SMA6J High junction temperature TransilTM Features Peak pulse power: - 600 W (10/1000 s) - 4 kW (8/20 s) Stand off voltage range: from 5 V to 188 V Unidirectional and bidirectional types Low clamping voltage versus standard series Low leakage current: - 0.2 A at 25 C - 1 A at 85 C Operating Tj max: 175 C JEDEC registered package outline A K Unidirectional Bidirectional SMA (JEDEC DO-214AC) Complies with the following standards IEC 61000-4-2 level 4: - 15 kV (air discharge) - 8 kV (contact discharge) MIL STD 883G-Method 3015-7: class3B - 25 kV (human body model) Description The SMA6J Transil series has been designed to protect sensitive equipment against electro-static discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical over stress such as IEC 61000-4-4 and 5. They are generally for surges below 600 W 10/1000 s. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. Their low clamping voltages provides a better safety margin to protect sensitive circuits with extended life time expectancy. Packaged in SMA, this minimizes PCB space consumption (SMA footprint in accordance with IPC 7531 standard). November 2007 TM: Transil is a trademark of STMicroelectronics Rev 2 1/10 www.st.com 10 Characteristics SMA6J 1 Characteristics Table 1. Absolute ratings (Tamb = 25 C) Symbol Parameter Value Unit 600 W Peak pulse power dissipation (1) Tj initial = Tamb Power dissipation on infinite heatsink Tamb = 55 C 4 W IFSM Non repetitive surge peak forward current for unidirectional types tp = 10 ms Tj initial = Tamb 60 A Tstg Storage temperature range -65 to +175 C Tj Operating junction temperature range -55 to +175 C TL Maximum lead temperature for soldering during 10 s 260 C Value Unit PPP P 1. For a surge greater than the maximum values, the diode will fail in short-circuit. Table 2. Thermal resistances Symbol Parameter Rth (j-l) Junction to leads 30 C/W Rth (j-a) Junction to ambient on printed circuit on recommended pad layout 120 C/W Table 3. Symbol Electrical characteristics - definitions (Tamb = 25 C) Parameter VRM Stand-off voltage VBR Breakdown voltage VCL Clamping voltage IRM Leakage current @ VRM IPP Peak pulse current T Voltage temperature coefficient VF Forward voltage drop RD Dynamic resistance 2/10 I I IF IPP VF VCL VBR VRM V IRM IR IRM V IRM IR IR IPP VCLVBR VRM Unidirectional IPP VRMVBR VCL Bidirectional SMA6J Table 4. Characteristics Electrical characteristics - values (Tamb = 25 C) VBR @IR(1) IRM max@VRM Type 25 C 85 C A min V typ max V mA VCL @IPP RD(2) VCL @IPP RD(2) 10/1000 s 10/1000 s 8/20 s 8/20 s T(3) max max max V A V A 10-4/C SMA6J5.0A/CA 20 50 5.0 6.40 6.74 7.07 10 9.1 68 0.029 13.4 298 0.021 5.7 SMA6J6.0A/CA 20 50 6.0 6.70 7.05 7.41 10 9.5 61 0.034 13.7 290 0.022 5.9 SMA6J6.5A/CA 20 50 6.5 7.20 7.58 7.96 10 10.2 56 0.040 14.5 276 0.024 6.1 SMA6J8.5A/CA 20 50 8.5 10.4 1 13.3 41.7 0.070 18.7 205 0.041 7.3 SMA6J10A/CA 0.2 1 10 11.1 11.7 12.3 1 15.7 37 0.093 19.6 184 0.040 7.8 SMA6J12A/CA 0.2 1 12 13.3 14.0 14.7 1 18.8 31 0.133 23.5 157 0.056 8.3 SMA6J13A/CA 0.2 1 13 14.4 15.2 15.9 1 20.4 29 0.154 23.9 147 0.054 8.4 SMA6J15A/CA 0.2 1 15 16.7 17.6 18.5 1 23.6 25.1 0.206 27.7 123 0.075 8.8 SMA6J18A/CA 0.2 1 18 20.0 21.1 22.1 1 28.3 21.5 0.288 33.2 102 0.108 9.2 SMA6J20A/CA 0.2 1 20 22.2 23.4 24.5 1 31.4 19.4 0.354 36.8 93 0.132 9.4 SMA6J24A/CA 0.2 1 24 26.7 28.1 29.5 1 37.8 0.516 44.3 80 0.184 9.6 SMA6J26A/CA 0.2 1 26 28.9 30.4 31.9 1 40.9 14.9 0.600 47.9 75 0.213 9.7 SMA6J28A/CA 0.2 1 28 31.1 32.7 34.4 1 44.0 13.8 0.697 51.6 68 0.253 9.8 SMA6J33A/CA 0.2 1 33 36.7 38.6 40.6 1 51.9 11.8 0.963 60.8 57 0.356 10.0 SMA6J40A/CA 0.2 1 40 44.4 46.7 49.1 1 62.8 9.7 1.42 73.6 48 0.511 10.1 SMA6J48A/CA 0.2 1 48 53.3 56.1 58.9 1 75.4 8.1 2.04 88.4 40 0.736 10.3 SMA6J58A/CA 0.2 1 58 64.4 67.8 71.2 1 91.1 6.7 2.97 100 33 0.863 10.4 SMA6J70A/CA 0.2 1 70 77.8 81.9 86.0 1 110 5.5 4.38 120 27 1.27 10.5 SMA6J85A/CA 0.2 1 85 94 99 104 1 134 4.6 6.45 146 22.5 1.85 10.6 SMA6J100A/CA 0.2 1 100 111 117 123 1 157 3.8 9.03 172 19 2.58 10.7 SMA6J130A/CA 0.2 1 130 144 152 159 1 204 3 14.9 223 15 4.24 10.8 SMA6J154A/CA 0.2 1 154 171 180 189 1 242 2.4 22.1 265 12.6 6.00 10.8 SMA6J170A/CA 0.2 1 170 189 199 209 1 275 2.2 30.0 292 11.3 7.39 10.8 SMA6J188A/CA 0.2 1 188 209 220 231 1 328 2 48.5 323 10.3 8.97 10.8 9.4 9.9 16 1. Pulse test: tp <50ms. 2. To calculate maximum clamping voltage at other surge currents, use the following formula VCLmax = RD x IPP + VBRmax 3. To calculate VBR versus junction temperature, use the following formula: %IPP Repetitive peak pulse current tr = rise time (s) tp = pulse duration time (s) 100 VBR @ Tj = VBR @ 25 C x (1 + T x (Tj - 25)) 50 0 tr tp t 3/10 Characteristics Figure 1. SMA6J Peak power dissipation versus initial junction temperature Figure 2. Peak pulse power versus exponential pulse duration (Tj initial = 25 C) PPP(kW) % 10.0 110 Tj initial=25C 100 90 80 70 60 1.0 50 40 30 20 10 Tj(C) tp(ms) 0 0.1 0 25 Figure 3. 50 75 100 125 150 175 200 0.01 0.10 1.00 10.00 Clamping voltage versus peak pulse current (exponential waveform, maximum values) IPP(A) 1.E+03 Tj = 25C SMA6J5.0A/CA SMA6J10A/CA SMA6J15A/CA 1.E+02 tp = 20 s SMA6J26A/CA SMA6J48A/CA SMA6J100A/CA SMA6J188A/CA 1.E+01 1.E+00 tp = 1 ms VCL(V) 1.E-01 1 4/10 10 100 1000 SMA6J Characteristics Figure 4. Junction capacitance versus reverse applied voltage (typical values) (SMA6JxxA) Figure 5. C(pF) Junction capacitance versus reverse applied voltage (typical values) (SMA6JxxCA) C(pF) 10000 10000 F=1MHz VOSC=30mVRMS Tj=25C F=1MHz VOSC=30mVRMS Tj=25C 1000 SMA6J5.0A SMA6J5.0CA 1000 SMA6J13CA SMA6J13A 100 SMA6J26CA SMA6J26A SMA6J58CA 100 10 SMA6J58A SMA6J188CA VR(V) 10 1 1 10 Figure 6. VR(V) SMA6J188A 100 1 1000 Peak forward voltage drop versus peak forward current (typical values) 10 Figure 7. 100 1000 Relative variation of thermal impedance junction to ambient versus pulse duration (printed ciruit board FR4, SCu = 1 cm2) Zth(j-a)/Rth(j-a) IFM(A) 1.00 1.E+01 Tj=125C 1.E+00 Tj=25C 0.10 1.E-01 VFM(V) tp(S) 1.E-02 0.01 0.4 0.5 Figure 8. 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.E-02 1.E-01 Figure 9. Thermal resistance junction to ambient versus copper surface under each lead (printed circuit board FR4, eCu = 35 m) Rth(j-a)(C/W) 1.E+00 1.E+01 1.E+02 1.E+03 Leakage current versus junction temperature (typical values) IR(nA) 130 1.E+04 120 VR=VRM 110 VBR11.7V 1.E+03 100 90 1.E+02 VBR>11.7V 80 70 1.E+01 60 50 SCU(cm2) Tj(C) 1.E+00 40 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 25 50 75 100 125 150 175 5/10 Ordering information scheme 2 SMA6J Ordering information scheme Figure 10. Ordering information scheme SM Surface Mount Package A = SMA package Surge rating 6J = 600 W Stand off voltage example - 85 = 85 V Type A = Unidirectional CA = Bidirectional Delivery mode TR = Tape and reel 6/10 A 6J xx CA - TR SMA6J Package information Case: JEDEC DO-214AC molded plastic over Planar junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the band indicates cathode. Flammability: Epoxy is rated UL94V-0 RoHS package In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Table 5. SMA dimensions Dimensions Ref. Millimeters Inches E1 D E A1 A2 C L Min. Max. Min. Max. A1 1.90 2.03 0.075 0.08 A2 0.05 0.20 0.002 0.008 b 1.25 1.65 0.049 0.065 c 0.15 0.40 0.006 0.016 D 2.25 2.90 0.089 0.114 E 4.80 5.35 0.189 0.211 E1 3.95 4.60 0.156 0.181 L 0.75 1.50 0.030 0.059 b Figure 11. SMA footprint dimensions 1.40 2.63 1.40 (0.055) (0.104) (0.055) Figure 12. Marking information 1.64 Cathode bar (unidirectional devices only ) 5.43 (0.214) (0.065) 3 Package information e3 x x x z y ww e3: ECOPACK ( Leadfree) XXX: Marking Z: Manufacturing location Y: Year WW: week milimeters (inches) 7/10 Package information Table 6. 8/10 SMA6J Marking Type Marking Type Marking SMA6J5.0A-TR 6UA SMA6J5.0CA-TR 6BA SMA6J6.0A-TR 6UB SMA6J6.0CA-TR 6BB SMA6J6.5A-TR 6UC SMA6J6.5CA-TR 6BC SMA6J8.5A-TR 6UD SMA6J8.5CA-TR 6BD SMA6J10A-TR 6UE SMA6J10CA-TR 6BE SMA6J12A-TR 6UF SMA6J12CA-TR 6BF SMA6J13A-TR 6UG SMA6J13CA-TR 6BG SMA6J15A-TR 6UH SMA6J15CA-TR 6BH SMA6J18A-TR 6UJ SMA6J18CA-TR 6BJ SMA6J20A-TR 6UK SMA6J20CA-TR 6BK SMA6J24A-TR 6UM SMA6J24CA-TR 6BM SMA6J26A-TR 6UN SMA6J26CA-TR 6BN SMA6J28A-TR 6UO SMA6J28CA-TR 6BO SMA6J33A-TR 6UQ SMA6J33CA-TR 6BQ SMA6J40A-TR 6UR SMA6J40CA-TR 6BR SMA6J48A-TR 6US SMA6J48CA-TR 6BS SMA6J58A-TR 6UT SMA6J58CA-TR 6BT SMA6J70A-TR 6UU SMA6J70CA-TR 6BU SMA6J85A-TR 6UV SMA6J85CA-TR 6BV SMA6J100A-TR 6UW SMA6J100CA-TR 6BW SMA6J130A-TR 6UX SMA6J130CA-TR 6BX SMA6J154A-TR 6UY SMA6J154CA-TR 6BY SMA6J170A-TR 6UZ SMA6J170CA-TR 6BZ SMA6J188A-TR 6UAA SMA6J188CA-TR 6BAA SMA6J 4 Ordering information Ordering information Table 7. Ordering information Order code(1) Marking Package Weight Base qty Delivery mode SMA6JxxA-TR See Table 6. SMA 0.068 g 5000 Tape and reel SMA6JxxCA-TR See Table 6. SMA 0.068 g 5000 Tape and reel 1. xx indicates stand-off voltage 5 Revision history Table 8. Document revision history Date Revision Changes 21-Feb-2007 1 First issue. 07-Nov-2007 2 Updated Description. Improved readability of Ordering information scheme. Reformatted to current standards. 9/10 SMA6J Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10