P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Features z z z z z z z z z z z z z Single fiber bi-directional operation Laser diode with multi-quantum- well structure Low threshold current InGaAs/InP PIN Photodiode with trans-impedance amplifier High sensitivity with AGC* Differential ended output Single +3.3V Power Supply Integrated WDM coupler Un-cooled operation from -40C to +85C Hermetically sealed active component SM/MM fiber pigtailed packaging with optional FC/ST/SC/MU/LC connector Design for fiber optic networks application RoHS Compliant available Absolute Maximum Ratings (Tc=25C) Parameter Symbol Rating Unit Pf 0.6(L)/1(M)/2(H) mW LD Reverse Voltage VRLD 2 V PIN-TIA Voltage VCC 4.5 V Operating Temperature Topr -40 ~ 85 C Storage Temperature Tstg -40 ~ 85 C Fiber Output Power L/M/H (All optical data refer to a coupled 9/125m SM & 50/125m MM fiber) Optical and Electrical Characteristics Parameter Symbol (Tc=25C) Min. Typ. Max. Unit Notes 0.2 - 0.5 0.5 - 1 mW CW, Ith+25mA, kink free 1 1.6 - 1530 1550 1570 nm CW, Pf = Pf(Min) - - 5 nm CW, Pf = Pf(Min) Threshold Current Ith - 10 15 mA CW Forward Voltage VF - 1.2 1.5 V CW, Pf = Pf(Min) Tr / Tf - - 0.5 ns Ibias=Ith, 10% to 90% Im 100 - - A CW, Pf = Pf(Min), VRPD = 2V Dark Current Idark - - 0.1 A VRPD = 5V Capacitance Ct - 6 15 pF VRPD = 5V, f = 1MHz Laser Diode L Optical Output Power M Pf H Peak Wavelength Spectrum Width (RMS) Rise Time / Fall Time Monitor Diode Monitor Current 1 DS-6002 Rev 0.0 2010-02-23 P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Module Tracking Error Pf/ Pf Optical Crosstalk -1.5 CRT - 1.5 < -45 dB APC, -40 to 85C dB - Note: 1. Pin assignment can be customized. 2. Specifications subject to change without notice. Detector =1100~1360nm DC Electrical Characteristics Parameter Symbol Min. Typ. Max. Unit Notes VCC 3 3.3 3.6 V - F02 - - 1000 F04 - 260 450 mV - F06 185 250 415 F02 - - 35 F04 - 21 30 mA - F06 - 26 50 Power Supply Differential Output Voltage Supply Current (no load) (Tc=25C) Vd ICC AC/Optical and Electrical Characteristics Parameter Symbol Min. Typ. Max. Unit Notes 1100 1310 1360 nm - F02 52 - 70 F04 6 7 - F06 1.92 2.5 3.4 F02 120 140 - F04 404 470 - F06 700 920 1100 F02 -3 0 - Detection Range Gain @10Mbps Differential Bandwidth Saturation Power Sensitivity Output Resistance G BW Psat Sens. Rout (Tc=25C) Measure differentially, AC coupled, RL=50 V/mW Measure differentially, AC coupled, RL=50 Measure differentially with 30uAp-p singnal MHz - -10 23 -10 23 -12 7 -10 23 -10 23 -12 7 BER<10 F04 -7 -6 - F06 -3 - - BER<10 F02 - -37 -35 BER<10 F04 - -33 -30 F06 - -26 -23 F02 - 50 - F04 48 50 52 F06 48 50 62 dBm dBm BER<10 BER<10 BER<10 @155Mbps PRBS2 -1, Er=10dB @622Mbps PRBS2 -1, Er=10dB @1.25Gbps PRBS2 -1, Er=10dB @155Mbps PRBS2 -1, Er=10dB @622Mbps PRBS2 -1, Er=10dB @1.25Gbps PRBS2 -1, Er=10dB - 2 DS-6002 Rev 0.0 2010-02-23 P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Pin Assignment LD Pin Assignment A Type D Type Pin 1 : Laser Cathode Pin 2 : Laser Anode and Case Gnd Pin 3 : Monitor Diode Anode Pin 4 : Monitor Diode Cathode Pin 1 : Laser Anode and Monitor Diode Cathode Pin 2 : Case Gnd Pin 3 : Laser Cathode Pin 4 : Monitor Diode Anode PIN-TIA Pin Assignment Imon Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F02 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic Imon Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F04 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic Imon Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F06 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic 3 DS-6002 Rev 0.0 2010-02-23 P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Packaging Dimensions (Units in mm) C-15/13-FXXM-PX-SXXX/XXX-XX Connector Type PIN-TIA FC/PC FC/APC DIMENSION: A:7.0~7.6 mm (Low & Middle power) A:9.3~9.9 mm (High power) SC/PC SC/APC LD ST/PC ST/APC MU/PC C-15/13-FXXM-PX-MXXX/XXX-XX LC/PC LC/APC PIN-TIA " LD " DIMENSION: A:7.2~9.2 mm 4 DS-6002 Rev 0.0 2010-02-23 P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Ordering Information C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Transmitter 1310nm Receiver M = with 5 pinout Fiber Output Power L/M/H Pin Assignment Blank=A Type D=D Type 02: 155 Mb/s PIN-TIA+3.3V 04: 622 Mb/s PIN-TIA+3.3V 06:1250 Mb/s PIN-TIA+3.3V Connector FC/ST/SC/MU/LC/Blank Fiber Application S=SM 9/125m M=MM 50/125m Blank=PC Fiber APC=APC Fiber (for single mode) RoHS Compliant Blank/G5/GR Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) GR = Full RoHS compliant product (no exemption) 5 DS-6002 Rev 0.0 2010-02-23 P/N: C-15/13-FXXM-PX-XXXX/XXX-XX 1550nm Emitting, 1310nm Receiving (PIN-TIA,5 pin-out, 3.3V) Bi-directional Diplexer Optical Module Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Source Photonics's sole and absolute discretion. Source Photonics warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and Source Photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fi tness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. Source Photonics assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Source Photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Source Photonics for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. (c) Copyright Source Photonics, Inc. 2010 All rights reserved 6 DS-6002 Rev 0.0 2010-02-23