DB10 Series Bridge Rectifiers
Page <1> 19/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Features:
Rating to 1,000 V PRV
Ideal for printed circuit board
Low forward voltage drop, high current capability
Reliable low cost construction utilizing moulded plastic technique results in
inexpensive product
The plastic material has UL flammability classification 94V-0
Reverse Voltage - 50 to 1,000 V
Forward Current - 1 Ampere
Mechanical Data
Weight : 0.02 oz, 0.38 g
Mounting position : Any
Dimensions : Inches (Millimetres)
DB10 Series Bridge Rectifiers
Page <2> 19/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Characteristics Symbol DB101S DB102S DB103S DB104S DB105S DB106S DB107S Unit
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1,000
VMaximum RMS Voltage VRMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1,000
Maximum Average Forward
Rectified Current at TA= 40°C I(AV) 1
A
Peak Forward Surge Current
8.3 ms Single Half Sine-wave IFSM 30
Maximum Forward Voltage at 1 A dc VF1.1 V
Maximum DC Reverse Current at TJ = 25°C
at Rated DC Blocking Voltage at TJ= 125°C IR
10
500 µA
I2t Rating for Fusing (t < 8.3 ms) I2t10.4 A2s
Typical Junction Capacitance Per Element (Note 1) CJ25 pF
Typical Thermal Resistance (Note 2) RθJA 40 °C/W
Operating Temperature Range TJ-55 to +150
°C
Storage Temperature Range TSTG -55 to +150
Note: 1. Measured at 1 MHz and applied reverse voltage of 4 V dc
2. Thermal resistance from junction to ambient mounted on PCB with 0.5 × 0.5 inches (13 × 13 mm) copper pads
Ratings and Characteristics Curves
Average Forward Current Amperes
Forward Current Derating Curve
Ambient Temperature, °C
Maximum Non - Repetitive Surge Current
Peak Forward Surge Current,
Amperes
Number of Cycles at 60 Hz
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load
For capacitive load, derate current by 20%
DB10 Series Bridge Rectifiers
Page <3> 19/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Typical Junction Capacitance
Reverse Voltage, (Volts)
Capacitance (pF)
Typical Forward Characteristics
Instantaneous Forward Voltage, Volts
Instantaneous Forward Current, (A)
Ratings and Characteristics Curves
Typical Reverse Characteristics
Instantaneous Reverse Current, (µA)
Percent of Rated Peak Reverse Voltage, (%)
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.