.276) 10 5 FVX1.25-S5A 5.3 (.209) 7.2 (.284) 21.8 (.858) 6.3 (.248) 10 5 FVX1.25-M5A 5.3 (.209) 8.5 (.335) 21.8 (.858) 7.0 (.276) 10 5 FVX1.25-5A 5.3 (.209) 9.5 (.374) 21.8 (.858) 7.0 (.276) 1/4 6 FVX1.25-6A 6.4 (.252) 12.0 (.472) 28.0 (1.102) 11.0 (.433) 3-4 3 FVX2-N3A 3.2 (.126) 5.9 (.232) 21.8 (.858) 6.3 (.248) 3-4 3 FVX2-M3A 3.2 (.126) 6.0 (.236) 20.5 (.807) 5.0 (.197) 5-6 3.5 FVX2-YS3A 3.7 (.146) 6.4 (.252) 21.4 (.843) 6.3 (.248) 5-6 3.5 FVX2-S3A 3.7 (.146) 7.2 (.284) 23.0 (.906) 6.5 (.256) 5-6 3.5 FVX2-3A 3.7 (.146) 8.5 (.335) 22.8 (.898) 7.3 (.287) 8 4 FVX2-YS4A 4.3 (.169) 6.4 (.252) 21.4 (.843) 6.3 (.248) 8 4 FVX2-YM4A 4.3 (.169) 6.8 (.268) 21.4 (.843) 6.3 (.248) 8 4 FVX2-S4A 4.3 (.169) 7.2 (.284) 23.0 (.906) 6.5 (.256) 8 4 FVX2-4A 4.3 (.169) 8.5 (.335) 22.8 (.898) 7.3 (.287) 10 5 FVX2-M5A 5.3 (.209) 8.5 (.335) 22.8 (.898) 7.3 (.287) 10 5 FVX2-5A 5.3 (.209) 9.5 (.374) 22.8 (.898) 7.3 (.287) 1/4 6 FVX2-6A 6.4 (.252) 12.0 (.472) 28.0 (1.102) 11.0 (.433) 5-6 3.5 FVX5.5-S3A 7.2 (.284) 26.7 (1.051) 7.5 (.295) 5-6 3.5 FVX5.5-3A 3.7 (.146) 9.5 (.374) 26.7 (1.051) 7.5 (.295) 8 4 FVX5.5-S4A 4.3 (.169) 8.5 (.335) 26.7 (1.051) 7.5 (.295) 8 4 FVX5.5-4A 4.3 (.169) 9.5 (.374) 26.7 (1.051) 7.5 (.295) 3.7 (.146) 10 5 FVX5.5-5A 5.3 (.209) 9.5 (.374) 26.7 (1.051) 7.5 (.295) 1/4 6 FVX5.5-6A 6.4 (.252) 13.5 (.532) 32.7 (1.287) 12.2 (.480) 5/16 8 FVX5.5-8A 8.4 (.331) 13.5 (.532) 32.7 (1.287) 12.2 (.480) oD T 0.8 10.8 4.0 (.425) (.157) (.031) Color Red Tool No. Qty/box YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 BCT-0514 0.8 10.8 4.6 (.425) (.181) (.031) Blue YNT-1614 YA-1 1,000 YA-2 YA-4 BCT-0514 500 1.0 14.0 6.8 Yellow (.551) (.268) (.039) YNT-1210S YA-4 BCT-0514 500 250 Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FVX2-4A ->FVXWS2-4A). 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) Delivery lead times may vary depending on the product. Contact JST for details. 36 Solderless terminals B d2 oD SPADE TONGUE (A type) Vinyl-insulated (funnel-entry) T F L File No.: Applicable Wire AWG#(mm2) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 LR20812 Stud size American 1-2 Metric 2 3-4 3 5-6 3.5 5-6 Part No. Standard Dimensions mm (in.) FVL1.25-2A d2 2.2 (.087) B 4.6 (.181) L 19.2 (.756) F 4.3 (.169) FVL1.25-B3A 3.2 (.126) 5.8 (.228) 20.4 (.803) 6.3 (.248) FVL1.25-N3A 3.7 (.146) 6.2 (.244) 20.4 (.803) 6.3 (.248) 3.5 FVL1.25-YS3A 3.7 (.146) 6.4 (.252) 20.0 (.787) 6.3 (.248) 5-6 3.5 FVL1.25-S3A 3.7 (.146) 7.2 (.284) 20.4 (.803) 6.3 (.248) 5-6 3.5 FVL1.25-P3A 3.7 (.146) 7.5 (.295) 18.4 (.724) 5.5 (.217) 8 4 FVL1.25-YS4A 4.3 (.169) 6.4 (.252) 20.0 (.787) 6.3 (.248) 8 4 FVL1.25-S4A 4.3 (.169) 7.2 (.284) 20.4 (.803) 6.3 (.248) 8 4 FVL1.25-4A 4.3 (.169) 8.5 (.335) 20.4 (.803) 7.0 (.276) 10 5 FVL1.25-M5A 5.3 (.209) 8.5 (.335) 20.4 (.803) 7.0 (.276) 10 5 FVL1.25-5A 5.3 (.209) 9.5 (.374) 20.4 (.803) 7.0 (.276) 10 5 FVL1.25-S5A 5.3 (.209) 7.2 (.284) 20.4 (.803) 6.3 (.248) 1/4 6 FVL1.25-6A 6.4 (.252) 12.0 (.472) 26.6 (1.047) 11.0 (.433) 3-4 3 FVL2-N3A 3.2 (.126) 5.9 (.232) 20.4 (.803) 6.3 (.248) 3-4 3 FVL2-M3A 3.2 (.126) 6.0 (.236) 19.1 (.752) 5.0 (.197) 5-6 3.5 FVL2-YS3A 3.7 (.146) 6.4 (.252) 20.0 (.787) 6.3 (.248) 5-6 3.5 FVL2-S3A 3.7 (.146) 7.2 (.284) 20.6 (.811) 6.5 (.256) 5-6 3.5 FVL2-3A 3.7 (.146) 8.5 (.335) 21.4 (.843) 7.3 (.287) 8 4 FVL2-YS4A 4.3 (.169) 6.4 (.252) 20.0 (.787) 6.3 (.248) 8 4 FVL2-YM4A 4.3 (.169) 6.8 (.268) 20.0 (.787) 6.3 (.248) 8 4 FVL2-S4A 4.3 (.169) 7.2 (.284) 20.6 (.811) 6.5 (.256) 8 4 FVL2-4A 4.3 (.169) 8.5 (.335) 21.4 (.843) 7.3 (.287) 10 5 FVL2-M5A 5.3 (.209) 8.5 (.335) 21.4 (.843) 7.3 (.287) 10 5 FVL2-5A 5.3 (.209) 9.5 (.374) 21.4 (.843) 7.3 (.287) 1/4 6 FVL2-6A 6.4 (.252) 12.0 (.472) 26.6 (1.047) 11.0 (.433) 5-6 3.5 FVL5.5-S3A 3.7 (.146) 7.2 (.284) 26.5 (1.043) 7.5 (.295) 5-6 3.5 FVL5.5-3A 3.7 (.146) 9.5 (.374) 26.5 (1.043) 7.5 (.295) 8 4 FVL5.5-S4A 4.3 (.169) 8.5 (.335) 26.5 (1.043) 7.5 (.295) 8 4 FVL5.5-4A 4.3 (.169) 9.5 (.374) 26.5 (1.043) 7.5 (.295) 10 5 FVL5.5-5A 5.3 (.209) 9.5 (.374) 26.5 (1.043) 7.5 (.295) 1/4 6 FVL5.5-6A 6.4 (.252) 13.5 (.532) 32.5 (1.280) 12.2 (.480) 5/16 8 FVL5.5-8A 8.4 (.331) 13.5 (.532) 32.5 (1.280) 12.2 (.480) Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FVL2-4A ->FVLWS2-4A). 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) Delivery lead times may vary depending on the product. Contact JST for details. 37 oD T 0.8 9.4 4.2 (.370) (.165) (.031) 0.8 9.4 4.7 (.370) (.185) (.031) Color Tool No. Qty/box Red YNT-2216 YA-1 YA-2 1,000 YA-4 BCT-0514 Blue YNT-1614 YA-1 1,000 YA-2 YA-4 BCT-0514 1.0 13.8 7.0 Yellow (.543) (.276) (.039) YNT-1210S YA-4 BCT-0514 500 Solderless terminals D B d2 B d2 D SPADE TONGUE (A type) Vinyl-insulated with copper sleeve F L L T T F STRAIGHT File No.: E42024 Stud size Part No. Applicable Wire AWG#(mm2) American Metric Straight Flared VD0.5-3A 3-4 3 - 26 to 22 (0.2 to 0.5) 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) 5-6 3.5 FLARED LR20812 VD0.5-3.7A - Standard Dimensions mm (in.) d2 3.2 (.126) B 5.0 (.197) L 16.5 (.650) F 6.0 (.236) 3.7 (.146) 6.4 (.252) 19.0 (.748) 7.7 (.303) 3-4 3 - FVD0.5-3A 3.2 (.126) 5.0 (.197) 16.8 (.661) 6.0 (.236) 5-6 3.5 - FVD0.5-3.7A 3.7 (.146) 6.4 (.252) 19.3 (.760) 7.7 (.303) 1-2 2 VD1.25-2A FVD1.25-2A 2.2 (.087) 4.6 (.181) 19.4 (.764) 4.3 (.169) 3-4 3 VD1.25-B3A FVD1.25-B3A 3.2 (.126) 5.8 (.228) 20.6 (.811) 6.3 (.248) 5-6 3.5 VD1.25-N3A FVD1.25-N3A 3.7 (.146) 6.2 (.244) 20.6 (.811) 6.3 (.248) 5-6 3.5 3.7 (.146) 6.4 (.252) 20.2 (.795) 6.3 (.248) 5-6 3.5 VD1.25-YS3A FVD1.25-YS3A VD1.25-S3A FVD1.25-S3A 3.7 (.146) 7.2 (.284) 20.6 (.811) 6.3 (.248) 5-6 3.5 VD1.25-P3A 3.7 (.146) 7.5 (.295) 18.6 (.732) 5.5 (.217) 8 4 4.3 (.169) 6.4 (.252) 20.2 (.795) 6.3 (.248) 8 4 VD1.25-YS4A FVD1.25-YS4A VD1.25-S4A FVD1.25-S4A 4.3 (.169) 7.2 (.284) 20.6 (.811) 6.3 (.248) 8 4 VD1.25-4A FVD1.25-4A 4.3 (.169) 8.5 (.335) 20.6 (.811) 7.0 (.276) 10 5 VD1.25-S5A FVD1.25-S5A 5.3 (.209) 7.2 (.284) 20.6 (.811) 6.3 (.248) 10 5 VD1.25-M5A FVD1.25-M5A 5.3 (.209) 8.5 (.335) 20.6 (.811) 7.0 (.276) 10 5 VD1.25-5A FVD1.25-5A 5.3 (.209) 9.5 (.374) 20.6 (.811) 1/4 6 VD1.25-6A FVD1.25-6A 6.4 (.252) 12.0 (.472) 3-4 3 VD2-N3A FVD2-N3A 3.2 (.126) 5.9 (.232) 20.6 (.811) 6.3 (.248) 3-4 3 VD2-M3A FVD2-M3A 3.2 (.126) 6.0 (.236) 19.3 (.760) 5.0 (.197) 5-6 3.5 VD2-YS3A FVD2-YS3A 3.7 (.146) 6.4 (.252) 20.2 (.795) 6.3 (.248) 5-6 3.5 VD2-S3A FVD2-S3A 3.7 (.146) 7.2 (.284) 20.8 (.819) 6.5 (.256) 5-6 3.5 VD2-3A FVD2-3A 3.7 (.146) 8.5 (.335) 21.6 (.850) 7.3 (.287) 8 4 VD2-YS4A FVD2-YS4A 4.3 (.169) 6.4 (.252) 20.2 (.795) 6.3 (.248) 8 4 VD2-YM4A FVD2-YM4A 4.3 (.169) 6.8 (.268) 20.2 (.795) 6.3 (.248) 8 4 VD2-S4A FVD2-S4A 4.3 (.169) 7.2 (.284) 20.8 (.819) 6.5 (.256) 8 4 VD2-4A FVD2-4A 4.3 (.169) 8.5 (.335) 21.6 (.850) 7.3 (.287) 10 5 VD2-M5A FVD2-M5A 5.3 (.209) 8.5 (.335) 21.6 (.850) 7.3 (.287) 10 5 VD2-5A FVD2-5A 5.3 (.209) 9.5 (.374) 21.6 (.850) 7.3 (.287) 1/4 6 VD2-6A FVD2-6A 6.4 (.252) 12.0 (.472) 5-6 3.5 VD5.5-S3A FVD5.5-S3A 3.7 (.146) 7.2 (.283) 26.7(1.051) 7.5 (.295) 5-6 3.5 VD5.5-3A FVD5.5-3A 3.7 (.146) 9.5 (.374) 26.7(1.051) 7.5 (.295) 8 4 VD5.5-S4A FVD5.5-S4A 4.3 (.169) 8.5 (.335) 26.7(1.051) 7.5 (.295) 8 4 VD5.5-4A FVD5.5-4A 4.3 (.169) 9.5 (.374) 26.7(1.051) 7.5 (.295) 10 5 VD5.5-5A FVD5.5-5A 5.3 (.209) 9.5 (.374) 26.7(1.051) 7.5 (.295) 1/4 6 VD5.5-6A FVD5.5-6A 6.4 (.252) 13.5 (.532) 32.7(1.287) 12.2 (.480) 5/16 8 VD5.5-8A FVD5.5-8A 8.4 (.331) 13.5 (.532) 32.7(1.287) 12.2 (.480) FVD1.25-P3A oD Str. Fld. 8.0 (.315) 8.3 (.327) T Color Tool No. Qty/box YNT-2622 0.5 2.2 2.5 Yellow YA-1,YA-2 1,000 (.087) (.098) (.020) BCT-0514 0.8 9.6 3.5 4.0 (.378) (.138) (.157) (.031) Red YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 Blue YNT-1614 YA-1 1,000 YA-2 YA-4 BCT-0514 7.0 (.276) 26.8(1.055) 11.0 (.433) 0.8 9.6 4.1 4.7 (.378) (.161) (.185) (.031) 26.8(1.055) 11.0 (.433) 14.0 1.0 5.7 6.5 Yellow (.551) (.224) (.256) (.039) YNT-1210S YA-4 BCT-0514 500 Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. VD2-4A -->VDWS2-4A). 2) To order products with nylon insulation, change the "V" in the part number prefix to "N" (ex. VD2-4A -->ND2-4A). Because nylon absorbs moisture, care must be taken concering storage. 3) Delivery lead times may vary depending on the product. Contact JST for details. 38