AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
www.amphenol-industrial.com
AC and SAE AS50151
Threaded Standard Cylindrical Connectors
Amphenol®
Table of Contents Page
Amphenol ® AC Series Connectors
Introduction/General Information .............................................................................................................................................................1
AC Threaded Connector Styles
Wall mounting receptacle .....................................................................................................................................................2
Line receptacle .....................................................................................................................................................................3
Box mounting receptacle ......................................................................................................................................................4
Straight plug .........................................................................................................................................................................5
90 degree plug ......................................................................................................................................................................6
AC Series how to order.................................................................................................................................................................59
Amphenol® SAE AS50151 Standard Cylindrical Connectors
General Information, Class Designations.................................................................................................................................................7
MS-A, MS-C General Information...................................................................................................................................................8
MS3100A or C wall mounting receptacle ..............................................................................................................................9
MS3101A inline receptacle .................................................................................................................................................10
MS3102A or C box mounting receptacle .............................................................................................................................11
MS3106A straight plug........................................................................................................................................................12
MS3108A 90 degree plug ...................................................................................................................................................13
MS-E/F General Information ........................................................................................................................................................14
MS3100E/F wall mounting receptacle ................................................................................................................................15
MS3101E/F inline receptacle ..............................................................................................................................................16
MS3102E box mounting receptacle ....................................................................................................................................17
MS3106E/F straight plug ....................................................................................................................................................18
MS3108E 90 degree plug ...................................................................................................................................................19
MS-R General Information ...........................................................................................................................................................20
MS3100R wall mounting receptacle ...................................................................................................................................21
MS3101R inline receptacle .................................................................................................................................................22
MS3102R box mounting receptacle ....................................................................................................................................23
MS3106R straight plug .......................................................................................................................................................24
MS/Standard How to Order ..........................................................................................................................................................60
Amphenol AC Threaded/ SAE AS50151 Insert Arrangements, Contacts and Accessories
AC Series/MS insert availability.............................................................................................................................................. 25-27
AC Series/MS insert alternate positioning ....................................................................................................................................28
AC Series/MS solder contacts ......................................................................................................................................................29
AC Series crimp contacts .............................................................................................................................................................30
RADSOK® technology and crimp socket contacts .................................................................................................................................... 31
AC Series/MS contact arrangements ..................................................................................................................................... 32-53
AC Series thermocouple availability .............................................................................................................................................54
AC Series thermocouple contact arrangements .................................................................................................................. 55 – 58
AC Series/MS accessories – sealing gaskets, sealing plugs, sealing ranges ...............................................................................61
MS3057A cable clamp, MS3420 sleeve .......................................................................................................................................62
Plug protection caps .....................................................................................................................................................................63
Receptacle protection caps ..........................................................................................................................................................64
Dust caps .....................................................................................................................................................................................65
AC Series/MS application tools, torque values .............................................................................................................................66
Reverse Bayonet Coupling 5015 type connectors .................................................................................................................................67
AC Series Threaded Connectors with RADSOK® Contacts ..................................................................................................................68
Amphe-Power® 5015 Connectors (AC threaded series with high amperage RADSOK® contacts),
5015 Connectors with PCB contacts ............................................................................................................................................68
For additional information on AC Series or SAE AS50151 Connectors for
special application requirements, contact your local sales ofce or –
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 888-364-9011 Fax: 520-397-7169
www.amphenol-industrial.com
This catalog can be viewed, printed and saved
from website: www.amphenol-industrial.com.
Ask for the Amphenol Industrial North American Product
Overview for additional connectors offered.
For specic questions about RoHS compliance, consult
Amphenol Industrial Operations, or call the RoHS Product
Compliance and Technical Support line: 1-866-315-8559
Amphenol Industrial is a Certied ISO 9001 Manufacturer.
1
Designed with the industrial user in mind, for widely diverse
applications such as mass transportation, automo tive, heavy
equipment and geophysical industries, and for the entertain-
ment/ lighting industries, the new AC Series of Connectors
offer the following features:
• Rugged aluminum shells
• Durability and reliability
• Environmentally acceptable shell plating options -
• Conductive and non-conductive
• Single key/keyway shell polarization
• Five shell styles in sizes 10SL to 40
• Threaded coupling
• Various backshells
• Resilient inserts -
• Outstanding moisture barrier
• High dielectric strength
• High resistance to vibration
• Over 275 insert patterns available
• Alternate insert positioning
• Machined contacts -
• Maximum corrosion resistance
• Maximum current capacity
• Low millivolt drop
• Solder and crimp contacts - silver plated or
optional gold plating
• General duty and environmental versions
• –55° C to +125° C operating temp. range
• Standard application tools
Amphe-PowerTM Connectors - AC Threaded Connectors with
RADSOK® contacts are also available. These are high amper-
age capability connectors designed for the most demanding
industrial and transportation applications.
• The RADSOK contact will handle 50% to 150%
higher amperages than standard contacts (size dependent).
• Current Amphe-Power lines support from 35A to
500A continuous duty.
• RADSOK contacts are available in size 12 (35 amps),
size 8 (70 amps), size 4 (120 amps), and size 0 (250 amps).
See page 31 for more information.
Note: The previous AC-B Bayonet series is replaced by the newer
ACA-B Reverse Bayonet series. For availability of the AC-B,
consult Amphenol Industrial Operations. For information on ACA-B
Reverse Bayonet series connectors see Amphenol catalog IC-4.
wall mounting receptacle
line receptacle
box mounting receptacle
straight plug
Amphenol® AC Series
industrial application threaded style connector
AC Threaded Series
AC Threaded Connectors with RADSOK® High
Amperage Contacts
RoHS Compliant options available.
2
L
A Thread
XP
B
M
K
L²
A Thread
XP
B
M
K
SR
R
S
T
4 Holes
L¹
A Thread
P¹
PGA
PGR
B
M
K
AC ( )00A*
AC ( )00E*
AC ( )00PG( )*
AC ( )00AF*
AC ( )00F*
AC Threaded
wall mounting receptacle
A B Min K M P1 Hex T Dia X Max
Shell Thread Full +.020 L L1 L2 +.010 P Flats PGA PGR R S +.004 O.D.
Size Class 2A Thread –.010 Max Max Max –.000 Max Ref Ref Ref ±.005 ±.010 –.002 Cable
10SL .6250-24UNEF .391 .672 2.129 3.010 2.189 .562 .894 .750 .150/.320 .070/.240 .719 1.000 .120 .312
12S .7500-20UNEF .450 .672 2.129 3.010 2.261 .562 .894 .750 .150/.320 .070/.240 .812 1.094 .120 .312
12 .7500-20UNEF .625 .860 2.524 3.500 2.644 .750 .894 .750 .150/.320 .070/.240 .812 1.094 .120 .312
14S .8750-20UNEF .450 .672 2.201 3.188 2.261 .562 1.083 .880 .190/.390 .110/.280 .906 1.188 .120 .438
14 .8750-20UNEF .625 .860 2.524 3.641 2.644 .750 1.083 .880 .190/.390 .110/.280 .906 1.188 .120 .438
16S 1.0000-20UNEF .450 .672 2.201 3.265 2.266 .562 1.181 .940 .230/.470 .190/.350 .969 1.281 .120 .531
16 1.0000-20UNEF .625 .860 2.524 3.718 2.644 .750 1.181 .940 .230/.470 .190/.350 .969 1.281 .120 .531
18 1.1250-18UNEF .625 .891 2.596 3.718 2.716 .750 1.300 .940 .230/.470 .190/.350 1.063 1.375 .120 .625
20 1.2500-18UNEF .625 .891 2.654 3.798 2.774 .750 1.487 1.060 .390/.560 .270/.470 1.156 1.500 .120 .750
22 1.3750-18UNEF .625 .891 2.654 4.080 2.916 .750 1.487 1.060 .390/.560 .270/.470 1.250 1.625 .120 .750
24 1.5000-18UNEF .625 .953 2.885 4.142 3.051 .812 1.712 1.060 .390/.560 .270/.470 1.375 1.750 .147 .938
28 1.7500-18UNS .625 .953 2.885 4.291 3.140 .812 1.712 1.300 .510/.710 .350/.630 1.562 2.000 .147 .938
32 2.0000-18UNS .625 1.031 2.943 4.643 3.184 .875 2.063 1.650 .700/.980 .510/.790 1.750 2.250 .173 1.250
36 2.2500-16UN .625 1.031 2.943 4.643 3.245 .875 2.283 1.650 .700/.980 .510/.790 1.938 2.500 .173 1.375
40 2.5000-16UN .625 1.031 3.068 5.635 3.670 .875 2.688 1.650 .700/.980 .510/.790 2.188 2.750 .173 1.625
B Min K M P1 Hex T Dia X Max
Shell Full +.51 L L1 L2 +.25 P Flats PGA PGR R S +.10 O.D.
Size Thread –.25 Max Max Max –.00 Max Ref Ref Ref ±.13 ±.25 –.05 Cable
10SL 9.93 17.07 54.08 76.45 55.60 14.28 22.71 19.05 3.81/8.13 1.78/6.10 18.26 25.40 3.05 7.93
12S 11.43 17.07 54.08 76.45 57.43 14.28 22.71 19.05 3.81/8.13 1.78/6.10 20.63 27.79 3.05 7.93
12 15.88 21.84 64.11 88.90 67.16 19.05 22.71 19.05 3.81/8.13 1.78/6.10 20.63 27.79 3.05 7.93
14S 11.43 17.07 55.91 80.98 57.43 14.28 27.51 22.35 4.83/9.91 2.79/7.11 23.01 30.18 3.05 11.13
14 15.88 21.84 64.11 92.48 67.16 19.05 27.51 22.35 4.83/9.91 2.79/7.11 23.01 30.18 3.05 11.13
16S 11.43 17.07 55.91 82.93 57.56 14.28 30.00 23.88 5.84/11.94 4.83/8.89 24.61 32.54 3.05 13.49
16 15.88 21.84 64.11 94.44 67.16 19.05 30.00 23.88 5.84/11.94 4.83/8.89 24.61 32.54 3.05 13.49
18 15.88 22.63 65.94 94.44 68.99 19.05 33.02 23.88 5.84/11.94 4.83/8.89 27.00 34.93 3.05 15.88
20 15.88 22.63 67.41 96.47 70.46 19.05 37.77 26.92 9.91/14.22 6.86/11.94 29.36 38.10 3.05 19.05
22 15.88 22.63 67.41 103.63 74.07 19.05 37.77 26.92 9.91/14.22 6.86/11.94 31.75 41.28 3.05 19.05
24 15.88 24.21 73.28 105.21 77.50 20.63 43.49 26.92 9.91/14.22 6.86/11.94 34.93 44.45 3.73 23.83
28 15.88 24.21 73.28 108.99 79.76 20.63 43.49 33.02 12.95/18.03 8.89/16.00 39.68 50.80 3.73 23.83
32 15.88 26.19 74.75 117.93 80.87 22.23 52.40 41.91 17.78/24.89 12.95/20.07 44.45 57.15 4.39 31.75
36 15.88 26.19 74.75 117.93 82.42 22.23 57.99 41.91 17.78/24.89 12.95/20.07 49.23 63.50 4.39 34.93
40 15.88 26.19 77.93 143.13 93.22 22.23 68.28 41.91 17.78/24.89 12.95/20.07 55.58 69.85 4.39 41.28
All dimensions for reference only.
* To complete order number, see how to order, page 59. Inches
Millimeters
3
L
A Thread
XP
B
B
L²
A Thread
XP
L¹
A Thread
P¹
PGA
PGR
B
AC ( )01A*
AC ( )01E*
AC ( )01AF*
AC ( )01F*
AC ( )01PG( )*
AC Threaded
line receptacle
A B Min P1 X Max
Shell Thread Full L L1 L2 P HexFlats PGA PGR O.D.
Size Class 2 A Thread Max Max Max Max Ref Ref Ref Cable
10SL .6250-24UNEF .406 2.129 3.010 2.189 .894 .750 .150/.320 .070/.240 .312
12S .7500-20UNEF .422 2.129 3.010 2.261 .894 .750 .150/.320 .070/.240 .312
12 .7500-20UNEF .656 2.524 3.500 2.644 .894 .750 .150/.320 .070/.240 .312
14S .8750-20UNEF .391 2.201 3.188 2.261 1.083 .880 .190/.390 .110/.280 .438
14 .8750-20UNEF .625 2.524 3.641 2.644 1.083 .880 .190/.390 .110/.280 .438
16S 1.0000-20UNEF .391 2.201 3.265 2.266 1.181 .940 .230/.470 .190/.350 .531
16 1.0000-20UNEF .625 2.524 3.718 2.644 1.181 .940 .230/.470 .190/.350 .531
18 1.1250-18UNEF .625 2.596 3.718 2.716 1.300 .940 .230/.470 .190/.350 .625
20 1.2500-18UNEF .625 2.654 3.798 2.774 1.487 1.060 .390/.560 .270/.470 .750
22 1.3750-18UNEF .625 2.654 4.080 2.916 1.487 1.060 .390/.560 .270/.470 .750
24 1.5000-18UNEF .625 2.885 4.142 3.051 1.712 1.060 .390/.560 .270/.470 .938
28 1.7500-18UNS .625 2.885 4.291 3.140 1.712 1.300 .510/.710 .350/.630 .938
32 2.0000-18UNS .625 2.943 4.643 3.184 2.063 1.650 .700/.980 .510/.790 1.250
36 2.2500-16UN .625 2.943 4.643 3.245 2.283 1.650 .700/.980 .510/.790 1.375
40 2.5000-16UN .625 3.068 5.635 3.670 2.688 1.650 .700/.980 .510/.790 1.625
B Min
P1 X Max
Shell Full L L1 L2 P Hex Flats PGA PGR O.D.
Size Thread Max Max Max Max Ref Ref Ref Cable
10SL 10.31 54.08 76.45 55.60 22.71 19.05 3.81/8.13 1.78/6.10 7.93
12S 10.72 54.08 76.45 57.43 22.71 19.05 3.81/8.13 1.78/6.10 7.93
12 16.66 64.11 88.90 67.16 22.71 19.05 3.81/8.13 1.78/6.10 7.93
14S 9.93 55.91 80.98 57.43 27.51 22.35 4.83/9.91 2.79/7.11 11.13
14 15.88 64.11 92.48 67.16 27.51 22.35 4.83/9.91 2.79/7.11 11.13
16S 9.93 55.91 82.93 57.56 30.00 23.88 5.84/11.94 4.83/8.89 13.49
16 15.88 64.11 94.44 67.16 30.00 23.88 5.84/11.94 4.83/8.89 13.49
18 15.88 65.94 94.44 68.99 33.02 23.88 5.84/11.94 4.83/8.89 15.88
20 15.88 67.41 96.47 70.46 37.77 26.92 9.91/14.22 6.86/11.94 19.05
22 15.88 67.41 103.63 74.07 37.77 26.92 9.91/14.22 6.86/11.94 19.05
24 15.88 73.28 105.21 77.50 43.49 26.92 9.91/14.22 6.86/11.94 23.83
28 15.88 73.28 108.99 79.76 43.49 33.02 12.95/18.03 8.89/16.00 23.83
32 15.88 74.75 117.93 80.87 52.40 41.91 17.78/24.89 12.95/20.07 31.75
36 15.88 74.75 117.93 82.42 57.99 41.91 17.78/24.89 12.95/20.07 34.93
40 15.88 77.93 143.13 93.22 68.28 41.91 17.78/24.89 12.95/20.07 41.28
All dimensions for reference only.
* To complete order number, see how to order, page 59. Inches
Millimeters
4
SR
R
S
T
4 Holes
A Thread
P
B
ML
Z
K
AC ( )02A*
AC ( )02E*
AC Threaded
box mounting receptacle
A B Min K L M P Dia T Dia
Shell Thread Full +.020 +.000 +.010 +.010 R S +.004 Z
Size Class 2 A Thread –.010 –.010 –.000 –.000 ±.005 ±.031 –.002 Max**
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .519
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .519
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .519
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .519
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .722
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .519
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .722
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .519
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .722
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .691
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .691
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .691
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .628
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .628
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .550
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .550
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .550
B Min K L M P Dia T Dia
Shell Full +.51 +.00 +.25 +.25 R S +.10 Z
Size Thread –.25 –.25 –.00 –.00 ±.13 ±.79 –.05 Max**
8S 9.93 17.07 7.54 14.28 9.53 15.09 22.23 3.05 13.18
10S 9.93 17.07 7.54 14.28 12.70 18.26 25.40 3.05 13.18
10SL 9.93 17.07 7.54 14.28 15.88 18.26 25.40 3.05 13.18
12S 11.43 17.07 7.54 14.28 15.88 20.63 27.79 3.05 13.18
12 15.88 21.84 12.29 19.05 15.88 20.63 27.79 3.05 18.34
14S 11.43 17.07 7.54 14.28 19.05 23.01 30.18 3.05 13.18
14 15.88 21.84 12.29 19.05 19.05 23.01 30.18 3.05 18.34
16S 11.43 17.07 7.54 14.28 22.23 24.61 32.54 3.05 13.18
16 15.88 21.84 12.29 19.05 22.23 24.61 32.54 3.05 18.34
18 15.88 22.63 11.51 19.05 25.40 26.98 34.93 3.05 17.55
20 15.88 22.63 11.51 19.05 28.58 29.36 38.10 3.05 17.55
22 15.88 22.63 11.51 19.05 31.75 31.75 41.28 3.05 17.55
24 15.88 24.21 11.51 20.63 34.93 34.93 44.45 3.73 15.95
28 15.88 24.21 11.51 20.63 41.28 39.68 50.80 3.73 15.95
32 15.88 26.19 11.13 22.23 47.63 44.45 57.15 4.39 13.97
36 15.88 26.19 11.13 22.23 52.38 49.23 63.50 4.39 13.97
40 15.88 26.19 11.13 22.23 58.73 55.58 69.85 4.39 13.97
** Increase Z dimension by .312 for size “0” contact only.
* To complete order number, see how to order, page 59. Inches
Millimeters
All dimensions for reference only.
5
A
Thread
L¹
P¹
PGA
PGR
AC ( )06PG ( )*
L
A
Thread
XP
AC ( )06A*
AC ( )06E*
A
Thread
Z
L³
D
E
V
Thread
AC ( )05A*
AC ( )05E*
Q
A
Thread
PX
AC ( )06AF*
AC ( )06F*
L²
A E P1 Hex V Thread X Max
Shell Thread D +.020 L L1 L2 L3 P Flats PGA PGR Q Plated O.D. Z
Size Class 2B ±.010 –.030 Max Max Max Max Max Ref Ref Ref Max Class 2A Cable ±.045
10SL .6250-24UNEF .438 .298 2.129 3.010 2.189 .989 .894 .750 .150/.320 .070/.240 .946 .6250-24UNEF .312 .562
12S .7500-20UNEF .438 .312 2.129 3.010 2.261 .989 .894 .750 .150/.320 .070/.240 .995 .6250-24UNEF .312 .562
12 .7500-20UNEF .625 .469 2.524 3.500 2.644 1.364 .894 .750 .150/.320 .070/.240 .995 .6250-24UNEF .312 .812
14S .8750-20UNEF .438 .312 2.201 3.188 2.261 .989 1.083 .880 .190/.390 .110/.280 1.123 .7500-20UNEF .438 .562
14 .8750-20UNEF .625 .469 2.524 3.641 2.644 1.364 1.083 .880 .190/.390 .110/.280 1.123 .7500-20UNEF .438 .812
16S 1.0000-20UNEF .438 .312 2.201 3.265 2.266 .989 1.181 .940 .230/.470 .190/.350 1.250 .8750-20UNEF .531 .562
16 1.0000-20UNEF .625 .469 2.524 3.718 2.644 1.364 1.181 .940 .230/.470 .190/.350 1.250 .8750-20UNEF .531 .812
18 1.1250-18UNEF .625 .469 2.596 3.718 2.716 1.364 1.300 .940 .230/.470 .190/.350 1.333 1.0000-20UNEF .625 .812
20 1.2500-18UNEF .625 .469 2.654 3.798 2.774 1.364 1.487 1.060 .390/.560 .270/.470 1.461 1.1250-18UNEF .750 .812
22 1.3750-18UNEF .625 .469 2.654 4.080 2.916 1.364 1.487 1.060 .390/.560 .270/.470 1.588 1.2500-18UNEF .750 .812
24 1.5000-18UNEF .688 .469 2.885 4.142 3.051 1.427 1.712 1.060 .390/.560 .270/.470 1.715 1.3750-18UNEF .938 .812
28 1.7500-18UNS .688 .469 2.885 4.291 3.140 1.427 1.712 1.300 .510/.710 .350/.630 1.968 1.6250-18UNEF .938 .812
32 2.0000-18UNS .750 .469 2.943 4.643 3.184 1.489 2.063 1.650 .700/.980 .510/.790 2.209 1.8750-16UN 1.250 .812
36 2.2500-16UN .750 .469 2.943 4.643 3.245 1.489 2.283 1.650 .700/.980 .510/.790 2.463 2.0625-16UN 1.375 .812
40 2.5000-16UN .750 .469 3.068 5.635 3.670 1.489 2.688 1.650 .700/.980 .510/.790 2.718 2.3125-16UN 1.625 .812
E P1 Hex X Max
Shell D +.51 L L1 L2 L3 P Flats PGA PGR Q O.D. Z
Size ±.25 –.76 Max Max Max Max Max Ref Ref Ref Max Cable ±1.14
10SL 11.13 7.57 54.08 76.45 55.60 25.12 22.71 19.05 3.81/8.13 1.78/6.10 24.03 7.93 14.28
12S 11.13 7.93 54.08 76.45 57.43 25.12 22.71 19.05 3.81/8.13 1.78/6.10 25.27 7.93 14.28
12 15.88 11.91 64.11 88.90 67.16 34.65 22.71 19.05 3.81/8.13 1.78/6.10 25.27 7.93 20.63
14S 11.13 7.93 55.91 80.98 57.43 25.12 27.51 22.35 4.83/9.91 2.79/7.11 28.52 11.13 14.28
14 15.88 11.91 64.11 92.48 67.16 34.65 27.51 22.35 4.83/9.91 2.79/7.11 28.52 11.13 20.63
16S 11.13 7.93 55.91 82.93 57.56 25.12 30.00 23.88 5.84/11.94 4.83/8.89 31.75 13.49 14.28
16 15.88 11.91 64.11 94.44 67.16 34.65 30.00 23.88 5.84/11.94 4.83/8.89 31.75 13.49 20.63
18 15.88 11.91 65.94 94.44 68.99 34.65 33.02 23.88 5.84/11.94 4.83/8.89 33.86 15.88 20.63
20 15.88 11.91 67.41 96.47 70.46 34.65 37.77 26.92 9.91/14.22 6.86/11.94 37.11 19.05 20.63
22 15.88 11.91 67.41 103.63 74.07 34.65 37.77 26.92 9.91/14.22 6.86/11.94 40.34 19.05 20.63
24 17.48 11.91 73.28 105.21 77.50 36.25 43.49 26.92 9.91/14.22 6.86/11.94 43.56 23.83 20.63
28 17.48 11.91 73.28 108.99 79.76 36.25 43.49 33.02 12.95/18.03 8.89/16.00 49.99 23.83 20.63
32 19.05 11.91 74.75 117.93 80.87 37.82 52.40 41.91 17.78/24.89 12.95/20.07 56.11 31.75 20.63
36 19.05 11.91 74.75 117.93 82.42 37.82 57.99 41.91 17.78/24.89 12.95/20.07 62.56 34.93 20.63
40 19.05 11.91 77.93 143.13 93.22 37.82 68.28 41.91 17.78/24.89 12.95/20.07 69.04 41.28 20.63
All dimensions for reference only.
* To complete order number, see how to order, page 59. Inches
Millimeters
AC Threaded
straight plug
6
P
X
U
L
A Thread
AC( )08A*
Q
U¹
L¹
A Thread
Q
P
XAC( )08E*
AC Threaded
90 degree plug
Shell A Thread L L1 P Q Dia U U1 X Max
Size Class 2B Max Max Max Max Max Max O.D. Cable
10SL .6250-24NEF 1.492 1.492 .906 .946 1.305 1.812 .312
12S .7500-20UNEF 1.492 1.492 .906 .995 1.305 1.812 .312
12 .7500-20UNEF 1.867 1.867 .906 .995 1.305 1.812 .312
14S .8750-20UNEF 1.556 1.556 1.031 1.123 1.485 1.875 .438
14 .8750-20UNEF 1.931 1.931 1.031 1.123 1.485 1.875 .438
16S 1.0000-20UNEF 1.682 1.682 1.125 1.250 1.612 1.937 .531
16 1.0000-20UNEF 2.057 2.057 1.125 1.250 1.612 1.937 .531
18 1.1250-18NEF 2.119 2.119 1.234 1.333 1.738 2.109 .625
20 1.2500-18NEF 2.369 2.322 1.484 1.461 1.800 2.187 .750
22 1.3750-18NEF 2.369 2.322 1.484 1.588 1.862 2.250 .750
24 1.5000-18NEF 2.620 2.510 1.683 1.715 2.100 2.484 .938
28 1.7500-18NS 2.620 2.510 1.683 1.968 2.162 2.546 .938
32 2.0000-18NS 2.842 2.744 2.188 2.209 2.405 3.045 1.250
36 2.2500-16UN 2.900 2.869 2.344 2.463 2.536 3.218 1.375
40 2.5000-16UN 3.025 2.994 2.688 2.719 3.206 3.375 1.625
Shell L L1 P Q Dia U U1 X Max
Size Max Max Max Max Max Max O.D. Cable
10SL 37.90 37.90 23.01 24.03 33.15 46.03 7.93
12S 37.90 37.90 23.01 25.27 33.15 46.03 7.93
12 47.42 47.42 23.01 25.27 33.15 46.03 7.93
14S 39.52 39.52 26.19 28.52 37.72 47.63 11.13
14 49.05 49.05 26.19 28.52 37.72 47.63 11.13
16S 42.72 42.72 28.58 31.75 40.95 49.20 13.49
16 52.25 52.25 28.58 31.75 40.95 49.20 13.49
18 53.82 53.82 31.34 33.86 44.15 53.57 15.88
20 60.17 58.98 37.69 37.11 45.72 55.55 19.05
22 60.17 58.98 37.69 40.34 47.30 57.15 19.05
24 66.55 63.75 42.75 43.56 53.34 63.09 23.83
28 66.55 63.75 42.75 49.99 54.92 64.67 23.83
32 72.19 69.70 55.58 56.11 61.09 77.34 31.75
36 73.66 72.87 59.54 62.56 64.41 81.74 34.93
40 76.84 76.05 68.28 69.06 81.43 85.73 41.28
All dimensions for reference only.
* To complete order number, see how to order, page 59. Inches
Millimeters
7
3
Amphenol MIL-DTL-5015 and MIL-5015
Type Standard Cylindrical Connectors
DESIGN CHARACTERISTICS
•Medium to heavy weight cylindrical
•Durable, field-proven design
•Environmental resistant
•Resilient inserts
•Operating voltage to 3000 VAC (RMS) at sea level
•Threaded couplings
•Single key/keyway shell polarization
•Cost effective
CUSTOMER OPTIONS
•Five shell styles
•Nineteen shell sizes
•305 contact arrangements from 1 to 104 circuits
•Solder or crimp contacts, sizes 16-0 accepting
22-0 AWG.
•Coaxial and thermocouple contact options
•Five class designations
•Alternate insert positioning
•Hermetic configurations available
• Zinc alloy plating (cadmium-free) available
MS connectors meet the latest performance require-
ments of MIL-DTL-5015. These connectors represent
well-proven electrical capability at an acceptable cost for
most equipment where durability is important.
MIL-DTL-5015 features threaded couplings and single
key/keyway polarization, representing maximum simplic-
ity in design. Applications include military ground support
equipment, ordnance and shipboard installations.
Amphenol Industrial Operations manufactures five
classes of connectors to meet different requirements.
Class designations and brief descriptions are listed
below.
A – Solid Shell – for general, non-environmental appli-
cations.
C – Pressurized – for use on pressurized bulkheads or
pressure barriers; limits air leakage regardless of
type and class of plug mated with them.
E/F –Environmental Resisting with Strain Relief –
designed for applications where the connector will
be exposed to moisture, vibration, and rapid
changes in pressure and temperature.
R – Lightweight Environmental Resisting – shorter in
length and lighter in weight than the E and F
classes, the MS-R offers a high degree of reliability
under adverse conditions: recommended for new
design applications.
®
MS-A, MS-C
MS-E/F
MS-R
Amphenol SAE AS50151
Standard Cylindrical Connectors
DESIGN CHARACTERISTICS
• Medium to heavy weight cylindrical
• Durable,eld-provendesign
• Environmental resistant
• Resilient inserts
• Operating voltage to 3000 VAC (RMS) at sea level
• Threaded couplings
• Single key/keyway shell polarization
CUSTOMER OPTIONS
• Five shell styles
• Nineteen shell sizes
• 305 contact arrangements from 1 to 104 circuits
• Solder or crimp contacts, sizes 16-0 accepting
22-0 AWG.
• Five class designations
• Alternate insert positioning
• Hermeticcongurationsavailable
MS connectors meet the latest performance require ments
of SAE AS50151. These connectors represent well-
proven electrical capability at an acceptable cost for most
equipment where durability is important.
SAE AS50151 features threaded couplings and single
key/keyway polarization, representing maximum simplic-
ity in design. Applications include military ground support
equipment, ordnance and shipboard installations.
Amphenol Industrial Operations manufactures ve
classes of connectors to meet different requirements.
Class designations and brief descriptions are listed below.
A – Solid Shell – for general, non-environmental appli-
cations.
C – Pressurized – for use on pressurized bulkheads or
pressure barriers; limits air leakage regardless of
type and class of plug mated with them.
E/F –Environmental Resisting with Strain Relief –
designed for applications where the connector will
be exposed to moisture, vibration, and rapid changes
in pressure and temperature.
R – Lightweight Environmental Resisting – shorter in
length and lighter in weight than the E and F classes,
the MS-R offers a high degree of reliability under
adverse conditions: recommended for new design
applications.
MS-A, MS-C
MS-E/F
MS-R
Environmental Classes F and R are updated to and produced in strict
accordance to SAE AS50151. Classes A, C and E are still produced,
but are no longer listed on the qualied products database (QPD).
8
4
MS/Standard
MS-A and MS-C
MS-A and MS-C
MS-A and MS-C class connectors perform many of the
vital functions in powering, testing and ground support
systems. Class A applications include communications
equipment, computers and shipboard installations where
mechanical forces and physical parameters are not sub-
ject to extreme or rapid environmental changes.
Class C connectors are most frequently used on pressur-
ized bulkheads or pressure barriers at elevated altitudes
or maritime applications. Air leakage is limited to one
cubic inch per hour at a pressure differential of 30 lbs. per
square inch.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. Electrically conductive cadmium plate finish
with an olive drab chromate after-treat offers corrosion
resistance.
Contacts:
Contacts are available in both solder and crimp versions.
Pins and sockets are machined from copper alloy with a
silver plated finish. Size 16 and 12 socket contacts incor-
porate a closed entry design. Refer to pages 49, 67 and
68 for additional contact information.
Inserts:
Inserts are resilient neoprene, offering high dielectric
strength, high arc resistance and resistance to vibration.
Proprietary design permits pressurization of either pin or
socket insert.
wall mounting receptacle
cable connecting plug
box mounting receptacle
straight plug
90 degree plug
MS/Standard
MS-A and MS-C
MS-A and MS-C
MS-A and MS-C class connectors perform many of the
vital functions in powering, testing and ground support
systems. Class A applications include communications
equipment, computers and shipboard installations where
mechanical forces and physical parameters are not sub-
ject to extreme or rapid environmental changes.
Class C connectors are most frequently used on pressur-
ized bulkheads or pressure barriers at elevated altitudes
or maritime applications. Air leakage is limited to one cubic
inch per hour at a pressure differential of 30 lbs. per square
inch.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. Electrically conductive cadmium plate nish
with an olive drab chromate after-treat offers corrosion
resistance.
Contacts:
Contacts are solder with pre-lled solder cups. Pins and
sockets are machined from copper alloy with a silver
plated nish. Size 16 and 12 socket contacts incor porate a
closed entry design. Refer to page 54 for additional contact
information.
Inserts:
Inserts are resilient neoprene, offering high dielectric
strength, high arc resistance and resistance to vibration.
wall mounting receptacle
inline receptacle
box mounting receptacle
straight plug
90 degree plug
9
5
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
K
+.020
–.010
L
±.030
M
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
V
Thread
Class 2A
Z
+.050
–.060
8S .5000-28UNEF .391 .672 1.391 .562 .594 .875 .120 .5000-28UNEF .422
10S .6250-24 UNF .391 .672 1.468 .562 .719 1.000 .120 .5000-28UNEF .422
10SL .6250-24 UNF .391 .672 1.468 .562 .719 1.000 .120 .6250-24NEF .422
12S .7500-20UNEF .450 .672 1.468 .562 .812 1.094 .120 .6250-24NEF .422
12 .7500-20UNEF .625 .860 1.843 .750 .812 1.094 .120 .6250-24NEF .672
14S .8750-20UNEF .450 .672 1.468 .562 .906 1.188 .120 .7500-20UNEF .422
14 .8750-20UNEF .625 .860 1.843 .750 .906 1.188 .120 .7500-20UNEF .672
16S 1.0000-20UNEF .450 .672 1.468 .562 .969 1.281 .120 .8750-20UNEF .422
16 1.0000-20UNEF .625 .860 1.843 .750 .969 1.281 .120 .8750-20UNEF .672
18 1.1250-18NEF .625 .891 1.938 .750 1.063 1.375 .120 1.0000-20UNEF .641*
20 1.2500-18NEF .625 .891 1.844 .750 1.156 1.500 .120 1.1875-18NEF .641*
22 1.3750-18NEF .625 .891 1.938 .750 1.250 1.625 .120 1.1875-18NEF .641*
24 1.5000-18NEF .625 .953 1.969 .812 1.375 1.750 .147 1.4375-18NEF .578*
28 1.7500-18NS .625 .953 2.188 .812 1.562 2.000 .147 1.4375-18NEF .578*
32 2.0000-18NS .625 1.031 2.157 .875 1.750 2.250 .173 1.7500-18NS .500*
36 2.2500-16UN .625 1.031 2.219 .875 1.938 2.500 .173 2.0000-18NS .500*
40 2.5000-16UN .625 1.031 2.188 .875 2.188 2.750 .173 2.2500-16UN .500*
44*** 2.7500-16UN .625 1.031† 2.547 .875 2.375 3.000†† .173 2.5000-16UN .751**
48*** 3.0000-16UN .625 1.031† 2.547 .875 2.625 3.000†† .173 3.0000-16UN .751**
MS/Standard
MS3100A or C
wall mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
†† ±.020
SR
T
4 Holes
S
R
B
M
K
Z
V
Thread
A
Thread
L
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
K
+.020
–.010
L
±.030
M
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
V
Thread
Class 2A
Z
+.050
–.060
8S .5000-28UNEF .391 .672 1.391 .562 .594 .875 .120 .5000-28UNEF .422
10S .6250-24 UNF .391 .672 1.468 .562 .719 1.000 .120 .5000-28UNEF .422
10SL .6250-24 UNF .391 .672 1.468 .562 .719 1.000 .120 .6250-24NEF .422
12S .7500-20UNEF .450 .672 1.468 .562 .812 1.094 .120 .6250-24NEF .422
12 .7500-20UNEF .625 .860 1.843 .750 .812 1.094 .120 .6250-24NEF .672
14S .8750-20UNEF .450 .672 1.468 .562 .906 1.188 .120 .7500-20UNEF .422
14 .8750-20UNEF .625 .860 1.843 .750 .906 1.188 .120 .7500-20UNEF .672
16S 1.0000-20UNEF .450 .672 1.468 .562 .969 1.281 .120 .8750-20UNEF .422
16 1.0000-20UNEF .625 .860 1.843 .750 .969 1.281 .120 .8750-20UNEF .672
18 1.1250-18NEF .625 .891 1.938 .750 1.063 1.375 .120 1.0000-20UNEF .641*
20 1.2500-18NEF .625 .891 1.844 .750 1.156 1.500 .120 1.1875-18NEF .641*
22 1.3750-18NEF .625 .891 1.938 .750 1.250 1.625 .120 1.1875-18NEF .641*
24 1.5000-18NEF .625 .953 1.969 .812 1.375 1.750 .147 1.4375-18NEF .578*
28 1.7500-18NS .625 .953 2.188 .812 1.562 2.000 .147 1.4375-18NEF .578*
32 2.0000-18NS .625 1.031 2.157 .875 1.750 2.250 .173 1.7500-18NS .500*
36 2.2500-16UN .625 1.031 2.219 .875 1.938 2.500 .173 2.0000-18NS .500*
40 2.5000-16UN .625 1.031 2.188 .875 2.188 2.750 .173 2.2500-16UN .500*
44*** 2.7500-16UN .625 1.031† 2.547 .875 2.375 3.000†† .173 2.5000-16UN .751**
48*** 3.0000-16UN .625 1.031† 2.547 .875 2.625 3.000†† .173 3.0000-16UN .751**
MS/Standard
MS3100A or C
wall mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
†† ±.020
10
6
N
Z
A
Thread
B
L
V
Thread
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
L
±.030
N
Dia.
Max.
V
Thread
Class 2A
Z
±.040
8S .5000-28UNEF .406 1.390 .532 .5000-28UNEF 1.094
10S .6250-24NEF .406 1.468 .628 .5000-28UNEF 1.094
10SL .6250-24NEF .406 1.468 .755 .6250-24NEF 1.094
12S .7500-20UNEF .422 1.468 .755 .6250-24NEF 1.094
12 .7500-20UNEF .656 1.843 .755 .6250-24NEF 1.532
14S .8750-20UNEF .391 1.468 .882 .7500-20UNEF 1.094
14 .8750-20UNEF .625 1.843 .882 .7500-20UNEF 1.532
16S 1.0000-20UNEF .391 1.468 1.010 .8750-20UNEF 1.094
16 1.0000-20UNEF .625 1.843 1.010 .8750-20UNEF 1.532
18 1.1250-18NEF .625 1.938 1.137 1.0000-20UNEF 1.532*
20 1.2500-18NEF .625 1.844 1.264 1.1875-18NEF 1.532*
22 1.3750-18NEF .625 1.938 1.392 1.1875-18NEF 1.532*
24 1.5000-18NEF .625 1.969 1.519 1.4375-18NEF 1.532*
28 1.7500-18NS .625 2.188 1.774 1.4375-18NEF 1.532*
32 2.0000-18NS .625 2.157 1.996 1.7500-18NS 1.532*
36 2.2500-16UN .625 2.219 2.251 2.0000-18NS 1.532*
40 2.5000-16UN .625 2.188 2.506 2.2500-16UN 1.532*
44*** 2.7500-16UN .625 2.521 3.135 2.5000-16UN 1.782**
MS/Standard
MS3101A
cable connecting plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
L
±.030
N
Dia.
Max.
V
Thread
Class 2A
Z
±.040
8S .5000-28UNEF .406 1.390 .532 .5000-28UNEF 1.094
10S .6250-24NEF .406 1.468 .628 .5000-28UNEF 1.094
10SL .6250-24NEF .406 1.468 .755 .6250-24NEF 1.094
12S .7500-20UNEF .422 1.468 .755 .6250-24NEF 1.094
12 .7500-20UNEF .656 1.843 .755 .6250-24NEF 1.532
14S .8750-20UNEF .391 1.468 .882 .7500-20UNEF 1.094
14 .8750-20UNEF .625 1.843 .882 .7500-20UNEF 1.532
16S 1.0000-20UNEF .391 1.468 1.010 .8750-20UNEF 1.094
16 1.0000-20UNEF .625 1.843 1.010 .8750-20UNEF 1.532
18 1.1250-18NEF .625 1.938 1.137 1.0000-20UNEF 1.532*
20 1.2500-18NEF .625 1.844 1.264 1.1875-18NEF 1.532*
22 1.3750-18NEF .625 1.938 1.392 1.1875-18NEF 1.532*
24 1.5000-18NEF .625 1.969 1.519 1.4375-18NEF 1.532*
28 1.7500-18NS .625 2.188 1.774 1.4375-18NEF 1.532*
32 2.0000-18NS .625 2.157 1.996 1.7500-18NS 1.532*
36 2.2500-16UN .625 2.219 2.251 2.0000-18NS 1.532*
40 2.5000-16UN .625 2.188 2.506 2.2500-16UN 1.532*
44*** 2.7500-16UN .625 2.521 3.135 2.5000-16UN 1.782**
MS/Standard
MS3101A
inline receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
11
7
SR
T
4 Holes
S
RB
M
KZ
A
Thread
L
N
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
44*** 2.7500-16UN .625 1.063 .543† .875 2.594 2.375 3.000†† .173 .768**
48*** 3.0000-16UN .625 1.063 .543† .875 2.812 2.625 3.250†† .209 .769**
MS/Standard
MS3102A or C
box mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
†† ±.020
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
44*** 2.7500-16UN .625 1.063 .543† .875 2.594 2.375 3.000†† .173 .768**
48*** 3.0000-16UN .625 1.063 .543† .875 2.812 2.625 3.250†† .209 .769**
MS/Standard
MS3102A or C
box mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
†† ±.020
12
8
L
Z
J
V
Thread
A
Thread
Q
Shell
Size
A
Thread
Class 2B
J
±.005
L
±.030
Q
Dia.
Max.
V
Thread
Class 2A
Z
±.045
8S .5000-28UNEF .531 .859 .741 .5000-28UNEF .562
10S .6250-24NEF .531 .937 .869 .5000-28UNEF .562
10SL .6250-24NEF .531 .937 .946 .6250-24NEF .562
12S .7500-20UNEF .531 .937 .995 .6250-24NEF .562
12 .7500-20UNEF .719 1.124 .995 .6250-24NEF .812
14S .8750-20UNEF .531 .937 1.123 .7500-20UNEF .562
14 .8750-20UNEF .719 1.124 1.123 .7500-20UNEF .812
16S 1.0000-20UNEF .531 .937 1.250 .8750-20UNEF .562
16 1.0000-20UNEF .719 1.124 1.250 .8750-20UNEF .812
18 1.1250-18NEF .719 1.219 1.333 1.0000-20UNEF .812*
20 1.2500-18NEF .719 1.125 1.461 1.1875-18NEF .812*
22 1.3750-18NEF .719 1.219 1.588 1.1875-18NEF .812*
24 1.5000-18NEF .719 1.251 1.715 1.4375-18NEF .812*
28 1.7500-18NS .719 1.470 1.968 1.4375-18NEF .812*
32 2.0000-18NS .719 1.439 2.209 1.7500-18NS .812*
36 2.2500-16UN .719 1.500 2.463 2.0000-18NS .812*
40 2.5000-16UN .719 1.469 2.719 2.2500-16UN .812*
44*** 2.7500-16UN .719 1.818† 3.084 2.5000-16UN 1.063**
48*** 3.3000-16UN .719 1.818† 3.354 3.0000-16UN 1.063**
MS/Standard
MS3106A
straight plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
Shell
Size
A
Thread
Class 2B
J
±.005
L
±.030
Q
Dia.
Max.
V
Thread
Class 2A
Z
±.045
8S .5000-28UNEF .531 .859 .741 .5000-28UNEF .562
10S .6250-24NEF .531 .937 .869 .5000-28UNEF .562
10SL .6250-24NEF .531 .937 .946 .6250-24NEF .562
12S .7500-20UNEF .531 .937 .995 .6250-24NEF .562
12 .7500-20UNEF .719 1.124 .995 .6250-24NEF .812
14S .8750-20UNEF .531 .937 1.123 .7500-20UNEF .562
14 .8750-20UNEF .719 1.124 1.123 .7500-20UNEF .812
16S 1.0000-20UNEF .531 .937 1.250 .8750-20UNEF .562
16 1.0000-20UNEF .719 1.124 1.250 .8750-20UNEF .812
18 1.1250-18NEF .719 1.219 1.333 1.0000-20UNEF .812*
20 1.2500-18NEF .719 1.125 1.461 1.1875-18NEF .812*
22 1.3750-18NEF .719 1.219 1.588 1.1875-18NEF .812*
24 1.5000-18NEF .719 1.251 1.715 1.4375-18NEF .812*
28 1.7500-18NS .719 1.470 1.968 1.4375-18NEF .812*
32 2.0000-18NS .719 1.439 2.209 1.7500-18NS .812*
36 2.2500-16UN .719 1.500 2.463 2.0000-18NS .812*
40 2.5000-16UN .719 1.469 2.719 2.2500-16UN .812*
44*** 2.7500-16UN .719 1.818† 3.084 2.5000-16UN 1.063**
48*** 3.3000-16UN .719 1.818† 3.354 3.0000-16UN 1.063**
MS/Standard
MS3106A
straight plug
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
*** Available in proprietary version only.
† +.020 –.030
13
9
U
W
V
Thread
L
ZJ A
Thread
Q
Shell
Size
A
Thread
Class 2B
J
±.005
L
Max.
Q
Dia.
Max.
U
Max.
V
Thread
Class 2A W
Z
±.045
8S .5000-28UNEF .531 .896 .741 .750 .5000-28UNEF .375 .562
10S .6250-24NEF .531 .927 .869 .750 .5000-28UNEF .375 .562
10SL .6250-24NEF .531 .951 .946 .875 .6250-24NEF .375 .562
12S .7500-20UNEF .531 .956 .995 .875 .6250-24NEF .375 .562
12 .7500-20UNEF .719 1.143 .995 .875 .6250-24NEF .375 .812
14S .8750-20UNEF .531 1.120 1.123 1.000 .7500-20UNEF .375 .562
14 .8750-20UNEF .719 1.207 1.123 1.000 .7500-20UNEF .375 .812
16S 1.0000-20UNEF .531 1.146 1.250 1.062 .8750-20UNEF .375 .562
16 1.0000-20UNEF .719 1.332 1.250 1.062 .8750-20UNEF .375 .812
18 1.1250-18NEF .719 1.395 1.333 1.188 1.0000-20UNEF .375 .812*
20 1.2500-18NEF .719 1.645 1.461 1.250 1.1875-18NEF .375 .812*
22 1.3750-18NEF .719 1.645 1.588 1.312 1.1875-18NEF .375 .812*
24 1.5000-18NEF .719 1.896 1.715 1.438 1.4375-18NEF .375 .812*
28 1.7500-18NS .719 1.896 1.968 1.500 1.4375-18NEF .375 .812*
32 2.0000-18NS .719 2.118 2.209 1.750 1.7500-18NS .438 .812*
36 2.2500-16UN .719 2.176 2.463 1.875 2.0000-18NS .500 .812*
40 2.5000-16UN .719 2.301 2.719 2.031 2.2500-16UN .500 .812*
MS/Standard
MS3108A
90 degree plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2B
J
±.005
L
Max.
Q
Dia.
Max.
U
Max.
V
Thread
Class 2A W
Z
±.045
8S .5000-28UNEF .531 .896 .741 .750 .5000-28UNEF .375 .562
10S .6250-24NEF .531 .927 .869 .750 .5000-28UNEF .375 .562
10SL .6250-24NEF .531 .951 .946 .875 .6250-24NEF .375 .562
12S .7500-20UNEF .531 .956 .995 .875 .6250-24NEF .375 .562
12 .7500-20UNEF .719 1.143 .995 .875 .6250-24NEF .375 .812
14S .8750-20UNEF .531 1.120 1.123 1.000 .7500-20UNEF .375 .562
14 .8750-20UNEF .719 1.207 1.123 1.000 .7500-20UNEF .375 .812
16S 1.0000-20UNEF .531 1.146 1.250 1.062 .8750-20UNEF .375 .562
16 1.0000-20UNEF .719 1.332 1.250 1.062 .8750-20UNEF .375 .812
18 1.1250-18NEF .719 1.395 1.333 1.188 1.0000-20UNEF .375 .812*
20 1.2500-18NEF .719 1.645 1.461 1.250 1.1875-18NEF .375 .812*
22 1.3750-18NEF .719 1.645 1.588 1.312 1.1875-18NEF .375 .812*
24 1.5000-18NEF .719 1.896 1.715 1.438 1.4375-18NEF .375 .812*
28 1.7500-18NS .719 1.896 1.968 1.500 1.4375-18NEF .375 .812*
32 2.0000-18NS .719 2.118 2.209 1.750 1.7500-18NS .438 .812*
36 2.2500-16UN .719 2.176 2.463 1.875 2.0000-18NS .500 .812*
40 2.5000-16UN .719 2.301 2.719 2.031 2.2500-16UN .500 .812*
MS/Standard
MS3108A
90 degree plug
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
14
10
MS/Standard
MS-E/F
MS-E & F
MS Class F connectors satisfy all the performance
requirements of MIL-DTL-5015. Class E, environmental
is also produced, but is no longer listed on the qualified
products listing (QPL). These connectors are recom-
mended for conditions where vibration, moisture, pres-
sure and/or temperature are extreme. Strain relief is
supplied on most shell sizes.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. The standard hardware plating is electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance. Consult
Amphenol, Sidney, NY for other plating options.
Contacts:
Contacts are silver plated copper alloy for maximum cor-
rosion resistance, maximum current carrying capacity
and low millivolt drop. Size 16 and 12 socket contacts
incorporate a closed entry design. Crimp and solder ver-
sions are available. Refer to pages 49, 67 and 68 for
additional contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, high dielectric strength, and resistance to
vibration. Either pin or socket insert can be pressurized.
Strain Relief Clamp:
Strain relief clamps minimize tension at the solder well
connection and provide a positive mechanical moisture
seal. Complete field serviceability is possible with the
strain relief clamp.
wall mounting receptacle
cable connecting plug
box mounting receptacle
straight plug
90 degree plug
MS/Standard
MS-E/F
MS-E & F
MS Class F connectors satisfy all the performance
requirements of SAE AS50151. Class E, environmental is
also produced, but is no longer listed on the qualied
products listing (QPL). These connectors are recom-
mended for conditions where vibration, moisture, pres-
sure and/or temperature are extreme. Strain relief is
supplied on most shell sizes.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. The standard hardware plating is electrically
conductive cadmium plated nish with an olive drab chro-
mate after-treatment for corrosion resistance.
Contacts:
Contacts are silver plated copper alloy for maximum cor-
rosion resistance, maximum current carrying capacity and
low millivolt drop. Size 16 and 12 socket contacts
incorporate a closed entry design. Refer to page 54 for
additional contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, high dielectric strength, and resistance to
vibration. Either pin or socket insert can be pressurized.
Strain Relief Clamp:
Strain relief clamps minimize tension at the solder well
connection and provide a positive mechanical moisture
seal. Complete eld serviceability is possible with the
strain relief clamp.
wall mounting receptacle
inline receptacle
box mounting receptacle
straight plug
90 degree plug
15
11
SR
T
4 Holes
S
R
A Thread
B
M
KZ
XX P
L
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
Max.
M
+.010
–.000
P
Max.
R
±.005
S
±.010
T
Dia.
+.004
–.002
Z*
Max.
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .391 .672 2.129 .562 .896 .719 1.000 .120 .472 .281
12S .7500-20UNEF .450 .672 2.129 .562 .896 .812 1.094 .120 .472 .281
12 .7500-20UNEF .625 .860 2.129 .750 .896 .812 1.094 .120 .722 .281
14S .8750-20UNEF .450 .672 2.201 .562 1.021 .906 1.188 .120 .472 .406
14 .8750-20UNEF .625 .860 2.524 .750 1.021 .906 1.188 .120 .722 .406
16S 1.0000-20UNEF .450 .672 2.201 .562 1.151 .969 1.281 .120 .472 .500
16 1.0000-20UNEF .625 .860 2.524 .750 1.151 .969 1.281 .120 .722 .500
18 1.1250-18UNEF .625 .891 2.596 .750 1.242 1.063 1.375 .120 .691 .531
20 1.2500-18UNEF .625 .891 2.654 .750 1.499 1.156 1.500 .120 .691 .656
22 1.3750-18UNEF .625 .891 2.654 .750 1.499 1.250 1.625 .120 .691 .740
24 1.5000-18UNEF .625 .953 2.885 .812 1.781 1.375 1.750 .147 .628 .781
28 1.7500-18UNS .625 .953 2.885 .812 1.781 1.562 2.000 .147 .628 .922
32 2.0000-18UNS .625 1.031 2.943 .875 2.087 1.750 2.250 .173 .550 1.156
36 2.2500-16UN .625 1.031 2.943 .875 2.281 1.938 2.500 .173 .550 1.250
40 2.5000-16UN .625 1.031 3.068 .875 2.581 2.188 2.750 .173 .550 1.562
MS/Standard
MS3100E/F
wall mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
Max.
M
+.010
–.000
P
Max.
R
±.005
S
±.010
T
Dia.
+.004
–.002
Z*
Max.
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .391 .672 2.129 .562 .896 .719 1.000 .120 .472 .281
12S .7500-20UNEF .450 .672 2.129 .562 .896 .812 1.094 .120 .472 .281
12 .7500-20UNEF .625 .860 2.129 .750 .896 .812 1.094 .120 .722 .281
14S .8750-20UNEF .450 .672 2.201 .562 1.021 .906 1.188 .120 .472 .406
14 .8750-20UNEF .625 .860 2.524 .750 1.021 .906 1.188 .120 .722 .406
16S 1.0000-20UNEF .450 .672 2.201 .562 1.151 .969 1.281 .120 .472 .500
16 1.0000-20UNEF .625 .860 2.524 .750 1.151 .969 1.281 .120 .722 .500
18 1.1250-18UNEF .625 .891 2.596 .750 1.242 1.063 1.375 .120 .691 .531
20 1.2500-18UNEF .625 .891 2.654 .750 1.499 1.156 1.500 .120 .691 .656
22 1.3750-18UNEF .625 .891 2.654 .750 1.499 1.250 1.625 .120 .691 .740
24 1.5000-18UNEF .625 .953 2.885 .812 1.781 1.375 1.750 .147 .628 .781
28 1.7500-18UNS .625 .953 2.885 .812 1.781 1.562 2.000 .147 .628 .922
32 2.0000-18UNS .625 1.031 2.943 .875 2.087 1.750 2.250 .173 .550 1.156
36 2.2500-16UN .625 1.031 2.943 .875 2.281 1.938 2.500 .173 .550 1.250
40 2.5000-16UN .625 1.031 3.068 .875 2.581 2.188 2.750 .173 .550 1.562
MS/Standard
MS3100E/F
wall mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
16
12
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
J
Max.
L
Max.
Z*
Max.
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .406 .896 2.129 1.134 .281
12S .7500-20UNEF .422 .896 2.129 1.134 .281
12 .7500-20UNEF .656 .896 2.129 1.572 .281
14S .8750-20UNEF .391 1.021 2.201 1.134 .406
14 .8750-20UNEF .625 1.021 2.524 1.572 .406
16S 1.0000-20UNEF .391 1.151 2.201 1.134 .500
16 1.0000-20UNEF .625 1.151 2.524 1.572 .500
18 1.1250-18UNEF .625 1.242 2.596 1.572 .531
20 1.2500-18UNEF .625 1.499 2.654 1.572 .656
22 1.3750-18UNEF .625 1.499 2.654 1.572 .740
24 1.5000-18UNEF .625 1.781 2.885 1.572 .781
28 1.7500-18UNS .625 1.781 2.885 1.572 .922
32 2.0000-18UNS .625 2.087 2.943 1.572 1.156
36 2.2500-16UN .625 2.281 2.943 1.572 1.250
40 2.5000-16UN .625 2.581 3.068 1.572 1.562
MS/Standard
MS3101E/F
cable connecting plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
A Thread
B
XX J
L
Z
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
J
Max.
L
Max.
Z*
Max.
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .406 .896 2.129 1.134 .281
12S .7500-20UNEF .422 .896 2.129 1.134 .281
12 .7500-20UNEF .656 .896 2.129 1.572 .281
14S .8750-20UNEF .391 1.021 2.201 1.134 .406
14 .8750-20UNEF .625 1.021 2.524 1.572 .406
16S 1.0000-20UNEF .391 1.151 2.201 1.134 .500
16 1.0000-20UNEF .625 1.151 2.524 1.572 .500
18 1.1250-18UNEF .625 1.242 2.596 1.572 .531
20 1.2500-18UNEF .625 1.499 2.654 1.572 .656
22 1.3750-18UNEF .625 1.499 2.654 1.572 .740
24 1.5000-18UNEF .625 1.781 2.885 1.572 .781
28 1.7500-18UNS .625 1.781 2.885 1.572 .922
32 2.0000-18UNS .625 2.087 2.943 1.572 1.156
36 2.2500-16UN .625 2.281 2.943 1.572 1.250
40 2.5000-16UN .625 2.581 3.068 1.572 1.562
MS/Standard
MS3101E/F
inline receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
17
13
SR
T
4 Holes
S
RB
M
KZ
A
Thread
L
N
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578*
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
MS/Standard
MS3102E
box mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578*
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
MS/Standard
MS3102E
box mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
18
14
A
Thread
B
J XX
Z
LQ
Shell
Size
A
Thread
Class 2A
B
±.005
J
Max.
L
Max.
Q
Max.
Z*
±.045
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .531 .896 2.129 .946 .607 .281
12S .7500-20UNEF .531 .896 2.129 .995 .607 .281
12 .7500-20UNEF .719 .896 2.129 .995 .857 .281
14S .8750-20UNEF .531 1.021 2.201 1.123 .607 .406
14 .8750-20UNEF .719 1.021 2.524 1.123 .857 .406
16S 1.0000-20UNEF .531 1.151 2.201 1.250 .607 .500
16 1.0000-20UNEF .719 1.151 2.524 1.250 .857 .500
18 1.1250-18UNEF .719 1.242 2.596 1.333 .857 .531
20 1.2500-18UNEF .719 1.499 2.654 1.461 .857 .656
22 1.3750-18UNEF .719 1.499 2.654 1.588 .857 .740
24 1.5000-18UNEF .719 1.781 2.885 1.715 .857 .781
28 1.7500-18UNS .719 1.781 2.885 1.968 .857 .922
32 2.0000-18UNS .719 2.087 2.943 2.209 .857 1.156
36 2.2500-16UN .719 2.281 2.943 2.463 .857 1.250
40 2.5000-16UN .719 2.581 3.068 2.718 .857 1.562
MS/Standard
MS3106E/F
straight plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
±.005
J
Max.
L
Max.
Q
Max.
Z*
±.045
XX
Min.
Cable
Clearance
10SL .6250-24UNEF .531 .896 2.129 .946 .607 .281
12S .7500-20UNEF .531 .896 2.129 .995 .607 .281
12 .7500-20UNEF .719 .896 2.129 .995 .857 .281
14S .8750-20UNEF .531 1.021 2.201 1.123 .607 .406
14 .8750-20UNEF .719 1.021 2.524 1.123 .857 .406
16S 1.0000-20UNEF .531 1.151 2.201 1.250 .607 .500
16 1.0000-20UNEF .719 1.151 2.524 1.250 .857 .500
18 1.1250-18UNEF .719 1.242 2.596 1.333 .857 .531
20 1.2500-18UNEF .719 1.499 2.654 1.461 .857 .656
22 1.3750-18UNEF .719 1.499 2.654 1.588 .857 .740
24 1.5000-18UNEF .719 1.781 2.885 1.715 .857 .781
28 1.7500-18UNS .719 1.781 2.885 1.968 .857 .922
32 2.0000-18UNS .719 2.087 2.943 2.209 .857 1.156
36 2.2500-16UN .719 2.281 2.943 2.463 .857 1.250
40 2.5000-16UN .719 2.581 3.068 2.718 .857 1.562
MS/Standard
MS3106E/F
straight plug
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
19
15
Q
N
Y
UA
Thread
LJ
Z
Shell
Size
A
Thread
Class 2B
J
±.005
L
Max.
N
Max.
Q
Dia.
Max.
U
Max.
Y
Thread
Class 2B
Z
±.045
8S .5000-28UNEF .531 .927 .807 .741 1.445 6-32NC .562
10S .6250-24NEF .531 .927 .807 .869 1.445 6-32NC .562
10SL .6250-24NEF .531 .951 .901 .946 1.508 6-32NC .562
12S .7500-20UNEF .531 .956 .901 .995 1.508 6-32NC .562
12 .7500-20UNEF .719 1.143 .901 .995 1.508 6-32NC .812
14S .8750-20UNEF .531 1.020 1.026 1.123 1.570 6-32NC .562
14 .8750-20UNEF .719 1.207 1.026 1.123 1.570 6-32NC .812
16S 1.0000-20UNEF .531 1.146 1.119 1.250 1.633 6-32NC .562
16 1.1000-20UNEF .719 1.333 1.119 1.250 1.633 6-32NC .812
18 1.1250-18NEF .719 1.395 1.229 1.333 1.759 6-32NC .812*
20 1.2500-18NEF .719 1.598 1.479 1.461 1.931 8-32NC .812*
22 1.3750-18NEF .719 1.598 1.479 1.588 1.993 8-32NC .812*
24 1.5000-18NEF .719 1.786 1.666 1.729 2.119 8-32NC .812*
28 1.7500-18NS .719 1.786 1.666 1.968 2.181 8-32NC .812*
32 2.0000-18NS .719 2.020 2.135 2.209 2.570 10-32NF .812*
36 2.2500-16UN .719 2.145 2.260 2.463 2.695 10-32NF .812*
40 2.5000-16UN .719 2.270 2.510 2.719 2.851 10-32NF .812*
MS/Standard
MS3108E
90 degree plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2B
J
±.005
L
Max.
N
Max.
Q
Dia.
Max.
U
Max.
Y
Thread
Class 2B
Z
±.045
8S .5000-28UNEF .531 .927 .807 .741 1.445 6-32NC .562
10S .6250-24NEF .531 .927 .807 .869 1.445 6-32NC .562
10SL .6250-24NEF .531 .951 .901 .946 1.508 6-32NC .562
12S .7500-20UNEF .531 .956 .901 .995 1.508 6-32NC .562
12 .7500-20UNEF .719 1.143 .901 .995 1.508 6-32NC .812
14S .8750-20UNEF .531 1.020 1.026 1.123 1.570 6-32NC .562
14 .8750-20UNEF .719 1.207 1.026 1.123 1.570 6-32NC .812
16S 1.0000-20UNEF .531 1.146 1.119 1.250 1.633 6-32NC .562
16 1.1000-20UNEF .719 1.333 1.119 1.250 1.633 6-32NC .812
18 1.1250-18NEF .719 1.395 1.229 1.333 1.759 6-32NC .812*
20 1.2500-18NEF .719 1.598 1.479 1.461 1.931 8-32NC .812*
22 1.3750-18NEF .719 1.598 1.479 1.588 1.993 8-32NC .812*
24 1.5000-18NEF .719 1.786 1.666 1.729 2.119 8-32NC .812*
28 1.7500-18NS .719 1.786 1.666 1.968 2.181 8-32NC .812*
32 2.0000-18NS .719 2.020 2.135 2.209 2.570 10-32NF .812*
36 2.2500-16UN .719 2.145 2.260 2.463 2.695 10-32NF .812*
40 2.5000-16UN .719 2.270 2.510 2.719 2.851 10-32NF .812*
MS/Standard
MS3108E
90 degree plug
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
20
16
wall mounting receptacle
cable connecting plug
box mounting receptacle
straight plug
MS/Standard
MS-R
MS-R
Specification requirements for greater reliability in a
shorter, lighter weight environmental resistant connector
led to the design of the MS-R. MS Class R connectors
satisfy all the performance requirements of MIL-DTL-
5015.
This low profile assembly was attained by moving the
axial compression nut and grommet assembly forward
and flush with the rear of the insert. The neoprene grom-
met, with its low coefficient of friction, assures easier
threading of wire bundles and quicker assembly and ser-
viceability of the unit. Molded webs in each wire hole
insure a moisture barrier around each wire.
The addition of an “O” ring at the main joint of all
MS3106R plugs provide a main joint seal supplementary
to the interfacial seal, thus insuring a higher degree of
reliability when connector halves from different sources
are employed. MS-R types are recommended for new
design applications.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. All components have the standard electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance. Consult
Amphenol, Sidney, NY for other plating options.
Contacts:
Contacts are machined from copper alloy for maximum
corrosion resistance, maximum current carrying capacity
and low millivolt drop. Both crimp and solder versions are
available. Refer to pages 49, 67 and 68 for additional
contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, maximum vibration resistance and high
dielectric strength. Either pin or socket insert can be
pressurized.
MS/Standard
MS-R
MS-R
Specication requirements for greater reliability in a
shorter, lighter weight environmental resistant connector
led to the design of the MS-R. MS Class R connectors
satisfy all the performance requirements of SAE AS50151.
This low prole assembly was attained by moving the axial
compression nut and grommet assembly forward and
ush with the rear of the insert. The neoprene grom met,
with its low coefcient of friction, assures easier threading
of wire bundles and quicker assembly and ser viceability of
the unit. Molded webs in each wire hole insure a moisture
barrier around each wire.
The addition of an “O” ring at the main joint of all MS3106R
plugs provide a main joint seal supplementary to the
interfacial seal, thus insuring a higher degree of reliability
when connector halves from different sources are
employed.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. All components have the standard electrically
conductive cadmium plated nish with an olive drab chro-
mate after-treatment for corrosion resistance.
Contacts:
Contacts are machined from copper alloy for maximum
corrosion resistance, maximum current carrying capacity
and low millivolt drop. Refer to page 54 for additional
contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, maximum vibration resistance and high
dielectric strength. Either pin or socket insert can be
pressurized.
straight plug
box mounting receptacle
inline receptacle
wall mounting receptacle
21
17
L
B
A
Thread
Y
H
P
K
MZ
S
R
RS
T
4 Holes
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
H
Dia.
Max.
K
+.020
–.010
L
Max.
M
+.010
–.000
P
Dia.
Max.
R
±.005
S
±.031
Y
Thread
Class 2
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .959 .672 1.588 .562 .557 .594 .875 6-32NC .120 .422
10S .6250-24NEF .391 1.026 .672 1.588 .562 .682 .719 1.000 6-32NC .120 .422
10SL .6250-24NEF .391 1.120 .672 1.588 .562 .807 .719 1.000 6-32NC .120 .422
12S .7500-20UNEF .450 1.120 .672 1.588 .562 .807 .812 1.094 6-32NC .120 .422
12 .7500-20UNEF .625 1.120 .860 1.931 .750 .807 .812 1.094 6-32NC .120 .672
14S .8750-20UNEF .450 1.307 .672 1.588 .562 .932 .906 1.188 6-32NC .120 .422
14 .8750-20UNEF .625 1.307 .860 1.931 .750 .932 .906 1.188 6-32NC .120 .672
16S 1.0000-20UNEF .450 1.432 .672 1.588 .562 1.057 .969 1.281 6-32NC .120 .422
16 1.0000-20UNEF .625 1.432 .860 1.931 .750 1.057 .969 1.281 6-32NC .120 .672
18 1.1250-18NEF .625 1.557 .891 1.931 .750 1.182 1.063 1.375 6-32NC .120 .641*
20 1.2500-18NEF .625 1.744 .891 1.931 .750 1.291 1.156 1.500 8-32NC .120 .641*
22 1.3750-18NEF .625 1.869 .891 1.931 .750 1.432 1.250 1.625 8-32NC .120 .641*
24 1.5000-18NEF .625 1.994 .953 2.009 .812 1.557 1.375 1.750 8-32NC .147 .578*
28 1.7500-18NS .625 2.166 .953 2.009 .812 1.807 1.562 2.000 8-32NC .147 .578*
32 2.0000-18NS .625 2.541 1.031 2.072 .875 2.057 1.750 2.250 10-32NF .173 .500*
36 2.2500-16UN .625 2.729 1.031 2.072 .875 2.260 1.938 2.500 10-32NF .173 .500*
40 2.5000-16UN .625 2.979 1.031 2.072 .875 2.260 2.510 2.750 10-32NF .173 .500*
MS/Standard
MS3100R
wall mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
H
Dia.
Max.
K
+.020
–.010
L
Max.
M
+.010
–.000
P
Dia.
Max.
R
±.005
S
±.031
Y
Thread
Class 2
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .959 .672 1.588 .562 .557 .594 .875 6-32NC .120 .422
10S .6250-24NEF .391 1.026 .672 1.588 .562 .682 .719 1.000 6-32NC .120 .422
10SL .6250-24NEF .391 1.120 .672 1.588 .562 .807 .719 1.000 6-32NC .120 .422
12S .7500-20UNEF .450 1.120 .672 1.588 .562 .807 .812 1.094 6-32NC .120 .422
12 .7500-20UNEF .625 1.120 .860 1.931 .750 .807 .812 1.094 6-32NC .120 .672
14S .8750-20UNEF .450 1.307 .672 1.588 .562 .932 .906 1.188 6-32NC .120 .422
14 .8750-20UNEF .625 1.307 .860 1.931 .750 .932 .906 1.188 6-32NC .120 .672
16S 1.0000-20UNEF .450 1.432 .672 1.588 .562 1.057 .969 1.281 6-32NC .120 .422
16 1.0000-20UNEF .625 1.432 .860 1.931 .750 1.057 .969 1.281 6-32NC .120 .672
18 1.1250-18NEF .625 1.557 .891 1.931 .750 1.182 1.063 1.375 6-32NC .120 .641*
20 1.2500-18NEF .625 1.744 .891 1.931 .750 1.291 1.156 1.500 8-32NC .120 .641*
22 1.3750-18NEF .625 1.869 .891 1.931 .750 1.432 1.250 1.625 8-32NC .120 .641*
24 1.5000-18NEF .625 1.994 .953 2.009 .812 1.557 1.375 1.750 8-32NC .147 .578*
28 1.7500-18NS .625 2.166 .953 2.009 .812 1.807 1.562 2.000 8-32NC .147 .578*
32 2.0000-18NS .625 2.541 1.031 2.072 .875 2.057 1.750 2.250 10-32NF .173 .500*
36 2.2500-16UN .625 2.729 1.031 2.072 .875 2.260 1.938 2.500 10-32NF .173 .500*
40 2.5000-16UN .625 2.979 1.031 2.072 .875 2.260 2.510 2.750 10-32NF .173 .500*
MS/Standard
MS3100R
wall mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
22
18
L
Z
B
A
Thread
Y
Thread
F
J
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
F
Dia.
Max.
J
Dia.
Max.
L
Max.
Y
Thread
Class 2
Z
±.040
8S .5000-28UNEF .406 .959 .557 1.588 6-32NC 1.094
10S .6250-24NEF .406 1.026 .682 1.588 6-32NC 1.094
10SL .6250-24NEF .406 1.120 .807 1.588 6-32NC 1.094
12S .7500-20UNEF .422 1.120 .807 1.588 6-32NC 1.094
12 .7500-20UNEF .656 1.120 .807 1.931 6-32NC 1.532
14S .8750-20UNEF .391 1.307 .932 1.588 6-32NC 1.094
14 .8750-20UNEF .625 1.307 .932 1.931 6-32NC 1.532
16S 1.0000-20UNEF .391 1.432 1.057 1.588 6-32NC 1.094
16 1.0000-20UNEF .625 1.432 1.057 1.931 6-32NC 1.532
18 1.1250-18NEF .625 1.557 1.182 1.931 6-32NC 1.532*
20 1.2500-18NEF .625 1.744 1.291 1.931 8-32NC 1.532*
22 1.3750-18NEF .625 1.869 1.432 1.931 8-32NC 1.532*
24 1.5000-18NEF .625 1.994 1.557 2.009 8-32NC 1.532*
28 1.7500-18NS .625 2.166 1.807 2.009 8-32NC 1.532*
32 2.0000-18NS .625 2.541 2.057 2.072 10-32NF 1.532*
36 2.2500-16UN .625 2.729 2.260 2.072 10-32NF 1.532*
40 2.5000-16UN .625 2.979 2.510 2.072 10-32NF 1.532*
MS/Standard
MS3101R
cable connecting plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
F
Dia.
Max.
J
Dia.
Max.
L
Max.
Y
Thread
Class 2
Z
±.040
8S .5000-28UNEF .406 .959 .557 1.588 6-32NC 1.094
10S .6250-24NEF .406 1.026 .682 1.588 6-32NC 1.094
10SL .6250-24NEF .406 1.120 .807 1.588 6-32NC 1.094
12S .7500-20UNEF .422 1.120 .807 1.588 6-32NC 1.094
12 .7500-20UNEF .656 1.120 .807 1.931 6-32NC 1.532
14S .8750-20UNEF .391 1.307 .932 1.588 6-32NC 1.094
14 .8750-20UNEF .625 1.307 .932 1.931 6-32NC 1.532
16S 1.0000-20UNEF .391 1.432 1.057 1.588 6-32NC 1.094
16 1.0000-20UNEF .625 1.432 1.057 1.931 6-32NC 1.532
18 1.1250-18NEF .625 1.557 1.182 1.931 6-32NC 1.532*
20 1.2500-18NEF .625 1.744 1.291 1.931 8-32NC 1.532*
22 1.3750-18NEF .625 1.869 1.432 1.931 8-32NC 1.532*
24 1.5000-18NEF .625 1.994 1.557 2.009 8-32NC 1.532*
28 1.7500-18NS .625 2.166 1.807 2.009 8-32NC 1.532*
32 2.0000-18NS .625 2.541 2.057 2.072 10-32NF 1.532*
36 2.2500-16UN .625 2.729 2.260 2.072 10-32NF 1.532*
40 2.5000-16UN .625 2.979 2.510 2.072 10-32NF 1.532*
MS/Standard
MS3101R
inline receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
23
19
SR
T
4 Holes
S
RB
M
KZ
A
Thread
L
N
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578*
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
MS/Standard
MS3102R
box mounting receptacle
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
* Increase Z dimension by .312 for size “0” contact only.
Shell
Size
A
Thread
Class 2A
B
Min.
Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N
Dia.
+.010
–.000
R
±.005
S
±.031
T
Dia.
+.004
–.002
Z
+.050
–.060
8S .5000-28UNEF .391 .672 .297 .562 .375 .594 .875 .120 .422
10S .6250-24NEF .391 .672 .297 .562 .500 .719 1.000 .120 .422
10SL .6250-24NEF .391 .672 .297 .562 .625 .719 1.000 .120 .422
12S .7500-20UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .422
12 .7500-20UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .672
14S .8750-20UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .422
14 .8750-20UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .672
16S 1.0000-20UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .422
16 1.0000-20UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .672
18 1.1250-18NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .641*
20 1.2500-18NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .641*
22 1.3750-18NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .641*
24 1.5000-18NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .578*
28 1.7500-18NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .578*
32 2.0000-18NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .500*
36 2.2500-16UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .500*
40 2.5000-16UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .500*
MS/Standard
MS3102R
box mounting receptacle
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
* Increase Z dimension by .312 for size “0” contact only.
24
Shell
Size
A
Thread
Class 2B
F
Dia.
Max.
J
±.005
L
Max.
N
Dia.
Max.
Q
Dia.
Max.
Y
Thread
Class 2
Z
±.045
8S .5000-28UNEF .959 .531 1.057 .557 .741 6-32NC .562
10S .6250-24NEF 1.026 .531 1.057 .682 .869 6-32NC .562
10SL .6250-24NEF 1.120 .531 1.057 .807 .946 6-32NC .562
12S .7500-20UNEF 1.120 .531 1.057 .807 .995 6-32NC .562
12 .7500-20UNEF 1.120 .719 1.212 .807 .995 6-32NC .812
14S .8750-20UNEF 1.307 .531 1.057 .932 1.123 6-32NC .562
14 .8750-20UNEF 1.307 .719 1.212 .932 1.123 6-32NC .812
16S 1.0000-20UNEF 1.432 .531 1.057 1.057 1.250 6-32NC .562
16 1.0000-20UNEF 1.432 .719 1.212 1.057 1.250 6-32NC .812
18 1.1250-18NEF 1.557 .719 1.212 1.182 1.333 6-32NC .812*
20 1.2500-18NEF 1.744 .719 1.212 1.291 1.461 8-32NC .812*
22 1.3750-18NEF 1.869 .719 1.212 1.432 1.588 8-32NC .812*
24 1.5000-18NEF 1.994 .719 1.291 1.557 1.715 8-32NC .812*
28 1.7500-18NS 2.166 .719 1.291 1.807 1.968 8-32NC .812*
32 2.0000-18NS 2.541 .719 1.353 2.057 2.209 10-32NF .812*
36 2.2500-16UN 2.729 .719 1.353 2.260 2.463 10-32NF .812*
40 2.5000-16UN 2.979 .719 1.353 2.510 2.719 10-32NF .812*
MS/Standard
MS3106R
straight plug
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
20
Q
F
N
L
ZJ
A
Thread
Y
Shell
Size
A
Thread
Class 2B
F
Dia.
Max.
J
±.005
L
Max.
N
Dia.
Max.
Q
Dia.
Max.
Y
Thread
Class 2
Z
±.045
8S .5000-28UNEF .959 .531 1.057 .557 .741 6-32NC .562
10S .6250-24NEF 1.026 .531 1.057 .682 .869 6-32NC .562
10SL .6250-24NEF 1.120 .531 1.057 .807 .946 6-32NC .562
12S .7500-20UNEF 1.120 .531 1.057 .807 .995 6-32NC .562
12 .7500-20UNEF 1.120 .719 1.212 .807 .995 6-32NC .812
14S .8750-20UNEF 1.307 .531 1.057 .932 1.123 6-32NC .562
14 .8750-20UNEF 1.307 .719 1.212 .932 1.123 6-32NC .812
16S 1.0000-20UNEF 1.432 .531 1.057 1.057 1.250 6-32NC .562
16 1.0000-20UNEF 1.432 .719 1.212 1.057 1.250 6-32NC .812
18 1.1250-18NEF 1.557 .719 1.212 1.182 1.333 6-32NC .812*
20 1.2500-18NEF 1.744 .719 1.212 1.291 1.461 8-32NC .812*
22 1.3750-18NEF 1.869 .719 1.212 1.432 1.588 8-32NC .812*
24 1.5000-18NEF 1.994 .719 1.291 1.557 1.715 8-32NC .812*
28 1.7500-18NS 2.166 .719 1.291 1.807 1.968 8-32NC .812*
32 2.0000-18NS 2.541 .719 1.353 2.057 2.209 10-32NF .812*
36 2.2500-16UN 2.729 .719 1.353 2.260 2.463 10-32NF .812*
40 2.5000-16UN 2.979 .719 1.353 2.510 2.719 10-32NF .812*
MS/Standard
MS3106R
straight plug
To complete order number, see “how to order” pg. 70.
For solder well data, see page 67.
All lockwire holes are .045 dia. min.
* Increase Z dimension by .312 for size “0” contact only.
25
AC Series/MS
insert availability
Insert Service Total Contact Size
Arrangement Rating Contacts 0 4 8 12 16
18-30 A 5 5
18-31 A 5 5
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 D/A 8 1 7
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
Insert Service Total Contact Size
Arrangement Rating Contacts 0 4 8 12 16
10SL-3 A 3 3
10SL-4† A 2 2
12S-3 A 2 2
12S-4 D 1 1
12-5 D 1 1
14S-1 A 3 3
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14S-A7 A 7 7
14-3 A 1 1
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
16-59 A 4 4
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identied with an asterisk
(*) are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
26
AC Series/MS
insert availability, cont.
Contact Size
Insert Total
Arrange Service Con- Coax**
ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12
28-3 E 3 3
28-4 E/D 9 2 7
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 6 6
28-10 D/A 7 2 2 3
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/Inst. 12 12
28-19 B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
28-AY A 9 4 5
32-1 E/D 5 2 3
32-2 E 5 3 2
32-3 D 9 1 2 2 4
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 E/B/D/A 7 2 2 3
32-12 A/D 15 5 10
32-13 D 23 5 18
32-14 D 13 13
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-22 A 54 54
32-25 A 25 25
32-31 A 31 31
32-48 Inst. 48 48
32-52 D 8 2 6
32-53 Inst./E 42 5 37
Contact Size
Insert Total
Arrange Service Con- Coax**
ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
22-33 D/A 7 7
22-34 D 5 3 2
22-36 D/A 8 8
22-63 A 12 4 8
22-65 D/A 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 1 3 3
24-17 D 5 2 3
24-19 A 12 12
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
24-51 A 5 5
24-52 Hi-Volt 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
24-96 Inst. 28 28
24-AJ A 25 25
28-1 D/A 9 3 6
28-2 D 14 2 12
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identied with an asterisk
(*) are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
27
AC Series/MS
insert availability, cont.
Contact Size
Insert Total
Arrange Service Con- Coax**
ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-59 A 42 40 2
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
32-82 A 16 4 12
32-AF A 55 55
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 5 5 6
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-51 D 4 2 2
36-52 A 52 52
36-54 A 39 8 31
36-55 A 39 8*
31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
Contact Size
Insert Total
Arrange Service Con- Coax**
ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12
36-83 Coax 7 7
36-85 A/D 35 35*
36-97 C 1 1
36-99 D 12 3 3 3 3
36-AF A 48 48
40-1 D 30 6 24
40-5 A 5 5
40-9 A 47 1 22 24
40-10 A 29 4 9 16
40-30 A 30 1 29
40-35 D 35 35
40-53 A 60 60
40-56 A 85 85
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60
40-86 E 4 4
40-87 D 7 7
40-AD A 8 4 4
40-AG A 38 38
40-AP E 2 2
40-AR Inst. 13 3 3 7
40-AS A 40 25 15
40-AT A 43 1 24 18
40-AU A 14 3 10 1
40-AV D 3 3
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identied with an asterisk (*)
are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
28
AC Series/MS
insert alternate positioning
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate rotations are available as indicated in
the accompanying charts.
As shown in the diagram below, the front face of the pin insert
is rotated within the shell in a clockwise direction from the
normal shell key. The socket insert would be rotated counter-
clockwise the same number of degrees in respect to the
normal shell key.
The following insert arrangements have the same alternate
insert rotations for W, X, Y and Z, which are:
Degrees
W X Y Z
80 110 250 280
16-7 20-20 22-21 24-7 28-8 32-1 36-1
18-5 20-22 22-24 24-12 28-9 32-3 36-7
18-9 22-3 22-25 24-14 28-10 32-4 36-8
18-13 22-6 22-29 24-16 28-11 32-6 36-13
18-14 22-12 22-33 24-17 28-14 32-9 40-AR
20-7 22-14 22-34 24-20 28-15 32-10 40-AS
20-8 22-15 24-1 24-21 28-16 32-12 40-AT
20-9 22-16 24-3 24-28 28-17 32-13 40-AU
20-12 22-17 24-4 24-AJ 28-19 32-22
20-14 22-18 24-5 28-1 28-20 32-31
20-16 22-19 24-6 28-4 28-21 32-AF
Position W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
A
B
AB
A
B
A
B
Insert Degrees
Arrangement W X Y Z
10-SL-4 63 – – –
12S-3 70 145 215 290
14S-2 – 120 240 –
14S-5 – 110 – –
14S-7 90 180 270 –
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270 –
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 – – 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270 –
16S-8 – 170 265 –
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 – – 290
18-10 – 120 240 –
18-11 – 170 265 –
18-12 80 – – 280
18-15 – 120 240 –
18-20 90 180 270 –
18-22 70 145 215 290
18-29 90 180 270 –
20-3 70 145 215 290
20-4 45 110 250 –
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 – – 280
20-17 90 180 270 –
20-18 35 110 250 325
Insert Degrees
Arrangement W X Y Z
20-19 90 180 270 –
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 – – 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 – 110 250 –
22-23 35 – 250 –
22-27 80 – 250 280
22-28 80 – – 280
22-63 20 – – –
24-2 80 – – 280
24-9 35 110 250 325
24-10 80 – – 280
24-11 35 110 250 325
24-22 45 110 250 –
24-27 80 – – 280
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
28-7 35 110 250 325
28-12 90 180 270 –
Insert Degrees
Arrangement W X Y Z
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250 –
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-14 65 130 230 295
32-15 35 110 250 280
32-17 45 110 250 –
32-25 60 120 – –
32-48 80 – – –
32-64 80 100 110 250
32-68 30 – – –
32-82 30 – – –
36-3 70 145 215 290
36-4 70 145 215 290
36-5 – 120 240 –
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270 –
36-15 60 125 245 305
36-AF 65 – – –
40-1 65 130 235 300
40-5 33 – – 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-AD 45 – – –
40-AG 37 74 285 322
40-AP 35 110 250 325
40-AV 90 180 270 –
Part Pin/ Mating End Wire Barrel Allowable Test Current**
Number Socket Size Size Wire Size Amps
10-40569 Pin 16 13
16 Short† 16 18 10
10-597107-161 Socket 20 7.5
or 10-597424-001 22 5
10-40599 Pin 16 13
16 Long 16 18 10
10-597107-171 Socket 20 7.5
or 10-597422-001 22 5
10-33646 Pin
12 12 12 23
10-597107-131 Socket 14 17
10-35531 Pin
8 8 8 46
10-35532 Socket 10 33
10-35529 Pin
4 4 4 80
10-35530 Socket 6 60
10-35527 Pin 0 150
0 0 1 125
10-35528 Socket 2 100
29
CONTACT ARRANGEMENT
SERVICE RATING
Recommended Effective
M S
Operating Voltage* Creepage Mechanical
Service at Sea Level Distance Spacing
Rating D C AC (RMS) Nom. Nom.
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
AC Series/MS
solder contacts
Machined copper alloy contacts in a full range of sizes, with closed entry socket design in
the size 12 and 16 contacts. A heavy silver-plated nish is deposited on all solder contacts
for maximum corrosion resistance, maximum current car rying capacity and low millivolt drop.
* Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching surges, transients, etc. can be expected in a particular circuit.
† The 10SL, 12S, 14S and 16S connectors require short contacts.
* The values listed in Table I represent operating val ues
which include a generous safety factor. It may be nec-
essary for some applications to exceed the operating
voltages listed here. If this is necessary, designers will
nd Table II useful for determining the degree to which
the recommended values of Table I can be exceeded.
† Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own
oper ating voltage by the application of a safety factor to the above derating chart to compensate for circuit
tran sients, surges, etc.
Nominal Standard Sea Pressure Altitude † Pressure Altitude†
Distance Level Conditions 50,000 Feet 70,000 Feet
Minimum Minimum Minimum
MS Flashover Test Flashover Test Flashover Test
Service Voltage Voltage Voltage Voltage Voltage Voltage
Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
ALTITUDE VOLTAGE
DERATING** CHART
SOLDER CONTACTS*
Part Pin/ Mating End Wire Barrel Allowable Test Current**
Number Socket Size Size Wire Size Amps
10-40569 Pin 16 13
16 Short† 16 18 10
10-597107-161 Socket 20 7.5
or 10-597424-001 22 5
10-40599 Pin 16 13
16 Long 16 18 10
10-597107-171 Socket 20 7.5
or 10-597422-001 22 5
10-33646 Pin
12 12 12 23
10-597107-131 Socket 14 17
10-35531 Pin
8 8 8 46
10-35532 Socket 10 33
10-35529 Pin
4 4 4 80
10-35530 Socket 6 60
10-35527 Pin 0 150
0 0 1 125
10-35528 Socket 2 100
30
AC Series/MS
crimp contacts
* When using wire adapter sleeve shown
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching surges, transients, etc. can be expected in a particular circuit.
† The 10SL, 12S, 14S and 16S connectors require short contacts.
Additional contact variations are available; consult Amphenol, Sidney NY for information.
† Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
oper ating voltage by the application of a safety factor to the above derating chart to compensate for circuit
tran sients, surges, etc.
CRIMP CONTACTS*
Part Pin/ Mating End Wire Barrel Allowable Required Wire Test Current**
Number Socket Size Size Wire Size Adapter Sleeve Amps
10-40553 Pin 16 – 13
16 Short† 16 18 – 10
10-597109-161 Socket 20 – 7.5
22* 10-74696-6 5
10-40557 Pin 16 – 13
16 Long 16 18 – 10
10-597109-171 Socket 20 – 7.5
22* 10-74696-6 5
10-40561 Pin
12 12 12 – 23
10-597109-131 Socket 14 – 17
10-40792 Pin
8 8 8 – 46
10-40793 Socket 10* 10-74696-1 33
10-40564 Pin
4 4 4 – 80
10-40565 Socket 6* 10-74696-2 60
10-581806-000 Pin
0 0 0 – 150
10-581808-000 Socket 2* 10-74696-7 125
Machined from copper alloys and silver-plated for maximum corrosion resistance, with a
minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket
contacts are of the closed entry design. Crimp contacts are available for all insert arrange-
ments and are identied with a Amphenol® proprietary number. Gold plated contacts are also
available. (See how to order on page 59).
Nominal Standard Sea Pressure Altitude † Pressure Altitude†
Distance Level Conditions 50,000 Feet 70,000 Feet
Minimum Minimum Minimum
MS Flashover Test Flashover Test Flashover Test
Service Voltage Voltage Voltage Voltage Voltage Voltage
Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
ALTITUDE VOLTAGE
DERATING** CHART
CONTACT ARRANGEMENT
SERVICE RATING
Recommended Effective
M S
Operating Voltage* Creepage Mechanical
Service at Sea Level Distance Spacing
Rating D C AC (RMS) Nom. Nom.
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
31
RADSOK® Technology
RADSOK® Technology Advantages
RADSOK’S twisted grid conguration allows for 50% more current
to pass through the same size pin, while providing increased
reliability, ampacity and cycle durability as well as lower insertion
force, T-rise and voltage drop.
• HIGH RELIABILITY
Unique RADSOK® design and construction technology create
an electrical contact interface that exceeds typical interconnect
requirements. Applications in aerospace, medical, industrial,
automotive, mining, offshore, and other harsh environments
depend on the high reliability of Amphenol’s RADSOK® technology.
• LOW CONTACT ENGAGEMENT/SEPARATION FORCES
The hyperbolic lamella socket contact construction distributes
normal forces over a high percentage of the mating pin surface.
This creates a smooth, even engagement effort. This force
distribution also contributes to excellent performance in vibration
applications with resistance to typical fretting corrosion.
• LOW CONTACT RESISTANCE
The large interface area between the socket lamella and pin
surface result in very low contact resistance, enabling the
RADSOK® contacts’ high current ratings compared to traditional
power contact designs.
• HIGH MATING CYCLE DURABILITY
RADSOK® contacts with typical silver plating nishes have
demonstrated survival of 20,000 mating cycles. Specialized
plating and contact lubricants can extend cycle life to 200,000
matings or higher. Even with continuous exposure to harsh
environmental abuse (salt, sand, and high humidity), RADSOK®
contacts have been tested to maintain low contact resistance
beyond 10,000 mating cycles.
CRIMP CONTACT DATA
RADSOK® Part Number
Mating
Size
Wire
Barrell Size
Allowable
Wire Size
Required Wire
Adapter Sleeve
Test Current**
AMPS
Socket Contact
Silver Gold
10-639140-121 10-639140-1231 12 12-14 12
14
-
-
35
***
10-639140-081 10-639140-0831 8 8 8
10*
-
10-74696-1
70
***
10-639140-041 10-639140-0431 4 4 4
6*
-
10-74696-2
120
***
10-639140-001 10-639140-0031 0 0 0
2*
-
10-74696-7
250
***
RADSOK® Derating Chart –
Temperature vs. Current
Based on single conductors in free air. Wire
cross-section same size as pin contact cross-
sectional area.
RADSOK® Socket Table
* When using wire adapter sleeve shown
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical
data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching
surges, transients, etc. can be expected in a particular circuit.
*** Consult Amphenol Industrial for test current at these wire sizes.
32
Insert Arrangement 10SL-3 10SL-4 12S-3 12S-4 12-5 14S-1 14S-2
Service Rating A A A D D A Inst.
Number of Contacts 3 2 2 1 1 3 4
Contact Size 16 16 16 16 12 16 16
Front of Front of
Socket Insert Socket Insert
Insert Arrangement 14S-4 14S-5 14S-6 14S-7 14S-9 14S-10
Service Rating D Inst. Inst. A A Inst.
Number of Contacts 1 5 6 3 2 4
Contact Size 16 16 16 16 16 16
100° Rotation
of 14S-2
Insert Arrangement 14S-12 14S-A7 14-3 16S-1 16S-3 16S-4
Service Rating A A A A B D
Number of Contacts 3 7 1 7 1 2
Contact Size 16 16 8 16 16 16
Insert Arrangement 16S-5 16S-6 16S-8 16-2 16-7 16-9
Service Rating A A A E A A
Number of Contacts 3 3 5 1 1 2 2 2
Contact Size 16 16 16 12 8 16 12 16
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 14S-7
33
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 16-10 16-11 16-12 16-13 16-59 18-1
Service Rating A A A A A B, C, F, G = A; bal. = Inst.
Number of Contacts 3 2 1 2* 4 10
Contact Size 12 12 4 12 12 16
Insert Arrangement 18-3 18-4 18-5 18-6 18-7 18-8
Service Rating D D D D B A
Number of Contacts 2 4 2 1 1 1 1 7
Contact Size 12 16 12 16 4 8 12 16
Insert Arrangement 18-9 18-10 18-11 18-12 1 8-13 18-14
Service Rating Inst. A A A A A
Number of Contacts 2 5 4 5 6 1 3 1 1
Contact Size 12 16 12 12 16 8 12 4 16
Insert Arrangement 18-15 18-16 18-17 18-19 18-20 18-22
Service Rating A C Inst. A A D
Number of Contacts 4** 1 2 5 10 5 3
Contact Size 12 12 12 16 16 16 16
CONTACT LEGEND 16 12 8 4 0
*A = Iron: B = Constantan
**A, C = Iron; B, D = Constantan
34
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 18-24 18-29 18-30 18-31 20-2 20-3
Service Rating B, C, F, G = A; Bal. = Inst. A A A D D
Number of Contacts 10 5 5 5 1 3
Contact Size 16 16 16 16 0 12
250° Rotation 110° Rotation 260° Rotation
of 18-1 of 18-20 of 18-20
250˚
A
B
C
D
E
F
G
H
I
J
Insert Arrangement 20-4 20-6 20-7 20-8 20-9 20-11
Service Rating D D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A Inst.
Number of Contacts 4 3 8 2 4 1 7 13
Contact Size 12 16 16 8 16 12 16 16
Insert Arrangement 20-12 20-14 20-15 20-16 20-17 20-18
Service Rating A A A A A A
Number of Contacts 1 1 2 3 7 2 7 5 1 3 6
Contact Size 4 16 8 12 12 12 16 12 16 12
16
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
35
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 20-19 20-20 20-21 20-22 20-23 20-24
Service Rating A A A A A A
Number of Contacts 3 1 3 1 8 3 3 2 2 2
Contact Size 8 4 12 12 16 8 16 8 8 16
Insert Arrangement 20-25 20-27 20-29 20-30 20-33 20-51
Service Rating Inst. A A Inst. A A
Number of Contacts 13 14 17 13 11 3*
Contact Size 16 16 16 16 16 8
100° Rotation 250° Rotation
of 20-11 of 20-11
100˚
A
BC
D
E
F
GH
J
K
L
M
N
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
250˚
A
BC
D
E
F
GH
J
K
L
M
N
Insert Arrangement 20-57 20-58 20-59 20-66 20-79
Service Rating A A A A H = D; Bal. = A
Number of Contacts 7* 5 5 3* 1 5 7* 1*
Contact Size 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire 16 12 for #10 wire 16 12 for #16 wire
36
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 22-1 22-2 22-4 22-5 22-6 22-7
Service Rating D D A D D E
Number of Contacts 2 3 2 2 2 4 2 1 1
Contact Size 8 8 8 12 12 16 8 16 0
Insert Arrangement 22-8 22-9 22-10 22-11 22-12 22-13
Service Rating E E E B D E = D; A, B, C, D = A
Number of Contacts 2 3 4 2 2 3 4 1
Contact Size 12 12 16 16 8 16 12 16
Insert Arrangement 22-14 22-15 22-16 22-17 22-18
Service Rating A D = E; A, B, C, E, F = A A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A
Number of Contacts 19 5 1 3 6 1 8 8
Contact Size 16 12 16 12 16 12 16 16
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
C
D
E
F
G
H
37
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 22-19 22-20 22-21 22-22 22-23
Service Rating A A A A H =D; Bal = A
Number of Contacts 14 9 1 2 4 8
Contact Size 16 16 0 16 8 12
Insert Arrangement 22-24 22-27 22-28 22-33 22-34
Service Rating C, D, E = D; A, B, F = A J = D; Bal. = A A A, B, C, D = D; E, F, G = A D
Number of Contacts 2 4 1 8 7 7 3 2
Contact Size 12 16 8 16 12 16 12 16
Insert Arrangement 22-36 22-63 22-65 22-70 22-80
Service Rating H = D; Bal. = A** A H = D; Bal. = A A A
Number of Contacts 8 4 8 8* 8 5 3*
Contact Size 12 12 16 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire
A
B
C
D
E
F
G
H
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
D
E
F
G
H
J
KL
M
N
P
* Solderless
** A, C, E, G = Iron
B, D, F, H = Constantan
38
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 24-2 24-3 24-5 24-6 24-7
Service Rating D D A A, G, H = D; Bal. = A A
Number of Contacts 7 2 5 16 8 2 14
Contact Size 12 12 16 16 12 12 16
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
P
S
R
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
AB
Insert Arrangement 24-9 24-10 24-11 24-12 24-16
Service Rating A A A A A, B, F, G = D; C, D, E = A
Number of Contacts 2 7 3 6 2 3 1 3 3
Contact Size 4 8 8 12 4 12 8 12 16
A
B
CD
E
F
G
ABC
DEF
G
H
I
A
B
C
D
E
A
B
C
D
E
F
G
AB
C
D
E
Insert Arrangement 24-17 24-19 24-20 24-21 24-22
Service Rating D A D D D
Number of Contacts 2 3 12 2 9 1 9 4
Contact Size 12 16 16 12 16 8 16 8
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
F
G
H
JK
A
BC
D
A
B
C
D
E
F
G
A
B
C
D
E
FH
J
K
L
M
N
39
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 24-27 24-28 24-51 24-52 24-53
Service Rating E Inst. A Hi-Volt A
Number of Contacts 7 24 5* 1 5*
Contact Size 16 16 B, E for AN#10 or 12 wire 12 8
A, C, D for AN #8 wire
A
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
H
J
K
LM
N
P
R
A
B
CD
E
F
G
Insert Arrangement 24-58 24-59 24-60 24-65 24-66
Service Rating A A A A D
Number of Contacts 3 3 7 7 7 7* 11 4 7
Contact Size 8 12 16 12 16 8 for #10 or 12 wire 12 16 12
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
A
B
CD
E
F
G
A
B
CD
E
F
G
Insert Arrangement 24-67 24-71 24-75 24-79 24-80
Service Rating Inst. A A A Inst.
Number of Contacts 19 2* 5* 5 2 5 23
Contact Size 12 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16
A
B
C
D
E
ABCD
EFGH J
KLMNPQ
RSTUV
WX Z
A
B
C
D
E
F
G
ABCD
EFGH J
KL
MNPQ
RSTUV
WX YZ
A
B
C
D
E
40
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 24-84 24-96 24-AJ 28-1 28-2
Service Rating A Inst. A A, J, E = D; Bal. = A D
Number of Contacts 1 18 28 25 3 6 2 12
Contact Size 12 12 (Coax) 16 16 8 12 12 16
RG-188/U
or RG-174/U
AB
CD
P
S
EFG
A
B
CD
E
A
BC
AB
A
B
C
D
E
F
G
H
J
K
L
M
Insert Arrangement 28-3 28-4 28-5 28-6 28-7
Service Rating E G, P, S = E; Bal. = D D D D
Number of Contacts 3 2 7 2 1 2 3 2
Contact Size 8 12 16 4 12 16 4 4
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
G
Insert Arrangement 28-8 28-9 28-10 28-11 28-12
Service Rating L, M = E; B = D; Bal. = A D G = D; Bal. = A A A
Number of Contacts 2 10 6 6 2 2 3 4 18 26
Contact Size 12 16 12 16 4 8 12 12 16 16
A
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
ABCD
EFGHJ
KLMNPQ
RS
T
UV
WXZ
Y
a
41
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 28-13 28-15 28-16 28-17
Service Rating A A A R = B; M, N, P = D; A to L = A
Number of Contacts 26 35 20 15
Contact Size 16 16 16 16
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
Insert Arrangement 28-18 28-19 28-20
Service Rating M = C; G, H, J, K, L = D; A, B = A; Bal = Inst. H, M = B; A, B = D; Bal.= A A
Number of Contacts 12 4 6 10 4
Contact Size 16 12 16 12 16
A
B
C
D
E
F
G
H
J
K
L
M
N
P
A
BC
D
EFGHJ
KLMNPR
STUVWXZ
abcdef
ghjkm
nprs
A
B
C
DE
F
A
B
C
D
E
F
H
J
K
L
M
N
Insert Arrangement 28-21 28-22 28-51 28-59
Service Rating A D A A
Number of Contacts 37 3 3 12 7 10
Contact Size 16 4 16 12 12 16
AB CD
EFH
JK
LMN
PR STU
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
AB
CDEFG
HJKLM
PRS T
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
100° Rotation
of 28-12
42
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 28-66 28-72 28-74 28-75
Service Rating A – A A
Number of Contacts 2 14 3 9* 4* 3* 9* 7*
Contact Size 8 12 4 (Coax) RG-59 A/U 16 8 8 for #10 wire 16 8 for #10 wire
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
12
3
45
6
A
B
C
DE
F
G
H
I
A
BC
DE F
GH
J
Insert Arrangement 28-79 28-82 28-84 28-AY
Service Rating A D A A
Number of Contacts 9 7 2 4 9 4 5
Contact Size 16 8 8 12 8 4 16
A
B
CD
E
A
B
C
D
E
A
B
C
DEF
G
H
J
A
B
C
D
E
F
G
H
J
K
L
M
N
O
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
Insert Arrangement 32-1 32-2 32-3 32-4
Service Rating A = E; B, C, D, E = D E D F, J, K, N = A; Bal. =
D
Number of Contacts 2 3 3 2 1 2 2 4 2 12
43
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 32-9 32-10 32-12 32-13
Service Rating D A, F = E; G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D D
Number of Contacts 2 12 2 2 3 5 10 5 18
Contact Size 4 16 4 8 16 12 16 12 16
AB
CD EFG
HI JK
LMN
A
B
CD
E
F
G
AB
CD EFG
HJK
LM
OP
N
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
Insert Arrangement 32-14 32-15 32-16 32-17
Service Rating D D A D
Number of Contacts 13 2 6 2 3 2 16 4
Contact Size 12 0 12 4 8 12 16 4
A
BC
DE
F
G
H
100° Rotation
of 32-6
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
A
BC
D
A
B
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
Insert Arrangement 32-5 32-6 32-7 32-8
Service Rating D A A, B, h, j = Inst.; Bal = A A
Number of Contacts 2 2 3 2 16 7 28 6 24
Contact Size 0 4 8 12 16 12 16 12 16
1
10
9
8
7
6
5
4
2
11
1312
3
44
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 32-52 32-53 32-56 32-57
Service Rating D t, u = E; Bal = Inst. A **
Number of Contacts 2 6 5 37 24 6 6 2
Contact Size 0 12 12 16 16 12 for #10 wire 12 0 (Coax) RG-71/U
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
BC
DE
F
G
H
A
BC
D
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
Insert Arrangement 32-58 32-59 32-60 32-62
Service Rating – A A **
Number of Contacts 4 40 2 15 8 2 1 2 16 2
Contact Size 4 (Coax) RG-161/U 16 8 (Coax) RG-161/U 16 8 (Coax) 4 8 12 16 8 (Coax)
or RG-179/U RG-124/U RG-124/U16
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
90˚
A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
Insert Arrangement 32-22 32-25 32-31 32-48
Service Rating A A A Inst.
Number of Contacts 54 25 31 48
Contact Size 16 12 16 16
AB
CDEFH
JKLMNP
RSTUVWX
YZ
abcdf g
hi jkmn p
qrstuv
wxyzAA
BB CC
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
XY
T
U
Z
a
b
c
d
f
g
h
i
j
k
m
n
pq
w
vst
100° Rotation
45
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 36-1 36-3 36-4 36-5
Service Rating D D A = D; B, C = A A
Number of Contacts 4 18 3 3 3 4
Contact Size 12 16 0 12 0 0
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
mpr
tuv
w
sxy
z
q
AA
AB AC
AD AE
AF AG
AH
ABC
DE FGH
IJKLMN
OP RST
UVW
A
B
C
D
E
F
A
BC
A
B
C
D
Insert Arrangement 32-76 32-79 32-82 32-AF
Service Rating A D A A
Number of Contacts 19 4 1 12 4 55
Contact Size 12 4 8 16 4 16
1
2
3
4
5
67
89
12 3
4567
8910 11 12
13 14 15 16
17 18 19
A
BC
D
E
AB
CDE
FG H
J
KLM
NP
QR
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcd e f
ghjk
mnpr
t u v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
KLM
NP
QR
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Insert Arrangement 32-64 32-68 32-73 32-75
Service Rating Inst. A A 8, 9 = D
Number of Contacts 54 12 4 46 2 7
Contact Size 16 16 4 (Coax) RG-58 C/U 16 12 8 (Coax)
RG-180 B/U
46
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
Insert Arrangement 36-6 36-7 36-8 36-9
Service Rating A A A A
Number of Contacts 2 4 7 40 1 46 1 2 14 14
Contact Size 0 4 12 16 12 16 4 8 12 16
Insert Arrangement 36-10 36-11 36-12 36-13
Service Rating A A A N, P, Q = E; Bal. = A
Number of Contacts 48 48 48 2 15
Contact Size 16 16 16 12 16
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD EFG
HJKLMN
OPQR STU
VWXYZabc
de fg hj k
mnpr
tuvw
s
x
yz
q
100˚
AB
CD EFG
HJKLMN
OPQRSTU
VWXY Zabc
def g hj k
mnpr
tuvw
s
x
yz
q
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWXY Zabc
defghjk
mnpr
tu vw
s
x
yz
q
100° Rotation 110° Rotation
of 36-10 of 36-10
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
Insert Arrangement 36-14 36-15 36-16
Service Rating D M = D; Bal. = A
A
Number of Contacts 5 5 6 35 7 40
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100° Rotation
of 36-7
47
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 36-55 36-59 36-60
Service Rating A A **
Number of Contacts 31 8 50 3 40 7
Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
ABC
D
EF HJK
LMNPRST
U
VWXYZab
cdfghijk
mn prt
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
Insert Arrangement 36-17 36-18 36-20
Service Rating A A A
Number of Contacts 7 40 1 2 14 14 2 2 30
Contact Size 12 16 4 8 12 16 8 12 16
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
110° Rotation 100° Rotation
of 36-7 of 36-9
AB
CD EFG
HJKLMN
PRSTUV W
XYZabc
def g
hj
km
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
Insert Arrangement 36-51 36-52 36-54
Service Rating D A A
Number of Contacts 2 2 52 8 31
Contact Size 0 4 16 8 16
A
B
CD
ABC
D
EFHJ
K
LM NPRS
TUVWXY Z
abcdfghi
jkmn pr
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
48
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 36-64 36-65 36-71
Service Rating – – A
Number of Contacts 4 4 3 50
Contact Size 0 (Coax) RG-11/U, 0 (Coax) RG-59/U, RG-62/U 12 16
RG-12/U or RG-13/U or RG-71/U
A
B
C
D
A
B
C
D
ABC
D
EF HJK
LMNPRST
U
VWXYZab
cdfghijk
mn prt
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
Insert Arrangement 36-73 36-74 36-75
Service Rating – A A
Number of Contacts 7 43 1 48
Contact Size 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/U 16 for #14 wire
A
B
C
D
E
F
G
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
Insert Arrangement 36-76 36-77 36-78
Service Rating A D A
Number of Contacts 47 7 2 12
Contact Size 16 4 16 8
12
3
45
67 8
9101112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
49
CONTACT LEGEND 16 12 8 4 0
A
B
GC
N
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 36-79 36-80 36-83
Service Rating A A –
Number of Contacts 20 20 7
Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U
1
23 45
678910
11 12 13 14 15
16 17 18 19
20
1
23 45
678910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
Insert Arrangement 36-85 36-97 36-99
Service Rating M = D; Bal. = A C D
Number of Contacts 35 1 3 3 3 3
Contact Size 16 for #12 wire 4/0 4 8 12 16
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
ABC
DE FG
HI JKL
MNOPRS
TU VWX
YZ ab
cde
Insert Arrangement 36-AF 40-1 40-5
Service Rating A D A
Number of Contacts 48 6 24 5
Contact Size 16 12 16 0
1
2
3
4
5
6
7
8
9
10
11
12
CONTACT LEGEND 16 12 8 4 0 2/0 4/0
50
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 40-9 40-10 40-30
Service Rating A A A
Number of Contacts 1 22 24 4 9 16 29 1
Contact Size 8 12 16 4 8 16 12 4
AB
CDE
F
GHIJ
KL
MN OPQ
RST
UVWXYZa
bcd
efg h i
jk
lm
n
p
r
tu
s
o
q
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
Insert Arrangement 40-35 40-53 40-56
Service Rating D A A
Number of Contacts 35 60 85
Contact Size 12 16 16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
ABCD
EF HJ KLM
NPRSTUVW
XYZabcdfg
hijkmn pr
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
Insert Arrangement 40-57 40-61 40-62
Service Rating E A A
Number of Contacts 4 1 3 55 60
Contact Size 0 8 12 16 16
1
2
3
4
12
34567
8910 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
51
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 40-63 40-64 40-66
Service Rating A – –
Number of Contacts 61 3 20 13 4
Contact Size 16 for #14 wire 12 16 8 (Coax) RG-124/U 0 (Coax) RG-63B/U
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
1
2
3
4
Insert Arrangement 40-67 40-68 40-70
Service Rating A A A
Number of Contacts 1 10 21 61
Contact Size 16 4 (Coax) RG-59/U 8 16
AB
CDE
FH J
KL
M
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
Insert Arrangement 40-72 40-73 40-74
Service Rating A A A
Number of Contacts 1 10 61 1 1 4
Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax)
RG-9B/U
AB
CDE
FH J
KL
M
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
1
2
34
5
6
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
52
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 40-75 40-80 40-81
Service Rating E A A
Number of Contacts 1 4 1 10 62
Contact Size 12 0 16 4 16 for #14 wire
1
2
3
4
5
AB
CDE
FH J
KL
M
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
Insert Arrangement 40-82 40-85 40-86
Service Rating A A –
Number of Contacts 62 60 4
Contact Size 16 16 for #14 wire 0 (Coax) RG-115A/U
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
Insert Arrangement 40-87 40-AD 40-AG
Service Rating D A A
Number of Contacts 7 4 4 38
Contact Size 4 8 0 12
1
2
34
5
6
7
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
A
B
H
GC
D
E
F
CONTACT LEGEND 16 12 8 4 0 2/0 4/0
53
CONTACT LEGEND 16 12 8 4 0
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0 2/0 4/0
Insert Arrangement 40-AP 40-AR 40-AS
Service Rating E Inst. A
Number of Contacts 2 7 3 3 15 25
Contact Size 4/0 12 4 0 16 12
Insert Arrangement 40-AT 40-AU 40-AV
Service Rating A A D
Number of Contacts 24 18 1 3 10 1 3
Contact Size 12 16 8 4 8 16 2/0
AB
A
BC
D
E
F
G
H
J
K
L
M
N
1
2
3
45
6
7
89
10
11
12
13
14
15
16
17
18
19
20
21
2223
24
25
26
27
28
29
30 31 32
33
34 35 36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
23
24
25
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
34 39
A
B
C
D
E
F
G
H
J
K
L
M
N
P
AB
C
54
49
A complete line of cylindrical connectors containing ther-
mocouple insert arrangements is available. The contact
layout for a particular arrangement will be found in either
the MS/Standard contact arrangement section, pages
26-37, or the Special contact arrangement section, pages
38-48. All thermocouple contact layouts may contain
either iron, alumel, chromel, constantan, standard (cop-
per) or brass (dummy) contacts. See the thermocouple
tabulations on the following pages.
The following abbreviations are used in the contact mate-
rial column in the charts that follow. Also, thermocouple
contacts are color coded as shown. (This identification is
made by means of small dots of stain on the solder well
end of the contact).
Abbreviation Material Color Code
Ir. Iron Black
Con. Constantan Yellow
Cu. Copper Alloy N/A
Ch. Chromel White
Al. Alumel Green
Dummy Brass N/A
WIRE WELL DATA
Contact
Size
Well Inside Dia.
+.004
–.002
Well Depth
+.031
–.000
Solder Well
Barrel
Outside Dia.
12 .125 .250 .166 ±.003
16 .094 .188 .125
RECOMMENDED WIRE
I Chromel - Alumel Use wire in accordance
with MIL-W-5848
II Iron - Constantan Use wire in accordance
with MIL-W-5845
Thermocouple
contact availability
+.002
–.004
AC Series - Thermocouple
contact availability
A complete line of cylindrical connectors containing ther-
mocouple insert arrangements is available. The contact
layout for a particular arrangement will be found in either
the MS/Standard contact arrangement section, pages
32-53, or the Special contact arrangement section, pages
54-58. All thermocouple contact layouts may contain
either iron, alumel, chromel, constantan, standard (cop-
per) or brass (dummy) contacts. See the thermocouple
tabulations on the following pages.
55
50
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact
Size
Pin
Insert
Rotation
C W
Contact Material
12 16
10SL-51 10SL-4 2 2 45° A = Ir.; B = Con.
10SL-52 10SL-4 2 2 45° A = Cu.; B = Con.
10SL-53 10SL-4 2 2 45° A = Al.; B = Ch.
10SL-54 10SL-3 3 3 None A = Ir.; B = Con.; C = Cu.
10SL-55 10SL-3 3 3 None A = Al.; B = Ch.; C = Cu.
10SL-56 10SL-4 2 2 None A = Al.; B = Ch.
10SL-57 10SL-4 2 2 None A = Ch.; B = Con.
10SL-58 10SL-3 3 3 None A = Ch.; B = Al.; C = Cu.
10SL-59 10SL-4 2 2 None A = Ch.; B = Al.
10SL-60 10SL-4 2 2 None A = Ir.; B = Con.
10SL-61 10SL-4 2 2 None A = Cu.; B = Con.
10SL-62 10SL-3 3 3 None A = Cu.; B = Al.; C = Ir.
10SL-63 10SL-3 3 3 None A, C = Con.; B = Ch.
10SL-64 10SL-3 3 3 None A, C = Ch.; B = Al.
12S-51 12S-3 2 2 315° A = Ch.; B = Al.
12S-54 12S-3 2 2 315° A = Ir.; B = Con.
12S-55 12S-3 2 2 45° A = Cu.; B = Con.
12S-56 12S-3 2 2 None A = Al.; B = Ch.
12S-57 12S-3 2 2 60° A = Ch.; B = Al.
12S-58 12S-3 2 2 120° A = Ir.; B = Con.
12S-59 12S-3 2 2 None A = Ir.; B = Con.
12S-60 12S-3 2 2 None A = Cu.; B = Con.
12S-61 12S-3 2 2 None A = Ch.; B = Con.
12S-62 12S-3 2 2 None A = Ch.; B = Al.
14S-51 14S-9 2 2 90° A = Al.; B = Ch.
14S-52 14S-2 4 4 45° A, B = Cu.; C = Al.; D = Ch.
14S-53 14S-9 2 2 90° A = Ir.; B = Con.
14S-54 14S-6 6 6 45° A, C, E = Ir.; B, D, F = Con.
14S-55 14S-2 4 4 45° A, C = Ir.; B, D = Con.
14S-56 14S-2 4 4 45° A = Ir.; B = Con.; C, D = Cu.
14S-57 14S-2 4 4 45° A, C = Al.; B, D = Ch.
14S-58 14S-7 3 3 45° A = Al.; B = Ch.; C = Cu.
14S-59 14S-9 2 2 90° A = Cu.; B = Con.
14S-60 14S-9 2 2 None A = Al.; B = Ch.
14S-61 14S-6 6 6 45° A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
14S-63 14S-6 6 6 None A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
14S-64 14S-2 4 4 None A, C = Con.; B, D = Cu.
14S-65 14S-6 6 6 None A, C., E = Cu.; B, D, F = Con.
14S-67 14S-6 6 6 None A = Al.; B = Ch.; Balance = Cu.
14S-68 14S-2 4 4 45° A = Ch.; B = Con.; C, D = Cu.
14S-69 14S-7 3 3 None A = Con.; B = Ch.; C = Cu.
14S-70 14S-2 4 4 None A, D = Ch.; B, C = Al.
14S-71 14S-2 4 4 None A, B, D = Cu.; C = Con.
14S-72 14S-9 2 2 None A = Con.; B = Cu.
14S-73 14S-2 4 4 None A, B = Cu.; C = Al.; D = Ch.
Thermocouple
contact arrangements
AC Series - Thermocouple
contact arrangements
56
51
Thermocouple
contact arrangements
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact
Size
Pin
Insert
Rotation
C W
Contact Material
12 16
14S-74 14S-2 4 4 None A, B = Ch.; C, D = Al.
14S-75 14S-2 4 4 None A, B = Cu.; C, D = Con.
14S-76 14S-2 4 4 None A, C = Al.; B, D = Ch.
14S-77 14S-2 4 4 None A, D = Al.; B, C = Ch.
14S-78 14S-9 2 2 None A = Ch.; B = Al.
16S-52 16S-4 2 2 None A = Ch.; B = Al.
16S-54 16S-1 7 7 None A = Al.; B = Ch.; Balance = Cu.
16S-55 16S-1 7 7 None A = Con.; Balance = Cu.
16-52 16-11 2 2 90° A = Al.; B = Ch.
16-53 16-9 4 2 2 70° A = Al.; C = Ch.; B, D = Cu.
16-55 16-10 3 3 45° A = Al.; B = Ch.; C = Cu.
16-56 16-13 2 2 90° A = Con.; B = Cu.
16-57 16-10 3 3 None A = Al.; B = Cu.; C = Ch.
16-58 16-10 3 3 None A = Con.; B, C = Cu.
16-60 16-13 2 2 None A = Al.; B = Ch.
16-62 16-11 2 2 None A = Con.; B = Cu.
18-51 18-12 6 6 None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
18-52 18-11 5 5 None A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
18-53 18-12 6 6 None A, D = Ir.; B, E = Con.; C, F = Dummy
18-54 18-15 4 4 None A, C = Al.; B, D = Ch.
18-56 18-1 10 10 45° A, C, E, G, I = Ir.; B, D, F, H, J = Con.
18-57 18-12 6 6 45° A, C, E = Al.; B, D, F = Ch.
18-59 18-12 6 6 45° A, C = Ir.; B, E, F = Con.; D = Cu.
18-60 18-11 5 5 45° A, D = Al.; B, C, = Ch.; E = Cu.
18-61 18-12 6 6 None A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
18-62 18-12 6 6 None A, B, C = Ir.; D, E, F = Con.
18-63 18-15 4 4 None A, C = Con.; B, D = Cu.
18-65 18-12 6 6 None A = Ir.; B = Con.; Balance = Cu.
18-66 18-1 10 10 None A, C, E, G, I = Cu.; B, D, F, H, J = Con.
18-67 18-12 6 6 None A, C, E = Cu.; B, D, F = Con.
18-68 18-11 5 5 None A, D = Al.; B, C = Ch.; E = Cu.
18-69 18-1 10 10 None A = Al.; B = Ch.; Balance = Cu.
18-70 18-11 5 5 None A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
18-71 18-15 4 4 None A = Con.; Balance = Cu.
18-72 18-15 4 4 None D = Con.; Balance = Cu.
18-73 18-9 7 2 5 None A = Al.; D = Ch.; Balance = Cu.
18-74 18-12 6 6 None A = Ch.; B = Al.; D = Ir.; E = Cu.; C, F = Con.
20-52 20-4 4 4 315° A = Ir.; B = Con.; C = Ch.; D = Al.
20-56 20-7 8 8 45° A, B, G, H = Ir.; C, D, E, F = Con.
20-60 20-7 8 8 45° D = Ch.; E = Al.; Balance = Cu.
20-61 20-29 17 17 45° A, B, M = Cu.; Balance = Con.
20-62 20-15 7 7 80° A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-64 20-27 14 14 None A = Al.; C = Ch.; Balance = Cu.
AC Series - Thermocouple
contact arrangements
57
52
Thermocouple
contact arrangements
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact
Size
Pin
Insert
Rotation
C W
Contact Material
12 16
20-65 20-27 14 14 None A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
20-67 20-16 9 2 7 None H = Al.; I = Ch.; Balance = Cu.
20-68 20-7 8 8 None A, B, G, H = Con.; C, D, E, F = Cu.
20-69 20-27 14 14 None A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
20-70 20-29 17 17 None A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
20-71 20-29 17 17 None S = Al.; R = Ch.; Balance = Cu.
20-74 20-29 17 17 None A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
20-75 20-15 7 7 None G = Al.; Balance = Ch.
20-77 20-16 9 2 7 None A = Con.; Balance = Std.
20-80 20-27 14 14 None A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
20-81 20-27 14 14 None A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
20-82 20-29 17 17 None A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
22-36 22-23 8 8 347° A, C, E, G = Ir.; B, D, F, H = Con.
22-57 22-14 19 19 45° A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
22-60 22-14 19 19 45° U = Al.; N = Ch.; Balance = Cu.
22-62 22-23 8 8 60° A, B, F, G = Al.; C, D, E, H = Ch.
22-68 22-19 14 14 45° A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
22-69 22-19 14 14 45° A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
22-71 22-14 19 19 None V = Al.; U = Ch.; Balance = Cu.
22-72 22-5 6 2 4 None B = Al.; E = Ch.; Balance = Cu.
22-73 22-5 6 2 4 None E = Al.; B = Ch.; Balance = Cu.
22-74 22-23 8 8 None A, C, E, G = Ir.; B, D, F, H = Con.
22-75 22-23 8 8 None A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
22-76 21 21 None W = Con.; Balance = Cu.
22-77 22-19 14 14 None B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
22-78 22-14 19 19 None A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu.
22-79 22-10 4 4 None A, C, = Con.; B, D = Cu.
24-56 24-20 11 2 9 45° E = Al.; F = Ch.; Balance = Cu.
24-57 24-28 24 24 45° A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al.
24-62 24-28 24 24 None A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu.
24-63 24-28 24 24 None A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z =
Con.
24-64 24-5 16 16 None A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
24-68 24-28 24 24 None D = Con.; Balance = Cu.
24-81 24-7 16 2 14 None A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
28-53 28-11 22 4 18 45° J, L = Al.; K, M = Ch.; Balance = Cu.
28-58 28-20 14 10 4 45° A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
28-61 28-21 37 37 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con.
28-63 28-20 14 10 4 45° A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu.
28-64 28-15 35 35 None A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Balance = Cu.
28-65 28-12 26 26 None A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con.;
Y, a = Ch.; b, d = Cu.
28-67 28-16 20 20 None U = Con.; Balance = Cu.
28-68 28-15 35 35 45° T = Al.; U = Ch.; Balance = Cu.
AC Series - Thermocouple
contact arrangements
58
53
Thermocouple
contact arrangements
* Amphenol arrangement
Shell Size
and Arrg.
Similar to
MS Arrg.
Total
Contacts
Contact
Size Pin Insert
Rotation
C W
Contact Material
12 16
28-69 28-11 22 4 18 None G = Al.; R = Ch.; Balance = Cu.
28-70 28-11 22 4 18 None A = Al.; B = Ch.; Balance = Cu.
28-77 28-11 22 4 18 None J = Con.; Balance = Cu.
28-81 28-21 37 37 None A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k =
Ch.; Balance = Cu.
32-51 32-8 30 6 24 90° M = Ch.; N = Al.; Balance = Cu.
32-55 32-8 30 6 24 125° M, N = Ch.; O, P = Al.; Balance = Cu.
36-53 36-7 47 7 40 45° u, v, w = Al.; x, y, z = Ch.; Balance = Cu.
36-56 36-10 48 48 None A, C, E, G, L, J, H, P, R, T, V, X Z, b, d, f, h, k, q, n, m, u, w, y = Con.;
Balance = Cu.
36-57 36-8 47 1 46 None W = Al.; f = Ch. Balance = Cu.
36-58 36-15 35 35 None H = Al.; G = Ch.; Balance = Cu.
36-61 36-15 35 35 None A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu.
36-62 36-10 48 48 None A, C, E, = Al.; B, D, F = Ch.; Balance = Cu.
36-82 36-52* 52 52 None v, g = Ir.; p, y, c = Con. x = Ch.; Balance = Cu.
40-58 40-56* 85 85 None
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL,
AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance
= Con.
40-59 40-56* 85 85 None B = Ch.; C = Con.; Balance = Cu.
40-77 40-53* 60 60 None 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu.
40-78 40-53* 60 60 None 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu.
44-57 44-52 104 104 None A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
AC Series - Thermocouple
contact arrangements
59
AC Series
how to order
To more easily illustrate ordering procedure, part number
ACCL06AF18-1SX(025) is shown as follows:
1. AC designates Amphenol Industrial Series Threaded Connectors
2. C designates Crimp Contacts
S designates Solder Contacts
3. L designates low smoke zero halogen inserts and grommets
Omit for standard resilient inserts and grommets.
4. Shell Style
00 - Wall Mounting Receptacle
01 - Line Receptacle
02 - Box Mounting Receptacle
05 - Straight Plug
06 - Straight Plug with hardware
08 - 90 degree Plug
5. Class
A or AF - General duty connector
E or F - Environmental connector for a wire bundle
PGA or
PGR - Environmental connector for jacketed cable
6. Shell size and insert arrangement
See insert availability on pages 25-27
7. Contact type
P - Pin contacts
S - Socket contacts
R - RADSOK® crimp socket contacts (see page 31)
Ask for Brochure SL-391 for Amphe-Power Connectors with RADSOK Technology.
8. Alternate insert rotation
“W”, “X”, “Y”, “Z” designates that the insert is rotated in its shell from a normal
position. No letter required for normal (no rotation) position.
See page 28 for availability.
9. Variations RoHS Compliant
(072) - Gray zinc nickel nish
(023) - Electroless nickel nish
(025) - Black zinc alloy nish
(G96) - Black hard-coat anodize
(B30) - Gold plated contacts
(116) - Non-pre-tinned solder contacts
(472) - Black zinc alloy nish and solder contacts
less pre-lled cup ✓
(548) - Electroless nickel nish and solder contacts
less pre-lled cup ✓
(724) - Gray zinc nickel nish and solder contacts
less pre-lled cup ✓
AC C L 06 AF 18–1 S X (025)
1 2 3 4 5 6 7 8 9
For further RoHS Compliant
support, contact Amphenol Industrial
Operations or call 1-866-315-8559.
60
SAE AS50151 (Solder Contacts)
MS 3102 A 18 – 3 P W
1 2 3 4 5 6 7
1. Connector Type
MS designates Military Standard
2. Connector Style
3100 wall mounting receptacle
3101 cable connecting receptacle
3102 box mounting receptacle
3106 straight plug
3108 90° plug
3. Service Class
A solid shell for general, non-environmental applications
C solid shell for pressurized applications (MS3102 only)
E environmental resisting
F environmental resisting with strain relief
R lightweight environmental resisting
4., 5. Shell size and insert arrangement - see tables, pages 25-27.
6. Contact Types
P designates pin contact
S designates socket contact
7. Insert Rotation
“W”, “X”, “Y”, or “Z” designate that insert is rotated in its shell from
normal position. No letter required for normal (no rotation) position.
MS/Standard
how to order
61
AC Series/MS – accessories
10-40450, 10-36675 sealing gaskets,
10-405996 sealing plugs, sealing ranges
SEALING GASKETS
SEALING PLUG 10-405996-XX1
Sealing plugs are used to ll unused holes in multi-holed
grommet congurations.
All dimensions for reference only.
The Amphenol plain at gasket of synthetic rubber mate-
rial is provided to take complete advantage of waterproof
and pressure sealing features. It is for use with the ange
mounted receptacle.
This at gasket is provided to give the maximum in con-
nector performance. Its special feature is in providing
the maximum radio shielding under difcult conditions
of high receiver sensitivity and low signal strength
while retaining the sealing characteristics of the plain
gasket. This gasket is for use with the ange mounting
This gasket is provided for applications where the
major requirement is resistance to the injurious effects
of extremely low temperature. Even at temperatures
as low as –67°F this gasket retains its resiliency and
will seal a pressure differential of 30 psi.
Installation Dimensions Order Data
MS Inches Millimeters
Shell A B C D A B C D Plain Shielding Low
Size ± .010 + .016 + .016 ± .010 ± .25 +.41 +.41 ± .25 Temperature
- .000 - .000 – .00 – .00 Style
8S .594 .500 .875 .172 15.09 12.70 22.22 4.37 10-40450-8 10-40450-8S 10-36675-8
10S .719 .625 1.000 .172 18.26 15.88 25.40 4.37 10-40450-10 10-40450-10S 10-36675-10
10SL .719 .625 1.000 .172 18.26 15.88 25.40 4.37 10-40450-10 10-40450-10S 10-36675-10
12S .813 .750 1.094 .172 20.65 19.05 27.79 4.37 10-40450-12 10-40450-12S 10-36675-12
12 .813 .750 1.094 .172 20.65 19.05 27.79 4.37 10-40450-12 10-40450-12S 10-36675-12
14S .906 .875 1.188 .172 23.01 22.22 30.18 4.37 10-40450-14 10-40450-14S 10-36675-14
14 .906 .875 1.188 .172 23.01 22.22 30.18 4.37 10-40450-14 10-40450-14S 10-36675-14
16S .969 1.000 1.281 .172 24.61 25.40 32.54 4.37 10-40450-16 10-40450-16S 10-36675-16
16 .969 1.000 1.281 .172 24.61 25.40 32.54 4.37 10-40450-16 10-40450-16S 10-36675-16
18 1.063 1.125 1.375 .203 27.00 28.57 34.92 5.16 10-40450-18 10-40450-18S 10-36675-18
20 1.156 1.250 1.500 .203 29.36 31.75 38.10 5.16 10-40450-20 10-40450-20S 10-36675-20
22 1.250 1.375 1.625 .203 31.75 34.92 41.27 5.16 10-40450-22 10-40450-22S 10-36675-22
24 1.375 1.500 1.750 .203 34.92 38.10 44.45 5.16 10-40450-24 10-40450-24S 10-36675-24
28 1.563 1.750 2.000 .203 39.70 44.45 50.80 5.16 10-40450-28 10-40450-28S 10-36675-28
32 1.750 2.000 2.250 .219 44.45 50.80 57.15 5.56 10-40450-32 10-40450-32S 10-36675-32
36 1.938 2.188 2.500 .219 49.23 55.58 63.50 5.56 10-40450-36 10-40450-36S 10-36675-36
40 2.188 2.438 2.750 .219 55.58 61.93 69.85 5.56 10-40450-40 10-40450-40S 10-36675-40
Inches Millimeters
Contact Wire Color A Dia B C A Dia. B C
Order No. Size Size Code ± .010 ± .005 ± .010 ± 0.2 ± 0.1 ± 0.2
10-405996-161 16 20-16 Blue .083 .133 .564** 2.1 3.4 14.3***
10-405996-121 12 14-12 Yellow .121 .171 .564** 3.1 4.3 14.3***
10-405996-081 8 10-8 White .185 .315 .470 4.7 8.0 11.9
10-405996-041 4 4-6 Blue .310 .415 .470 7.9 10.5 11.9
10-405996-001 0 0-2 Yellow .440 .605 1.000 11.2 15.4 25.4
Hole Sealing Range
Size Millimeters Inches
16 2.3 – 3.0 .090 – .118
12 3.2 – 4.5 .126 – .177
8 3.8 – 6.5 .150 – .256
4 7.1 – 9.3 .279 – .366
0
GROMMET HOLE SEALING RANGE
** ± .020
*** ± 0.5 mm
C
A
B
CA
.031 ± .010
PLAIN
.020 ± .004
SHIELDING
.031 ± .010 LOW
TEMPERATURE
D
4 HOLES
B
DIA
45˚
A
DIA
C
.135 +.030
–.025
10.0 – 13.7 .394 – .539
62
55
C
B
V Thread
A
The MS3057-A style cable clamp was designed for use with jacketed cable or
wires protected by tubing. Both clamping halves float for maximum strain relief.
For unjacketed cable or wires, use corresponding MS3420 sleeve. To order
clamp with sleeve, add -1 to the 97 - number. Two telescoping sleeves are fur-
nished with shells sizes 24 and larger.
MS/Standard Accessories
MS3057-A style cable clamp,
MS3420 sleeve
Shell
Size
Amphenol
Number
A
±.031
B
Max.
C
Dia.
Min.
V
Thread
10SL, 12S 97-3057-1004 .795 .842 .3125 .6250-24
14,14S 97-3057-1007 .850 .995 .4375 .7500-20
16,16S 97-3057-1008 .920 1.120 .5625 .8750-20
18 97-3057-1010 .920 1.216 .6250 1.0000-20
20, 22 97-3057-1012 .927 1.403 .7500 1.1875-18
24, 28 97-3057-1016 1.015 1.683 .9375 1.4375-18
32 97-3057-1020 1.095 2.050 1.2500 1.7500-18
36 97-3057-1024 1.156 2.245 1.3750 2.0000-18
Sleeve
MS
Part No.
Amphenol
Number
A
±.005
B
±.005
C
±.010
D
±.031
3420-3 9779-513-3 .130 .210 .374 2.875
3420-4 9779-513-4 .220 .302 .500 2.750
3420-6 9779-513-6 .312 .427 .614 2.625
3420-8 9779-513-8 .437 .552 .739 2.500
3420-10 9779-513-10 .562 .615 .889 2.375
3420-12 9779-513-12 .625 .740 1.084 2.250
3420-16 9779-513-16 .750 .927 1.309 2.125
3420-20 9779-513-20 .937 1.240 1.592 2.000
3420-24 9779-513-24 1.250 1.365 1.842 1.875
A
C
D
B
AC Series/MS Accessories
MS3057-A style cable clamp,
MS3420 sleeve
63
63
PLUG PROTECTION CAP 10-329391-XX*
PLUG PROTECTION CAP 10-229125-XX*
PLUG PROTECTION CAP MS25042-XXDA*
Assembly
Number
A
Thread
Class 2A
B Dia.
+.010
–.000
C
Approx.
L
Max.
10-329391-10 .625-24UNEF .516 3.5 1.312
10-329391-11 .625-24UNEF .641 3.5 1.312
10-329391-12 .750-20UNEF .641 3.5 1.500
10-329391-14 .875-20UNEF .766 3.5 1.500
10-329391-16 1.000-20UNEF .891 3.5 1.500
10-329391-18 1.125-18UNEF 1.016 3.5 1.500
10-329391-20 1.250-18UNEF 1.141 4.0 1.500
10-329391-22 1.375-18UNEF 1.266 4.0 1.500
10-329391-24 1.500-18UNEF 1.391 4.5 1.500
10-329391-28 1.750-18UNS 1.641 4.5 1.500
10-329391-32 2.000-18UNS 1.891 5.0 1.500
10-329391-36 2.250-16UN 2.078 5.0 1.500
10-329391-40 2.500-16UN 2.328 5.0 1.500
10-329391-44 2.750-16UN 2.641 6.0 1.500
Assembly
Number
A
Thread
Class 2A
C
Approx.
D
Ref.
L
Max.
10-229125-10 .625-24NEF 3.0 .140 1.233
10-229125-12 .750-20UNEF 3.5 .140 1.421
10-229125-14 .875-20UNEF 3.5 .140 1.421
10-229125-16 1.000-20UNEF 3.5 .140 1.421
10-229125-18 1.125-18NEF 3.5 .140 1.421
10-229125-20 1.250-18NEF 3.5 .193 1.421
10-229125-22 1.375-18NEF 3.5 .193 1.421
10-229125-24 1.500-18NEF 4.5 .193 1.421
10-229125-28 1.750-18NS 4.5 .193 1.421
10-229125-32 2.000-18NS 5.0 .193 1.421
10-229125-36 2.250-16UN 5.0 .193 1.421
10-229125-40 2.500-16UN 5.0 .193 1.421
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
MS
Number
A
Thread
Class 2A
B Dia.
+.010
–.005
C
Approx.
L
Max.
MS25042-8DA .500-28UNEF .156 4.00 .969
MS25042-10DA .625-24UNEF .156 4.00 .969
MS25042-12DA .750-20UNEF .156 4.50 1.156
MS25042-14DA .875-20UNEF .156 4.50 1.156
MS25042-16DA 1.000-20UNEF .156 4.50 1.156
MS25042-18DA 1.125-18UNEF .156 4.50 1.156
MS25042-20DA 1.250-18UNEF .187 5.00 1.156
MS25042-22DA 1.375-18UNEF .187 5.00 1.156
MS25042-24DA 1.500-18UNEF .187 5.50 1.156
MS25042-28DA 1.750-18UNS .187 7.75 1.156
MS25042-32DA 2.000-18UNS .218 7.75 1.156
MS25042-36DA 2.250-16UN .218 7.75 1.156
MS25042-40DA 2.500-16UN .218 7.75 1.156
MS/Standard Accessories
protection caps – plug
B
A THD
L
C
A THD
L
D
C
D
A THD
L
C
AC Series/MS Accessories
protection caps – plug
64
64
RECEPTACLE PROTECTION CAP 10-329392-XX*
RECEPTACLE PROTECTION CAP 10-422905-XXX*
RECEPTACLE PROTECTION CAP MS25043-XXDA*
Assembly
Number
A
Thread
Class 2B
B
Dia.
Min.
C
Approx.
D
Dia.
Max.
L
Max.
10-329392-10 .625-24UNEF .516 3.5 .875 .793
10-329392-12 .750-20UNEF .641 3.5 1.000 .793
10-329392-14 .875-20UNEF .766 3.5 1.125 .793
10-329392-16 1.000-20UNEF .891 3.5 1.250 .793
10-329392-18 1.125-18UNEF 1.016 3.5 1.375 1.024
10-329392-20 1.250-18UNEF 1.141 4.0 1.500 1.024
10-329392-22 1.375-18UNEF 1.266 4.0 1.625 1.024
10-329392-24 1.500-18UNEF 1.391 4.5 1.750 1.024
10-329392-28 1.750-18UNS 1.641 4.5 2.000 1.024
10-329392-32 2.000-18UNS 1.891 5.0 2.250 1.024
10-329392-36 2.250-16UN 2.078 5.0 2.500 1.024
10-329392-40 2.500-16UN 2.328 5.0 2.656 1.024
10-329392-44 2.750-16UN 2.641 6.0 2.938 1.024
Assembly
Number
A
Thread
Class 2B
B
Ref.
C
Approx.
D
Dia.
Max.
L
Max.
10-422905-103 .625-24UNEF .140 3.0 .875 .812
10-422905-123 .750-20UNEF .140 3.5 1.000 .812
10-422905-143 .875-20UNEF .140 3.5 1.125 .812
10-422905-163 1.000-20UNEF .140 3.5 1.250 .812
10-422905-183 1.125-18UNEF .193 3.5 1.375 1.031
10-422905-203 1.250-18UNEF .193 4.0 1.500 1.031
10-422905-223 1.375-18UNEF .193 4.0 1.625 1.031
10-422905-243 1.500-18UNEF .193 4.5 1.750 1.031
10-422905-283 1.750-18UNS .193 4.5 2.000 1.031
10-422905-323 2.000-18UNS .193 5.0 2.250 1.031
10-422905-363 2.250-16UN .193 5.0 2.500 1.031
10-422905-403 2.500-16UN .193 5.0 2.656 1.031
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
MS
Number
A
Thread
Class 2B
B
+.010
–.005
C
Approx.
D
Dia.
Max.
L
Max.
MS25043-8DA .500-28UNEF .140 4.00 .688 .750
MS25043-10DA .625-24UNEF .140 4.00 .815 .750
MS25043-12DA .750-20UNEF .140 4.50 1.000 .750
MS25043-14DA .875-20UNEF .140 4.50 1.125 .750
MS25043-16DA 1.000-20UNEF .140 4.50 1.188 .750
MS25043-18DA 1.125-18UNEF .140 4.50 1.344 .750
MS25043-20DA 1.250-18UNEF .140 5.00 1.469 .750
MS25043-22DA 1.375-18UNEF .140 5.00 1.594 .750
MS25043-24DA 1.500-18UNEF .171 5.50 1.719 .750
MS25043-28DA 1.750-18UNS .171 7.75 1.969 .812
MS25043-32DA 2.000-18UNS .187 7.75 2.219 .812
MS25043-36DA 2.250-16UN .187 7.75 2.469 .812
MS25043-40DA 2.500-16UN .187 7.75 2.719 .812
MS/Standard Accessories
protection caps – receptacle
B
D
A THD
L
C
A THD
L
D
C
B
A THD
B
C
D
L
AC Series/MS Accessories
protection caps – receptacle
Cap without chain - 10-130969
65
65
10-70500 RECEPTACLE DUST CAP
for external threads
10-70506 PLUG DUST CAP
for internal threads
MS
Shell Size
Order
Number
A Dia.
Nominal
Thread
C
Dia.
±.031
L1
±.062
8S 10-70500-8 .500 .750 .500
10S 10-70500-10 .625 .875 .500
10SL 10-70500-10 .625 .875 .500
12S 10-70500-12 .750 1.000 .500
12 10-70500-12 .750 1.000 .500
14S 10-70500-14 .875 1.125 .500
14 10-70500-14 .875 1.125 .500
16S 10-70500-16 1.000 1.250 .500
16 10-70500-16 1.000 1.250 .500
18 10-70500-18 1.125 1.375 .562
20 10-70500-20 1.250 1.500 .562
22 10-70500-22 1.375 1.625 .562
24 10-70500-24 1.500 1.750 .562
28 10-70500-28 1.750 1.938 .562
32 10-70500-32 2.000 2.250 .562
36 10-70500-36 2.250 2.500 .625
40 10-70500-40 2.500 2.750 .625
MS
Shell Size
Order
Number
B
Dia.
Min.
L2
±.125
8S 10-70506-8S .469 .625
10S 10-70506-10S .587 .625
10SL 10-70506-10S .587 .625
12S 10-70506-12 .704 .625
12 10-70506-12 .704 .625
14S 10-70506-14 .828 .625
14 10-70506-14 .828 .625
16S 10-70506-16 .953 .625
16 10-70506-16 .953 .625
18 10-70506-18 1.072 .625
20 10-70506-20 1.197 .625
22 10-70506-22 1.322 .625
24 10-70506-24 1.447 .625
28 10-70506-28 1.697 .625
32 10-70506-32 1.947 .625
36 10-70506-36 2.190 .625
40 10-70506-40 2.440 .625
MS/Standard Accessories
dust caps
L
A
C
1
L
B
2
AC Series/MS
dust caps
66
AC Series/MS
application tools, torque values
When proprietary crimp contacts are employed rather than the standard MS approved solder
contacts, the following application tools are recommended for use. There is a possibility of
additional crimping tools other than those included being available at present or in the future
for this specic application.
Complete instructions for providing reliable crimped wire to contact terminations and inserting
proprietary crimp contacts in AC Series connectors are available in publication L-757.
Crimping Positioner/ Contact Contact Insertion Removal
Tool Turret Size Style Tool Tool
M22520/1-01 * 16 Pin & Socket 11-7345 11-8250 Kit
M22520/1-01 * 12 Pin & Socket 11-7082 11-8250 Kit
** ** 8 Pin & Socket 11-8220 11-8250 Kit
** ** 4 Pin & Socket 11-7365-4 † Pin 11-7370-4 †
Socket 11-7674-2 †
** ** 0 Pin & Socket 11-7365-5 † Pin 11-7370-5 †
Socket 11-7674-3 †
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
Size In./Lb. Max. Size In./Lb. Max.
10SL 26 22 85
14S 44 24 90
16 50 28 114
16S 50 32 120
18 55 36 153
20 65 40 170
TOOLING CHART
RECOMMENDED TORQUE FORCES
CONNECTOR BACKSHELLS
67
Additional Products
reverse bayonet coupling
5015 type connectors
Amphenol has replaced the previously available
AC-B series with the ACA-B.
The ACA-B is a modication of the SAE AS50151 family
designed for commercial and industrial environments requiring
a rugged bayonet style connector, including heavy duty
power and signal applications. A comprehensive selection of
insert arrangements and accessory hardware are available to
accommodate heavy-duty, commercial wire and cable. The
rugged shell is made from aluminum alloy and plated with a
variety of nishes to meet any application.
Features of the ACA-B Reverse Bayonet series:
• Quick positive coupling with audible and tactile indication
of full coupling.
• Intermateable with existing VG95234 connectors
• Rated 500 couplings minimum.
• No lockwiring required
• Inserts available in Neoprene material with alternate
materials available upon request.
• Contacts available in gold and silver plating
• Available in both crimp and solder terminations
• Numerous nishes available, including cadmium free zinc alloy.
• Rugged construction; aluminum or stainless steel components.
Ask for Amphenol catalog IC-4 for further information on
ACA-B Reverse Bayonet Connectors.
Amphenol ACA-B Reverse Bayonet Connectors
GT Reverse Bayonet Connectors
Amphenol GT Series of Connectors are heavy duty, rugged and
environmentally resistant, and are the preferred interconnect for the mass
transit industry. They are also used in power generation, petrochemical
industries and heavy equipment/geophysical marketplaces. GT connector
utilize SAE AS50151 and commercial inserts and are intermateable with
existing VG95234 connectors. Other features include:
• reverse bayonet coupling - quick mating, audible, visual and tactile
full mating indicators.
• UL recognized
• rated to 2000 couplings min.
• operating temperature range:
• with Neoprene inserts: –55°C to +125°C
• with Viton** inserts: –50°C to +200°C
• with low smoke/ame retardant inserts: –55°C to +125°C
• available in both crimp and solder termination
• rugged construction - aluminum or stainless steel components
• numerous military and commercial nishes available including gray zinc
nickel (cadmium free)
• resilient inserts provide high dielectric strength and moisture barrier.
IP67 performance in environmental versions
• over 40 varieties of shell styles and backend accessory combinations
Ask for Amphenol catalog IC-4 for further information on
GT Series Connectors.
Amphenol® GT Reverse Bayonet Connectors
Amphe-Power GT Connectors are also available
that incorporate RADSOK socket contacts. See
page 31 for advantages and features of RADSOK
contacts for high amperage capability.
68
72
Amphe-PowerTM 5015 Connectors
Amphenol offers the AC threaded series derived from the MIL-5015
family that can be enhanced with high amperage RADSOK® contacts.
Design characteristics of the Amphe-Power 5015 connectors are:
• The RADSOK contact handles up to 150% higher amperages than
standard contacts
• The RADSOK contact has a twisted hyperbolic, stamped grid config-
uration within the socket. This design ensures a large, coaxial, face-
to-face surface area engagement. As male pin is inserted, axial
members in the female half deflect, imparting high current flow
across the connection with minimal voltage loss.
• Contact arrangements have RADSOK sockets in sizes 0, 4 and 8
with standard contacts in sizes 16 and 12.
The contacts available in RADSOK and the amperages are as fol-
lows:
• Size 8 AWG can handle currents up to 69 amps.
• Size 4 AWG can handle currents up to 120 amps.
• Size 0 AWG can handle currents up to 250 amps.
(For availability of size 12 RADSOK that handles currents
up to 35 amps, consult Amphenol.)
• AC threaded 5015 styles include: solid shell for general,
non-environmental applications; pressurized style for use
on pressurized bulkheads or pressure barriers; environ-
mental resisting style with strain relief; lighter weight and
shorter environmental resisting style
For more information ask for Amphenol brochure SL-391,
Amphe-Power Connectors with RADSOK technology.
MIL-5015 Connectors with PCB Contacts
Box mount receptacle MIL-5015 type connectors can be
supplied with PCB tails for mounting to a printed circuit
board.
See catalog 12-170, Amphenol Cylindrical Connectors for
Printed Circuit Board Applications. This catalog gives the
most commonly available and widely used insert patterns for
cylindrical connectors with PCB tails, along with pin-out loca-
tion diagrams.
Additional MS/Standard Connectors
offered by Amphenol, cont.
Amphe-Power® 5015 Connectors
(AC Threaded 5015 type connectors with RADSOK® high
amperage contacts)
The RADSOK design - socket
cylinder within female contact
has twisted hyperbolic grid.
Provides higher amperage capa-
bilities with low insertion force
and low temperature rise.
AC Series/MS Alternate Designs
Amphe-PowerTM 5015 Connectors
Amphenol offers the AC threaded series derived from the 5015 family
that can be enhanced with high amperage RADSOK® contacts.
Design characteristics of the Amphe-Power 5015 connectors are:
• The RADSOK contact handles 50% to 150% higher amperages than
standard contacts
• The RADSOK contact has a twisted hyperbolic, stamped grid cong-
uration within the socket. This design ensures a large, coaxial, face-
to-face surface area engagement. As male pin is inserted, axial mem-
bers in the female half deect, imparting high current ow across the
connection with minimal voltage loss.
• Contact arrangements have RADSOK sockets in sizes 0, 4, 8 and 12
with standard contacts in size 16.
The contacts available in RADSOK and the amperages are
as fol lows:
• Size 12 AWG can handle currents up to 35 amps.
• Size 8 AWG can handle currents up to 70 amps.
• Size 4 AWG can handle currents up to 120 amps.
• Size 0 AWG can handle currents up to 250 amps.
• AC threaded 5015 styles include: solid shell for general,
non-environmental applications; pressurized style for use
on pressurized bulkheads or pressure barriers;
environmental resisting style with strain relief; lighter
weight and shorter environmental resisting style
For more information ask for Amphenol brochure SL-391,
Amphe-Power Connectors with RADSOK technology.
5015 Connectors with PCB Contacts
Box mount receptacle 5015 type connectors can be supplied
with PCB tails for mounting to a printed circuit board.
Consult Amphenol Industrial for part numbering.
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Notice: Specications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofce for the latest specications. All statements, information and data given herein are believed
to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other
measures may not be required. Specications are typical and may not apply to all connectors.
IC-5
HKA 1-2016
www.amphenol-industrial.com
