1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
One world. One KEMET
Benets
• High CV value
• Long life, up to 29,000 hours at +85°C (VR, IR applied)
• Low ESR and ESL
• Compact size
• Optimized designs available upon request
Overview
The KEMET PEH200 capacitors have polarized all-welded
design, heavy duty screw terminals, extended cathode
construction, safety vent, and plastic insulation. The
sealing system is designed for electrolyte leakage-
free operation and a very low gas-diffusion rate of an
electrolyte. Mechanical contact between the winding
and aluminum case allows excellent heat transfer from
the winding hot-spot to the ambient, which means cooler
operation and very high current ratings.
Applications
Typical applications for KEMET's PEH200 capacitor include
uninterruptible power supplies (UPS), ground power units
(GPU), welding equipment, and drives where high current
ratings and compact size are important.
Screw Terminal Aluminum Electrolytic Capacitors
PEH200, +85°C
Part Number System
PEH200 H A 515 0 M U2
Series Rated Voltage (VDC) Size Code
Capacitance Code
(µF) Version Capacitance
Tolerance Stud Option
Screw Terminal
Aluminum
Electrolytic
H = 25
K = 40
M = 63
P = 100
S = 250
U = 350
X = 385
V = 400
O = 420
Y = 450
Z = 500
See Dimension
table
The last two
digits represent
signicant
gures. The
rst digit
species the
total number of
digits.
0 = Standard M = ±20% U2 = Plain Can
B2 = Threaded
mounting stud
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Performance Characteristics
Item Performance Characteristics
Capacitance Range 100 – 330,000 µF
Rated Voltage 25 – 500 VDC
Operating Temperature −40 to +85°C
Capacitance Tolerance ±20% at 100 Hz/+20°C
Operational Lifetime
D (mm)
Rated Voltage and Ripple Current at
+85°C (hours)
Rated Voltage at +85°C (hours)
35
10,000
50
12,000
65
15,000
75
19,000
90
29,000
60,000
Shelf Life 2,000 hours at +85°C or 4 years at +40°C 0 VDC
Leakage Current I = 0.003 CV + 4000 (µA) (VR < 500 VDC)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Vibration Test Specications
Procedure Requirements
D ≤ 50 mm
0.75 mm displacement amplitude or
10 g maximum acceleration.
Vibration applied for three 2-hour
sessions at 10 – 500 Hz
(Capacitor clamped by body).
No leakage of electrolyte or
other visible damage. Deviations
in capacitance from initial
measurements must not exceed: Δ
C/C < 5%
D > 50 mm
0.75 mm displacement amplitude or
10 g maximum acceleration.
Vibration applied for three 2-hour
sessions at 10 – 55 Hz
(Capacitor clamped by body).
Standards IEC 60384–4 long life grade 40/85/56
Test Method & Performance
Endurance Life Test
Conditions Performance
Temperature +85°C
Test Duration 2,000 hours
Ripple Current Maximum ripple current specied in table
Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
Performance The following specications will be satised when the capacitor is tested at +20°C:
Capacitance Change
≤ 100 V Within 15% of the initial value
> 100 V Within 10% of the initial value
Equivalent Series Resistance Does not exceed 200% of the initial value
Leakage Current Does not exceed leakage current limit
3© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Dimensions – Millimeters
L1
SIDE VIEW OVAL TERMINAL
END VIEW
D
Optional Mounting
Stud (M x S)
ROUND TERMINAL
END VIEW
L2
a+DT
Safety Vent
Polarity
Mark
L3
+DT
Safety Vent
Polarity
Mark
b
(D > 36.6)
Reference Size
(mm) Size Code
Dimensions in mm Mounting Stud
(M x S)
Approximate
Weight
Grams
DL1 L2 L3 a
±1.0 ±1.0 ±1.0 ±1.0 ±0.5 Nominal
35 x 51
A
36.6
51.5
54.5
58.9
13.0
M8 x 12
70
35 x 60
B
36.6
59.5
62.5
66.9
13.0
M8 x 12
85
35 x 75
C
36.6
73.5
76.5
80.9
13.0
M8 x 12
105
35 x 95
D
36.6
94.5
97.5
101.9
13.0
M8 x 12
130
50 x 49
G
51.6
48.5
51.5
56.4
22.0
M12 x 16
150
50 x 75
H
51.6
74.5
77.5
82.4
22.0
M12 x 16
180
50 x 95
J
51.6
95.5
98.5
103.4
22.0
M12 x 16
240
50 x 105
K
51.6
103.5
106.5
111.4
22.0
M12 x 16
265
50 x 115
I
51.6
115.5
118.5
123.4
22.0
M12 x 16
300
65 x 105
O
66.6
106.0
109.2
113.0
28.5
M12 x 16
415
65 x 115
Q
66.6
118.0
121.2
125.0
28.5
M12 x 16
460
65 x 130
S
66.6
129.0
132.2
136.0
28.5
M12 x 16
520
65 x 140
R
66.6
141.0
144.2
148.0
28.5
M12 x 16
650
75 x 78
L
76.6
77.0
80.2
84.0
32.0
M12 x 16
430
75 x 98
P
76.6
98.0
101.2
105.0
32.0
M12 x 16
530
75 x 105
T
76.6
106.0
109.2
113.0
32.0
M12 x 16
585
75 x 115
U
76.6
118.0
121.2
125.0
32.0
M12 x 16
640
75 x 145
V
76.6
146.0
149.2
153.0
32.0
M12 x 16
800
75 x 220
X
76.6
221.0
224.2
228.0
32.0
M12 x 16
1400
90 x 78
M
91.6
76.5
79.7
83.4
32.0
M12 x 16
750
90 x 98
N
91.6
97.5
100.7
104.4
32.0
M12 x 16
950
90 x 145
Y
91.6
145.5
148.7
152.4
32.0
M12 x 16
1400
90 x 220
Z
91.6
220.0
224.2
226.9
32.0
M12 x 16
1500
Note: Dimensions include sleeving. Additional case sizes available on request
4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Termination Table
Reference
Diameter Thread Termination
Style
Dimensions in mm
DT b
35
M5
Round
8
50
M5
Oval
15
13
65
M5
Oval
15
13
75
M5
Oval
15
13
90
M5
Oval
15
13
Note: M6 and other termination options available on request
Case Polarity
Due to the presence of electrolyte in the capacitor, the aluminum can and stud mounting will essentially be at the same
polarity as the negative terminal. We recommend that the stud and can be insulated (see accessories for insulating nuts).
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change signicantly after extended storage periods, however,
the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three
years at 40°C. See sectional specication under each product for specic data.
Re-age (Reforming) Procedure
Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen
to a steady value below the specied limit. During re-aging, a maximum charging current of twice the specied leakage
current or 5 mA (whichever is greater) is suggested.
5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Reliability
The reliability of a component can be dened as the probability that it will perform satisfactorily under a given set of
conditions for a given length of time.
In practice, it is impossible to predict with absolute certainty how any individual component will perform. Therefore, we
must utilize probability theory. It is also necessary to clearly dene the level of stress involved (e.g., operating voltage, ripple
current, temperature and time.) Finally, the meaning of satisfactory performance must be dened by specifying a set of
conditions which determine the end of life of the component.
Reliability as a function of time, R(t), is normally expressed as: R(t) = e-λt ,where R(t) is the probability that the component will
perform satisfactorily for time t, and λ is the failure rate.
Failure Rate
The failure rate is the number of components failing per unit of time. The failure rate of most electronic components follows
the characteristic pattern:
• Early failures are removed during the manufacturing process.
• The operational life is characterized by a constant failure rate.
• The wear out period is characterized by a rapidly increasing failure rate.
The failures in time (FIT) are given with a 60% condence level for the various type codes. By convention, FIT is expressed
as 1 x 10-9 failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours, e.g., 100 FIT = 1 x 10-7
failures per hour = 0.01%/1,000 hours.
End of Life Denition
Catastrophic Failure: short circuit, open circuit or safety vent operation
Parametric Failure:
• Change in capacitance > ±10%
• Leakage current > specied limit
• ESR > 2 x initial ESR value
6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
MTBF
The mean time between failures (MTBF) is simply the inverse of the failure rate.
MTBF = 1/λ
wear out
early failures
operational life
Failure Rate
Time
The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for
life tests. An estimation is also given at 60°C.
The expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural
similarity.
Ta Failure Rate per Hour
85°C 1,000 FIT
60°C 100 FIT
Failure rate per hour includes both catastrophic and parametric failures.
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like
China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic
equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulll
these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed
from all designs to fulll the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will
closely follow any changes in legislation world wide and make any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Because of customer requirements, there may appear additional markings such as lead-free (LF) or lead-free wires (LFW) on
the label.
7© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Table 1 – Ratings & Part Number Reference
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2 2 m/s forced air, studmounted on 3°C/W aluminum chassis.
VDC
Rated
Capacitance Size
Code
Reference
Size Ripple Current Maximum ESR
Maximum LESL Part Number
100 Hz
25°C (µF)
D x L (mm)
100 Hz
85°C (A)
10 kHz
50°C (A)
2
10 kHz
40°C (A)
100 Hz
20°C (mΩ)
100 kHz
20°C (mΩ)
Approximate (nH)
25 15000 A 35 x 51 11.9 28.7 19.0 25 21 12 PEH200HA5150M(1)
25 22000 C 35 x 75 15.2 34.3 24.4 17 14 12 PEH200HC5220M(1)
25 33000 D 35 x 95 17.8 38.0 28.1 12 10 12 PEH200HD5330M(1)
25 47000 H 50 x 75 20.2 43.3 30.1 11 10 16 PEH200HH5470M(1)
25 68000 J 50 x 95 23.4 47.4 34.6 8 7 16 PEH200HJ5680M(1)
25 100000 K 50 x 105 23.9 46.1 34.7 7 7 16 PEH200HK6100M(1)
25 150000 O 65 x 105 26.3 50.0 37.2 7 7 16 PEH200HO6150M(1)
25 220000 T 75 x 105 35.0 63.6 49.5 5 5 17 PEH200HT6220M(1)
25 330000 V 75 x 145 40.0 73.1 56.9 4 4 17 PEH200HV6330M(1)
40 6800 A 35 x 51 9.9 27.2 18.1 33 25 12 PEH200KA4680M(1)
40 10000 B 35 x 60 12.0 31.5 21.4 23 18 12 PEH200KB5100M(1)
40 15000 C 35 x 75 14.6 36.1 25.5 16 12 12 PEH200KC5150M(1)
40 22000 D 35 x 95 17.1 39.8 29.2 12 912 PEH200KD5220M(1)
40 33000 H 50 x 75 18.9 41.1 28.8 11 916 PEH200KH5330M(1)
40 47000 J 50 x 95 22.1 46.3 33.6 8 7 16 PEH200KJ5470M(1)
40 68000 O 65 x 105 25.2 49.9 35.6 7 7 16 PEH200KO5680M(1)
40 100000 O 65 x 105 24.9 46.3 36.9 8 8 16 PEH200KO6100M(1)
40 150000 U 75 x 115 35.7 67.7 51.2 5 4 17 PEH200KU6150M(1)
40 220000 V 75 x 145 34.4 62.3 48.9 5 5 17 PEH200KV6220M(1)
63 4700 A 35 x 51 9.0 26.8 18.0 32 21 12 PEH200MA4470M(1)
63 6800 C 35 x 75 11.5 32.7 23.5 21 14 12 PEH200MC4680M(1)
63 10000 D 35 x 95 13.6 36.0 27.0 15 10 12 PEH200MD5100M(1)
63 15000 H 50 x 75 16.1 37.3 26.5 14 11 16 PEH200MH5150M(1)
63 22000 J 50 x 95 19.0 42.0 30.9 10 816 PEH200MJ5220M(1)
63 33000 O 65 x 105 22.8 45.9 34.8 10 816 PEH200MO5330M(1)
63 47000 O 65 x 105 21.8 42.7 32.0 10 916 PEH200MO5470M(1)
63 68000 U 75 x 115 31.5 61.3 46.8 6 5 17 PEH200MU5680M(1)
63 100000 V 75 x 145 34.3 62.2 50.3 5 5 17 PEH200MV6100M(1)
100 1500 A 35 x 51 5.7 18.0 12.1 92 63 12 PEH200PA4150M(1)
100 2200 B 35 x 60 7.0 21.3 14.7 63 44 12 PEH200PB4220M(1)
100 3300 C 35 x 75 8.7 25.0 17.8 43 30 12 PEH200PC4330M(1)
100 4700 D 35 x 95 10.3 28.9 21.1 31 21 12 PEH200PD4470M(1)
100 6800 H 50 x 75 12.7 30.4 21.5 33 27 16 PEH200PH4680M(1)
100 10000 J 50 x 95 15.3 34.7 25.6 23 19 16 PEH200PJ5100M(1)
100 15000 K 50 x 105 17.3 37.6 27.9 17 14 16 PEH200PK5150M(1)
100 22000 O 65 x 105 19.3 38.7 30.1 15 13 16 PEH200PO5220M(1)
100 33000 T75 x 105 26.3 53.0 39.8 10 817 PEH200PT5330M(1)
100 47000 V 75 x 145 30.8 60.5 47.3 7 6 17 PEH200PV5470M(1)
250 330 A 35 x 51 2.2 13.5 8.7 330 170 12 PEH200SA3330M(1)
250 470 B 35 x 60 2.7 15.9 10.6 240 120 12 PEH200SB3470M(1)
250 680 C 35 x 75 3.4 18.7 13.0 160 84 12 PEH200SC3680M(1)
250 1000 D 35 x 95 4.1 21.2 15.6 110 58 12 PEH200SD4100M(1)
250 1000 G 50 x 49 4.3 20.7 12.6 120 69 16 PEH200SG4100M(1)
250 1500 H 50 x 75 5.9 28.7 19.5 78 42 16 PEH200SH4150M(1)
250 2200 J 50 x 95 7.3 32.5 23.2 54 29 16 PEH200SJ4220M(1)
250 3300 O 65 x 105 10.0 39.8 29.4 38 22 16 PEH200SO4330M(1)
250 3300 L 75 x 78 10.5 43.8 29.6 38 22 17 PEH200SL4330M(1)
250 4700 O 65 x 105 11.3 38.2 27.2 29 18 16 PEH200SO4470M(1)
250 4700 M 90 x 78 12.7 44.2 30.4 30 18 16 PEH200SM4470M(1)
250 6800 T 75 x 105 14.7 51.5 36.5 20 12 17 PEH200ST4680M(1)
250 6800 N 90 x 98 15.8 52.1 37.3 21 13 16 PEH200SN4680M(1)
250 10000 V 75 x 145 18.0 59.0 44.0 14 917 PEH200SV5100M(1)
250 12000 V 75 x 145 18.8 58.6 43.6 14 917 PEH200SV512AM(1)
250 15000 X 75 x 220 20.6 61.6 49.2 10 617 PEH200SX5150M(1)
250 15000 Y 90 x 145 21.8 60.1 45.5 12 816 PEH200SY5150M(1)
350 220 A 35 x 51 2.0 13.7 8.8 360 170 12 PEH200UA3220M(1)
350 330 B 35 x 60 2.6 16.6 11.0 240 110 12 PEH200UB3330M(1)
350 470 C 35 x 75 3.2 19.3 13.4 170 79 12 PEH200UC3470M(1)
VDC Rated
Capacitance
Size
Code Reference Size Ripple Current ESR LESL Part Number
8© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Table 1 – Ratings & Part Number Reference cont'd
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2 2 m/s forced air, studmounted on 3°C/W aluminum chassis.
VDC
Rated
Capacitance Size
Code
Reference
Size Ripple Current Maximum ESR
Maximum LESL Part Number
100 Hz
25°C (µF)
D x L (mm)
100 Hz
85°C (A)
10 kHz
50°C (A)
2
10 kHz
40°C (A)
100 Hz
20°C (mΩ)
100 kHz
20°C (mΩ)
Approximate (nH)
350 680 D 35 x 95 3.8 21.9 16.0 120 55 12 PEH200UD3680M(1)
350 680 G 50 x 49 4.0 20.7 12.6 130 66 16 PEH200UG3680M(1)
350 1000 H 50 x 75 5.5 28.8 19.5 85 41 16 PEH200UH4100M(1)
350 1500 J 50 x 95 6.8 32.9 23.4 57 28 16 PEH200UJ4150M(1)
350 2200 O 65 x 105 9.4 39.8 29.2 41 21 16 PEH200UO4220M(1)
350 2200 L 75 x 78 9.8 43.5 29.4 41 21 17 PEH200UL4220M(1)
350 3300 O 65 x 105 10.9 38.6 27.5 31 17 16 PEH200UO4330M(1)
350 3300 M 90 x 78 13.1 54.0 37.0 28 15 16 PEH200UM4330M(1)
350 4700 U 75 x 115 14.5 54.7 39.5 20 11 17 PEH200UU4470M(1)
350 4700 N 90 x 98 15.0 51.3 36.7 22 13 16 PEH200UN4470M(1)
350 6800 V 75 x 145 16.8 57.0 42.3 15 817 PEH200UV4680M(1)
350 10000 X 75 x 220 19.4 60.8 48.5 11 717 PEH200UX5100M(1)
350 10000 Y 90 x 145 23.3 75.2 56.9 11 616 PEH200UY5100M(1)
350 15000 Z 90 x 220 27.3 79.8 64.4 8 5 16 PEH200UZ515AM(1)
385 220 A 35 x 51 2.1 14.6 9.3 330 150 12 PEH200XA3220M(1)
385 330 C 35 x 75 2.7 17.0 12.0 220 97 12 PEH200XC3330M(1)
385 470 D 35 x 95 3.3 19.1 14.2 150 69 12 PEH200XD3470M(1)
385 470 G 50 x 49 3.6 20.9 12.8 160 78 16 PEH200XG3470M(1)
385 680 H 50 x 75 4.7 26.8 18.4 110 51 16 PEH200XH3680M(1)
385 1000 J 50 x 95 5.9 31.7 22.8 76 35 16 PEH200XJ4100M(1)
385 1500 K 50 x 105 7.1 34.1 24.7 52 25 16 PEH200XK4150M(1)
385 2200 O 65 x 105 9.6 36.7 26.1 38 20 16 PEH200XO4220M(1)
385 2200 L 75 x 78 10.0 42.7 28.8 38 20 17 PEH200XL4220M(1)
385 3300 T 75 x 105 12.8 52.5 37.4 25 13 17 PEH200XT4330M(1)
385 3300 M 90 x 78 13.3 52.6 36.0 26 14 16 PEH200XM4330M(1)
385 4700 V 75 x 145 15.2 57.6 43.9 19 11 17 PEH200XV4470M(1)
385 4700 N 90 x 98 16.6 62.4 44.4 19 10 16 PEH200XN4470M(1)
385 6800 Y 90 x 145 20.9 74.8 57.2 14 816 PEH200XY4680M(1)
385 6800 X 75 x 220 17.4 58.9 47.0 14 817 PEH200XX4680M(1)
400 220 A 35 x 51 2.2 11.4 9.6 310 130 12 PEH200VA3220M(1)
400 330 C 35 x 75 2.8 14.3 12.6 210 90 12 PEH200VC3330M(1)
400 470 D 35 x 95 3.4 16.5 14.8 140 63 12 PEH200VD3470M(1)
400 470 G 50 x 49 3.7 15.0 12.7 150 73 16 PEH200VG3470M(1)
400 680 H 50 x 75 4.9 21.2 18.3 110 55 16 PEH200VH3680M(1)
400 1000 J 50 x 95 5.9 24.2 21.3 76 38 16 PEH200VJ4100M(1)
400 1500 O 65 x 105 9.1 49.1 35.1 53 27 16 PEH200VO415AQ(1)
400 1500 L75 x 78 8.8 34.0 29.0 52 27 17 PEH200VL4150M(1)
400 2200 O 65 x 105 9.6 29.1 25.6 39 21 16 PEH200VO4220M(1)
400 2200 M 90 x 78 11.8 44.1 37.1 36 19 16 PEH200VM4220M(1)
400 3300 O 65 x 105 11.0 30.5 26.7 29 16 16 PEH200VO433AM(1)
400 3300 U 75 x 115 13.8 52.0 45.7 22 10 17 PEH200VU433AQ(1)
400 3300 N 90 x 98 14.9 52.8 45.2 25 13 16 PEH200VN4330M(1)
400 3300 T 75 x 105 13.0 41.5 36.3 26 14 17 PEH200VT4330M(1)
400 4700 V 75 x 145 15.6 57.0 42.5 18 10 17 PEH200VV447AM(1)
400 6800 X 75 x 220 17.6 51.2 47.7 13 817 PEH200VX4680M(1)
400 6800 Y 90 x 145 21.4 64.1 56.8 13 716 PEH200VY4680M(1)
400 10000 Z 90 x 220 24.7 69.2 64.0 9 5 16 PEH200VZ5100M(1)
420 150 A 35 x 51 1.8 12.1 7.8 400 170 12 PEH200OA3150M(1)
420 220 C 35 x 75 2.3 14.3 10.3 270 110 12 PEH200OC3220M(1)
420 330 D 35 x 95 2.9 16.3 12.3 180 76 12 PEH200OD3330M(1)
420 330 G 50 x 49 3.2 20.4 12.6 190 80 16 PEH200OG3330M(1)
420 470 H 50 x 75 4.2 24.8 17.0 140 62 16 PEH200OH3470M(1)
420 680 J 50 x 95 5.1 28.1 20.4 96 44 16 PEH200OJ3680M(1)
420 1000 K 50 x 105 6.3 32.0 23.2 67 31 16 PEH200OK4100M(1)
420 1500 O 65 x 105 8.8 38.9 28.4 47 23 16 PEH200OO4150M(1)
420 1500 L 75 x 78 9.1 42.3 28.5 47 23 17 PEH200OL4150M(1)
420 2200 T 75 x 105 11.5 51.6 37.0 32 16 17 PEH200OT4220M(1)
420 2200 M 90 x 78 12.2 52.7 36.0 33 17 16 PEH200OM4220M(1)
VDC Rated
Capacitance
Size
Code Reference Size Ripple Current ESR LESL Part Number
9© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Table 1 – Ratings & Part Number Reference cont'd
(1) Mounting Code: U2 = plain can, B2 = threaded mounting stud
2 2 m/s forced air, studmounted on 3°C/W aluminum chassis.
VDC
Rated
Capacitance Size
Code
Reference
Size Ripple Current Maximum ESR
Maximum LESL Part Number
100 Hz
25°C (µF)
D x L (mm)
100 Hz
85°C (A)
10 kHz
50°C (A)
2
10 kHz
40°C (A)
100 Hz
20°C (mΩ)
100 kHz
20°C (mΩ)
Approximate (nH)
420 2700 O 65 x 105 12.4 5 7.3 40.1 24 10 16 PEH200OO427AM(1)
420 3300 V 75 x 145 14.0 57.5 43.7 22 11 17 PEH200OV4330M(1)
420 3300 N 90 x 98 15.4 61.9 44.0 22 12 16 PEH200ON4330M(1)
420 4700 X 75 x 220 15.7 57.6 46.8 16 817 PEH200OX4470M(1)
420 4700 Y 90 x 145 18.2 62.2 47.5 17 916 PEH200OY4470M(1)
420 8200 Z 90 x 220 23.8 77.3 63.1 10 516 PEH200OZ4820M(1)
450 150 A 35 x 51 2.0 14.6 9.3 350 150 12 PEH200YA3150M(1)
450 220 C 35 x 75 2.5 16.8 11.9 240 99 12 PEH200YC3220M(1)
450 330 D 35 x 95 3.1 19.4 14.5 160 66 12 PEH200YD3330M(1)
450 330 G 50 x 49 3.5 20.8 12.7 170 75 16 PEH200YG3330M(1)
450 470 H 50 x 75 4.5 25.5 17.5 120 58 16 PEH200YH3470M(1)
450 680 J 50 x 95 5.5 28.8 20.8 86 41 16 PEH200YJ3680M(1)
450 1000 K 50 x 105 6.7 32.7 23.6 60 29 16 PEH200YK4100M(1)
450 1500 O 65 x 105 9.3 39.2 28.2 43 22 16 PEH200YO4150M(1)
450 1500 L 75 x 78 9.6 42.3 28.5 43 22 17 PEH200YL4150M(1)
450 1800 O 65 x 105 10.6 47.8 34.0 43 22 17 PEH200YO418AM(1)
450 2200 T 75 x 105 12.1 50.1 35.6 29 15 17 PEH200YT4220M(1)
450 2200 M 90 x 78 12.7 52.4 35.8 30 16 16 PEH200YM4220M(1)
450 3300 V 75 x 145 14.7 57.3 43.7 20 10 17 PEH200YV4330M(1)
450 3300 N 90 x 98 16.1 61.9 43.9 21 11 16 PEH200YN4330M(1)
450 4700 X 75 x 220 16.8 59.3 47.6 14 817 PEH200YX4470M(1)
450 4700 Y 90 x 145 18.9 61.4 46.9 16 916 PEH200YY4470M(1)
450 8200 Z 90 x 220 24.9 77.7 63.4 10 516 PEH200YZ4820M(1)
500 100 A 35 x 51 1.5 6.1 3.9 1290 760 12 PEH200ZA3100M(1)
500 150 B 35 x 60 1.9 7.5 4.9 670 390 12 PEH200ZB3150M(1)
500 220 C 35 x 75 2.3 8.4 5.8 570 345 12 PEH200ZC3220M(1)
500 220 G 50 x 49 2.5 10.1 6.1 595 365 12 PEH200ZG3220M(1)
500 330 D 35 x 95 2.9 10.7 7.7 390 234 12 PEH200ZD3330M(1)
500 470 H 50 x 75 4.2 15.8 10.5 280 165 16 PEH200ZH3470M(1)
500 680 J 50 x 95 5.1 18.4 12.8 195 115 16 PEH200ZJ3680M(1)
500 1000 O 65 x 105 6.8 21.4 15.5 130 79 16 PEH200ZO4100M(1)
500 1500 T 75 x 105 9.2 29.8 21.0 90 57 17 PEH200ZT4150M(1)
500 1800 O 65 x 105 10.6 40.9 28.2 71 45 16 PEH200ZO418HM(1)
500 2200 V 75 x 145 11.1 33.7 25.1 62 40 17 PEH200ZV4220M(1)
500 3300 X 75 x 220 12.8 36.5 29.0 43 28 17 PEH200ZX4330M(1)
500 3300 Y 90 x 145 15.7 46.9 35.4 38 24 16 PEH200ZY4330M(1)
500 5600 Z90 x 220 19.6 53.4 42.6 31 21 16 PEH200ZZ4560M(1)
VDC Rated
Capacitance
Size
Code Reference Size Ripple Current ESR LESL Part Number
10© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Mechanical Data
Polarity and Reversed Voltage
Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such,
they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were
to be reversed then the electrolytic process that took place in forming the oxide layer on the anode would be recreated in
trying to form an oxide layer on the cathode. In forming the cathode foil in this way, heat would be generated and gas given
off within the capacitor, usually leading to catastrophic failure.
The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage
of approximately 2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this
voltage, the formation process will commence. Aluminium Electrolytic capacitors can also be manufactured for use in
intermittent AC applications by using two anode foils in place of one anode and one cathode.
Mounting Position
The capacitor can be mounted upright or inclined to a horizontal position.
Clamp Fixing
Clips must be ordered separately.
Stud Fixing
Nylon cap nut must be ordered separately. For the stud xing insulated version, the outer insulation serves as lock washer.
Maximum tightening torque:
M8 = 3 Nm
M12= 8 Nm
Maximum chassis thickness 5 mm.
Screw Terminals
M5 x 10 according to DIN 41.248.
Maximum tightening torque = 2.5 Nm.
Must be ordered separately.
Recommended maximum connector thickness with delivered screw = 4 mm. M6 thread upon request.
Insulating Cup
PEH200 is supplied with a 0.8 mm thick polypropylene insulating cup. Voltage proof of the insulating cup: ≥ 4,000 VDC
11© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Marking
KEMET Logo
Rated Capacitance
Rated Voltage (VDC)
Operating Temperature
Part Number Code
Date of Manufacture,
Batch Number
Made in The
European Union
Capacitance Tolerance
Construction
Detailed Cross Section
Margin
Safety Vent
Screw Terminal
Laser Welded
Terminal Tab
Aluminum Can
Insulating Cup
Deck
Insulating Cup
Aluminum Can Laser Welded
Terminal Tabs
Deck
Screw Terminal (+)
Screw Terminal (−)
Polarity Mark (+)
Safety Vent Plug
Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
(Fourth Layer)
Cathode Aluminum Foil,
Etched (Second Layer)
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Paper Spacer Impregnated
with Electrolyte (Third Layer)
12© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
Extended cathode
Anode foil
Cathode foil
Tissues
Foil tabs
Aging
Etching
Forming
Winding
Decking
Impregnation
Assembly
Testing
Sleeving
Packing
Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are
attached to each foil to provide the electrical contact.
The deck, complete with terminals, is attached to the tabs and then
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte.
Each capacitor is aged and tested before being sleeved and packed.
The purpose of aging is to repair any damage in the oxide layer
and thus reduce the leakage current to a very low level. Aging is
normally carried out at the rated temperature of the capacitor and
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours to
complete.
Damage to the oxide layer can occur due to variety of reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
A sample from each batch is taken by the quality department after
completion of the production process. This sample size is controlled
by the use of recognized sampling tables de ned in BS 6001.
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action.
Electrical:
• Leakage current
• Capacitance
• ESR
• Impedance
• Tan Delta
Mechanical/Visual:
• Overall dimensions
• Torque test of mounting stud
• Print detail
• Box labels
• Packaging, including packed
quantity
13© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 6/5/2018
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C
KEMET Electronics Corporation Sales Offi ces
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.