KBPC40, 50G/W SERIES W TE PO WE R SEM IC O ND UC TO R S 40, 50A GLASS PASSIVATED BRIDGE RECTIFIER Features ! Glass Passivated Die Construction A ! ! ! Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Epoxy Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V C ! A C G G ~ D + ~ - C ! ! ! ! - ~ D H Mechanical Data ! + C H ! ~ E Case: Epoxy Case with Heat Sink Internally Mounted in the Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Case Mounting: Through Hole for #10 Screw Weight: KBPC-G 24 grams (approx.) KBPC-GW 21 grams (approx.) Marking: Type Number E B B Metal Heat Sink KBPC-G KBPC-G KBPC-GW Min Max Min Max 28.40 28.70 28.40 28.70 10.97 11.23 10.97 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 22.86 25.40 30.50 -- Hole for #10 screw, 5.08O Nominal 6.35 Typical 0.97O 1.07O All Dimension in mm Dim A B C D E G H "W" Suffix Designates Wire Leads No Suffix Designates Faston Terminals *All Models are Available on B(Height)=7.9mm Max. Epoxy Case Maximum Ratings and Electrical Characteristics KBPC-GW @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage -00G/W -01G/W -02G/W -04G/W -06G/W -08G/W -10G/W Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectifier Output Current @TC = 55C KBPC40 KBPC50 IO 40 50 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave Superimposed on rated load (JEDEC Method) KBPC40 KBPC50 IFSM 400 400 A KBPC40 @IF = 20A KBPC50 @IF = 25A VFM 1.1 V IRM 5.0 500 A Forward Voltage Drop (per element) Peark Reverse Current At Rated DC Blocking Voltage KBPC40, 50G/W SERIES @TC = 25C @TC = 125C 1 of 4 (c) 2002 Won-Top Electronics Maximum Ratings and Electrical Characteristics Typical Junction Capacitance (per element) (Note 1) Typical Thermal Resistance Junction to Case (per element) (Note 2) KBPC40 KBPC50 RMS Isolation Voltage from Case to Lead Operating and Storage Temperature Range @TA=25C unless otherwise specified Cj 300 pF RJC 1.5 K/W VISO 2500 V Tj, TSTG -65 to +150 C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to case mounted on heatsink. KBPC40, 50G/W SERIES 2 of 4 (c) 2002 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 60 Mounted on a 220 x 220 x 50 mm AL plate heatsink KBPC50 45 KBPC40 30 15 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 KBPC40 1.0 KBPC50 0.1 Tj = 25C Pulse Width = 300s 0.01 150 0 0.8 1.0 1.2 1.4 1.6 1.8 1000 Single Half-Sine Wave (JEDEC Method) f = 1 Mhz Tj = 25C 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (C) Fig. 1 Forward. Current Derating Curve 400 0.2 200 100 100 Tj = 150C 0 1 10 100 10 0.1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 1.0 100 Tj = 125C 10 1.0 0.1 Tj = 25C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) KBPC40, 50G/W SERIES 3 of 4 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity KBPCxx00G Square Bridge 50 Units/Box KBPCxx00GW Square Bridge 50 Units/Box KBPCxx01G Square Bridge 50 Units/Box KBPCxx01GW Square Bridge 50 Units/Box KBPCxx02G Square Bridge 50 Units/Box KBPCxx02GW Square Bridge 50 Units/Box KBPCxx04G Square Bridge 50 Units/Box KBPCxx04GW Square Bridge 50 Units/Box KBPCxx06G Square Bridge 50 Units/Box KBPCxx06GW Square Bridge 50 Units/Box KBPCxx08G Square Bridge 50 Units/Box KBPCxx08GW Square Bridge 50 Units/Box KBPCxx10G Square Bridge 50 Units/Box KBPCxx10GW Square Bridge 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com KBPC40, 50G/W SERIES We power your everyday. 4 of 4 (c) 2002 Won-Top Electronics