Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Overview The KEMET T493 Series is designed for the COTS (Commercial Off-the-Shelf) requirements of military and aerospace applications. This series is a surface mount product offering various lead-frame plating options, Weibull grading options, and surge current testing options. Standard, low, and ulta-low ESR options are available. All lots of this series are conditioned with MIL-PRF-55365 Group A testing. This series is also approved for DSCC Drawing 07016 (please see part number list specific to this drawing). Benefits Applications * * * * * * * * * * * * Typical applications include decoupling and filtering in military and aerospace applications. Established reliability options Taped and reeled per EIA 481-1 Symmetrical, compliant terminations Laser-marked case 100% surge current test available on all case sizes Termination options B, C, H, K, T Weibull failure options B and C Voltage rating of 4 - 63 VDC Operating temperature range of -55C to +125C Capacitance values of 0.1 F to 337 F All parts tested per Group A of MIL-PRF-55365 Approved for DSCC Drawing 07016 applications Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 1 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Ordering Information T 493 D 227 K 006 C H 61 20 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Surge ESR T= Tantalum Military COTS A, B, C, D, E, X First two digits represent significant figures. Third digit specifies number of zeros. J = 5% K = 10% M = 20% 61 = None 62 = 10 Cycles 25C 63 = 10 cycles, -55C and 85C 10 = ESR Standard 20 = ESR Low 30 = ESR Ultra low 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V 020 = 20 V 025 = 25 V 035 = 35 V 050 = 50 V 063 = 63 V A = N/A B = 0.1%/1,000 hours C = 0.01%/1,000 hours C = Hot Solder Dipped H = Standard Solder Coated (SnPb 5% Pb minimum) B = Gold Plated K = Solder Fused T = 100% Tin N = Non-Magnetic 100% Tin (Sn) M = Non-Magnetic (SnPb) Ordering Information DSCC 07016 07016- 001 K B H A Drawing Number Dash Number Capacitance Tolerance Reliability Grade Lead Material Surge See Part Number Reference J = 5% K = 10% M = 20% B = 0.1%/1,000 hours C = 0.01%/1,000 hours C = Hot Solder Dipped H = Standard Solder Coated (SnPb 5% Pb minimum) B = Gold Plated A = + 25C after Weibull B = -55C and +85C after Weibull C = -55C and + 85C before Weibull Z or no option= No test required Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.1 - 330 F @ 120 Hz/25C J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) 4 - 63 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 2 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ rated voltage, 2,000 hours 125C @ 2/3 rated voltage, 2,000 hours 125C @ 0 volts, 2,000 hours MIL-STD-202, Method 107, Condition B, mounted, -55C to 125C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C C/C DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage) MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification MIL-PRF-55365/8 DSCC Drawing 07016 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 3 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Electrical Characteristics ESR vs. Frequency 1000 T493B106/020_IMP T493E476/035_IMP T493X226/035_IMP T493B106/020_ESR T493E476/035_ESR T493X226/035_ESR Impedance, ESR (Ohms) 100 10 1 0.1 0.01 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Capacitance vs. Frequency Capacitance (F) 100 10 T493B106/020 T493E476/035 T493X226/035 1 0.1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 10,000,000 T2007_T493 * 7/22/2013 4 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size KEMET Component EIA L* W* F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 H* X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3.2 0.2 1.6 0.2 1.6 0.2 3216-18 (0.126 0.008) (0.063 0.008) (0.063 0.008) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 0.10 (.004 .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) B 3.5 0.2 2.8 0.2 1.9 0.2 3528-21 (0.138 0.008) (0.110 0.008) (0.075 0.008) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087) C 6.0 0.3 3.2 0.3 2.5 0.3 6032-28 (0.236 0.03) (0.126 0.012) (0.098 0.012) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) D 7.3 0.3 4.3 0.3 2.8 0.3 7343-31 (0.287 0.012) (0.169 0.012) (0.110 0.012) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) X 7.3 0.3 4.3 0.3 4.0 0.3 7343-43 (0.287 0.012) (0.169 0.012) (0.157 0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) E 7.3 0.3 6.00.3 3.6 0.2 7360-38 (0.287 0.012) (0.236 0.012) (0.142 0.008) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 2.4 (.094) 4.1 (.161) 0.8 (.31) 1.1 (.043) 1.3 (.051) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-PRF-55365/8 specified dimensions Dimensions - Millimeters (Inches) DSCC 07016 L 1/2 H2 MINIMUM H H2 P P SOLDERABLE SURFACES (SEE NOTE 5) W2 W Case Size Component KEMET H* H2 Minimum L P +/- 0.3 (0.012) W W2 +/- 0.1 (0.004) A 1.6 0.2 (0.063 0.008) 0.7 (0.028) 3.2 0.2 (0.126 0.008) 0.8 (0.031) 1.6 0.2 (0.063 0.008) 1.2 (0.047) B 1.9 0.2 (0.075 0.008) 0.7 (0.028) 3.5 0.2 (0.138 0.008) 0.8 (0.031) 2.8 0.2 (0.110 0.008) 2.2 (0.087) C 2.5 0.3 (0.098 0.012) 1.0 (0.039) 6.0 0.3 (0.236 0.03) 1.3 (0.051) 3.2 0.3 (0.126 0.012) 2.2 (0.087)15 D 2.8 0.3 (0.110 0.012) 1.0 (0.039) 7.3 0.3 (0.287 0.012) 1.3 (0.051) 4.3 0.3 (0.169 0.012) 2.4 (0.094) X 2.74 0.3 (0.108 0.015) 1.22 (0.048) 6.93 (0.273) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 5 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1A - Ratings & Part Number Reference Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Amps +20C Maximum/ 5 Minutes 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.88 0.88 0.88 1.32 1.32 1.32 1.88 1.88 2.72 2.72 2.72 4 4 4 4 6 6 8.8 13.2 13.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.63 0.63 0.945 0.945 0.945 1.386 1.386 1.386 2.079 2.079 2.961 2.961 2.961 Amps +20C Maximum/ 5 Minutes % @ +20C 120 Hz Maximum 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 30.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Maximum @ 20C 100 kHz Maximum 8.0 8.0 8.0 6.0 5.5 6.0 3.5 4.0 3.5 4.0 3.5 1.8 4.0 3.5 1.8 3.0 1.8 3.5 1.6 0.8 1.4 1.0 1.2 0.8 1.2 0.8 0.9 0.7 0.5 8.0 8.0 8.0 6.0 5.5 6.0 3.5 4.0 3.5 4.0 3.5 1.8 4.0 3.5 1.8 3.0 1.8 3.5 1.6 0.8 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 6.0 4.0 3.5 3.0 2.0 2.0 1.2 1.5 1.2 1.5 0.6 0.5 3.0 0.5 0.5 0.5 0.5 2.0 0.25 0.2 N/A 0.7 0.2 0.2 0.3 0.15 0.7 0.15 0.2 6.0 6.0 6.0 3.5 3.5 2.0 1.2 2.0 1.0 1.5 0.7 0.6 3.0 0.6 0.5 0.6 0.3 2.0 0.25 0.22 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.50 N/A N/A 0.25 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A @ 20C 100 kHz Maximum Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C DC Leakage DF Standard ESR Low ESR Ultra-low ESR Moisture Sensitivity VDC F KEMET/EIA (See below for part options) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 2.2 3.3 4.7 6.8 6.8 10 10 15 15 22 22 22 33 33 33 47 47 68 68 68 100 100 100 100 150 150 220 330 330 1.5 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 15 15 22 22 22 33 33 47 47 47 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 A/3216-18 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 T493A225(1)004(2)(3)(4)(5) T493A335(1)004(2)(3)(4)(5) T493A475(1)004(2)(3)(4)(5) T493A685(1)004(2)(3)(4)(5) T493B685(1)004(2)(3)(4)(5) T493A106(1)004(2)(3)(4)(5) T493B106(1)004(2)(3)(4)(5) T493A156(1)004(2)(3)(4)(5) T493B156(1)004(2)(3)(4)(5) T493A226(1)004(2)(3)(4)(5) T493B226(1)004(2)(3)(4)(5) T493C226(1)004(2)(3)(4)(5) T493A336(1)004(2)(3)(4)(5) T493B336(1)004(2)(3)(4)(5) T493C336(1)004(2)(3)(4)(5) T493B476(1)004(2)(3)(4)(5) T493C476(1)004(2)(3)(4)(5) T493B686(1)004(2)(3)(4)(5) T493C686(1)004(2)(3)(4)(5) T493D686(1)004(2)(3)(4)(5) T493A107(1)004(2)(3)(4)(5) T493B107(1)004(2)(3)(4)(5) T493C107(1)004(2)(3)(4)(5) T493D107(1)004(2)(3)(4)(5) T493C157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) T493D227(1)004(2)(3)(4)(5) T493D337(1)004(2)(3)(4)(5) T493X337(1)004(2)(3)(4)(5) T493A155(1)006(2)(3)(4(5) T493A225(1)006(2)(3)(4)(5) T493A335(1)006(2)(3)(4)(5) T493A475(1)006(2)(3)(4)(5) T493B475(1)006(2)(3)(4)(5) T493A685(1)006(2)(3)(4)(5) T493B685(1)006(2)(3)(4)(5) T493A106(1)006(2)(3)(4)(5) T493B106(1)006(2)(3)(4)(5) T493A156(1)006(2)(3)(4)(5) T493B156(1)006(2)(3)(4)(5) T493C156(1)006(2)(3)(4)(5) T493A226(1)006(2)(3)(4)(5) T493B226(1)006(2)(3)(4)(5) T493C226(1)006(2)(3)(4)(5) T493B336(1)006(2)(3)(4)(5) T493C336(1)006(2)(3)(4)(5) T493B476(1)006(2)(3)(4)(5) T493C476(1)006(2)(3)(4)(5) T493D476(1)006(2)(3)(4)(5) VDC F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Ultra-low Moisture ESR Sensitivity (1) To complete KEMET part number, insert M for 20%, K for 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25C, 63 = 10 cycles -55C +85C after Weibull or 64 = 10 cycles -55C +85C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2007_T493 * 7/22/2013 6 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1A - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Amps +20C Maximum/ 5 Minutes 4.284 4.284 4.284 6.3 6.3 6.3 9.45 9.45 13.86 13.86 13.86 20.79 20.79 29.61 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.68 0.68 1 1 1 1.5 1.5 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 15 15 22 22 33 47 0.5 0.5 Amps +20C Maximum/ 5 Minutes % @ +20C 120 Hz Maximum 8.0 6.0 6.0 15.0 8.0 8.0 8.0 8.0 10.0 8.0 8.0 8.0 8.0 10.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 6.0 4.0 % @ +20C 120 Hz Maximum @ 20C 100 kHz Maximum 1.0 1.2 0.8 10.0 1.2 0.8 1.2 0.7 1.2 0.7 0.7 0.5 0.5 0.2 10.0 8.0 8.0 6.0 5.5 6.0 3.5 6.0 3.5 4.0 3.5 1.8 6.0 3.5 1.8 3.0 1.8 3.5 1.6 0.8 1.2 0.8 1.2 0.8 0.5 1.2 0.7 0.7 0.7 0.5 0.5 0.5 0.2 12.0 10.0 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 0.65 0.2 0.2 8.0 0.3 0.15 0.3 0.15 0.3 0.1 0.15 0.15 0.1 0.1 6.0 6.0 6.0 4.0 3.5 3.0 1.5 3.0 1.2 1.8 0.8 0.6 4.0 0.7 0.5 0.7 0.4 2.0 0.3 0.3 0.3 0.2 0.3 0.2 0.15 0.3 0.1 0.1 0.2 0.2 0.1 0.1 0.05 8.0 6.0 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum N/A N/A 0.18 0.70 0.15 N/A 0.20 N/A 0.23 0.10 0.07 0.10 0.07 0.05 N/A N/A N/A N/A N/A N/A 1.3 N/A 0.90 N/A 0.75 N/A 3.2 N/A 0.48 N/A 0.29 N/A N/A N/A N/A 0.08 0.23 0.09 N/A N/A 0.08 0.08 0.09 0.08 0.05 0.05 N/A N/A N/A @ 20C 100 kHz Maximum Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C DC Leakage DF Standard ESR Low ESR Ultra-low ESR Moisture Sensitivity VDC F KEMET/EIA (See below for part options) 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 68 68 68 100 100 100 150 150 220 220 220 330 330 470 1 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 33 33 33 47 47 68 68 68 100 100 150 150 220 220 330 470 0.68 1 B/3528-21 C/6032-28 D/7343-31 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 T493B686(1)006(2)(3)(4)(5) T493C686(1)006(2)(3)(4)(5) T493D686(1)006(2)(3)(4)(5) T493B107(1)006(2)(3)(4)(5) T493C107(1)006(2)(3)(4)(5) T493D107(1)006(2)(3)(4)(5) T493C157(1)006(2)(3)(4)(5) T493D157(1)006(2)(3)(4)(5) T493C227(1)006(2)(3)(4)(5) T493D227(1)006(2)(3)(4)(5) T493X227(1)006(2)(3)(4)(5) T493D337(1)006(2)(3)(4)(5) T493X337(1)006(2)(3)(4)(5) T493X477(1)006(2)(3)(4)(5) T493A105(1)010(2)(3)(4)(5) T493A155(1)010(2)(3)(4)(5) T493A225(1)010(2)(3)(4)(5) T493A335(1)010(2)(3)(4)(5) T493B335(1)010(2)(3)(4)(5) T493A475(1)010(2)(3)(4)(5) T493B475(1)010(2)(3)(4)(5) T493A685(1)010(2)(3)(4)(5) T493B685(1)010(2)(3)(4)(5) T493A106(1)010(2)(3)(4)(5) T493B106(1)010(2)(3)(4)(5) T493C106(1)010(2)(3)(4)(5) T493A156(1)010(2)(3)(4)(5) T493B156(1)010(2)(3)(4)(5) T493C156(1)010(2)(3)(4)(5) T493B226(1)010(2)(3)(4)(5) T493C226(1)010(2)(3)(4)(5) T493B336(1)010(2)(3)(4)(5) T493C336(1)010(2)(3)(4)(5) T493D336(1)010(2)(3)(4)(5) T493C476(1)010(2)(3)(4)(5) T493D476(1)010(2)(3)(4)(5) T493C686(1)010(2)(3)(4)(5) T493D686(1)010(2)(3)(4)(5) T493X686(1)010(2)(3)(4)(5) T493C107(1)010(2)(3)(4)(5) T493D107(1)010(2)(3)(4)(5) T493D157(1)010(2)(3)(4)(5) T493X157(1)010(2)(3)(4)(5) T493D227(1)010(2)(3)(4)(5) T493X227(1)010(2)(3)(4)(5) T493X337(1)010(2)(3)(4)(5) T493X477(1)010(2)(3)(4)(5) T493A684(1)016(2)(3)(4)(5) T493A105(1)016(2)(3)(4)(5) VDC F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Ultra-low Moisture ESR Sensitivity (1) To complete KEMET part number, insert M for 20%, K for 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25C, 63 = 10 cycles -55C +85C after Weibull or 64 = 10 cycles -55C +85C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2007_T493 * 7/22/2013 7 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1A - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Amps +20C Maximum/ 5 Minutes 0.5 0.5 0.528 0.528 0.752 0.752 1.088 1.088 1.088 1.6 1.6 1.6 2.4 2.4 3.52 3.52 3.52 5.28 5.28 7.52 7.52 10.88 16 16 24 24 35.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.66 0.66 0.94 0.94 0.94 1.36 1.36 2 2 3 3 4.4 4.4 6.6 9.4 Amps +20C Maximum/ 5 Minutes % @ +20C 120 Hz Maximum 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 12.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Maximum @ 20C 100 kHz Maximum 8.0 6.0 6.0 3.5 6.0 3.5 7.0 3.5 1.9 3.0 3.5 1.8 3.0 1.8 2.2 1.6 0.8 1.2 0.8 1.2 0.8 0.7 0.7 0.7 0.7 0.5 0.5 14.0 12.0 10.0 8.0 6.0 7.0 3.5 7.0 3.5 6.0 3.5 2.4 3.5 1.9 3.0 1.8 1.7 1.0 1.2 0.8 0.8 0.7 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 6.0 4.0 3.5 2.0 3.0 1.5 3.0 1.2 0.8 N/A 0.8 0.6 0.8 0.4 0.8 0.4 0.3 0.3 0.25 0.5 0.2 0.2 0.125 0.1 0.4 0.2 0.2 9.0 8.0 5.5 4.5 4.0 4.0 1.5 4.0 1.3 1.8 1.0 0.6 1.0 0.6 1.0 0.5 0.4 0.35 0.4 0.3 0.2 0.2 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum N/A N/A N/A N/A N/A N/A N/A N/A 0.75 N/A N/A N/A N/A N/A N/A N/A N/A 0.23 0.15 0.35 0.10 0.15 0.10 0.08 0.15 0.10 0.10 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.48 0.38 0.28 N/A 0.18 0.15 0.10 @ 20C 100 kHz Maximum Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C DC Leakage DF Standard ESR Low ESR Ultra-low ESR Moisture Sensitivity VDC F KEMET/EIA (See below for part options) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 22 22 22 33 33 47 47 68 100 100 150 150 220 0.47 0.68 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 15 15 22 22 33 47 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 T493A155(1)016(2)(3)(4)(5) T493A225(1)016(2)(3)(4)(5) T493A335(1)016(2)(3)(4)(5) T493B335(1)016(2)(3)(4)(5) T493A475(1)016(2)(3)(4)(5) T493B475(1)016(2)(3)(4)(5) T493A685(1)016(2)(3)(4)(5) T493B685(1)016(2)(3)(4)(5) T493C685(1)016(2)(3)(4)(5) T493A106(1)016(2)(3)(4)(5) T493B106(1)016(2)(3)(4)(5) T493C106(1)016(2)(3)(4)(5) T493B156(1)016(2)(3)(4)(5) T493C156(1)016(2)(3)(4)(5) T493B226(1)016(2)(3)(4)(5) T493C226(1)016(2)(3)(4)(5) T493D226(1)016(2)(3)(4)(5) T493C336(1)016(2)(3)(4)(5) T493D336(1)016(2)(3)(4)(5) T493C476(1)016(2)(3)(4)(5) T493D476(1)016(2)(3)(4)(5) T493D686(1)016(2)(3)(4)(5) T493D107(1)016(2)(3)(4)(5) T493X107(1)016(2)(3)(4)(5) T493D157(1)016(2)(3)(4)(5) T493X157(1)016(2)(3)(4)(5) T493X227(1)016(2)(3)(4)(5) T493A474(1)020(2)(3)(4)(5) T493A684(1)020(2)(3)(4)(5) T493A105(1)020(2)(3)(4)(5) T493A155(1)020(2)(3)(4)(5) T493B155(1)020(2)(3)(4)(5) T493A225(1)020(2)(3)(4)(5) T493B225(1)020(2)(3)(4)(5) T493A335(1)020(2)(3)(4)(5) T493B335(1)020(2)(3)(4)(5) T493A475(1)020(2)(3)(4)(5) T493B475(1)020(2)(3)(4)(5) T493C475(1)020(2)(3)(4)(5) T493B685(1)020(2)(3)(4)(5) T493C685(1)020(2)(3)(4)(5) T493B106(1)020(2)(3)(4)(5) T493C106(1)020(2)(3)(4)(5) T493C156(1)020(2)(3)(4)(5) T493D156(1)020(2)(3)(4)(5) T493C226(1)020(2)(3)(4)(5) T493D226(1)020(2)(3)(4)(5) T493D336(1)020(2)(3)(4)(5) T493D476(1)020(2)(3)(4)(5) VDC F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Ultra-low Moisture ESR Sensitivity (1) To complete KEMET part number, insert M for 20%, K for 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25C, 63 = 10 cycles -55C +85C after Weibull or 64 = 10 cycles -55C +85C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2007_T493 * 7/22/2013 8 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1A - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Amps +20C Maximum/ 5 Minutes 9.4 13.6 13.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.55 0.55 0.55 0.825 0.825 1.175 1.175 1.7 1.7 2.5 2.5 3.75 3.75 3.75 5.5 5.5 8.25 8.25 11.75 11.75 17 17 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.525 0.525 0.77 0.77 1.155 Amps +20C Maximum/ 5 Minutes % @ +20C 120 Hz Maximum 4.0 8.0 6.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 10.0 6.0 8.0 8.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Maximum @ 20C 100 kHz Maximum 0.7 0.7 0.7 15.0 14.0 10.0 7.5 8.0 5.0 10.0 5.0 7.0 4.5 3.5 3.5 2.5 1.5 2.4 1.9 1.4 1.5 1.0 1.5 1.0 0.7 0.8 0.7 0.7 0.7 0.7 0.7 0.3 0.1 20.0 19.0 18.0 15.0 14.0 8.0 10.0 6.5 10.0 5.0 5.0 4.5 4.0 3.5 3.5 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 0.15 0.2 0.15 10.0 9.0 6.0 5.5 4.0 2.0 3.0 1.5 N/A 1.2 2.2 2.0 1.2 1.0 0.6 0.6 1.0 0.5 0.4 0.9 0.35 0.2 0.2 0.23 0.4 0.3 0.2 0.3 N/A N/A 10.0 6.0 6.0 6.0 4.0 2.5 6.0 2.5 6.0 2.0 3.0 2.5 2.5 1.5 1.3 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 0.10 0.15 0.12 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.30 N/A 0.75 N/A 0.58 0.49 N/A 0.45 N/A N/A 0.28 N/A N/A N/A 0.09 0.18 0.12 0.15 N/A N/A N/A N/A N/A N/A N/A 1.5 N/A N/A N/A 1.5 N/A N/A 1.5 0.75 N/A @ 20C 100 kHz Maximum Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C DC Leakage DF Standard ESR Low ESR Ultra-low ESR Moisture Sensitivity VDC F KEMET/EIA (See below for part options) 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 47 68 68 0.33 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 15 15 15 22 22 33 33 47 47 68 68 0.1 0.15 0.22 0.33 0.47 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 3.3 X/7343-43 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 T493X476(1)020(2)(3)(4)(5) T493D686(1)020(2)(3)(4)(5) T493X686(1)020(2)(3)(4)(5) T493A334(1)025(2)(3)(4)(5) T493A474(1)025(2)(3)(4)(5) T493A684(1)025(2)(3)(4)(5) T493B684(1)025(2)(3)(4)(5) T493A105(1)025(2)(3)(4)(5) T493B105(1)025(2)(3)(4)(5) T493A155(1)025(2)(3)(4)(5) T493B155(1)025(2)(3)(4)(5) T493A225(1)025(2)(3)(4)(5) T493B225(1)025(2)(3)(4)(5) T493C225(1)025(2)(3)(4)(5) T493B335(1)025(2)(3)(4)(5) T493C335(1)025(2)(3)(4)(5) T493B475(1)025(2)(3)(4)(5) T493C475(1)025(2)(3)(4)(5) T493C685(1)025(2)(3)(4)(5) T493D685(1)025(2)(3)(4)(5) T493C106(1)025(2)(3)(4)(5) T493D106(1)025(2)(3)(4)(5) T493C156(1)025(2)(3)(4)(5) T493D156(1)025(2)(3)(4)(5) T493X156(1)025(2)(3)(4)(5) T493D226(1)025(2)(3)(4)(5) T493X226(1)025(2)(3)(4)(5) T493D336(1)025(2)(3)(4)(5) T493X336(1)025(2)(3)(4)(5) T493D476(1)025(2)(3)(4)(5) T493X476(1)025(2)(3)(4)(5) T493X686(1)025(2)(3)(4)(5) T493E686(1)025(2)(3)(4)(5) T493A104(1)035(2)(3)(4)(5) T493A154(1)035(2)(3)(4)(5) T493A224(1)035(2)(3)(4)(5) T493A334(1)035(2)(3)(4)(5) T493A474(1)035(2)(3)(4)(5) T493B474(1)035(2)(3)(4)(5) T493A684(1)035(2)(3)(4)(5) T493B684(1)035(2)(3)(4)(5) T493A105(1)035(2)(3)(4)(5) T493B105(1)035(2)(3)(4)(5) T493B155(1)035(2)(3)(4)(5) T493C155(1)035(2)(3)(4)(5) T493B225(1)035(2)(3)(4)(5) T493C225(1)035(2)(3)(4)(5) T493B335(1)035(2)(3)(4)(5) VDC F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Ultra-low Moisture ESR Sensitivity (1) To complete KEMET part number, insert M for 20%, K for 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25C, 63 = 10 cycles -55C +85C after Weibull or 64 = 10 cycles -55C +85C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2007_T493 * 7/22/2013 9 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1A - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Amps +20C Maximum/ 5 Minutes 1.155 1.6 1.645 1.645 2.38 2.38 3.5 3.5 3.5 5.3 5.25 5.25 7.7 7.7 11.6 11.55 16.45 16.45 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.75 0.75 1.1 1.1 1.65 2.35 2.35 3.4 3.4 5 4.3 6.3 Amps +20C Maximum/ 5 Minutes % @ +20C 120 Hz Maximum 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Maximum @ 20C 100 kHz Maximum 2.5 1.5 2.5 1.5 2.0 1.3 2.0 1.0 0.9 0.45 0.8 0.9 0.7 0.7 0.3 0.6 0.3 0.5 20.0 19.0 16.0 14.0 10.0 9.0 8.0 7.0 5.5 4.5 3.5 3.5 2.5 2.0 1.5 0.9 0.6 1.0 0.7 1.0 0.6 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 0.8 N/A 0.6 0.7 0.9 0.5 1.2 0.3 0.25 N/A 0.3 0.3 0.4 0.3 N/A 0.3 N/A 0.3 10.0 10.0 10.0 10.0 2.5 2.0 1.8 1.6 1.6 1.5 1.0 1.5 0.8 0.8 0.6 0.3 0.3 0.5 0.4 0.6 0.4 @ 20C 100 kHz Maximum @ 20C 100 kHz Maximum 0.60 N/A 0.45 N/A N/A 0.40 N/A 0.25 0.18 N/A 0.23 0.20 0.20 0.20 N/A 0.18 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.3 N/A N/A N/A 0.60 0.70 0.28 N/A N/A N/A N/A 0.3 0.2 @ 20C 100 kHz Maximum Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C DC Leakage DF Standard ESR Low ESR Ultra-low ESR Moisture Sensitivity VDC F KEMET/EIA (See below for part options) 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 33 33 47 47 0.1 0.15 0.15 0.22 0.33 0.47 0.47 0.68 1 1.5 1.5 2.2 2.2 3.3 4.7 4.7 6.8 6.8 10 6.8 10 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T493C335(1)035(2)(3)(4)(5) T493B475(1)035(2)(3)(4)(5) T493C475(1)035(2)(3)(4)(5) T493D475(1)035(2)(3)(4)(5) T493C685(1)035(2)(3)(4)(5) T493D685(1)035(2)(3)(4)(5) T493C106(1)035(2)(3)(4)(5) T493D106(1)035(2)(3)(4)(5) T493X106(1)035(2)(3)(4)(5) T493C156(1)035(2)(3)(4)(5) T493D156(1)035(2)(3)(4)(5) T493X156(1)035(2)(3)(4)(5) T493D226(1)035(2)(3)(4)(5) T493X226(1)035(2)(3)(4)(5) T493D336M035(2)(3)(4)(5) T493X336(1)035(2)(3)(4)(5) T493X476(1)035(2)(3)(4)(5) T493E476(1)035(2)(3)(4)(5) T493A104(1)050(2)(3)(4)(5) T493A154(1)050(2)(3)(4)(5) T493B154(1)050(2)(3)(4)(5) T493B224(1)050(2)(3)(4)(5) T493B334(1)050(2)(3)(4)(5) T493B474(1)050(2)(3)(4)(5) T493C474(1)050(2)(3)(4)(5) T493C684(1)050(2)(3)(4)(5) T493C105(1)050(2)(3)(4)(5) T493C155(1)050(2)(3)(4)(5) T493D155(1)050(2)(3)(4)(5) T493C225(1)050(2)(3)(4)(5) T493D225(1)050(2)(3)(4)(5) T493D335(1)050(2)(3)(4)(5) T493D475(1)050(2)(3)(4)(5) T493X475(1)050(2)(3)(4)(5) T493D685(1)050(2)(3)(4)(5) T493X685(1)050(2)(3)(4)(5) T493X106(1)050(2)(3)(4)(5) T493X685(1)063(2)(3)(4)(5) T493X106(1)063(2)(3)(4)(5) VDC F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Ultra-low Moisture ESR Sensitivity (1) To complete KEMET part number, insert M for 20%, K for 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25C, 63 = 10 cycles -55C +85C after Weibull or 64 = 10 cycles -55C +85C before Weibull. Designates Surge current option. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2007_T493 * 7/22/2013 10 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1B - DSCC 07016, Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DSCC Drawing 07016 Part Number DC Leakage DF Standard ESR Moisture Sensitivity VDC F KEMET/EIA A/3216-18 B/3528-20 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 C/6032-28 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 E/7260-38 A/3216-18 A/3216-18 A/3216-18 B/3528-20 See page 2 for Ordering Information T493A336(1)004(2)(3)(4)20 T493B107(1)004(2)(3)(4)20 T493A335(1)006(2)(3)(4)10 T493A475(1)006(2)(3)(4)10 T493A685(1)006(2)(3)(4)20 T493A106(1)006(2)(3)(4)10 T493A156(1)006(2)(3)(4)20 T493A226(1)006(2)(3)(4)20 T493B226(1)006(2)(3)(4)20 T493B336(1)006(2)(3)(4)20 T493C476(1)006(2)(3)(4)20 T493C686(1)006(2)(3)(4)20 T493C107(1)006(2)(3)(4)30 T493D227(1)006(2)(3)(4)20 T493X337(1)006(2)(3)(4)20 T493A475(1)010(2)(3)(4)20 T493A685(1)010(2)(3)(4)20 T493A106(1)010(2)(3)(4)10 T493A106(1)010(2)(3)(4)20 T493A156(1)010(2)(3)(4)30 T493B156(1)010(2)(3)(4)20 T493B226(1)010(2)(3)(4)20 T493C226(1)010(2)(3)(4)30 T493B336(1)010(2)(3)(4)10 T493C336(1)010(2)(3)(4)20 T493C476(1)010(2)(3)(4)20 T493C686(1)010(2)(3)(4)20 T493D686(1)010(2)(3)(4)30 T493D227(1)010(2)(3)(4)30 T493X227(1)010(2)(3)(4)30 T493X337(1)010(2)(3)(4)20 T493X337(1)010(2)(3)(4)30 T493A225(1)016(2)(3)(4)30 T493A335(1)016(2)(3)(4)10 T493A335(1)016(2)(3)(4)20 T493B685(1)016(2)(3)(4)20 T493B106(1)016(2)(3)(4)20 T493B156(1)016(2)(3)(4)20 T493C226(1)016(2)(3)(4)20 T493C336(1)016(2)(3)(4)20 T493C476(1)016(2)(3)(4)30 T493D686(1)016(2)(3)(4)30 T493D107(1)016(2)(3)(4)20 T493D157(1)016(2)(3)(4)30 T493E157(1)016(2)(3)(4)10 T493A155(1)020(2)(3)(4)20 T493A475(1)020(2)(3)(4)10 T493A475(1)020(2)(3)(4)20 T493B475(1)020(2)(3)(4)20 See page 2 for Ordering Information 07016-001(1)(2)(3)(4) 07016-004(1)(2)(3)(4) 07016-006(1)(2)(3)(4) 07016-007(1)(2)(3)(4) 07016-008(1)(2)(3)(4) 07016-009(1)(2)(3)(4) 07016-010(1)(2)(3)(4) 07016-011(1)(2)(3)(4) 07016-012(1)(2)(3)(4) 07016-013(1)(2)(3)(4) 07016-014(1)(2)(3)(4) 07016-016(1)(2)(3)(4) 07016-017(1)(2)(3)(4) 07016-020(1)(2)(3)(4) 07016-021(1)(2)(3)(4) 07016-026(1)(2)(3)(4) 07016-027(1)(2)(3)(4) 07016-028(1)(2)(3)(4) 07016-029(1)(2)(3)(4) 07016-030(1)(2)(3)(4) 07016-032(1)(2)(3)(4) 07016-033(1)(2)(3)(4) 07016-035(1)(2)(3)(4) 07016-037(1)(2)(3)(4) 07016-039(1)(2)(3)(4) 07016-040(1)(2)(3)(4) 07016-042(1)(2)(3)(4) 07016-044(1)(2)(3)(4) 07016-049(1)(2)(3)(4) 07016-051(1)(2)(3)(4) 07016-054(1)(2)(3)(4) 07016-055(1)(2)(3)(4) 07016-060(1)(2)(3)(4) 07016-061(1)(2)(3)(4) 07016-062(1)(2)(3)(4) 07016-065(1)(2)(3)(4) 07016-067(1)(2)(3)(4) 07016-068(1)(2)(3)(4) 07016-071(1)(2)(3)(4) 07016-074(1)(2)(3)(4) 07016-076(1)(2)(3)(4) 07016-079(1)(2)(3)(4) 07016-080(1)(2)(3)(4) 07016-082M(1)(2)(3)(4) 07016-084(1)(2)(3)(4) 07016-086(1)(2)(3)(4) 07016-088(1)(2)(3)(4) 07016-089(1)(2)(3)(4) 07016-090(1)(2)(3)(4) KEMET/EIA See page 2 for Ordering Information See page 2 for Ordering Information % @ +20C 120 Hz Max 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max @+20C 100 kHz Max 3.0 0.9 8.0 6.0 5.0 4.0 3.5 3.0 0.6 0.6 0.3 0.2 0.15 0.1 0.1 5.0 4.0 3.0 1.8 3.2 0.6 0.7 0.3 0.6 0.5 0.3 0.3 0.15 0.15 0.05 0.1 0.05 5.5 5.0 3.5 1.2 0.9 0.8 0.375 0.3 0.35 0.15 0.125 0.15 0.05 6.5 4.0 1.8 1.0 @+20C 100 kHz Max Temperature 260C 1 1 1 1 1 F A @ +20C Max/5 Min 1.3 4.0 0.5 0.5 0.5 0.6 0.9 1.4 1.4 2.1 3.0 4.3 6.3 13.9 20.8 0.5 0.7 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 6.8 6.8 22.0 22.0 33.0 33.0 0.5 0.5 0.5 1.1 1.6 2.4 3.5 5.3 7.5 10.9 16.0 24.0 24.0 0.5 0.9 0.9 0.9 A @ +20C Max/5 Min 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 33 100 3.3 4.7 6.8 10 15 22 22 33 47 68 100 220 330 4.7 6.8 10 10 15 15 22 22 33 33 47 68 68 220 220 330 330 2.2 3.3 3.3 6.8 10 15 22 33 47 68 100 150 150 1.5 4.7 4.7 4.7 VDC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DSCC Drawing 07016 Part Number DC Leakage DF Standard ESR Moisture Sensitivity (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Temperature 260C T2007_T493 * 7/22/2013 11 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Table 1B - DSCC 07016, Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DSCC Drawing 07016 Part Number DC Leakage DF Standard ESR Moisture Sensitivity VDC F KEMET/EIA B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 E/7260-38 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 B/3528-20 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 See page 2 for Ordering Information T493B685(1)020(2)(3)(4)20 T493B106(1)020(2)(3)(4)20 T493C106(1)020(2)(3)(4)20 T493C156(1)020(2)(3)(4)20 T493C226(1)020(2)(3)(4)20 T493D336(1)020(2)(3)(4)20 T493D476(1)020(2)(3)(4)20 T493D686(1)020(2)(3)(4)20 T493X686(1)020(2)(3)(4)20 T493A684(1)025(2)(3)(4)10 T493A105(1)025(2)(3)(4)10 T493A155(1)025(2)(3)(4)10 T493A155(1)025(2)(3)(4)20 T493B225(1)025(2)(3)(4)20 T493B335(1)025(2)(3)(4)20 T493B475(1)025(2)(3)(4)10 T493B475(1)025(2)(3)(4)20 T493C685(1)025(2)(3)(4)20 T493C106(1)025(2)(3)(4)10 T493C106(1)025(2)(3)(4)20 T493D226(1)025(2)(3)(4)20 T493D336(1)025(2)(3)(4)20 T493D336(1)025(2)(3)(4)30 T493D476(1)025(2)(3)(4)20 T493D476(1)025(2)(3)(4)30 T493E686(1)025(2)(3)(4)10 T493A474(1)035(2)(3)(4)20 T493A684(1)035(2)(3)(4)20 T493A105(1)035(2)(3)(4)20 T493B155(1)035(2)(3)(4)10 T493B225(1)035(2)(3)(4)30 T493B475(1)035(2)(3)(4)10 T493D685(1)035(2)(3)(4)30 T493C106(1)035(2)(3)(4)20 T493C156(1)035(2)(3)(4)10 T493D156(1)035(2)(3)(4)20 T493D226(1)035(2)(3)(4)20 T493D336M035(2)(3)(4)10 T493X336(1)035(2)(3)(4)20 T493A154(1)050(2)(3)(4)20 T493B474(1)050(2)(3)(4)20 T493C155(1)050(2)(3)(4)20 T493D155(1)050(2)(3)(4)20 T493D225(1)050(2)(3)(4)20 T493D335(1)050(2)(3)(4)20 T493D475(1)050(2)(3)(4)30 T493X685(1)050(2)(3)(4)20 See page 2 for Ordering Information 07016-091(1)(2)(3)(4) 07016-092(1)(2)(3)(4) 07016-094(1)(2)(3)(4) 07016-096(1)(2)(3)(4) 07016-098(1)(2)(3)(4) 07016-100(1)(2)(3)(4) 07016-102(1)(2)(3)(4) 07016-104(1)(2)(3)(4) 07016-106(1)(2)(3)(4) 07016-108M(1)(2)(3)(4) 07016-109(1)(2)(3)(4) 07016-110(1)(2)(3)(4) 07016-111(1)(2)(3)(4) 07016-113(1)(2)(3)(4) 07016-114(1)(2)(3)(4) 07016-116(1)(2)(3)(4) 07016-117(1)(2)(3)(4) 07016-120(1)(2)(3)(4) 07016-121(1)(2)(3)(4) 07016-122(1)(2)(3)(4) 07016-125(1)(2)(3)(4) 07016-127(1)(2)(3)(4) 07016-128(1)(2)(3)(4) 07016-130M(1)(2)(3)(4) 07016-131M(1)(2)(3)(4) 07016-132(1)(2)(3)(4) 07016-133M(1)(2)(3)(4) 07016-134M(1)(2)(3)(4) 07016-135(1)(2)(3)(4) 07016-137(1)(2)(3)(4) 07016-138(1)(2)(3)(4) 07016-140(1)(2)(3)(4) 07016-143(1)(2)(3)(4) 07016-144(1)(2)(3)(4) 07016-146(1)(2)(3)(4) 07016-147(1)(2)(3)(4) 07016-149(1)(2)(3)(4) 07016-152M(2)(3)(4) 07016-154M(1)(2)(3)(4) 07016-157M(1)(2)(3)(4) 07016-160(1)(2)(3)(4) 07016-164(1)(2)(3)(4) 07016-165(1)(2)(3)(4) 07016-166(1)(2)(3)(4) 07016-167(1)(2)(3)(4) 07016-168(1)(2)(3)(4) 07016-171(1)(2)(3)(4) KEMET/EIA See page 2 for Ordering Information See page 2 for Ordering Information % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max @+20C 100 kHz Max 1.0 1.0 0.7 0.4 0.4 0.2 0.2 0.2 0.2 10.0 8.0 7.5 3.0 2.0 2.0 1.5 0.7 0.7 0.5 0.3 0.2 0.3 0.09 0.25 0.175 0.1 12.0 8.0 7.5 5.2 2.0 1.5 0.4 1.6 0.5 0.3 0.4 0.3 0.3 15.0 9.5 2.0 1.5 1.2 0.8 0.3 0.4 @+20C 100 kHz Max Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 F A @ +20C Max/5 Min 1.4 2.0 2.0 3.0 4.4 6.6 9.4 13.6 13.6 0.5 0.5 0.5 0.5 0.6 0.8 1.2 1.2 1.7 2.5 2.5 5.5 8.3 8.3 11.8 11.8 17.0 0.5 0.5 0.5 0.5 0.8 1.6 2.4 3.5 5.3 5.3 7.7 11.6 11.6 0.5 0.5 0.8 0.8 1.1 1.7 2.4 3.4 A @ +20C Max/5 Min 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 6.8 10 10 15 22 33 47 68 68 0.68 1 1.5 1.5 2.2 3.3 4.7 4.7 6.8 10 10 22 33 33 47 47 68 0.47 0.68 1 1.5 2.2 4.7 6.8 10 15 15 22 33 33 0.15 0.47 1.5 1.5 2.2 3.3 4.7 6.8 VDC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DSCC Drawing 07016 Part Number DC Leakage DF Standard ESR Moisture Sensitivity (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Temperature 260C T2007_T493 * 7/22/2013 12 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Recommended Voltage Derating Guidelines 85C to 125C 120% VR 67% of VR 100% 50% of VR 33% of VR % Working Voltage % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage -55C to 85C 80% 60% 40% 20% 0% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation 25C 1.00 85C 0.90 125C 0.40 KEMET Case Code EIA Case Code A B C D X E S T U V T510X T510E 3216-18 3528-21 6032-28 7343-31 7343-43 7360-38 3216-12 3528-12 6032-15 7343-20 7343-43 7360-38 Maximum Power Dissipation (P max) mWatts @ 25C w/+20C Rise 75 85 110 150 165 200 60 70 90 125 270 285 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = Z P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 13 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated voltage 5% of Rated voltage 1% of Rated voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case A B C D L M H E1 Q R2 S2 T U V W EIA 3216-18 3528-21 6032-25 7343-31 6032-19 3528-15 7360-20 7360-38 7343-12 2012-12 3216-12 3528-12 6032-15 7343-20 7343-15 W 1.35 2.35 2.35 2.55 2.35 2.35 4.25 4.25 2.55 1.05 1.35 2.35 2.35 2.55 2.55 L 2.20 2.21 2.77 2.77 2.77 2.20 2.77 2.77 2.77 1.83 2.20 2.20 2.77 2.77 2.77 S 0.62 0.92 2.37 3.67 2.37 0.92 3.67 3.67 3.67 0.15 0.62 0.92 2.37 3.67 3.67 V1 6.02 6.32 8.92 10.22 8.92 6.32 10.22 10.22 10.22 4.82 6.02 6.32 8.92 10.22 10.22 V2 2.80 4.00 4.50 5.60 4.50 4.00 7.30 7.30 5.60 2.50 2.80 4.00 4.50 5.60 5.60 W 1.23 2.23 2.23 2.43 2.23 2.23 4.13 4.13 2.43 0.93 1.23 2.23 2.23 2.43 2.43 L 1.80 1.80 2.37 2.37 2.37 1.80 2.37 2.37 2.37 1.50 1.80 1.80 2.37 2.37 2.37 S 0.82 1.12 2.57 3.87 2.57 1.12 3.87 3.87 3.87 0.22 0.82 1.12 2.57 3.87 3.87 V1 4.92 5.22 7.82 9.12 7.82 5.22 9.12 9.12 9.12 3.72 4.92 5.22 7.82 9.12 9.12 V2 2.30 3.50 4.00 5.10 4.00 3.50 6.80 6.80 5.10 2.00 2.30 3.50 4.00 5.10 5.10 W 1.13 2.13 2.13 2.33 2.13 2.13 4.03 4.03 2.33 0.83 1.13 2.13 2.13 2.33 2.33 L 1.42 1.42 1.99 1.99 1.99 1.42 1.99 1.99 1.99 1.12 1.42 1.42 1.99 1.99 1.99 S 0.98 1.28 2.73 4.03 2.73 1.28 4.03 4.03 4.03 0.38 0.98 1.28 2.73 4.03 4.03 V1 4.06 4.36 6.96 8.26 6.96 4.36 8.26 8.26 8.26 2.86 4.06 4.36 6.96 8.26 8.26 V2 2.04 3.24 3.74 4.84 3.74 3.24 6.54 6.54 4.84 1.74 2.04 3.24 3.74 4.84 4.84 X1 Y1 7343-43 7343-40 2.55 2.55 2.77 2.77 3.67 3.67 10.22 10.22 5.60 5.60 2.43 2.43 2.37 2.37 3.87 3.87 9.12 9.12 5.10 5.10 2.33 2.33 1.99 1.99 4.03 4.03 8.26 8.26 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 14 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds 3C/seconds maximum Ramp-up Rate (TL to TP) 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/seconds Maximum Ramp Down Rate = 6C/seconds tL Tsmax Tsmin 25 tS 25C to Peak Time Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 15 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Capacitor Marking KEMET Military COTS Rated Voltage + Polarity Indicator (+) 156 25 K 230 Picofarad Code KEMET ID Date Code* * 230 = 30th week of 2012 Date Code * 1 digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 16 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 - Packaging Quantity Case Code KEMET I S T M U L W Z V A B C D Y X E/T428P H EIA 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7360-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 1,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 17 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 0.600 (0.024) T Maximum T1 Maximum 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 18 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 - 200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 56 10 72 - 200 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2007_T493 * 7/22/2013 19 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 20 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 21 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 22 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 23 Tantalum Surface Mount Capacitors - High Reliability COTS (CWR11 Style) T493 Series Military/Aerospace COTS MnO2 Digitally signed by Jeannette Calvo DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com Date: 2013.07.26 13:18:07 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2007_T493 * 7/22/2013 24