DG9408E, DG9409E www.vishay.com Vishay Siliconix 3.2 , Fast Switching Speed, +12 V / +5 V / +3 V / 5 V, 4- / 8-Channel Analog Multiplexers DESCRIPTION FEATURES The DG9408E, DG9409E uses BiCMOS wafer fabrication technology that allows the DG9408E, DG9409E to operate on single and dual supplies. Single supply voltage ranges from 3 V to 16 V while dual supply operation is recommended with 3 V to 8 V. * 3 V to 16 V single supply or 3 V to 8 V dual supply operation The DG9408E is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address (A0, A1, A2). The DG9409E is a dual 4-channel differential analog multiplexer designed to connect one of four differential inputs to a common dual output as determined by its 2-bit binary address (A0, A1). Break-before-make switching action to protect against momentary crosstalk between adjacent channels. As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device terminations. The DG9408E, DG9409E are offered in a QFN package that has a nickel-palladium-gold device terminations and is represented by the lead (Pb)-free "-E4" suffix. The nickel-palladium-gold device terminations meet all the JEDEC(R) standards for reflow and MSL ratings. * Low on-resistance - RON: 3.2 typ. * Fast switching: tON - 36 ns, tOFF - 24 ns * Break-before-make guaranteed * Low leakage * TTL, CMOS, LV logic (3 V) compatible * 2500 V ESD protection (HBM) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 BENEFITS * Fast switching speed * Low switch resistance * Wide operation voltage range * Simple logic interface APPLICATIONS * Automatic test equipment * Process control and automation * Data acquisition systems * Meters and instruments * Medical and healthcare systems * Communication systems * Audio and video signal routing * Relay replacement * Battery powered systems FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9408E QFN16 DG9409E QFN16 S1 A2 V- D S1b Db V- Da 16 15 14 13 16 15 14 13 S2 1 12 S5 S2b 1 12 S1a GND 2 11 S6 GND 2 11 S2a S3 3 10 EN S3b 3 10 EN S7 S4b 4 S4 4 9 Decoder / driver 95 Decoder / driver 5 6 7 8 5 6 7 8 A0 V+ A1 S8 A0 V+ A1 S4a Top view S3a Top view Note * QFN16 package central exposed pad has no electrical connection inside the chip. It can be connected GND, V+, V-, or left floating. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TRUTH TABLE AND ORDERING INFORMATION TRUTH TABLE DG9408E TRUTH TABLE DG9409E A2 A1 A0 EN ON SWITCH A1 A0 EN ON SWITCH X X X 1 None X X 1 None 0 0 0 0 1 0 0 0 1 0 0 1 0 2 0 1 0 2 0 1 0 0 3 1 0 0 3 0 1 1 0 4 1 1 0 4 1 0 0 0 5 1 0 1 0 6 1 1 0 0 7 1 1 1 0 8 X = do not care For low and high voltage levels for VAX and VEN consult "Digital Control" parameters for specific V+ operation. See specifications tables for: Single supply 12 V Dual supply V+ = 5 V, V- = -5 V Single supply 5 V Single supply 3 V ORDERING INFORMATION TEMP. RANGE -40 C to +85 C PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY 16-pin QFN (4 mm x 4 mm) (variation 1) DG9408EDN-T1-GE4 Tape and reel, 2500 units DG9409EDN-T1-GE4 Tape and reel, 2500 units ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER LIMIT Voltage referenced V+ to VGND to V- 18 Digital inputs a, VS, VD 30 Continuous current, S or D 100 Peak current, S or D (pulsed at 1 ms, 10 % duty cycle max.) Package solder reflow conditions (lead (Pb)-free assembly) d 260 +0 / -5 -65 to +150 Power dissipation (package) b, (TA = 70 C) 16-pin (4 x 4 mm) QFN c JEDEC(R) mA 200 16-pin (4 x 4 mm) QFN Storage temperature Latch up current, per JESD78 V (V-) - 0.3 to (V+) + 0.3 Current (any terminal except S or D) ESD human body model (HBM), per ANSI / ESDA / UNIT -0.3 to +18 JS-001 1880 C mW 2500 V 400 mA Notes a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads soldered or welded to PC board. c. Derate 23.5 mW/C above 70 C. d. Manual soldering with soldering iron is not recommended for leadless components. The QFN is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 12 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 12 V, 10 %, V- = 0 V VA, VEN = 0.8 V or 2.4 V f LIMITS -40 C to +85 C TEMP.b MIN. c UNIT TYP. d MAX. c Analog Switch Analog signal range e On-resistance RON match between channels g On-resistance flatness i VANALOG RON V+ = 10.8 V, VD = 2 V or 9 V, IS = 50 mA sequence each switch on RON RON flatness V+ = 10.8 V, VD = 2 V or 9 V, IS = 50 mA IS(off) VEN = 2.4 V, VD = 11 V or 1 V, VS = 1 V or 11 V Switch off leakage current ID(off) Channel on leakage current ID(on) VEN = 0 V, VS = VD = 1 V or 11 V Full 0 - 12 Room - 3.2 7 Full - Room - - 3.6 Room - - 8 V 7.5 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 nA Digital Control Logic high input voltage VINH Full 2.4 - - Logic low input voltage VINL Full - - 0.8 Input current IIN VAX = VEN = 2.4 V or 0.8 V Full -1 - 1 VS1 = 8 V, VS8 = 0 V, (DG9408E) VS1b = 8 V, VS4b = 0 V, (DG9409E) see fig. 2 Room - 40 71 tTRANS Full - - 75 tBBM VS(all) = VDA = 5 V see fig. 4 Room 2 20 - Full - - - Room - 36 70 V A Dynamic Characteristics Transition time Break-before-make time Enable turn-on time Enable turn-off time Charge injection e tON(EN) tOFF(EN) Q VAX = 0 V, VS1 = 5 V (DG9408E) VAX = 0 V, VS1b = 5 V (DG9409E) see fig. 3 Full - - 75 Room - 24 44 Full - - 46 CL = 1 nF, VGEN = 0 V, RGEN = 0 Room - 4.5 - Room - -83 - Room - -89 - DG9408E Room - 17 - DG9409E Room - 16 - DG9408E Room - 134 - DG9409E Room - 67 - DG9408E Room - 154 - DG9409E Room - 86 - Room - - 1 Off isolation e, h OIRR Crosstalk e XTALK Source off capacitance e CS(off) f = 1 MHz, VS = 0 V, VEN = 2.4 V Drain off capacitance e CD(off) f = 1 MHz, VD = 0 V, VEN = 2.4 V Drain on capacitance e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V f = 100 kHz, RL = 1 k ns pC dB pF Power Supplies Power supply current S16-1452-Rev. A, 25-Jul-16 I+ VEN = VA = 0 V or V+ A Document Number: 75375 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix SPECIFICATIONS (Dual Supply V+ = 5 V, V- = -5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, V- = -5 V, 10 % VA, VEN = 0.8 V or 2 V f TEMP. b LIMITS -40 C to +85 C MIN. c UNIT TYP. d MAX. c Analog Switch Analog signal range e On-Resistance VANALOG RON RON match between channels g On-resistance flatness i RON RON Flatness IS(off) Switch off leakage current a ID(off) Channel on leakage current a V+ = 4.5 V, V- = -4.5 V, VD = 3.5 V, IS = 50 mA sequence each switch on ID(on) V+ = 4.5 V, V- = -4.5 V, VD = 3.5 V, IS = 50 mA V+ = 5.5, V- = -5.5 V VEN = 2.4 V, VD = 4.5 V, VS = 4.5 V V+ = 5.5 V, V- = -5.5 V VEN = 0 V, VD = 4.5 V, VS = 4.5 V Full -5 - 5 Room - 4 8 Full - - 8.5 Room - - 3.6 Room - - 8.2 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 V nA Digital Control Logic high input voltage VINH Full 2 - - Logic low input voltage VINL Full - - 0.8 Input current a IIN VAX = VEN = 2 V or 0.8 V Full -1 - 1 VS1 = 3.5 V, VS8 = -3.5 V, (DG9408E) VS1b = 3.5 V, VS4b = -3.5 V, (DG9409E) see fig. 2 Room - 47 65 tTRANS Full - - 70 tBBM VS(all) = VDA = 3.5 V see fig. 4 Room 1 13 - Full - - - Room - 54 70 V A Dynamic Characteristics Transition time e Break-before-make time e Enable turn-on time e Enable turn-off time e Source off capacitance e tON(EN) tOFF(EN) CS(off) VAX = 0 V, VS1 = 3.5 V (DG9408E) VAX = 0 V, VS1b = 3.5 V (DG9409E) see fig. 3 f = 1 MHz, VS = 0 V, VEN = 2 V Drain off capacitance e CD(off) f = 1 MHz, VD = 0 V, VEN = 2 V Drain on capacitance e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V Full - - 76 Room - 28 40 Full - - 43 DG9408E Room - 15 - DG9409E Room - 14 - DG9408E Room - 126 - DG9409E Room - 63 - DG9408E Room - 153 - DG9409E Room - 89 - ns pF Power Supplies Power supply current S16-1452-Rev. A, 25-Jul-16 I+ I- VEN = VA = 0 V or V+ Room - - 1 Room -1 - - A Document Number: 75375 4 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, 10 %, V- = 0 V VA, VEN= 0.8 V or 2 V f LIMITS -40 C to +85 C TEMP. b MIN. c TYP. d UNIT MAX. c Analog Switch Analog signal range e On-resistance VANALOG RON RON match between channels g V+ = 4.5 V, VD or VS = 1 V or 3.5 V, IS = 50 mA RON On-resistance flatness i RON Flatness IS(off) Switch off leakage current a ID(off) Channel on leakage current a ID(on) Full 0 - 5 Room - 6.8 10.5 Full - - 11 Room - - 3.6 Room - - 9 V V+ = 4.5 V, VD = 1 V or 3.5 V, IS = 50 mA V+ = 5.5 V VS = 1 V or 4 V, VD = 4 V or 1 V V+ = 5.5 V VD = VS = 1 V or 4 V, sequence each switch on Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 Full 2 - - Full - - 0.8 nA Digital Control Logic high input voltage VINH Logic low input voltage VINL Input current a V+ = 5 V IIN VAX = VEN = 2 V or 0.8 V Full -1 - 1 - 79 97 tTRANS VS1 = 3.5 V, VS8 = 0 V, (DG9408E) VS1b = 3.5 V, VS4b = 0 V, (DG9409E) see fig. 2 Room Transition time e Full - - 112 Break-before-make time e tOPEN VS(all) = VDA = 3.5 V see fig. 4 Room 2 35 - Full - - - Room - 83 95 V A Dynamic Characteristics Enable turn-on time e Enable turn-off time e Charge injection e tON(EN) tOFF(EN) Q Off isolation e, h OIRR Crosstalk e XTALK Source off capacitance e CS(off) VAX = 0 V, VS1 = 3.5 V (DG9408E) VAX = 0 V, VS1b = 3.5 V (DG9409E) see fig. 3 Full - - 116 Room - 36 57 Full - - 61 CL = 1 nF, RGEN = 0, VGEN = 0 V Room - 3.7 - Room - -83 - Room - -90 - DG9408E Room - 19 - DG9409E Room - 18 - DG9408E Room - 149 - DG9409E Room - 74 - DG9408E Room - 170 - DG9409E Room - 94 - Room - - 1 RL = 1 k, f = 100 kHz f = 1 MHz, VS = 0 V, VEN = 0 V Drain off capacitance e CD(off) f = 1 MHz, VD = 0 V, VEN = 2 V Drain on capacitance e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V ns pC dB pF Power Supplies Power supply current S16-1452-Rev. A, 25-Jul-16 I+ VEN = VA = 0 V or V+ A Document Number: 75375 5 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 3 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 3 V, 10 %, V- = 0 V VEN = 0.4 V or 1.8 V f LIMITS -40 C to +85 C TEMP. b MIN. c TYP. d UNIT MAX.c Analog Switch Analog signal range e On-resistance RON match between channels g On-resistance flatness i VANALOG RON RON RON Flatness IS(off) Switch off leakage current a ID(off) Channel on leakage current a V+ = 2.7 V, VD = 0.5 V or 2.2 V, IS = 5 mA ID(on) V+ = 2.7 V, VD = 0.5 V or 2.2 V, IS = 5 mA V+ = 3.3 V VS = 2 V or 1 V, VD = 1 or 2 V V+ = 3.3 V VD = VS = 1 V or 2 V, sequence each switch on Full 0 - 3 Room - 13 25.5 Full - - 26.5 Room - - 3.6 Room - - 13 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 Room -2 - 2 Full -15 - 15 V nA Digital Control Logic high input voltage VINH Full 1.8 - - Logic low input voltage VINL Full - - 0.4 Input current a IIN VAX = VEN = 1.8 V or 0.4 V Full -1 - 1 VS1 = 1.5 V, VS8 = 0 V, (DG9408E) VS1b = 1.5 V, VS4b = 0 V, (DG9409E) see fig. 2 Room - 169 245 tTRANS Full - - 278 tBBM VS(all) = VDA = 1.5 V see fig. 4 Room 2 96 - Full - - - Room - 202 255 272 V A Dynamic Characteristics Transition time Break-before-make time Enable turn-on time Enable turn-off time Charge injection e tON(EN) tOFF(EN) Q VAX = 0 V, VS1 = 1.5 V (DG9408E) VAX = 0 V, VS1b =1.5 V (DG9409E) see fig. 3 Full - - Room - 72 97 Full - - 104 Room - 2.1 - Room - -83 - Room - -90 - DG9408E Room - 20 - DG9409E Room - 19 - CL = 1 nF, RGEN = 0, VGEN = 0 V Off isolation e, h OIRR Crosstalk e XTALK Source off capacitance e CS(off) f = 1 MHz, VS = 0 V, VEN = 1.8 V Drain off capacitance e CD(off) f = 1 MHz, VD = 0 V, VEN = 1.8 V Drain on capacitance e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V f = 100 kHz, RL = 1 k DG9408E Room - 159 - DG9409E Room - 79 - DG9408E Room - 179 - DG9409E Room - 98 - ns pC dB pF Power Supplies Power supply current I+ VEN = VA = 0 V or V+ Room 1 A Notes a. Leakage parameters are guaranteed by worst case test condition and not subject to production test. b. Room = 25 C, full = as determined by the operating temperature suffix. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. g. RDON = RDON max. - RDON min. h. Worst case isolation occurs on channel 4 due to proximity to the drain pin. i. RDON flatness is measured as the difference between the minimum and maximum measured values across a defined analog signal. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 6 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 1000 12 10 1st line 2nd line V+ = +5 V, I S = 50 mA 8 6 100 V+ = +12 V, IS = 50 mA 4 2 V+ = +16 V, IS = 50 mA 0 0 2 4 6 8 10 12 14 10 1000 +25 C V+ = +3 V IS = 5 mA 10 0.5 1.0 1.5 2.0 On-Resistance vs. Analog Voltage 5.0 +25 C 1000 100 2nd line RON - On-Reistance () +85 C -40 C 10000 TA = 25 C IS = 50 mA 2 6 8 V = 5 V 3.5 1000 3.0 2.5 2.0 100 1.5 V = 8 V 1.0 0.0 10 4 4.0 0.5 V+ = +12 V IS = 50 mA 10 10 -8 12 -6 -4 -2 +85 C 7.0 1000 1st line 2nd line 6.0 5.0 4.0 100 -40 C 2.0 V+ = +5 V IS = 50 mA 1 10 2 3 4 5 2nd line RON - On-Reistance () +25 C 0 6 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10000 +85 C +25 C 1000 100 -40 C V = 5 V IS = 50 mA -5 -4 -3 10 -2 -1 0 1 2 3 4 VD - Analog Voltage (V) 2nd line VD - Analog Voltage (V) 2nd line On-Resistance vs. Analog Voltage On-Resistance vs. Analog Voltage S16-1452-Rev. A, 25-Jul-16 8 1st line 2nd line 10000 3.0 4 Axis Title Axis Title 10.0 8.0 2 On-Resistance vs. Analog Voltage On-Resistance vs. Analog Voltage 9.0 0 VD - Analog Voltage (V) 2nd line VD - Analog Voltage (V) 2nd line 0.0 3.0 On-Resistance vs. Analog Voltage 4.5 1.0 2.5 VD - Analog Voltage (V) 2nd line 10000 0 2nd line RON - On-Reistance () 100 -40 C VD - Analog Voltage (V) 2nd line 1st line 2nd line 2nd line RON - On-Reistance () +85 C 0.0 16 Axis Title 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10000 1st line 2nd line 2nd line RON - On-Reistance () V+ = +3 V, IS = 5 mA 14 2nd line RON - On-Reistance () TA = 25 C 16 24 22 20 18 16 14 12 10 8 6 4 2 0 1st line 2nd line 10000 18 5 Document Number: 75375 7 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title IS(OFF) ID(OFF) 0 -50 1st line 2nd line 1000 ID(ON) -100 100 -150 -200 2nd line I+ - Supply Current (pA) 50 2nd line Leakage Current (pA) 100 000 10000 100 10 000 V = 12 V / 0 V VEN = VA = 0 V 1000 100 V = 5 V VEN = VA = 0 V V = 5 V -250 10 10 -5 -4 -3 -2 -1 0 1 2 3 4 -40 5 -20 0 20 40 60 80 VD - Analog Voltage (V) 2nd line Temperature (C) 2nd line Leakage Current vs. Analog Voltage Supply Current vs. Temperature 100 Axis Title Axis Title 10 1000 ID(OFF) -100 100 -150 -200 2nd line Loss, OIRR, XTALK (dB) 0 -50 -250 2 3 4 5 6 7 8 1000 -30 OIRR -40 -50 XTALK -60 100 -70 DG9408E V = 12 V / 0 V -80 -100 100K 10 1 -20 -90 V = +12 V / 0 V 0 Loss -10 1st line 2nd line 2nd line Leakage Current (pA) ID(ON) IS(OFF) 50 10000 0 1st line 2nd line 10000 100 10 1M 9 10 11 12 10M 100M 1G Frequency (Hz) 2nd line VD - Analog Voltage (V) 2nd line Loss, OIRR, XTALK vs. Frequency Leakage Current vs. Analog Voltage Axis Title Axis Title ID(ON), VD = -4.5 V 1200 1000 600 400 1000 1st line 2nd line 2nd line Leakage Current (pA) ID(OFF), VD = 4.5 V, VS = -4.5 V 1400 Loss -10 ID(ON), VD = 4.5 V 1600 10000 0 ID(OFF), VD = 1 V, VS = 4.5 V IS(OFF), VD = -4.5 V, VS = 4.5 V 100 IS(OFF), VD = 4.5 V, VS = -4.5 V 200 -20 1000 -30 -40 1st line 2nd line V = 5 V 1800 800 10000 2nd line Loss, OIRR, XTALK (dB) 2000 10 OIRR -50 XTALK -60 100 -70 DG9409E V = 12 V / 0 V -80 -90 0 -200 10 -40 -20 0 20 40 60 80 Temperature (C) 2nd line 100 -100 100K 10 1M 10M 100M 1G Frequency (Hz) 2nd line Loss, OIRR, XTALK vs. Frequency Leakage Current vs. Temperature S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 8 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title Axis Title 4.0 10000 10 000 1000 1st line 2nd line 1 0.1 0.01 100 0.001 0.0001 0.00001 10 100 1000 10K 100K 1M 10 10M 3.0 VIH = -40 C VIH = 25 C 2.0 1.5 100 1.0 VIL = 25 C 0.5 0 10 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 V+ - Supply Voltage (V) 2nd line Supply Current vs. Input Switching Frequency Switching Threshold vs. Supply Voltage Axis Title Axis Title 25 10000 V+ = 3 V, t ON 175 1000 150 V+ = 3 V, t OFF V+ = 5 V, tON 100 75 V+ = 5 V, tOFF 50 25 V+ = 12 V, tON -40 -20 0 20 40 60 80 0 -5 100 -10 -15 DG9409E -25 10 100 10 0 1 2 3 4 5 8 9 10 11 12 Switching Time vs. Temperature Charge Injection vs. Analog Voltage Axis Title 200 10000 V+ = 3 V, t TRANS- 10000 DG9408E 180 CD(ON) 160 V+ = 3 V, t TRANS+ 175 1000 125 V+ = 5 V, tTRANS- 1st line 2nd line 150 V+ = 5 V, tTRANS+ 100 75 V+ = 12 V, tTRANS+ 50 25 -20 0 20 140 1000 120 CD(OFF) 100 80 100 60 40 CS(OFF) 20 V+ = 12 V, tTRANS- 0 2nd line Capacitance (pF) 200 -40 7 VS - Analog Voltage (V) 2nd line Axis Title 100 6 Temperature (C) 2nd line 250 225 1000 5 -20 V+ = 12 V, tOFF 0 DG9408E 10 10 40 60 80 100 1st line 2nd line 100 15 1st line 2nd line 200 125 10000 V+ = 12 V 20 2nd line QINJ - Charge Injection (pC) 225 1st line 2nd line 2nd line tON(EN), tOFF(EN) - Switching Time (ns) VIL = 85 C Input Switching Frequency (Hz) 2nd line 250 2nd line tTRANS, - Transition Time (ns) 1000 2.5 1st line 2nd line 1000 10 2nd line VT - Switching Threshold (V) 3.5 100 2nd line I+ - Supply Current (A) 10000 V = 5 V 0 10 0 1 2 3 4 5 6 7 8 9 10 11 12 Temperature (C) 2nd line VANALOG (V) 2nd line Transition Time vs. Temperature Capacitance vs. Analog Voltage S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 9 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) Axis Title 10000 120 DG9409E CD(ON) 1000 80 1st line 2nd line 2nd line Capacitance (pF) 100 CD(OFF) 60 40 100 CS(OFF) 20 0 10 0 1 2 3 4 5 6 7 8 9 10 11 12 VANALOG (V) 2nd line Capacitance vs. Analog Voltage SCHEMATIC DIAGRAM (Typical Channel) V+ D A0 V+ VLevel Shift AX Decode/ Drive V- S1 VEN V- GND Sn V- Fig. 1 - S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 10 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TEST CIRCUITS V+ V+ A2 S1 A1 50 Logic Input S2 - S 7 A0 DG9408E S8 VS8 VAX GND 3V 50 % 0V VO D EN tr < 5 ns tf < 5 ns VS1 V- VS1 35 pF 300 90 % Switch Output V- VO 50 % V+ 90 % VS8 V+ A1 A0 tTRANS VS1b S1b S1 ON S1a - S4a, Da 50 DG9409E S4b EN GND VS4b VO Db V- S8 ON (DG9408) or S4 ON (DG9409) tTRANS Return to Specifications: Single Supply 12 V 35 pF 300 Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V V- Single Supply 3 V Fig. 2 - Transition Time V+ V+ S1 EN VS1 S2 - S 8 A0 DG9408E A1 A2 GND VO D V- 50 300 Logic Input tr < 5 ns tf < 5 ns 3V 50 % 0V 35 pF tOFF(EN) V- tON(EN) VO 90 % V+ Switch Output VO V+ S1b EN A0 A1 GND 0V VS1 S1a - S 4a, Da S2b - S4b Return to Specifications: DG9409E Db V- 50 300 90 % Single Supply 12 V VO 35 pF Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V Single Supply 3 V V- Fig. 3 - Enable Switching Time S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 11 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TEST CIRCUITS V+ Logic Input EN VS1 All S and Da tr < 5 ns tf < 5 ns 3V 50 % 0V A0 DG9408E DG9409E A1 A2 Db, D GND VO VS V- 50 V- 90 % Switch Output 300 35 pF VO tOPEN 0V Return to Specifications: Single Supply 12 V Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V Single Supply 3 V Fig. 4 - Break-Before-Make Interval V+ Rg V+ SX Logic Input EN Vg OFF ON OFF 0V A0 Channel Select 3V VO D A1 CL 1 nF A2 GND VO Switch Output V- V O is the measured voltage due to charge transfer error Q, when the channel turns off. Q = CL x VO V- Fig. 5 - Charge Injection V+ VIN Rg = 50 V+ SX EN S8 A0 D VOUT A1 A2 GND V- RL 50 VOff Isolation = 20 log VOUT VIN Fig. 6 - Off Isolation S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 12 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9408E, DG9409E www.vishay.com Vishay Siliconix TEST CIRCUITS V+ V+ S1 SX VIN RIN 50 S8 A0 Rg = 50 D VOUT A1 A2 GND EN RL 50 V- V- VOUT Crosstalk = 20 log VIN Fig. 7 - Crosstalk V+ VIN V+ S1 Rg = 50 A0 D VOUT A1 A2 GND EN V- RL 50 VInsertion Loss = 20 log VOUT VIN Fig. 8 - Insertion Loss V+ V+ S1 Meter A2 Channel Select S8 A1 A0 D GND EN V- HP4192A Impedance Analyzer or Equivalent f = 1 MHz V- Fig. 9 - Source Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?75375. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 13 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix QFN 4x4-16L Case Outline (5) (4) VARIATION 1 MILLIMETERS(1) DIM VARIATION 2 MILLIMETERS(1) INCHES INCHES MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX. A 0.75 0.85 0.95 0.029 0.033 0.037 0.75 0.85 0.95 0.029 0.033 0.037 A1 0 - 0.05 0 - 0.002 0 - 0.05 0 - 0.002 0.35 0.010 0.014 0.25 0.35 0.010 2.2 0.079 0.087 2.5 2.7 0.098 A3 b 0.20 ref. 0.25 D D2 0.30 0.008 ref. 4.00 BSC 2.0 2.1 0.012 0.20 ref. 0.157 BSC 0.083 0.30 4.00 BSC 2.6 e 0.65 BSC 0.026 BSC 0.65 BSC E 4.00 BSC 0.157 BSC 4.00 BSC E2 2.0 K L 2.1 2.2 0.079 0.20 min. 0.5 0.6 0.083 0.087 2.5 0.008 min. 0.7 0.020 0.024 0.008 ref. 2.6 0.3 0.4 0.014 0.157 BSC 0.102 0.106 0.026 BSC 0.157 BSC 2.7 0.098 0.20 min. 0.028 0.012 0.102 0.106 0.008 min. 0.5 0.012 0.016 N(3) 16 16 16 16 Nd(3) 4 4 4 4 Ne(3) 4 4 4 4 0.020 Notes (1) Use millimeters as the primary measurement. (2) Dimensioning and tolerances conform to ASME Y14.5M. - 1994. (3) N is the number of terminals. Nd and Ne is the number of terminals in each D and E site respectively. (4) Dimensions b applies to plated terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. (5) The pin 1 identifier must be existed on the top surface of the package by using identification mark or other feature of package body. (6) Package warpage max. 0.05 mm. ECN: S13-0893-Rev. B, 22-Apr-13 DWG: 5890 Revision: 22-Apr-13 Document Number: 71921 1 For technical questions, contact: powerictechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000