3 x 5 x 1 Inches Form Factor 350 Watts with Forced Air Cooling & 200 Watts with Convection Cooling Efficiencies up to 94% -40 to 70 degree operating temperature 12 V Fan Output, Thermal Shut-Down feature 800 k Hours MTBF Diagnostic Standby Power < 0.5 W Drug Pump Approved to EN60601-1 3rd Edition Dialysis RoHS Compliant CE mark Home Health Care Monitoring Portable Equipment North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 Bel Power Solutions 152 North 3rd Street, Suite 805 San Jose, CA 95112 USA tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 MBC350 Series 866.513.2839 tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 MBC350 Series Specifications are for nominal input voltage, 25C unless otherwise stated. PARAMETER Input Voltage DESCRIPTION / CONDITION Universal (Derate from 100% at 100 VAC to 90% at 90 VAC) Input Frequency Input Current No Load Power Inrush Current Leakage Current Power Factor PARAMETER Output Power Efficiency Hold-up Time DESCRIPTION / CONDITION With 375 LFM: Convection: 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: Full Load: Convection Load: CRITERION 350 W 200 W 94% 93% 92% 8 ms typical 14 ms typical +/-0.5% Load Regulation Rise Time 85-264 VAC / 390 VDC 47 - 63 Hz 3.6 A max. 1.8 A max. >0.5 W 25 A 45 A 75 A 300 uA <100 uA >0.95 115 VAC: 230 VAC: Typical 115 VAC: 230 VAC: 264 VAC: Typical Touch Current with Full Load Line Regulation Transient Response CRITERION +/-1% 50-100% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50Hz = 5% , Typical Set Point Tolerance recovery time < 5 ms 55 ms +/-1% Over Current Protection Hiccup mode / Auto Recovery >110% Over Voltage Protection Hiccup mode / Auto Recovery 110 to 140% Short Circuit Protection Hiccup mode / Auto Recovery PARAMETER DESCRIPTION / CONDITION Input to Output: medical applications Input to GND: PFC: PWM: -40 to 0C startup guaranteed, with spec deviation Isolation Voltage Switching Frequency Operating Temperature Non-operating Temperature Reliability Cooling CRITERION 4000 VAC 1500 VAC 70 - 130 KHz 50 - 80 KHz -40 to +70C -40 to 85 C MTBF according to Bellcore TR-332, @ 25C With 375 LFM forced air cooling at 100 to 264 VAC: With natural convection cooling at 100 to 264 VAC: >800 kh 350 W 200 W 866.513.2839 tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 MBC350 Series PARAMETER DESCRIPTION / CONDITION Conducted Emissions EN55022-B, CISPR22-B, FCC PART15 - B Static Discharge EN61000-4-2: Level-3 RF Field Susceptibility EN61000-4-3: Level-3 Fast Transients/Bursts EN61000-4-4: Radiated: Radiated with external core: EN61000-4-5: Level-3 Level A TBD Level-3 EN61000-3-2: Operating: Non-operating: Non Condensing Class D 10,000 ft. 40,000 ft. 5% to 95% Radiated Emissions Surge Susceptibility Harmonic Current Altitude Humidity PARAMETER Agency Approvals DESCRIPTION / CONDITION EN60601-1 IEC 60601-1 (ed.3) ANSI / AAMI ES 60601 - 1 CSA C22.2 No. 60601-1 Nemko, UL, C-UL CE mark Complies with LVD Directive Safety Standard(s) CRITERION Figure 1 - Derating Curves 866.513.2839 tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 MBC350 Series CONNECTOR PIN AC Input Connector J1 DC Output Connector J2 Aux (Fan) Output J3 Earth J4 DESCRIPTION/CONDITION Pin 1 AC Neutral Pin 2 Not Fitted Pin 3 AC Line Screw Terminal (Option 1) Pin 1 V1 -VE Pin 2 V1 + VE Molex Connector (Option 2) Pin 1,2,3,4 V1 -VE Pin 5,6,7,8 V1 + VE Pin 1 FAN -VE Pin 2 FAN +VE PARAMETER DESCRIPTION/CONDITION Weight 300 g max Dimensions 76.2 x 127 x 25.4 mm (3 x 5 x 1 inch) MANUFACTURER / PN Molex: 26-60-4030 Mating: 09-50-3031; Pins: 08-50-0106 6-32 inches Screw Pan HD Mating: 16 AWG wire crimped to Ring Tongue Terminal AMP: 8-31886-1 Molex: 26-60-4080 Mating: 09-50-3081; Pins: 08-50-0106 AMP :640456-2 Mating: 640440-2 Molex: 19705-4301 Mating: 19003-0001 Figure 2 - Mechanical Drawing - Screw Terminal Option 866.513.2839 tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 MBC350 Series Figure 3 - Mechanical Drawing - Molex Connector Option NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 866.513.2839 tech.support@psbel.com (c) 2014 Bel Power Solutions, inc. BCD.00561_001 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bel Power Solutions: MBC350-1T24L MBC350-1T48L MBC350-1T12L