PA050XS1-DHB - AZ Displays, Inc. - Datasheet.Directory

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1

Version : 1.6

TECHNICAL SPECIFICATION

MODEL NO. : PA050XS1

Customer’s Confirmation

Customer

Date

PVI’s Confirmation

Confirmed By

Prepared By

FOR MORE INFORMATION:

AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA, 92656

http://www.AZDISPLAYS.com

Date : Jul. 15, 2004

This technical specification is subject to change without notice.

Please return 1 copy with your signature on this page for approval.

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2

TECHNICAL SPECIFICATION

CONTENTS

NO. ITEM PAGE

- Cover (PA050XS1) 1

- Contents 2

1 Application 3

2 Features 3

3 Mechanical Specifications 3

4 Mechanical Drawing of TFT-LCD module 4

5 Input / Output Terminals 5

6 Pixel Arrangement and input connector pin NO. 7

7 Absolute Maximum Ratings 8

8 Electrical Characteristics 8

9 Power On Sequence 18

10 Optical Characteristics 18

11 Handling Cautions 22

12 Reliability Test 23

13 Indication of Lot Number Label 23

14 Block Diagram 24

15 Packing 25

- Revision History 26

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3

1. Application

This technical specification applies to 5” color TFT-LCD module , PA050XS1. The applications of the

panel are car TV, portable DVD, GPS, multimedia applications and others AV system..

2. Features

. Compatible with NTSC & PAL system

. Pixel in stripe configuration

. Slim and compact

. Image Reversion : Up/Down and Left/Right

3. Mechanical Specifications

Parameter Specifications Unit

Screen Size 5 (diagonal) inch

Display Format 960×234 dot

Active Area 102.72(H)× 74.53(V) mm

Dot Pitch 0.107 (H)× 0.319 (V) mm

Pixel Configuration Stripe

Outline Dimension 119.3(W)× 91.4(H)× 7.5(D)(typ.) mm

Surface Treatment Anti - Glare

Weight 124±5 g

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4

4. Mechanical Drawing of TFT-LCD Module

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5

5. Input / Output Terminals

TFT-LCD Module Connector

FPC Down Connect , 30Pins , Pitch : 0.5 mm

Pin No Symbol I/O Description Remark

1 DIO1 I/O Vertical start pulse Note 5 – 5

2 CPV I Shift clock for gate driver

3 VGL I Power for gate driver (AC voltage) Note 5 - 1

4 NC - No connection

5 VEE I Negative power for gate driver (DC voltage) Note 5 - 2

6 NC - No connection

7 XOE I Output enable for gate driver

8 VSS - Ground for digital circuit

9 VCC I Supply voltage for logic control circuit for gate driver Note 5 - 3

10 NC - No connection

11 VGH I Positive power for gate driver Note 5 - 4

12 NC - No connection

13 U/D I Up/Down control for gate driver Note 5 – 5

14 DIO2 I/O Vertical start pulse Note 5 – 5

15 VCOM I Common electrode voltage Note 5 – 1

16 STH1 I/O Start pulse for source driver Note 5 – 5

17 VDD1 I Supply power for digital circuit Note 5 – 3

18 VSS1 - Ground for digital circuit

19 VDD2 I Supply power for analog circuit Note 5 – 3

20 VSS2 - Ground for analog circuit

21 R/L I Left/Right control for source driver Note 5 – 5

22 VR I Video input R Note 5 – 1

23 VG I Video input G Note 5 – 1

24 VB I Video input B Note 5 – 1

25 CPH1 I Sampling and shift clock for source driver

26 CPH2 I Sampling and shift clock for source driver

27 CPH3 I Sampling and shift clock for source driver

28 STH2 I/O Start pulse for source driver Note 5 – 5

29 OEH I Output enable for source driver

30 NC - No connection

Note 5 – 1 : VCOM = 6VPP.

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6

Phase of the video signal input and VCOM

The relation between these values could refer to 8-1 Operating condition.

Fig.1

Liquid crystal transmission of the video signal input, VCOM and timing

VCOM

H Level L Level

Video Signal Input Maximum Black White

Video Signal Input Minimum White Black

White : maximum transmission / Black : minimum transmission

Note 5 – 2 : VEE = -15V (Typ.).

Note 5 – 3 : VDD1, VCC = +3.3V, VDD2 = +5V (Typ.)

Note 5 – 4 : VGH = +17V (Typ.).

Note 5 – 5 : STH1, STH2 and R/L mode

R/L STH1 STH2 Remark

High(VDD) Input Output Left to Right

Low(0 Volt.) Output Input Right to Left

100% white

pedestal

Composite Video

Signal

R,G,B Video

Signal

(

)

COM

1H 1H

GL AC

GL DC

COM DC

COM AC

i AC

i DC

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7

STV1, STV2, and U/D mode

U/D DIO1 DIO2 Remark

High(VDD) Input Output Down to Up

Low(0 Volt.) Output Input Up to Down

6. Pixel Arrangement and input connector pin NO.

RBGRBG

Line 1 Line 960

Row 1

Row 2

Row 3

Row 4

Row 233

Row 234

Gate driver

Source driver

Input

FPC

Pin 1 Pin 30

U/D(PIN 13)=High R/L(PIN 21)=High U/D(PIN 13)=Low R/L(PIN 21)=Low

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8

7. Absolute Maximum Ratings :

The followings are maximum values , which if exceeded, may cause faulty operation or damage to the

unit.

GND = 0 V， Ta = 25 ℃

Parameter Symbol MIN. MAX. Unit Remark

VDD2 -0.3 +5.8 V

Supply Voltage For Source Driver VDD1 -0.3 +7.0 V

CC -0.3 +6.0 V

GH-VEE -0.3 +40.0 V

H Level VGH -0.3 +25.0 V

Supply Voltage For Gate Driver

L Level VEE -16

+0.3 V

Analog Signal Input Level VR,VG,VB -0.2 VDD1+0.2 V Note 7-1

Storage Temperature -30 +80 ℃

Operation Temperature -20 +70 ℃ Note 7-2

Notes 7-1 : Analog Input Voltage means VR,VG,VB.

Notes 7-2 : Operating Temperature define that contrast, response time, other display

optical character are Ta=+25.

8. Electrical Characteristics

8-1) Operating Condition

Parameter Symbol MIN. Typ. MAX. Unit Remark

Analog VDD2 +4.5 +5.0 +5.5 V

Supply Voltage For Source

Driver Lo

ic V

+3.0 +3.3 +3.6 V

H level VGH +15 +17 +19 V

L level VGL DC -13 -12 -11 V

DC Component

of VGL

GL AC +6.0 VP-P AC Component

of VGL

Supply Voltage For Gate Driver

Logic VCC +3.0 +3.3 +3.6 V

Analog Signal input Level Amplitu +0.3 VCC-0.3 V

H level VIH 0.7 VDD1 - VDD1 V

Digital input voltage L level VIL -0.3 - 0.3 VDD1 V

H level VOH 0.7 VDD1 - VDD1 V

Digital output voltage L level V

L-0.3 - 0.3 VDD1 V

VCOM AC - +6.0 - VP-P AC Component

of VCOM

VCOM

VCOM DC 1.3 1.5 1.7 V

DC Component

of VCOM Note 8-1

Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level

range is 1.5V±1V , every module’s VCOM DC level shall be carefully adjusted to show a best

image performance.

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9

Note 8-2: Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray

scale.

8-2) Current Consumption (GND=0V)

Ta= 25 ℃

Parameter Symbol Condition Min. Typ. Max. Unit Remark

IGH V

GH=+17V - 0.08 0.12 mA

IGL V

GL=-12V - 1.57 2.35 mA VGL center voltage

ICC V

CC=+3.3V - 0.1 0.15 mA

IDD1 V

DD1=+3.3V - 1.2 3.0 mA

IEE V

EE=-15V - 0.1 0.15 mA

Current for Driver

IDD2 V

DD2=5V - 7.0 10.0 mA

8-3) Backlight driving & Power Consumption

Pin No Symbol Description Remark

1 VL1 Input terminal (Hi voltage side)

2 VL2 Input terminal (Low voltage side) Note 8-3

Note 8-3 : Low voltage side of backlight inverter connects with Ground of inverter circuits.

Ta= 25 ℃

Parameter Symbol Min. Typ. Max. Unit Remark

Lamp voltage VL 392

436 480 Vrms

Lamp current IL 3 6 8 mA Note 8-4

Lamp frequency PL 40 43 80

KHz Note 8-5

Kick-off voltage(25℃) Vs - - 890 Vrms Note 8-6

Kick-off voltage(0℃) Vs - - 1180 Vrms Note 8-6

Note 8-4 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output

lamp current must between Min. and Max. to avoid the abnormal display image caused

by B/L.

Note 8-5 : The waveform of lamp driving voltage should be as closed to a perfect SIN wave as

possible.

Note 8-6 : This value is not output voltage of inverter.

The voltage of inverter must larger than the starting voltage.

White

White Black

White

White Black

4.0±0.2V

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10

Power Consumption Ta= 25 ℃

Parameter Symbol Conditions TYP. Unit Remark

LCD Panel Power Consumption 60.0 mW Note 8-7

Backlight Lamp Power Consumption 2.62 W Note 8-8

Total Power Consumption 2.68 W

Note 8-7：The power consumption for backlight is not included.

Note 8-8：Backlight lamp power consumption is calculated by IL×VL.

8-4) Input / Output Connector

1. Backlight Connector

JST BHR-02VS-1,

Pin No. : 2 ,

Pitch : 3.5 mm

8-5) Timing Characteristics Of Input Signals

Characteristics Symbol Min. Typ. Max. Unit

Remark

Rising time tr - - 10 ns

Falling time tf - - 10 ns

High and low level pulse width tCPH 147 156 166 ns CPH1

CPH pulse duty tCWH 30 50 70 % CPH1

STH setup time tSUH 20 - - ns STH1,STH2

STH hold time tHDH 20 - - ns STH1,STH2

STH pulse width tSTH - 1 - tCPH STH1,STH2

STH period tH 61.5 63.5 65.5

μs STH1,STH2

OEH pulse width tOEH - 1.6 - μs OEH

Sample and hold disable time tDIS1 - 4.4 - μs

OEV pulse width tOEV - 12 - μs XOE

CKV pulse width tCKV - 32 - μs CPV

Clean enable time tDIS2 - 6 - μs

Horizontal display timing range tDH - 960 - tCPH/3

STV setup time tSUV 400 - - ns DIO1,DIO2

STV hold time tHDV 400 - - ns DIO1,DIO2

STV pulse width tSTV - - 1 tH DIO1,DIO2

Horizontal lines per field tV 256 262 268 tH

Vertical display start tSV 3 - tH

Vertical display timing range tDV 234 - tH

VCOM rising time trCOM - 5 μs

VCOM falling time tfCOM - 5 μs

VCOM delay time tDCOM - 3 μs

RGB delay time tDRGB - 1 μs

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11

8 – 6 ) Signal Timing Waveforms

trtf

10%

90%

10%

90%

tSUH tHDH

tSTH

tCPH

tCWH

50%50%

STH1(2)

CPH1

CPH2

(L)

CPH3

(L)

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12

Input

(STH1/STH2)

Output

(STH2/STH1)

CPH1

tDH

Fig. 8-2 Horizontal display timing range

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13

Fig. 8-3 (a) Horizontal timing

White

Blank

Black

VIDC

VIA VIAC

White

Black

Blank

(R,G,B)

(HSY)

OEH

STH1(2)

XOE

CPV

VC AC

VC DCVCOM

VGL AC

VGL DC

VGL

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14

tOEV

tOEH tDIS1 tSTH

(HSY)

OEH

STH1(2)

Note : The falling edge of OEV should be synchronized with the falling edge of OEH

Fig. 8-3 (b) Detail horizontal timing

tDRGB

V(R,G,B)

tDIS2 tCKV

XOE

CPV

trCOM

tfCOM

10%

90%90%

10%

50%

tDCOM

VCOM

VGL VGL DC VGL AC

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15

tS1V tH2V

tCKV

IO1(2)

CPV

Fig. 8-4 Vertical shift clock timing

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16

Vertical timing (From up to down)

Display on panel first line

V(R,G,B)

(HSY)

(VSY)

DIO1

COM (Odd field)

VCOM (Even field)

Fig. 8-5 (a) Vertical timing (From Up to Down)

tsv

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17

Vertical timing (From down to up)

Display on panel first line

V(R,G,B)

(HSY)

(VSY)

DIO2

COM (Odd field)

VCOM (Even field)

Fig. 8-5 (b) Vertical timing (From Down to Up)

tsv

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18

9. Power On Sequence

1) 10ms≦T1<T2

2) 0ms<T3≦T4≦10ms

10. Optical Characteristics

10-1) Specification:

Ta = 25℃

Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks

Horizontal θ21, θ22 45 50 --- deg Note 10-1

Vertical θ11 CR≧10 30 35 --- deg Note 10-1

Viewing

Angle θ12 10 15 --- deg Note 10-1

Contrast Ratio CR At optimized

Viewing angle

200 350

--- Note 10-2

Rise Tr

θ=0° --- 15 30 ms Note 10-4

Response time Fall Tf --- 30 50 ms

Transmission Ratio 8.0 8.5 --- %

Uniformity U 70 80 --- % Note 10-5

Brightness 350 400 ---

cd/㎡ Note 10-3

x θ=0° 0.270 0.300 0.330 Note 10-3White

Chromaticity y θ=0° 0.320 0.350 0.380

Lamp Life Time +25℃ --- 30,000 --- Hr

(0V)

OFF OFF

Logic signal

RGB-Video signal

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19

Note 10-1 : The definitions of viewing angles

Luminance when Testing point is White

Note 10-2 : CR ＝ Luminance when Testing point is Black

(Testing configuration see 10-2 )

Contrast Ratio is measured in optimum common electrode voltage.

Note 10-3 : Topcon BM-7(fast) luminance meter 2°field of view is used in the testing (after

20~30 minutes operation).

Lamp Current 6mA

Note 10-4 : The definition of response time :

100%

90%

10%

White White

Brightness

Black

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20

Note 10-5: The uniformity of LCD is defined as

The Minimum Brightness of the 9 testing Points

U =

The Maximum Brightness of the 9 testing Points

Luminance meter : BM-5A or BM-7 fast(TOPCON)

Measurement distance : 500 mm +/- 50 mm

Ambient illumination : < 1 Lux

Measuring direction : Perpendicular to the surface of module

The test pattern is white (Gray Level 63).

25% 50% 75%

25%

50%

75%

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21

10-2) Testing configuration

y LCD Display

y R, G, B Waveform of Pattern A at Testing Point

y R, G, B Waveform of Pattern B at Testing Point

500mm

BM-7(fast)

LCD

Backlight

R,G,B signal

Pattern

generator

input

Pattern A Pattern B

Testing Point Testing Point

63.6μs63.6μs

Caution: 1. Environmental illumination≦1 lux

2. Before test CR, Vcom voltage must

be adjusted carefully to get the best

CR.

Vcom

RGB

waveform

RGB

waveform

Vcom

Vb=5.0V +/- 0.2V

Vw=1.3V +/- 0.2V

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22

11. Handling Cautions

11-1) Mounting of module

a) Please power off the module when you connect the input/output connector.

b) Please connect the ground pattern of the inverter circuit surely. If the connection

is not perfect, some following problems may happen possibly.

1. The noise from the backlight unit will increase.

2. The output from inverter circuit will be unstable.

3. In some cases a part of module will heat.

c) Polarizer which is made of soft material and susceptible to flaw must be

handled carefully.

d) Protective film (Laminator) is applied on surface to protect it against scratches

and dirts. It is recommended to peel off the laminator before use and taking

care of static electricity.

11-2) Precautions in mounting

a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,

wipe it with soft dry cloth.

b) Wipe off water drops or finger grease immediately. Long contact with water may

cause discoloration or spots.

c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface.

Please handle with care.

d) Since CMOS LSI is used in the module. So take care of static electricity and

earth yourself when handling.

11-3) Adjusting module

a) Adjusting volumes on the rear face of the module have been set optimally before shipment.

b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications

described may not be satisfied.

11-4) Others

a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many

hours.

b) Store the module at a room temperature place.

c) The voltage of beginning electric discharge may over the normal voltage because of leakage

current from approach conductor by to draw lump read lead line around.

d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.

Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it

out immediately with soap.

e) Observe all other precautionary requirements in handling general electronic components.

f) Please adjust the voltage of common electrode as material of attachment by 1 module.

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23

12. Reliability Test

No Test Item Test Condition

1 High Temperature Storage Test Ta = +80℃, 240 hrs

2 Low Temperature Storage Test Ta = -30℃, 240 hrs

3 High Temperature Operation Test Ta = +70℃, 240 hrs

4 Low Temperature Operation Test Ta = -20℃, 240 hrs

5 High Temperature & High Humidity

Operation Test Ta = +60℃, 90%RH, 240 hrs

6 Thermal Cycling Test

(non-operating)

-25℃ → +70℃, 200 Cycles

30 min 30 min

7 Vibration Test

(non-operating)

Frequency：10 ~ 55 HZ

Amplitude：1.5 mm

Sweep time: 11 mins

Test Period : 6 Cycles for each direction of X, Y, Z

8 Shock Test

(non-operating)

100G, 6ms

Direction : ±X, ±Y, ±Z

Cycle : 3 times

9 Electrostatic Discharge Test

(non-operating)

200pF, 0Ω

±200V

1 time / each terminal

Ta: ambient temperature

[Criteria]

Under the display quality test conditions with normal operation state, there should be no change which

may affect practical display function.

13. Indication of Lot Number Label

1. Indicated contents of the label

Lot number

Module number

Contents of lot number : 1st~3rd—The OEM product

5th—Production year : 1999⇒9, 2000⇒A, 2001⇒B……..

6th—Production month : 1, 2, 3,….9, A, B, C

7th~8th—Production size : 5” ⇒50

9th~10th— Serial numbers : 01~99

OOO-OOOOOO

PA050XS1XXS

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24

14. Block Diagram

LCD Panel

H Driver

(Source)

Back-light

30 PIN Input

Inverter

V Driver

(Gate)

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25

15. Packing

PA050XS1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:26

Revision History

Rev. Issued Date Revised Contents

0.1 Jan. 20 , 2003 NEW

1.0 Mar. 19, 2003 Page 3 : Update Mechanical Specifications(Weight)

Page 8 : Modify Current Consumption

Page 23 : Modify Reliability Test(HTHH Condition)

Page 25 : Add Packing

1.1 Jul. 29 , 2003 Page 8 : Modify Electrical Characteristics

Page 9 : Modify Current Consumption

1.2 Aug. 29 , 2003 Page 4 : Modify Mechanical Drawing of TFT-LCD Module

1.3 Sep. 19, 2003 Page 9: Modify Current Consumption & Power Consumption

1.4 Nov. 24, 2003 Page 7: Add U/D and DIO1/2 Definition

Page 20: Modify Optical Characteristics

(Contrast Ratio Min. from 110 to 200 & Typ. from 150 to 350)

1.5 Jun. 28, 2004 Page 10: Modify Backlight Connector Pitch from 4 to 3.5 mm

1.6 Jul. 15, 2004 Page 4: Update Mechanical Drawing of TFT-LCD Module (Add

Ground Wire)