System Power and Expansion
Programmable Controller CS1 C--149
CPU Rack
CPU Backplane
Power
Supply
Unit
Memory Card
Serial Communications
Board
I/O Modules
Special I/O Modules
CS1 CPU Bus Modules
I/O Connecting Cable
Expansion Rack I/O Backplane
Power
Supply
Unit
I/O Modules
Special I/O Modules
CS1 CPU Bus Modules
Remote I/O Master Unit
CPU Rack
A CPU Rack consists of a CPU, Power Supply Unit, CPU
Backplane, Basic I/O Modules, Special I/O Modules, and
CPU Bus Modules. The Serial Communications Board and
Memory Cards are optional.
Note: The Backplane depends on the type of CPU Rack, Ex-
pansion I/O Racks, and Slave Racks that are used.
Expansion Racks
Both C200H and CS1 Expansion Racks can be used.
•C200H Expansion I/O Racks can be connected to CPU
Racks, CS1 Expansion Racks, orother C200HExpansion
I/O Racks.
•CS1 Expansion Racks can be connected to CPU Racks or
other CS1 Expansion Racks.
An Expansion Rack consists of a Power Supply Module, a
CS1 or C200H Expansion I/O Backplane , Basic I/O Mod-
ules, Special I/O Modules, and a CS1 CPU Bus Modules.
Long-distance Expansion Racks
An I/O Control Module and I/O Interface Modules can be
used to extend the normal limit of 12 m to 50 m for each of
two series of CS1 Expansion Racks. The following Mod-
ules can be mounted to Long-distance Expansion Racks:
CS1 Basic I/O Modules, CS1 Special I/O Modules, and
CS1 CPU Bus Modules. (C200H Modules cannot be
mounted to Long-distance Expansion Racks.)
System Power and Expansion
Programmable Controller CS1
C--150
CPU Rack
JConfiguration
Name Configuration Remarks
CPU Rack CPU Backplane One of each Module required for every CPU Rack.
CPU Module
q
y
Refer to the following table for model number.
Power Supply Module
g
Memory Card Install as required.
Serial Communications Board
q
Refer to the following table for model number.
JProducts Used in CPU Racks
Name Model Specifications
CPUs CS1H-CPU67H I/O bits: 5,120, Program capacity: 250K steps
Data Memory: 448K words (DM: 32K words, EM: 32K words x 13 banks)
CS1H-CPU66H I/O bits: 5,120, Program capacity: 120K steps
Data Memory: 256K words (DM: 32K words, EM: 32K words x 7 banks)
CS1H-CPU65H I/O bits: 5,120, Program capacity: 60K steps
Data Memory: 128K words (DM: 32K words, EM: 32K words x 3 banks)
CS1H-CPU64H I/O bits: 5,120, Program capacity: 30K steps
Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank)
CS1H-CPU63H I/O bits: 5,120, Program capacity: 20K steps
Data Memory: 32K words (DM: 32K words, EM: 32K words x 1 bank)
CS1G-CPU45H I/O bits: 5,120, Program capacity: 60K steps
Data Memory: 128K words (DM: 32K words, EM: 32K words x 3 banks)
CS1G-CPU44H I/O bits: 1,280, Program capacity: 30K steps
Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 banks)
CS1G-CPU43H I/O bits: 960, Program capacity: 20K steps
Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank)
CS1G-CPU42H I/O bits: 960, Program capacity: 10K steps
Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank)
CPU Backplanes CS1W-BC022 2 slots (Connection is not possible
to Expansion Backplane.)
These Backplanes are for CS1 Mod-
ules only. Use CS1W-BCjj3Back-
p
l
a
n
e
s
f
o
r
C
2
0
0
H
M
o
d
u
l
e
s
CS1W-BC032 3slots
p
l
a
n
e
s
f
o
r
C
2
0
0
H
M
o
d
u
l
e
s
.
CS1W-BC052 5slots
CS1W-BC082 8slots
CS1W-BC102 10 slots
Power Supply
M
d
l
C200HW-PA204 100 to 120 VAC or 200 to 240 VAC, Output capacity: 4.6 A, 5 VDC
p
p
y
Modules C200HW-PA204S 100 to 120 VAC or 200 to 240 VAC (0.8 A 24 VDC service power )
Output capacity: 4.6 A, 5 VDC
C200HW-PA204R 100 to 120 VAC or 200 to 240 VAC (with RUN output) Output capacity:
4.6 A, 5 VDC
C200HW-PD024 24 VDC, Output capacity: 4.6 A, 5 VDC
C200HW-PA209R 100 to 120 VAC or 200 to 240 VAC (with RUN output) Output capacity:
9A,5VDC
I/O Control Module CS1W-IC102 Connects to CS1 Expansion Racks (two Terminating Resistors in-
cluded). Must be used together with I/O Interface Modules to connect
Long-distance Expansion Racks (50 m max.). Not required to connect
CS1 Expansion Racks within 12 m.
Memory Cards HMC-EF172 Flash memory, 15 MB (See note.)
y
HMC-EF372 Flash memory, 30 MB (See note.)
HMC-EF672 Flash memory, 64 MB (See note.)
HMC-AP001 Memory Card adapter
(This table continues on the next page.)
Note: HMC-EF172/EF372/EF672flash memory cannot be used with CS1G-CPUjjH, CS1H-CPUjjH, CJ1G-CPUjjH, or
CJ1H-CPUjjH Modules predating lot number 020108 (i.e., manufactured before January 8, 2002) or with NS-7-series pro-
ducts predating lot number 0852 (i.e., manufactured before May 8, 2002) cannot be used together.
System Power and Expansion
Programmable Controller CS1 C--151
CPU Rack
Products Used in CPU Rack (continued)
Name Model Specifications
Serial Communications Boards CS1W-SCB21-V1 2 x RS-232C ports, protocol macro function
CS1W-SCB41-V1 1 x RS-232C port + 1 x RS-422/485 port, protocol macro function
Programming Consoles CQM1-PRO01-E An English Keyboard Sheet (CS1W-KS001-E) is required.
g
g
C200H-PRO27-E
g
y
(
)
q
Programming Console Connection
C
b
l
CS1W-CN114 Connects the CQM1-PRO01-E Programming Console. (Length: 0.05 m)
g
g
Cables CS1W-CN224 Connects the C200H-PRO27-E Programming Console. (Length: 2.0 m)
CS1W-CN624 Connects the C200H-PRO27-E Programming Console. (Length: 6.0 m)
CX-Programmer WS02-CXPC1-EV3 Windows-based Support Software for Windows 95/98/Me or Windows
N
T
/
2
0
0
0
/
X
P
g
WS02-CXPC1-EV3L03
(For 3 licenses)
p
p
/
/
NT/2000/XP
N
o
t
e
:
C
a
n
c
o
n
n
e
c
t
t
h
r
o
u
g
h
p
e
r
i
p
h
e
r
a
l
p
o
r
t
o
r
t
h
r
o
u
g
h
R
S
-
2
3
2
C
p
o
r
t
WS02-CXPC1-EV3L10
(For 10 licenses)
N
o
t
e
:
C
a
n
c
o
n
n
e
c
t
t
h
r
o
u
g
h
p
e
r
i
p
h
e
r
a
l
p
o
r
t
o
r
t
h
r
o
u
g
h
R
S
2
3
2
C
p
o
r
t
on CPU Module or Serial Communications Board.
Programming Device Connecting
C
b
l
(
f
i
h
l
)
CS1W-CN118 Connects DOS computer, D-Sub 9-pin receptacle (Length: 0.1 m)
g
g
g
Cables (for peripheral port) CS1W-CN226 Connects DOS computer, D-Sub 9-pin (Length: 2.0 m)
CS1W-CN626 Connects DOS computer, D-Sub 9-pin (Length: 6.0 m)
XW2Z-200S-CV
CBL--202*
Connects DOS computer, D-Sub 9-pin (Length: 2.0 m)
XW2Z-500S-CV Connects DOS computer, D-Sub 9-pin (Length: 5.0 m)
Programming Device Connecting
Cables (for RS-232C port)
XW2Z-200S-V
CBL-202*
Connects DOS computer, D-Sub 9-pin (Length: 2.0 m)
(For Host Link connection)
(
p
)
XW2Z-500S-V Connects DOS computer, D-Sub 9-pin (Length: 5.0 m)
(For Host Link connection)
CX-Simulator WS02-SIMC1-E Windows-based Support Software for Windows 95, 98, Me, NT, or 2000
Simulates operation for CS1 CS1H/CS1G-CPUjj CPU Modules without “V1” at the end of
the model number.
CX-Protocol WS02-PSTC1-E Windows-based Support Software for Windows 95, 98, Me, 2000 or NT
Used to create and manage protocol macros.
Battery Set CS1W-BAT01 For CS1 Series only.
Use a replacement battery that is no more than 2 years old from the date of manufacture.
* Available in Canada only.
System Power and Expansion
Programmable Controller CS1
C--152
CPU Rack
JExpansion Rack Configuration
Rack Configuration Remarks
CS1 Expansion Rack CS1 Expansion I/O Backplane One of each Module is required.
p
Power Supply Module
q
For connection to a CPU Backplane or CS1 Expansion I/O Back-
plane: CS1 I/O Connecting Cable
For connection to a C200H Expansion I/O Backplane: CS1 to
C200H I/O Connecting Cable
C200H Expansion I/O
R
k
C200H Expansion I/O Backplane One of each Module is required.
p
/
Rack Power Supply Module
q
A CS1 Expansion Rack cannot be
For connection to a CPU Backplane or CS1 Expansion I/O Back-
plane: CS1 to C200H I/O Connecting Cable
A
C
S
1
E
x
p
a
n
s
i
o
n
R
a
c
k
c
a
n
n
o
t
b
e
connected after a C200H Expansion
I/O Rack.
For connection to a C200H Expansion I/O Backplane: C200H I/O
Connecting Cable
JProducts Used in Expansion Racks
Name Model Specifications Cable Length
CS1ExpansionI/O
B
k
l
CS1W-BI032 3slots These Backplanes are for CS1
M
o
d
u
l
e
s
o
n
l
y
---
p
/
Backplanes CS1W-BI052 5slots
p
Modules only.
U
s
e
C
S
1
W
-
B
I
j
j
3
B
a
c
k
p
l
a
n
e
s
CS1W-BI082 8slots
U
s
e
C
S
1
W
-
B
I
j
j
3
B
a
c
k
p
l
a
n
e
s
for C200H Modules.
CS1W-BI102 10 slots
C200H Expansion I/O
B
k
l
C200HW-BI031 3slots
p
/
Backplanes C200HW-BI051 5slots
C200HW-BI081-V1 8slots
C200HW-BI101-V1 10 slots
Power Supply Modules C200HW-PA204 100to120VACor200to240VAC
Output capacity: 4.6 A, 5 VDC
C200HW-PA204S 100to120VACor200to240VAC
(with power output terminal: 0.8 A, 24 VDC)
Output capacity: 4.6 A, 5 VDC
C200HW-PA204R 100 to 120 VAC or 200 to 240 VAC (with RUN output)
Output capacity: 4.6 A, 5 VDC
C200HW-PD024 24 VDC
C200HW-PA209R 100 to 120 VAC or 200 to 240 VAC (with RUN output)
Output capacity: 9 A, 5 VDC
I/O Interface Module CS1W-II102 Connects CS1 Expansion Racks. Must be used together
with I/O Control Module to connect Long-distance Expan-
sion Racks (50 m max.). Not required to connect CS1
Expansion Racks within 12 m.
---
CS1 I/O Connecting Cables CS1W-CN313 Connects CS1 Expansion I/O Backplanes to CPU
Backplanes or other CS1 Expansion I/O Backplanes.
0.3 m
CS1W-CN713
p
p
p
When using a CS1W-CN313 or CS1W-CN713 I/O
C
o
n
n
e
c
t
i
n
g
C
a
b
l
e
w
i
t
h
a
C
S
1
j
-
C
P
U
j
j
H
C
P
U
M
o
d
u
l
e
0.7 m
CS1W-CN223
C
o
n
n
e
c
t
i
n
g
C
a
b
l
e
w
i
t
h
a
C
S
1
j
-
C
P
U
j
j
H
C
P
U
M
o
d
u
l
e
,
use only Cables produced on or after September 20, 2001
(production number 2091). Cables with no production
b
6
d
i
i
d
i
b
d
d
b
f
2m
CS1W-CN323
(
p
)
p
number, a 6-digit production number, or produced before
September 20, 2001, cannot be used. 3m
CS1W-CN523 Reading the production number
j
j
j
j
Y
e
a
r
(
e
g
1
9
9
7
=
7
)
5m
CS1W-CN133
j
j
j
j
Y
e
a
r
(
e
.
g
.
,
1
9
9
7
=
7
)
D
a
y
(
0
1
t
o
3
1
)
Month (1 to 9, X (10), Y (11), Z (12)) 10 m
CS1W-CN133-B2
D
a
y
(
0
1
t
o
3
1
)
12 m
System Power and Expansion
Programmable Controller CS1 C--153
CPU Rack
JProducts Used in CPU Racks
Name Model Specifications Cable Length
Long-distance Connecting
C
b
l
CV500-CN312 For Long-distance Expansion Racks 0.3 m
g
g
Cables CV500-CN612
g
p
C
o
n
n
e
c
t
s
t
h
e
I
/
O
C
o
n
t
r
o
l
M
o
d
u
l
e
t
o
I
/
O
I
n
t
e
r
f
a
c
e
M
o
d
u
l
e
s
0.6 m
CV500-CN122
C
o
n
n
e
c
t
s
t
h
e
I
/
O
C
o
n
t
r
o
l
M
o
d
u
l
e
t
o
I
/
O
I
n
t
e
r
f
a
c
e
M
o
d
u
l
e
s
or connects one I/O Interface Module to the next I/O Inter-
f
M
d
l
1m
CV500-CN222
f
a
c
e
M
o
d
u
l
e
.
2m
CV500-CN322 3m
CV500-CN522 5m
CV500-CN132 10 m
CV500-CN232 20 m
CV500-CN332 30 m
CV500-CN432 40 m
CV500-CN532 50 m
CS1-C200H I/O
C
i
C
b
l
CS1W-CN311 Connects C200H Expansion I/O Backplanes to CPU
B
k
l
C
S
1
E
i
I
/
O
B
k
l
0.3 m
/
Connecting Cables CS1W-CN711
p
/
p
Backplanes or CS1 Expansion I/O Backplanes. 0.7 m
CS1W-CN221 2m
CS1W-CN321 3m
CS1W-CN521 5m
CS1W-CN131 10 m
CS1W-CN131-B2 12 m
C200H I/O Connecting
C
b
l
C200H-CN311 Connects C200H Expansion I/O Backplanes to other
C
2
0
0
H
E
i
I
/
O
B
k
l
0.3 m
/
g
Cables C200H-CN711
p
/
p
C200H Expansion I/O Backplanes. 0.7 m
C200H-CN221 2m
C200H-CN521 5m
C200H-CN131 10 m
JExpansion Rack Patterns
The following diagrams show the 5 possible patterns of Expansion Racks.
C
P
U
R
a
c
k
w
i
t
h
C
S
1
E
x
p
a
n
s
i
o
n
R
a
c
k
s
CPU Rack
CS1 I/O
Connecting
Cable
CS1 I/O
Connecting
Cable
CS1 Expansion Rack
7 Racks
max.
CS1 I/O
Connecting
Cable
CS1 Expansion Rack
CS1 Expansion Rack
C
P
U
R
a
c
k
w
i
t
h
C
S
1
E
x
p
a
n
s
i
o
n
R
a
c
k
s
a
n
d
C
2
0
0
H
E
x
p
a
n
s
i
o
n
I
/
O
R
a
c
k
s
7 Racks
max. (Three
C200H
Expansion
I/O Racks
max.)
CS1 Expansion Rack
C200H Expansion
I/O Rack
CS1 to
C200H I/O
Connecting
Cable
CPU Rack
CS1 I/O
Connecting
Cable
C200H I/O
Connecting
Cable
C200H I/O
Connecting
Cable
C200H Expansion
I/O Rack
12 m 12 m
System Power and Expansion
Programmable Controller CS1
C--154
CPU Rack
CPU Rack with CS1 Long-Distance Expansion Racks
CPU Rack
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
Note: C200H Modules cannot be mounted to
Long-distance Expansion Racks.
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
50 m
50
m
I/O Control Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
Terminating Resistor
Terminating Resistor
Long-distance Connecting Cables
Long-distance Connecting Cable
Long-distance Connecting Cable
Long-distance Connecting Cable
Long-distance Connecting Cable
Long-distance Connecting Cable
Up to 7
Racks in
2series
CPU Rack with C200H Expansion I/O Racks
CPU Rack
CS1 to
C200H I/O
Connecting
Cable
C200H I/O
Connecting
Cable
C200H I/O
Connecting
Cable
C200H Expansion I/O
Rack
3 Racks max.
C200H Expansion
I/O Rack
C200H Expansion
I/O Rack
12 m
System Power and Expansion
Programmable Controller CS1 C--155
CPU Rack
CPU Rack with CS1 Expansion Rack and CS1 Long-Distance Expansion Racks
CPU Rack
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
Note:
CS1 Expansion Rack
CS1 Expansion Rack
CS1 Expansion Rack
0.7 m
50 m
50 m
Note: C200H Modules cannot be mounted to
Long-distance Expansion Racks. (They
can be mounted to the CS1 Expansion
Rack with the I/O Control Module
mounted.)
I/O Control Module
I/O Interface Module
Terminating Resistor
Long-distance Connecting Cables
Up to 6
Racks in
2series
Terminating Resistor
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
I/O Interface Module
Long-distance Connecting Cable
Long-distance Connecting Cable
Long-distance Connecting Cable
Long-distance Connecting Cable
CS1 I/O Connecting Cables
System Power and Expansion
Programmable Controller CS1
C--156
I/O Allocations
JI/O Allocations
In CS1 PLCs, part of the I/O memory is allocated to each Module. Modules are divided into the following 3 groups for al-
locations.
•Basic I/O Modules
•Special I/O Modules
•CS1 CPU Bus Modules
Basic I/O Modules
CS1 Basic I/O Modules C200H Basic I/O Modules
C200H Group-2 High-density I/O Modules
(See Note 2.)
Allocations
CIO Area:
CIO 0000 to CIO 0319 (See Note 1.)
(Memory is allocated in word Modules in order of mounting position in the Racks.)
Note 1. The Rack’s first word setting can be changed from the default setting
(CIO 0000) to any word from CIO 0000 to CIO 9999. The first word setting can
be changed only with a Programming Device other than a Programming
Console.
2. The Module number setting on the front of C200H Group-2 High-density I/O
Modules is ignored. Words are allocated to these Modules based on their
location in the Rack.
Special I/O Modules
CS1 Special I/O Modules C200H Special I/O Modules
(See Note 2.)
Allocations
Special I/O Module Area:
CIO 2000 to CIO 2959
(Each Module is allocated ten words based on its Module number.)
Note 1. Although there are 80 Module number settings, a maximum of 80 Modules can
actually be mounted to a PLC because that is the maximum number of slots
possible.
2. Some Modules classified as I/O Modules (namely C200H High-density I/O
Modules) are actually treated as Special I/O Modules.
CS1 CPU Bus Modules
CS1 CPU Bus Modules
Allocations
CS1 CPU Bus Module Area:
CIO 1500 to CIO 1899
(Each Module is allocated 25 words based on its Module number.)
System Power and Expansion
Programmable Controller CS1 C--157
I/O Allocations
JAllocations to Basic I/O Module
Groups
Basic I/O Modules include CS1 Basic I/O Modules, C200H
Basic I/O Modules, and C200H Group-2 High-density I/O
Modules.
Allocated words in the CIO Area:CIO 0000 to CIO 0319
Basic I/O Modules can be mounted to the CPU Rack, CS1
Expansion Racks, and C200HX/HG/HE Expansion I/O
Racks.
Note: CS1 Basic I/O Modules cannot be mounted to C200HX/
HG/HE Expansion I/O Racks.
Allocation Methods
1. CPU Rack
Basic I/O Modules on the CPU Rack are allocated words
left to right; Modules are allocated as many words as re-
quired in word Modules.
Slot numbers 2, 3, 5, 8, and 10
CPU Rack
CIO
0000
CPU Unit
CPU Rack
IN
8
CIO
0000
IN
16
CIO
0001
IN
64
CIO
0002
to
0005
OUT
8
CIO
0006
OUT
32
CIO
0007
to
0008
CPU Unit
Example
Power Supply
Module
Power Supply
Module
2. Allocations to CS1 Expansion and C200H Expansion
I/O Racks
I/O allocations to Basic I/O Modules continues from the
CPU Rack to the Expansion Racks. Words are allocated
from left to right and each Module is allocated as many
words as it requires in word Modules, just like Modules in
the CPU Rack.
CPU Rack
CS1 Expansion Rack
CS1 Expansion
Rack
Words allo-
cated in order
from Rack
nearest CPU
Rack.
CIO
0000
Power Supply
Power Supply
Power Supply
CPU
System Power and Expansion
Programmable Controller CS1
C--158
I/O Allocations
3. CS1 Long-distance Expansion Racks
Words are allocated to series A and then series B. Other-
wise, allocations are the same as for other Racks.
CPU Rack
CS1
Expansion
Rack
CPU Unit
Power Supply Unit
Power Supply Unit
CS1 Expansion
Rack
Power Supply Unit
CS1 Expansion
Rack
Power Supply Unit
CS1 Expansion
Rack
Power Supply Unit
Terminating
resistance
Terminating
resistance
I/O Control
Module
I/O Interface
Module
I/O Interface
Module
I/O Interface
Module
I/O Interface
Module
Series
A
Series B
System Power and Expansion
Programmable Controller CS1 C--159
I/O Allocations
JAllocations to Special I/O Modules
Special I/O Modules include CS1 Special I/O Modules and
C200H Special I/O Modules.
Each of these Modules is allocated ten words in the Spe-
cial I/O Module Area (CIO 2000 to CIO 2959).
Special I/O Modules can be mounted to the CPU Rack,
CS1 Expansion Racks, and C200H Expansion I/O Racks*.
Note: *CS1 Special I/O Modules cannot be mounted to C200H
Expansion I/O Racks.
Each Module is allocated 10 words in the Special I/O Mod-
ule Area, as shown in the following table.
Module number Words allocated
0CIO2000toCIO2009
1CIO2010toCIO2019
2CIO2020toCIO2029
15 CIO2150toCIO2159
95 CIO2950toCIO2959
Note: Special I/O Modules are ignored during I/O allocation to
Basic I/O Modules. Slots containing Special I/O Modules
are treated as empty slots.
JAllocations to CS1 CPU Bus Modules
Each CS1 CPU Bus Module is allocated 25 words in the
CS1 CPU Bus Module Area (CIO 1500 to CIO 1899).
CS1 CPU Bus Modules can be mounted to the CPU Rack
or CS1 Expansion Racks.
Each Module is allocated 25 words in the CPU Bus Mod-
ule Area, as shown in the following table.
Module number Words allocated
0CIO1500toCIO1524
1CIO1525toCIO1549
2CIO1550toCIO1574
15 CIO1875toCIO1899
Note: CS1 CPU Bus Modules are ignored during I/O allocation
to Basic I/O Modules. Slots containing CS1 CPU Bus
Modules are treated as empty slots.
System Power and Expansion
Programmable Controller CS1
C--160
Current Consumption
The amount of current/power that can be supplied to the Modules mounted in a Rack is limited by the capacity of the
Rack’s Power Supply Module. The system must be designed so that the total current consumption of the Modules does
not exceed the maximum current for each voltage group and the total power consumption does not exceed the maximum
for the Power Supply Module.
JCPU Racks and Expansion Racks
The following table shows the maximum currents and power that can be supplied by Power Supply Modules on CPU
Racks and Expansion Racks (both CS1 Expansion Racks and C200H Expansion I/O Racks).
Note: 1. When calculating current/power consumption in a CPU Rack, be sure to include the power required by the CPU Backplane
and CPU Module themselves.
2. Likewise, be sure to include the power required by the Expansion Backplane itself when calculating current/power
consumption in an Expansion Rack.
Power Supply Module Max. Current Consumption Max. Total Power
C
i
p
p
y
5-V group 26-V group 24-V group Consumption
C200HW-PA204 4.6 A 0.6 A None 30 W
C200HW-PA204S 4.6 A 0.6 A 0.8 A 30 W
C200HW-PA204R 4.6 A 0.6 A None 30 W
C200HW-PD204 4.6 A 0.6 A None 30 W
C200HW-PA209R 9A 1.3 A None 45 W
Be sure both Condition 1 and Condition 2 are met.
Condition 1: Maximum Current Supply
1. Current required at 5 VDC by all Modules (A) ≤Max. Current shown in table
2. Current required at 26 VDC by all Modules (B) ≤Max. Current shown in table
3. Current required at 24 VDC by all Modules (C) ≤Max. Current shown in table
Condition 2: Maximum Total Current Supply
1. A ×5VDC+B×26 VDC + C ×24 VDC ≤Max. Power shown in table
JExample Calculations
Example 1
In this example, the following Modules are mounted to a CPU Rack with a C200HW-PA204S Power Supply Module.
Module Model Quantity 5-VDC 26-VDC 24-VDC
CPU Backplane
(8 slots)
CS1W-BC083 10.11 A --- ---
CPU Module CS1H-CPU67-EV1 11.10 A --- ---
Input Modules C200H-ID216 20.10 A --- ---
p
CS1W-ID291 20.20 A --- ---
Output Modules C200H-OC221 20.01 A 0.075 A ---
Special I/O Module C200H-NC213 10.30 A --- ---
CPU Bus Module CS1W-CLK21 10.50 A --- ---
Service Power Supply Module (24 VDC) 0.3 A used --- --- 0.3 A
Total current/power consumption
13.15+3.9+7.2 = 24.25 (≤30 W)
2.63 A (≤4.6) x 5 V =
13.15W
0.15 A 〈≤0.6A) x 26 V =
3.9 W
0.3 A 〈≤0.8A) x 24 V =
7.2 W
System Power and Expansion
Programmable Controller CS1 C--161
Current Consumption
JCurrent Consumption Tables
5-VDC Voltage Group
Name Model Consumption (A)
CPU Modules CS1H-CPU67H 0.82 (See note.)
C
P
U
M
o
d
u
l
e
s
(These values include current consumption by a Programming CS1H-CPU66H 0.82 (See note.)
(
T
h
e
s
e
v
a
l
u
e
s
i
n
c
l
u
d
e
c
u
r
r
e
n
t
c
o
n
s
u
m
p
t
i
o
n
b
y
a
P
r
o
g
r
a
m
m
i
n
g
Console.) CS1H-CPU65H 0.82 (See note.)
CS1H-CPU64H 0.82 (See note.)
CS1H-CPU63H 0.82 (See note.)
CS1G-CPU45H 0.78 (See note.)
CS1G-CPU44H 0.78 (See note.)
CS1G-CPU43H 0.78 (See note.)
CS1G-CPU42H 0.78 (See note.)
Serial Communication Boards CS1W-SCB21-V1 0.28 (See note.)
S
e
r
i
a
l
C
o
m
m
u
n
i
c
a
t
i
o
n
B
o
a
r
d
s
CS1W-SCB41-V1 0.36 (See note.)
CPU Backplanes (for CS1 Modules only) CS1W-BC022 0.11
C
P
U
B
a
c
k
p
l
a
n
e
s
(
f
o
r
C
S
1
M
o
d
u
l
e
s
o
n
l
y
)
CS1W-BC032 0.11
CS1W-BC052 0.11
CS1W-BC082 0.11
CS1W-BC102 0.11
CPU Backplanes CS1W-BC023 0.11
C
P
U
B
a
c
k
p
l
a
n
e
s
CS1W-BC033 0.11
CS1W-BC053 0.11
CS1W-BC083 0.11
CS1W-BC103 0.11
I/O Control Module CS1W-IC102 0.92
CS1 Expansion Backplanes (for CS1 Modules only) CS1W-BI032 0.23
C
S
1
E
x
p
a
n
s
i
o
n
B
a
c
k
p
l
a
n
e
s
(
f
o
r
C
S
1
M
o
d
u
l
e
s
o
n
l
y
)
CS1W-BI052 0.23
CS1W-BI082 0.23
CS1W-BI102 0.23
CS1 Expansion Backplanes CS1W-BI033 0.23
C
S
1
E
x
p
a
n
s
i
o
n
B
a
c
k
p
l
a
n
e
s
CS1W-BI053 0.23
CS1W-BI083 0.23
CS1W-BI103 0.23
I/O Interface Module CS1W-II102 0.23
C200H Expansion I/O Backplanes C200HW-BI031 0.15
C
2
0
0
H
E
x
p
a
n
s
i
o
n
I
/
O
B
a
c
k
p
l
a
n
e
s
C200HW-BI051 0.15
C200HW-BI081-V1 0.15
C200HW-BI101-V1 0.15
Note: Add 0.15 A per port when the NT-AL001-E is connected.
Basic I/O Modules
Category Name Model Consumption (A)
C200H Input Modules DC Input Modules C200H-ID211 0.01
C
2
0
0
H
I
n
p
u
t
M
o
d
u
l
e
s
D
C
I
n
p
u
t
M
o
d
u
l
e
s
C200H-ID212 0.01
AC Input Modules C200H-IA121 0.01
A
C
I
n
p
u
t
M
o
d
u
l
e
s
C200H-IA122 0.01
C200H-IA122V 0.01
C200H-IA221 0.01
C200H-IA222 0.01
C200H-IA222V 0.01
AC/DC Input Modules C200H-IM211 0.01
A
C
/
D
C
I
n
p
u
t
M
o
d
u
l
e
s
C200H-IM212 0.01
B7A Interface Modules C200H-B7AI1 0.10
B
7
A
I
n
t
e
r
f
a
c
e
M
o
d
u
l
e
s
C200H-B7A12 0.10
Interrupt Input Modules C200HS-INT01 0.02
(This table continues on the next page.)
System Power and Expansion
Programmable Controller CS1
C--162
Current Consumption
Basic I/O Modules (continued)
Category Name Model Consumption (A)
C200H Group-2 High-density
I
t
M
d
l
DC Input Modules C200H-ID216 0.10
C
2
0
0
H
G
r
o
u
p
2
H
i
g
h
d
e
n
s
i
t
y
Input Modules
D
C
I
n
p
u
t
M
o
d
u
l
e
s
C200H-ID217 0.12
C200H-ID218 0.10
C200H-ID219 0.12
C200H-ID111 0.12
CS1 Input Modules DC Input Modules CS1W-ID211 0.10
C
S
1
I
n
p
u
t
M
o
d
u
l
e
s
D
C
I
n
p
u
t
M
o
d
u
l
e
s
CS1W-ID231 0.15
CS1W-ID261 0.15
CS1W-ID291 0.20
AC Input Modules CS1W-IA111 0.11
A
C
I
n
p
u
t
M
o
d
u
l
e
s
CS1W-IA211 0.11
Interrupt Input Module CS1W-INT01 0.10
High-speed Input Module CS1W-IDP01 0.10
Safety Relay Module CS1W-SF200 0.10
C200H Output Modules Relay Output Modules C200H-OC221 0.01
C
2
0
0
H
O
u
t
p
u
t
M
o
d
u
l
e
s
R
e
l
a
y
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OC222 0.01
C200H-OC222N 0.008
C200H-OC225 0.05
C200H-OC226N 0.03
C200H-OC223 0.01
C200H-OC224 0.01
C200H-OC224N 0.01
Transistor Output Modules C200H-OD411 0.14
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OD213 0.14
C200H-OD214 0.14
C200H-OD216 0.01
C200H-OD211 0.16
C200H-OD217 0.01
C200H-OD212 0.18
C200H-OD21A 0.16
B7A Interface Modules C200H-B7A01 0.10
B
7
A
I
n
t
e
r
f
a
c
e
M
o
d
u
l
e
s
C200H-B7A02 0.10
Triac Output Modules C200H-OA223 0.18
T
r
i
a
c
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OA222V 0.20
C200H-OA224 0.27
CS1 Output Modules Relay Output Modules CS1W-OC201 0.10
C
S
1
O
u
t
p
u
t
M
o
d
u
l
e
s
R
e
l
a
y
O
u
t
p
u
t
M
o
d
u
l
e
s
CS1W-OC211 0.13
Transistor Output Modules CS1W-OD211 0.17
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
M
o
d
u
l
e
s
CS1W-OD212 0.17
CS1W-OD231 0.27
CS1W-OD232 0.27
CS1W-OD261 0.39
CS1W-OD262 0.39
CS1W-OD291 0.48
CS1W-OD292 0.48
Triac Output Modules CS1W-OA201 0.23 max. (0.07+0.02×
No. of points ON)
CS1W-OA211 0.406 max. (0.07+0.021×No. of points
ON)
C200H Group-2 High-density
O
t
t
M
d
l
Transistor Output Modules C200H-OD218 0.27
C
2
0
0
H
G
r
o
u
p
2
H
i
g
h
d
e
n
s
i
t
y
Output Modules
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OD21B 0.48
C200H-OD219 0.48
(This table continues on the next page.)
System Power and Expansion
Programmable Controller CS1 C--163
Current Consumption
Basic I/O Modules (continued)
Category Name Model Consumption (A)
CS1 I/O Modules DC Input/Transistor Output
M
d
l
CS1W-MD261 0.27
C
S
1
I
/
O
M
o
d
u
l
e
s
D
C
I
n
p
u
t
/
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
Modules CS1W-MD262 0.27
CS1W-MD561 0.27
CS1 I/O Modules CS1W-MD291 0.35
CS1 I/O Modules CS1W-MD292 0.35
C200H I/O Modules B7A Interface Modules C200H-B7A21 0.10
C
2
0
0
H
I
/
O
M
o
d
u
l
e
s
B
7
A
I
n
t
e
r
f
a
c
e
M
o
d
u
l
e
s
C200H-B7A22 0.10
Analog Timer Module C200H-TM001 0.06
Special I/O Modules
Category Name Model Consumption (A)
C200H
H
i
h
d
i
t
I
/
O
DC Input Module C200H-ID215 0.13
C
2
0
0
H
High-density I/O
M
o
d
u
l
e
s
(
S
p
e
c
i
a
l
TTL Input Module C200H-ID501 0.13
M
o
d
u
l
e
s
(
S
p
e
c
i
a
l
I
/
O
M
o
d
u
l
e
s
)
Transistor Output Module C200H-OD215 0.22
I
/
O
M
o
d
u
l
e
s
)
TTL Output Module C200H-OD501 0.22
TTL I/O Module C200H-MD501 0.18
DC Input Transistor Output Module C200H-MD215 0.18
D
C
I
n
p
u
t
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
M
o
d
u
l
e
C200H-MD115 0.18
C200H Special
I
/
O
M
d
l
Temperature Control Modules C200H-TC001 0.33
C
2
0
0
H
S
p
e
c
i
a
l
I/O Modules
T
e
m
p
e
r
a
t
u
r
e
C
o
n
t
r
o
l
M
o
d
u
l
e
s
C200H-TC002 0.33
C200H-TC003 0.33
C200H-TC101 0.33
C200H-TC102 0.33
C200H-TC103 0.33
Heat/Cool Temperature Control Modules C200H-TV001 0.33
H
e
a
t
/
C
o
o
l
T
e
m
p
e
r
a
t
u
r
e
C
o
n
t
r
o
l
M
o
d
u
l
e
s
C200H-TV002 0.33
C200H-TV003 0.33
C200H-TV101 0.33
C200H-TV102 0.33
C200H-TV103 0.33
Temperature Sensor Modules C200H-TS001 0.45
T
e
m
p
e
r
a
t
u
r
e
S
e
n
s
o
r
M
o
d
u
l
e
s
C200H-TS002 0.45
C200H-TS101 0.45
C200H-TS102 0.45
PID Control Modules C200H-PID01 0.33
P
I
D
C
o
n
t
r
o
l
M
o
d
u
l
e
s
C200H-PID02 0.33
C200H-PID03 0.33
Cam Positioner Module C200H-CP114 0.30
ASCII Modules C200H-ASC02 0.20
A
S
C
I
I
M
o
d
u
l
e
s
C200H-ASC11 0.25
C200H-ASC21 0.30
C200H-ASC31 0.30
Analog Input Modules C200H-AD001 0.55
A
n
a
l
o
g
I
n
p
u
t
M
o
d
u
l
e
s
C200H-AD002 0.45
C200H-AD003 0.10
Analog Output Modules C200H-DA001 0.65
A
n
a
l
o
g
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-DA002 0.60
C200H-DA003 0.10
C200H-DA004 0.10
Analog I/O Modules C200H-MAD01 0.10
High-speed Counter Modules C200H-CT001-V1 0.30
H
i
g
h
s
p
e
e
d
C
o
u
n
t
e
r
M
o
d
u
l
e
s
C200H-CT002 0.30
C200H-CT021 0.45
Motion Control Module C200H-MC221 0.65 (w/ Teaching Box: 0.85 )
Position Control Modules C200HW- NC113 0.30
P
o
s
i
t
i
o
n
C
o
n
t
r
o
l
M
o
d
u
l
e
s
C200HW-NC213 0.30
C200HW-NC413 0.50
(This table continues on the next page.)
System Power and Expansion
Programmable Controller CS1
C--164
Current Consumption
Special I/O Modules (continued)
Category Name Model Consumption (A)
C200H Special
I
/
O
M
d
l
ID Sensor Modules C200H-IDS01-V1 0.25
C
2
0
0
H
S
p
e
c
i
a
l
I/O Modules
I
D
S
e
n
s
o
r
M
o
d
u
l
e
s
C200H-IDS21 0.25
Fuzzy Logic Module C200H-FZ001 0.30
Voice Module C200H-OV001 0.30
PC Card Module C200HW-PCV01 (See note.)
DeviceNet Master Module C200HW-DRM21-V1 0.25
DeviceNet I/O Link Module C200HW-DRT21 0.25
Profibus-DP Master Module C200HW-PRM21 0.6
Profibus I/O Link Module C200HW-PRT21 0.25
CompoBus/S Master Module C200HW-SRM21-V1 0.15
PC Link Module C200H-LK401 0.35
Note: The consumption depends on the commercial memory card used. Calculate the consumption using the following.
+5 VDC, 0.7 A max. (for each Module) + PC card output current (Icard)
I5V (1 slot) ≤0.5 A, I12V (1 slot) ≤0.1 A
However, Icard = I5V (2 slots) + 3.4 ×I12V (2 slots) ≤1.0 A
Category Name Model Consumption (A)
CS1 Special I/O
M
d
l
Analog Input Module CS1W-ADjjj 0.13
C
S
1
S
p
e
c
i
a
l
I
/
O
Module Analog Output Module CS1W-DAjjj 0.13
Analog I/O Module CS1W-MAD44 0.20
Isolated Thermocouple Input Module CS1W-PTS01 0.15
Isolated Temperature- resistance Thermometer
Input Module
CS1W-PTS02
0
.
1
5
Isolated Temperature- resistance Thermometer
Input Module (Ni508.4 Ω)
CS1W-PTS03
Isolated Two-wire Transmission Device Input
Module
CS1W-PTW01 0.16
Isolated DC Input Module CS1W-PDC01
Isolated Pulse Input Module CS1W-PPS01
Isolated Control Output Module CS1W-PMV01
Power Transducer Input Module CS1W-PTR01 0.08
1
0
0
m
V
D
C
I
n
p
u
t
M
o
d
u
l
e
C
S
1
W
P
T
R
0
2
0
.
0
8
1
0
0
-
m
V
D
C
I
n
p
u
t
M
o
d
u
l
e
C
S
1
W
-
P
T
R
0
2
Motion Control Modules CS1W-MC221 0.60 (w/ Teaching Box: 0.80 A)
M
o
t
i
o
n
C
o
n
t
r
o
l
M
o
d
u
l
e
s
CS1W-MC421 0.70 (w/ Teaching Box: 1.00 A)
Position Control Modules CS1W-NC113/ 133 0.25
P
o
s
i
t
i
o
n
C
o
n
t
r
o
l
M
o
d
u
l
e
s
CS1W-NC213/ 233
0
.
2
5
CS1W-NC413/ 433 0.36
High-speed Counter Modules CS1W-CT021
0
.
3
6
H
i
g
h
s
p
e
e
d
C
o
u
n
t
e
r
M
o
d
u
l
e
s
CS1W-CT041 0.45
CS1W-CTS21 0.32
Customizable Counter Modules CS1W-HCP22 0.80
C
u
s
t
o
m
i
z
a
b
l
e
C
o
u
n
t
e
r
M
o
d
u
l
e
s
CS1W-HCA22 0.75
CS1W-HIO01 0.60
ID Sensor Modules CS1W-V600C11 0.26
I
D
S
e
n
s
o
r
M
o
d
u
l
e
s
CS1W-V600C12 0.32
System Power and Expansion
Programmable Controller CS1 C--165
Current Consumption
CS1 CPU Bus Modules
Category Name Model Consumption (A)
CS1 CPU Bus Modules Loop Control Module CS1W-LC001 0.36
C
S
1
C
P
U
B
u
s
M
o
d
u
l
e
s
Controller Link Modules CS1W-CLK52-V1 0.65
C
o
n
t
r
o
l
l
e
r
L
i
n
k
M
o
d
u
l
e
s
CS1W-CLK21-V1 0.33
CS1W-CLK12-V1 0.52
SYSMAC LINK Module CS1W-SLK21 0.48
S
Y
S
M
A
C
L
I
N
K
M
o
d
u
l
e
CS1W-SLK11 0.47
Serial Communications Module CS1W-SCU21-V1 0.29 (See Note.)
Ethernet Module CS1W-ETN01/11 0.40
E
t
h
e
r
n
e
t
M
o
d
u
l
e
CS1W-ETN21 0.38
DeviceNet Module CS1W-DRM21 0.29
Note: Add 0.15 A per port when the NT-AL001-E is connected.
26-V Current Consumption
Category Name Model Consumption (A)
C200H Output Modules Relay Output Modules C200H-OC221 0.075 for 8 points ON
t
t
h
t
i
C
2
0
0
H
O
u
t
p
u
t
M
o
d
u
l
e
s
R
e
l
a
y
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OC222
0
.
0
7
5
f
o
r
8
p
o
i
n
t
s
O
N
at the same time
C200H-OC223
C200H-OC224
C200H-OC225
C200H-OC222N 0.09 for 8 points ON at
t
h
t
i
C200H-OC226N
0
.
0
9
f
o
r
8
p
o
i
n
t
s
O
N
a
t
thesametime
C200H-OC224N
Transistor Output Modules C200H-OD216 0.075 for 8 points ON
t
t
h
t
i
T
r
a
n
s
i
s
t
o
r
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-OD217
0
.
0
7
5
f
o
r
8
p
o
i
n
t
s
O
N
at the same time
CS1 Output Modules Relay Output Modules CS1W-OC201 0.006 for each point
O
N
t
t
h
t
i
C
S
1
O
u
t
p
u
t
M
o
d
u
l
e
s
R
e
l
a
y
O
u
t
p
u
t
M
o
d
u
l
e
s
CS1W-OC211
0
.
0
0
6
f
o
r
e
a
c
h
p
o
i
n
t
ON at the same time
C200H Special I/O Modules Analog Intput Module C200H-AD003 0.10
C
2
0
0
H
S
p
e
c
i
a
l
I
/
O
M
o
d
u
l
e
s
Analog Output Modules C200H-DA003 0.20
A
n
a
l
o
g
O
u
t
p
u
t
M
o
d
u
l
e
s
C200H-DA004 0.25
Analog I/O Module C200H-MAD01 0.20
ID Sensor Modules C200H-IDS01-V1 0.12
I
D
S
e
n
s
o
r
M
o
d
u
l
e
s
C200H-IDS21 0.12
CS1 Special I/O Modules Analog Input Module CS1W-ADjjj 0.10
C
S
1
S
p
e
c
i
a
l
I
/
O
M
o
d
u
l
e
s
Analog Output Modules CS1W-DA041 0.18
A
n
a
l
o
g
O
u
t
p
u
t
M
o
d
u
l
e
s
CS1W-DA08V 0.18
CS1W-DA08C 0.25
Analog I/O Module CS1W-MAD44 0.20
Isolated Thermocouple Input Module CS1W-PTS01-V1 0.15
Isolated Temperature- resistance
Thermometer Input Module
CS1W-PTS02
0
.
1
5
Isolated Temperature- resistance
Thermometer Input Module (Ni508.4 Ω)
CS1W-PTS03
Isolated Two-wire Transmission Device
Input Module
CS1W-PTW01 0.16
Isolated DC Input Module CS1W-PDC01
Isolated Pulse Input Module CS1W-PPS01
Isolated Control Output Module CS1W-PMV01
Power Transducer Input Module CS1W-PTR01 0.08
100-mV DC Input Module CS1W-PTR02
0
.
0
8
Customizable Counter Module CS1W-HCA22 0.15
ID Sensor Module CS1W-V600C11 0.12
System Power and Expansion
Programmable Controller CS1
C--166
Replacing C200H I/O Modules
JReplacing C200H I/O Modules with CS1 I/O Modules
This section shows the corresponding CS1 I/O models and notes for replacing C200H I/O Modules.
16-point DC Input Modules
Item C200H I/O Modules Corresponding CS1 I/O Modules
Model number C200H-ID212 CS1W-ID211
Description 16-point DC Input Modules with terminal blocks
Notes The terminal arrangement must be changed.
The impedance increases (from 3 kΩto 3.3 kΩ). Check that correct operation is possible in
cases where increased impedance may influence operation.
The internal 5-V current consumption increases (from 10 mA to 100 mA). Check that the
increased current is within the range of the power supply.
32-point DC Input Modules
Item C200H I/O Modules Corresponding CS1 I/O Modules
Model number C200H-ID218/C200H-ID216 CS1W-ID231
Description 32-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input
specifications are the same.
Notes There are 2 commons instead of 1. Connect where necessary.
The input specifications change (e.g., the impedance decreases and the input current
increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where
changes in input specifications may influence operation.
The internal 5-V current consumption increases (from 100 mA to 150 mA). Check that the
increased current is within the range of the power supply.
64-point DC Input Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-ID219/C200H-ID217 CS1W-ID261
Description 64-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input
specifications are the same.
Notes There are 4 commons instead of 2. Connect where necessary.
The input specifications change (e.g., the impedance decreases and the input current
increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where
changes in input specifications may influence operation.
The internal 5-V current consumption increases from 120 mA to 150 mA (C200H-ID219) and
from 100 mA to 150 mA (C200H-ID217). Check that the increased current is within the range of
the power supply.
16-point Sinking Transistor Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OD212 CS1W-OD211
Description 16-point Transistor Output (sinking) Modules with terminal blocks. The output current capacity
increases (from 0.3 A per point and 4.8 A per Module to 0.5 A per point and 8 A per Module).
he rated voltage range also increases (from 24 V to any voltage in the range 12 to 24 V.)
Notes The terminal arrangement must be changed.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.3 ms to 1 ms.)
System Power and Expansion
Programmable Controller CS1 C--167
Replacing C200H I/O Modules
16-point Sourcing Transistor Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OD21A CS1W-OD212
Description 16-point Transistor Output (sourcing) Modules with terminal blocks.
Notes The terminal arrangement must be changed.
The output capacity changes (from 1 A per point and 4 A per Module to 0.5 A per point and 5 A
per Module). Check that correct operation is possible in cases where changes in output capacity
may influence operation.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.3 ms to 1 ms.)
The internal 5-V current consumption increases (from 160 mA to 170 mA). The external
24-V power supply current also increases (from 35 mA to 40 mA). Check that the increased
current is within the range of the power supply.
There are no alarm output contacts. Use the alarm bits in the Auxiliary Area.
32-point Sinking Transistor Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OD218 CS1W-OD231
Description 32-point Transistor Output (sinking) Modules with connectors. The connectors and the pin
arrangement are the same. The output current capacity increases (from 100 mA to 0.5 A per
point, 2.5 A per common, and 5 A per Module).
The load voltage range changes from 4.5 to 26.4 V to 10.2 to 26.4 V.
Notes There are 2 commons instead of 1. Connect where necessary.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.4 ms to 1 ms.)
Replacement is not possible for applications with an output load range of 4.5 to 10.2 V.
The internal 5-V current consumption increases (from 180 mA to 270 mA). Check that the
increased current is within the range of the power supply.
32-point Sourcing Transistor Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OD21B CS1W-OD232
Description 32-point Transistor Output (sourcing) Modules with connectors. The connectors and the pin
arrangement are the same.
Notes There are 2 commons instead of 1. Connect where necessary.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.3 ms to 1 ms.)
The internal 5-V current consumption increases (from 180 mA to 270 mA). Check that the
increased current is within the range of the power supply.
System Power and Expansion
Programmable Controller CS1
C--168
Replacing C200H I/O Modules
64-point Sinking Transistor Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OD219 CS1W-OD261
Description 64-point Transistor Output (sinking) Modules with connectors. The connectors and the pin
arrangement are the same. The output current capacity increases (from 100 mA to 0.3 A per
point, 1.6 A per common, and 6.4 A per Module). The load voltage range changes from 4.5 to
26.4 V to 10.2 to 26.4 V.
Notes There are 4 commons instead of 2. Connect where necessary.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.4 ms to 1 ms.)
Replacement is not possible for applications with an output load range of 4.5 to 10.2 V.
The internal 5-V current consumption increases (from 270 mA to 390 mA). Check that the
increased current is within the range of the power supply.
16-point 100-VAC Input Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-IA122/122V CS1W-IA111
Description 16-point 100-VAC Input Modules with terminal blocks. 100-VDC input also possible.
Notes The terminal arrangement must be changed.
The input specifications change. Check that correct operation is possible in cases where
changes in input specifications may influence operation. (ON voltage increases from 60 VAC
min. to 65 VAC min. and the input impedance (50 Hz) increases from 9.7 kΩto 10 kΩ.)
The internal 5-V current consumption increases (from 10 mA to 110 mA). Check that the
increased current is within the range of the power supply.
16-point 200-VAC Input Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-IA222/222V CS1W-IA211
Description 16-point 200-VAC Input Modules with terminal blocks. The input specifications are the same.
Notes The terminal arrangement must be changed.
The internal 5-V current consumption increases (from 10 mA to 110 mA). Check that the
increased current is within the range of the power supply.
8-point Triac Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OA223 CS1W-OA201
Description 8-point Triac Output Modules with terminal blocks. The output current capacity increases
(from 4 A per Module to 4.8 A per Module).
Notes The terminal arrangement must be changed.
The maximum inrush current changes. Check that correct operation is possible in cases
where changes in maximum inrush current may influence operation. (Changes from 15 A for
a pulse width of 100 ms and 30 A for a pulse width of 10 ms to 10 A for a pulse width of
100 ms and 20 A for a pulse width of 10 ms.)
The internal 5-V current consumption increases (from 180 mA to 230 mA). Check that the
increased current is within the range of the power supply.
System Power and Expansion
Programmable Controller CS1 C--169
Replacing C200H I/O Modules
16-point Triac Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OA224 CS1W-OA211
Description 16-point Triac Output Modules with terminal blocks. The number of output points increases
(from 12 to 16). The output current capacity also increases (from 2 A per Module to 4 A per
Module).
Notes The terminal arrangement must be changed.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Maximum inrush current
decreases from 20 A for a pulse width of 10 ms to 15 A for a pulse width of 10 ms and the
residual voltage increases from 1.5 VAC (50 to 500 mA) to 1.6 VAC.)
The internal 5-V current consumption increases (from 270 mA to 406 mA). Check that the
increased current is within the range of the power supply.
8-point Independent Relay Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OC224/OC224N CS1W-OC201
Description Relay Output Modules with 8 independent output points and terminal blocks. 100-VDC input
also possible.
Notes The terminal arrangement must be changed.
The ON/OFF response time changes (C200H-OC224 only). Check that correct operation is
possible in cases where an increased ON/OFF response time may influence operation.
(Increases from 10 ms to 15 ms)
The internal 5-V current consumption increases (from 10 mA to 100 mA). Check that the
increased current is within the range of the power supply.
16-point Relay Output Modules
Item C200H I/O Module Corresponding CS1 I/O Module
Model number C200H-OC225/OC226N CS1W-OC211
Description 16-point Relay Output Modules with terminal blocks. Restrictions on the number of points per
current for simultaneous turning ON of more than 1 contact are removed. 100-VDC input also
possible.
Notes The terminal arrangement must be changed.
The ON/OFF response time changes (C200H-OC225 only). Check that correct operation is
possible in cases where an increased ON/OFF response time may influence operation.
(Increases from 10 ms to 15 ms)
The internal 5-V current consumption increases (from the range 30 to 50 mA to 130 mA at
5 V and from the range 75 to 90 mA to 96 mA at 26 V.) Check that the increased current is
within the range of the power supply.
