VDE MINIATURE PC BOARD TYPE POWER RELAY JS JS RELAYS FEATURES TYPICAL APPLICATIONS * Miniature size with universal terminal footprint * High contact capacity: 10 A * TV-5 type available (Standard type) 1 Form A type TV-5 1 Form C type TV-5 (N.O. side only) * VDE, TUV also approved * Sealed construction for automatic cleaning (Standard type) * Class B and F coil insulation type also available. * EN60335-1 GWT compliant (Tested by VDE) type available * Surge voltage 6 kV type also available 1. Home appliances Air conditioner, heater, etc. 2. Office machines PPC, facsimile, etc. 3. Vending machines ORDERING INFORMATION JS F Contact arrangement 1: 1 Form C (Standard) 1a: 1 Form A (Standard) 1aP: 1 Form A (Long endurance type) Protective construction Nil: Sealed type F: Flux-resistant type Coil insulation class Nil: Class E insulation B: Class B insulation F: Class F insulation Nominal coil voltage (DC) 5V, 6V, 9V, 12V, 18V, 24V, 48V Contact material F: AgSnO2 type Flame resistance and tracking resistance Nil: - TT: EN60335-1 (Conform) Surge voltage 6K: 6kV type Standard: UL, CSA, VDE, TUV (Standard type) UL, CSA, VDE (Long endurance type and EN60335-1 GWT compliant type) UL, CSA (Surge voltage 6kV type) Notes: 1. When ordering TV rated (TV-5) types, add suffix -TV. 2. Contact arrangement 1aP type is Flux-resistant type only (Class B insulation only). ds_61B05_en_js: 010611D 1 JS TYPES Contact arrangement 1 Form A (Standard) 1 Form A Long endurance type 1 Form C (Standard) Sealed type Nominal coil voltage Flux-resistant type Part No. Part No. 5V DC JS1a-5V-F JS1aF-5V-F 6V DC JS1a-6V-F JS1aF-6V-F 9V DC JS1a-9V-F JS1aF-9V-F 12V DC JS1a-12V-F JS1aF-12V-F 18V DC JS1a-18V-F JS1aF-18V-F 24V DC JS1a-24V-F JS1aF-24V-F 48V DC JS1a-48V-F JS1aF-48V-F 5V DC - JS1aPF-B-5V-F 6V DC - JS1aPF-B-6V-F 9V DC - JS1aPF-B-9V-F 12V DC - JS1aPF-B-12V-F 18V DC - JS1aPF-B-18V-F 24V DC - JS1aPF-B-24V-F 48V DC - JS1aPF-B-48V-F 5V DC JS1-5V-F JS1F-5V-F 6V DC JS1-6V-F JS1F-6V-F 9V DC JS1-9V-F JS1F-9V-F 12V DC JS1-12V-F JS1F-12V-F 18V DC JS1-18V-F JS1F-18V-F 24V DC JS1-24V-F JS1F-24V-F 48V DC JS1-48V-F JS1F-48V-F Standard packing Carton: 100 pcs. Case: 500 pcs. Notes: 1. Class B and F coil insulation types available. Ex) JS1aF-B-12V-F, JS1aF-F-12V-F 2. EN60335-1 GWT compliant types available. When ordering, please add suffix "TT". Ex) JS1aF-B-12V-FTT Contact arrangement 1 Form A (Standard) 1 Form A Long endurance type 1 Form C (Standard) Nominal coil voltage Sealed type Part No. Flux-resistant type Part No. 5V DC JS1a-5V-FTT JS1aF-5V-FTT 6V DC JS1a-6V-FTT JS1aF-6V-FTT 9V DC JS1a-9V-FTT JS1aF-9V-FTT 12V DC JS1a-12V-FTT JS1aF-12V-FTT 18V DC JS1a-18V-FTT JS1aF-18V-FTT 24V DC JS1a-24V-FTT JS1aF-24V-FTT 48V DC JS1a-48V-FTT 5V DC - JS1aPF-B-5V-FTT 6V DC - JS1aPF-B-6V-FTT 9V DC - JS1aPF-B-9V-FTT 12V DC - JS1aPF-B-12V-FTT 18V DC - JS1aPF-B-18V-FTT 24V DC - JS1aPF-B-24V-FTT 48V DC - JS1aPF-B-48V-FTT JS1aF-48V-FTT 5V DC JS1-5V-FTT JS1F-5V-FTT 6V DC JS1-6V-FTT JS1F-6V-FTT 9V DC JS1-9V-FTT JS1F-9V-FTT 12V DC JS1-12V-FTT JS1F-12V-FTT 18V DC JS1-18V-FTT JS1F-18V-FTT 24V DC JS1-24V-FTT JS1F-24V-FTT 48V DC JS1-48V-FTT JS1F-48V-FTT 3. Surge voltage 6kV types available. When ordering, please add suffix "6K" (except for Long endurance type and EN60335-1 GWT compliant type). Ex) JS1aF-B-12V-F-6K 2 ds_61B05_en_js: 010611D JS RATING 1. Coil data Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 5V DC 72 mA 69.4 6V DC 60 mA 100 40 mA 225 30 mA 400 20 mA 900 24V DC 15 mA 1,600 48V DC 7.5mA 6,400 9V DC 12V DC 18V DC 10%V or more of nominal voltage (Initial) 70%V or less of nominal voltage (Initial) Nominal operating power (at 20C 68F) Max. applied voltage (at 70C 158F) 130%V of nominal voltage 360mW [When using relays at 85C 185F, see Note*] Note: * When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C 68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range. 2. Specifications Characteristics Item Specifications Contact material Contact AgSnO2 type Contact resistance (Initial) Arrangement Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating 1 Form A, 1 Form C 1 Form A Long endurance type 10 A 250 V AC (NO), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC 10 A 250 V AC, 10 A 277 V AC, 5 A 30 V DC 2,500VA 150W (NO), 1,662VA 150W (NC) 2,770VA 150W Max. switching voltage 250V AC, 100V DC (0.5A) Max. switching current 10A (AC), 5A (DC) Nominal operating power 360mW Min. switching capacity*1 100mA, 5V DC Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Max. 100 m (By voltage drop 6 V DC 1A) Between open contacts Between contact and coil Temperature rise (coil) Min. 100M (at 500V DC) Measurement at same location as "Breakdown voltage" section. 750 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) Max. 35C 95F (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 10A, at 70C 158F) Operate time (at nominal voltage) (at 20C 68F) Max. 10 ms (excluding contact bounce time.) Release time (at nominal voltage) (at 20C 68F) Max. 10 ms (excluding contact bounce time) (Without diode) Shock resistance Mechanical characteristics Vibration resistance Functional 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Destructive 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) Functional 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.) Destructive 10 to 55 Hz at double amplitude of 2 mm Mechanical (at 180 times/min.) Expected life Conditions Min. 107 Electrical (resistive load) 1105 [10A 125V AC, 6A 277V AC, 5A 30V DC] 5104 (NO contact only) [10A 250V AC] 2105 [10A 277V AC] 1.5105 [10A 250V AC (at 20 times/min., 105C 221F)] 1105 [5A 30V DC] Conditions for operation, transport and storage*2 -40C to +70C -40F to +158F (Class E insulation) -40C to +85C -40F to +185F (Class B insulation)*3 -40C to +105C -40F to +221F (Class F insulation)*3 Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) -40C to +105C -40F to +221F*3; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Max. operating speed Unit weight 20 times/min. (at nominal switching capacity) Approx. 12 g .423 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to "6. Usage, Storage and Transport Conditions" in AMBIENT ENVIRONMENT section in Relay Technical Information. *3. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C 68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range. ds_61B05_en_js: 010611D 3 JS REFERENCE DATA 1. Maximum value for switching capacity 2.-(1) Coil temperature rise 2.-(2) Coil temperature rise Sample: 5 pcs., JS1a-24V-F Measured portion: Inside the coil Contact current: 5 A Sample: 5 pcs., JS1a-24V-F Measured portion: Inside the coil Contact current: 10 A 100 60 60 AC resistive load 10 1 DC resistive load 10 26C 70C 85C 40 30 50 30 20 10 10 100 Contact voltage, V 120 140 0 160 Coil applied voltage, %V 70C 85C 40 20 0 100 30 Temperature rise, C Temperature rise, C Contact current, A 26C 50 100 120 140 160 Coil applied voltage, %V 3. Life curve 4. Operate/release time 5. Ambient temperature characteristics Ambient temperature: Room temperature Sample: 25 pcs., JS1-12V-F Sample: 6 pcs., JS1-12V-F Life, x104 125V AC resistive load 10 Changing ration, % Operate/release time, ms 100 10 Operate time 8 10 6 20 40 60 80 4 0 1 2 3 4 5 6 7 8 9 80 10 100 120 -20 140 Coil applied voltage, %V Contact current, A DIMENSIONS (mm inch) CAD Data Ambient temperature C -10 Max. - x Min. Max. - x Min. Release time 0 Drop-out voltage -60 -40 -20 0 2 1 Pick-up voltage 20 CAD Data Data from our Web site. Download CAD External dimensions Schematic (Bottom view) 1 Form A 16 .630 0.4 .016 N.O. COIL PC board pattern (Bottom view) 1 Form A (Standard, High Power) 4-1.3 dia. 4-.051 dia. COM 3.9 .154 0.24 .009 12 .472 0.8 .031 0.8 .031 1 Form C N.O. 0.4 .016 2 16 .630 1.2 .047 2.3 .091 COIL 3 N.O. 12 .472 1 12.2 .480 1 Form C N.C. (Standard) 4 N.C. 5 5-1.3 dia. 5-.051 dia. 0.4 .016 2 .079 12.2 .480 22 .866 12 .472 Note: Terminal No. 4 is only for Standard 1 Form C type Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 4 2 .079 COM General tolerance 0.1 .004 0.2 .008 0.3 .012 2 .079 12.2 .480 Tolerance: 0.1 .004 ds_61B05_en_js: 010611D JS SAFETY STANDARDS UL/C-UL (Recognized) File No. Contact rating CSA (Certified) File No. Contact rating VDE (Certified) File No. Contact rating E43028 10A 125V AC, 6A 277V AC LR26550 10A 125V AC 40011475 10A 125V AC (cos =1.0) 5A 30V DC, 1/8HP 125V AC 12A 125V AC 5A 30V DC (0ms) 1/8HP 277V AC 6A 277V AC 6A 250V AC (cos =1.0) 12A 125V AC (N.O., N.C.) 12A 277V AC 12A 277V AC (N.O., N.C.) 5A 30V DC 1/8HP 125V AC 10A 125V AC (N.O., N.C.) 1/8HP 277V AC 85C 5A 125V AC (N.O., N.C.) 105C, Class B insulation 4FLA/4LRA125V AC 105C 2FLA/4LRA125V AC 105C 1/3HP 125V AC 75C N.O. 1/3HP 277V AC 75C N.O. 6FLA/6LRA125V AC 85C (N.O.) TV rating (UL/CSA) File No. Rating TUV (Certified) File No. Rating UL 1aTV-5 B 10 02 10A 125V AC (cos=1.0) E43028 1cTV-5 (N.O.) 13461 271 6A 250V AC (cos =1.0) CSA 5A 30V DC (0ms) LR26550 For Cautions for Use, see Relay Technical Information. ds_61B05_en_js: 010611D 5