MBR6045PT - Diodes Incorporated - Datasheet.Directory

OBSOLETE – PART DISCONTINUED

MBR6030PT - MBR6045PT

DS30053 Rev. 5 - 4

1 of 3

www.diodes.com

July 2015

ã Diodes Incorporated

MBR6030PT - MBR6045PT

60A SCHOTTKY BARRIER RECTIFIER

Features

Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified

·Schottky Barrier Chip

·Guard Ring Die Construction for Transient Protection

·Low Power Loss, High Efficiency

·High Surge Capability

·High Current Capability and Low Forward Voltage Drop

·For Use in Low Voltage, High Frequency Inverters, Free

Wheeling, and Polarity Protection Application

·Lead Free Finish, RoHS Compliant (Note 3)

Mechanical Data

·Case: TO-3P

·Case Material: Molded Plastic. UL Flammability

Classification Rating 94V-0

·Moisture Sensitivity: Level 1 per J-STD-020C

·Terminals: Finish - Bright Tin. Plated Leads Solderable per

MIL-STD-202, Method 208

·Polarity: As Marked on Body

·Ordering Information: See Last Page

·Marking: Type Number

·Weight: 5.6 grams (approximate)

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic Symbol MBR

6030PT

MBR

6035PT

MBR

6040PT

MBR

6045PT Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

30 35 40 45 V

RMS Reverse Voltage VR(RMS) 21 25 28 32 V

Average Rectified Output Current @ TC= 125°C

(Note 1) IO60 A

Non-Repetitive Peak Forward Surge Current 8.3ms

single half sine-wave superimposed on rated load

(JEDEC Method)

IFSM 500 A

Forward Voltage Drop @ IF= 30A, TC= 25°C

@ IF= 30A, TC= 125°C

@ IF= 60A, TC= 25°C

VFM

0.62

0.55

0.75

Peak Reverse Current @ TC= 25°C

at Rated DC Blocking Voltage @ TC= 100°CIRM 1.0

50 mA

Typical Total Capacitance (Note 2) CT650 pF

Typical Thermal Resistance Junction to Case (Note 1) RqJC 1.0 °C/W

Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C

Notes: 1. Thermal resistance junction to case mounted on heatsink.

2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see

EU Directive Annex Notes 5 and 7.

TO-3P

Dim Min Max

A1.88 2.08

B4.68 5.36

C20.63 22.38

D18.5 21.5

E2.1 2.4

G0.51 0.76

H15.38 16.25

J1.90 2.70

K2.9Æ3.65Æ

L3.78 4.50

M5.2 5.7

N0.89 1.53

P1.82 2.46

Q2.92 3.23

R11.70 12.84

S¾6.10

All Dimensions in mm

PART OBSOLETE

OBSOLETE

OBSOLETE – PART DISCONTINUED

2 of 3

www.diodes.com

0.1

1.0

100

0.20 0.4 0.6 0.8 1.0

I , INSTANTANE

US FWD CURRENT (A)

V , INSTANTANEOUS FORWARD VOLTAGE (V)

Fig. 2 Typical Forward Characteristics

100

200

300

400

500

600

1 10 100

I , PEAK F

RWARD SURGE CURRENT (A)

FSM

NUMBER OF CYCLES AT 60Hz

Fig. 3 Max Non-Repetitive Surge Current

8.3ms single half-sine-wave

JEDEC method

100

1000

10000

0.1 1.0 10 100

APA

ITANCE (pF)

V , REVERSE VOLTAGE (V)

Fig. 4 Typical Total Capacitance per Element

T=25C

0.01

0.1

1.0

100

0204060

I , INSTANTANE

US REVERSE CURRENT (mA)

PEAK REVERSE VOLTAGE (V)

Fig. 5 Typical Reverse Characteristics

T = 100 C

T=25C

30 5010

0 50 100 150

I , AVERAGE FORWARD CURRENT (A)

T , CASE TEMPERATURE ( C)

. 1 Forward Current Deratin

Curve

PART OBSOLETE

July 2015

ã Diodes Incorporated

MBR6030PT - MBR6045PT

DS30053 Rev. 5 - 4

OBSOLETE

OBSOLETE – PART DISCONTINUED

Notes: 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf

3 of 3

www.diodes.com

Ordering Information

Device Packaging Shipping

MBR6030PT TO-3P 30/Tube

MBR6035PT TO-3P 30/Tube

MBR6040PT TO-3P 30/Tube

MBR6045PT TO-3P 30/Tube

(Note 4)

IMPORTANT NOTICE

LIFE SUPPORT

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further

notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither

does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will

agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the

President of Diodes Incorporated.

PART OBSOLETE

July 2015

ã Diodes Incorporated

MBR6030PT - MBR6045PT

DS30053 Rev. 5 - 4

OBSOLETE