ATP206 Ordering number : ENA1395A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET ATP206 General-Purpose Switching Device Applications Features * * * Low ON-resistance 4.5V drive Halogen free compliance Large current Slim package Protection diode in * * * Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (PW10s) Allowable Power Dissipation Unit 40 PW10s, duty cycle1% V 40 A 120 A 40 W Channel Temperature PD Tch 150 C Storage Temperature Tstg --55 to +150 C Avalanche Energy (Single Pulse) *1 EAS IAV 26 mJ 20 A Avalanche Current *2 Tc=25C V 20 Note : *1 VDD=10V, L=100H, IAV=20A *2 L100H, Single pulse Package Dimensions Product & Package Information unit : mm (typ) 7057-001 * Package : ATPAK * JEITA, JEDEC :* Minimum Packing Quantity : 3,000 pcs./reel ATP206-TL-H 1.5 6.5 0.4 0.4 0.5 4 Packing Type: TL 4.6 2.6 Marking ATP206 TL 6.05 4.6 9.5 7.3 LOT No. Electrical Connection 2.3 0.6 2.3 0.55 0.7 3 0.1 0.5 1 0.8 1.7 2,4 2 0.4 1 : Gate 2 : Drain 3 : Source 4 : Drain 1 3 SANYO : ATPAK http://semicon.sanyo.com/en/network 61312 TKIM/10709PA MS IM TC-00001774 No. A1395-1/7 ATP206 Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current IGSS Cutoff Voltage VGS(off) Forward Transfer Admittance | yfs | Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 Input Capacitance Ciss Output Capacitance Coss Conditions Ratings min typ Unit max 40 ID=1mA, VGS=0V VDS=40V, VGS=0V VGS=16V, VDS=0V VDS=10V, ID=1mA V 1.5 9 VDS=10V, ID=20A ID=20A, VGS=10V ID=10A, VGS=4.5V VDS=20V, f=1MHz 1 A 10 A 2.6 15 V S 12 16 m 20 28 m 1630 pF 205 pF Reverse Transfer Capacitance Crss 110 pF Turn-ON Delay Time td(on) 19 ns Rise Time tr 110 ns Turn-OFF Delay Time td(off) 83 ns Fall Time tf 73 ns Total Gate Charge Qg 27 nC Gate-to-Source Charge Qgs 7.0 nC Gate-to-Drain "Miller" Charge Qgd Diode Forward Voltage VSD See specified Test Circuit. VDS=20V, VGS=10V, ID=40A 5.2 IS=40A, VGS=0V 0.99 nC 1.2 V Switching Time Test Circuit 10V 0V VDD=20V VIN ID=20A RL=1 VIN D PW=10s D.C.1% VOUT G ATP206 P.G 50 S Ordering Information Device ATP206-TL-H Package Shipping memo ATPAK 3,000pcs./reel Pb Free and Halogen Free No. A1395-2/7 ATP206 VGS=3.5V 0.5 1.0 1.5 Drain-to-Source Voltage, VDS -- V Static Drain-to-Source On-State Resistance, RDS(on) -- m Single pulse Tc=25C 35 30 25 20 ID=10A 20A 15 10 5 0 2 3 4 5 6 7 8 9 10 11 12 13 14 Gate-to-Source Voltage, VGS -- V = Tc 5C --2 3 75 C 2 1.0 5 7 1.0 2 3 5 7 10 2 Drain Current, ID -- A 3 5 7 20 A =20 V, I D 0 . 0 =1 VGS 15 10 5 --20 0 20 tf 3 tr td(on) 2 40 60 80 100 120 140 160 IT14336 IS -- VSD VGS=0V Single pulse 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0 0.2 0.4 0.6 0.8 1.0 1.2 IT14338 Ciss, Coss, Crss -- VDS f=1MHz Ciss, Coss, Crss -- pF 5 6.0 A 2 7 5.5 IT14334 3 2 100 5.0 =10 V, I D 5 . 4 = VGS 25 5 td (off) 4.5 Diode Forward Voltage, VSD -- V VDD=20V VGS=10V 3 4.0 Single pulse IT14337 SW Time -- ID 5 3.5 30 0.01 7 5 3 2 0.001 5 3 3.0 35 100 7 5 3 2 7 2 2.5 Case Temperature, Tc -- C Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S 5 2.0 RDS(on) -- Tc 0 --60 --40 16 C 25 7 3 0.1 Switching Time, SW Time -- ns 15 1.5 40 2 10 1.0 Gate-to-Source Voltage, VGS -- V VDS=10V 3 0.5 IT14335 | yfs | -- ID 5 0 IT14333 RDS(on) -- VGS 40 0 2.0 Static Drain-to-Source On-State Resistance, RDS(on) -- m 0 Tc= --25 C 75C 10 5 0 20 --25 C 10 25 C 15 30 C 4.0V --25 20 40 5C 25C 25 Tc= 75 C Drain Current, ID -- A 8 .0 50 V 30 Tc= 7 6.0V VDS=10V V 4.5 16.0V 10.0 Drain Current, ID -- A V 35 ID -- VGS 60 Tc=25C 25 C ID -- VDS 40 Ciss 1000 7 5 3 Coss 2 Crss 10 100 7 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain Current, ID -- A 2 3 5 7 100 IT14339 5 0 5 10 15 20 25 30 Drain-to-Source Voltage, VDS -- V 35 40 IT14340 No. A1395-3/7 ATP206 VGS -- Qg 10 8 7 6 5 4 3 3 2 5 10 15 25 20 Total Gate Charge, Qg -- nC PD -- Tc 35 30 25 20 15 10 5 0 20 40 60 80 100 120 Case Temperature, Tc -- C 140 160 IT14343 1m s DC op er s ati on Tc=25C Single pulse 2 3 5 7 1.0 2 3 5 7 10 2 Drain-to-Source Voltage, VDS -- V EAS -- Ta 120 40 0 Operation in this area is limited by RDS(on). IT14341 Avalanche Energy derating factor -- % Allowable Power Dissipation, PD -- W 45 0m m 0.1 0.1 30 10 10 3 2 1 PW10s 1 10 0s 0 s s 10 7 5 1.0 7 5 0 ID=40A 3 2 2 0 IDP=120A 100 7 5 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 9 ASO 3 2 VDS=20V ID=40A 3 5 7 IT14342 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- C 150 175 IT10478 No. A1395-4/7 ATP206 Taping Specification ATP206-TL-H No. A1395-5/7 ATP206 Outline Drawing ATP206-TL-H Land Pattern Example Mass (g) Unit 0.266 mm * For reference Unit: mm 6.7 6.5 1.6 2 1.5 2.3 2.3 No. A1395-6/7 ATP206 Note on usage : Since the ATP206 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A1395-7/7