Pluggable Terminal Block-Plug 5.08 mm Pitch Dimensions : Millimetres (Inches) Specifications: Rated voltage Rated current Wire size Housing material Cage clamp Contact Screw size Operating temperature Torque UL File Number E330595 : : : : : : : : : 300 V ac 16 A 24 to 12 AWG Polyamide 66 Brass, Ni plated Phosphor bronze, tin plated M3, steel, zinc plated -40C to +105C 7 Ib-inch www.element14.com www.farnell.com www.newark.com Page <1> 19/09/11 V1.1 Pluggable Terminal Block-Plug 5.08 mm Pitch Specification Table Description A (mm) A (Inch) Part Number Pluggable Terminal Block-Plug / 5.08 mm Pitch 25.4 1 MCTC-10D05 Pluggable Terminal Block-Plug / 5.08 mm Pitch 30.5 1.2 MCTC-10D06 Pluggable Terminal Block-Plug / 5.08 mm Pitch 35.6 1.4 MCTC-10D07 Pluggable Terminal Block-Plug / 5.08 mm Pitch 40.6 1.6 MCTC-10D08 Pluggable Terminal Block-Plug / 5.08 mm Pitch 45.7 1.8 MCTC-10D09 Pluggable Terminal Block-Plug / 5.08 mm Pitch 50.8 2 MCTC-10D10 Pluggable Terminal Block-Plug / 5.08 mm Pitch 55.9 2.2 MCTC-10D11 Pluggable Terminal Block-Plug / 5.08 mm Pitch 61 2.4 MCTC-10D12 Part Number Explanation: MCT C Multicomp Terminal Blocks Pluggable Type (Plug Side) Number of Positions - 10 D 05 Series Pitch Size Number of Positions : 05 = 5, 06 = 6, 07 = 7, 08 = 8, 09 = 9, 10 = 10 11 = 11 and 12 = 12 Positions Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2011. www.element14.com www.farnell.com www.newark.com Page <2> 19/09/11 V1.1