For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
1
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
General Description
Features
Functional Diagram
Single Supply: Vcc = +3 to +5V
Low Noise Figure: 1.3 dB
High Output IP3: +21 dBm
No External Matching Required
External Filter Access
3x3 mm Leadless SMT Package
Electrical Specications, TA = +25°C*
Typical Applications
The HMC548LP3 / HMC548LP3E is ideal for:
• Automotive Telematics
• GPS Antenna Modules / Boosters
• Location Based Portables
• Satellite Navigation
The HMC548LP3 & HMC548LP3E are comprised of
two internally matched SiGe HBT MMIC low noise
amplier stages housed in 3x3 mm leadless SMT
packages. The unique topology of the HMC548LP3
& HMC548LP3E provides interstage access allowing
the designer to place a bandpass lter between the
two amplier stages. This ltering approach enables
the receiver to reject nearby blocking signals such
as those emitted from cellular and 3G hand-helds,
without incurring the noise gure degradation
associated with a high rejection pre-lter. When
combined with the appropriate interstage bandpass
lter, this LNA can be used as a receiver pre-amplier
in various applications from 1.2 to 3 GHz. Evaluation
boards are available with or without a GPS L1
(1575 MHz) band pass lter.
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 1575 MHz
Vcc +3 +5 V
Gain 20 23 23 26 dB
Gain Variation Over Temperature 0.04 0.05 0.04 0.05 dB/°C
Noise Figure 1.6 1.9 1.3 1.6 dB
Input Return Loss 8 8 dB
Output Return Loss 14 16 dB
Output 1 dB Compression (P1dB) 811 dBm
Saturated Output Power (Psat) 10.5 12 dBm
Output Third Order Intercept (IP3) 13 21 dBm
Supply Current (Icc) 10 15 21 30 mA
* All measurements include external 1.57 - 1.6 GHz (GPS L1) band pass lter connected between pin 4 & pin 9.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
2
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Gain & Return Loss [1] Gain vs. Temperature [1]
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
1.55 1.56 1.57 1.58 1.59
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
Input Return Loss vs. Temperature [1] Output Return Loss vs. Temperature [1]
Reverse Isolation vs. Temperature [1] Noise Figure vs. Temperature [1]
-25
-20
-15
-10
-5
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-10
-8
-6
-4
-2
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-70
-60
-50
-40
-30
-20
-10
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
12
16
20
24
28
32
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
[1] Measurement includes external 1.57 - 1.6 GHz (GPS L1) band pass lter connected between pin 4 and pin 9. Vcc = +5V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
3
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
P1dB vs. Temperature [1] Psat vs. Temperature [1]
Output IP3 vs. Temperature [1] Broadband Gain & Return Loss [2]
Gain vs. Temperature [2] Input Return Loss vs. Temperature [2]
-20
-15
-10
-5
0
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-20
0
20
40
0.5 1 1.5 2 2.5 3 3.5 4
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
GAIN (dB)
FREQUENCY (GHz)
10
12
14
16
18
20
22
24
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25 C
+85 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
0
4
8
12
16
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25 C
+85 C
-40 C
PSAT (dBm)
FREQUENCY (GHz)
0
4
8
12
16
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
[1] Measurement includes external 1.57 - 1.6 GHz (GPS L1) band pass lter connected between pin 4 and pin 9. Vcc = +5V.
[2] Measurement includes external 50 Ohm line between pin 4 and pin 9. Vcc = +5V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
4
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Output Return Loss vs. Temperature [2] Reverse Isolation vs. Temperature [2]
Noise Figure vs. Temperature [2] P1dB vs. Temperature [2]
Psat vs. Temperature [2]
0
1
2
3
4
5
1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
0
5
10
15
20
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
PSAT (dBm)
FREQUENCY (GHz)
0
5
10
15
20
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
-70
-60
-50
-40
-30
-20
-10
0
10
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
-40
-30
-20
-10
0
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
Output IP3 vs. Temperature [2]
0
5
10
15
20
25
30
0.5 1 1.5 2 2.5 3 3.5 4
+25 C
+85 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
[2] Measurement includes external 50 Ohm line between pin 4 and pin 9. Vcc = +5V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
5
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Small Signal Parameters Input Stage [3] Small Signal Parameters Output Stage [3]
P1dB Individual Stages [3] Noise Figure Individual Stages [3]
0
1
2
3
4
0.5 1 1.5 2 2.5 3 3.5 4
Input Stage
Output Stage
NOISE FIGURE (dB)
FREQUENCY (GHz)
-5
-1
3
7
11
15
0.5 1 1.5 2 2.5 3 3.5 4
P1dB Input Stage
P1dB Output Stage
P1dB (dBm)
FREQUENCY (GHz)
-40
-30
-20
-10
0
10
20
0.5 1 1.5 2 2.5 3 3.5 4
S21
S11
S22
S12
RESPONSE (dB)
FREQUENCY (GHz)
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
0.5 1 1.5 2 2.5 3 3.5 4
S21
S11
S22
S12
RESPONSE (dB)
FREQUENCY (GHz)
[3] Vcc = +5V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
6
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Gain & Return Loss [4] Gain vs. Temperature [4]
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
1.55 1.56 1.57 1.58 1.59
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
Input Return Loss vs. Temperature [4] Output Return Loss vs. Temperature [4]
Reverse Isolation vs. Temperature [4] Noise Figure vs. Temperature [4]
-20
-15
-10
-5
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-12
-10
-8
-6
-4
-2
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-70
-60
-50
-40
-30
-20
-10
0
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
10
14
18
22
26
30
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
[4] Measurement includes external 1.57 - 1.6 GHz (GPS L1) band pass lter connected between pin 4 and pin 9. Vcc = +3V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vcc) +7.0 Vdc
RF Input Power (RFIN) -5 dBm
Junction Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 14 mW/°C above 85 °C) 0.942 W
Thermal Resistance
(junction to ground paddle) 69 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1B
Typical Supply Current vs. Vcc
Vcc (Vdc) Icc (mA)
3.0 10
4.5 17
5.0 21
5.5 24
P1dB vs. Temperature [4] Psat vs. Temperature [4]
Output IP3 vs. Temperature [4]
0
5
10
15
20
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
0
5
10
15
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
0
5
10
15
1.56 1.565 1.57 1.575 1.58 1.585 1.59
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
[4] Measurement includes external 1.57 - 1.6 GHz (GPS L1) band pass lter connected between pin 4 and pin 9. Vcc = +3V.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
8
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC548LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] 548
XXXX
HMC548LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 548
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Pin Number Function Description Interface Schematic
1RFIN1
This pin is DC coupled and matched to
50 Ohms from 1.2 to 2.0 GHz.
An off chip blocking capacitor is required.
2, 3, 5 - 8,10,
11, 13, 14, 16 GND These pins and package ground paddle
must be connected to RF/DC ground.
4RFOUT1 This pin is AC coupled and matched to
50 Ohms from 1.2 - 2 GHz.
9RFIN2
This pin is DC coupled and matched to
50 Ohms from 1.2 to 2.0 GHz.
An off chip blocking capacitor is required.
12 RFOUT2 This pin is AC coupled and matched to
50 Ohms from 1.2 - 2 GHz.
15 Vcc Power supply voltage for the amplier. External bypass
capacitors of 1,000pF and 18,000 pF are required.
Pin Descriptions
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
9
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
1575 MHz Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed ground paddle should be con-
nected directly to the ground plane similar to that
shown above. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
List of Material for Evaluation PCB 114254 [1]
Item Description
J1, J2 PCB Mount SMA Connector
J3, J4 DC Pin
C1, C2 150 pF Capacitor, 0402 Pkg.
C3 1000 pF Capacitor, 0402 Pkg.
C4 18,000 pF Capacitor, 0402 Pkg.
U1 HMC548LP3 / HMC548LP3E
Amplier
U2 Filter, Amotech AMOBP1575P02-A1
2.5 dB loss @ 1575 MHz
PCB [2] 110980 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Application Circuit
Component Value
C1, C2 150 pF
C3 1,000 pF
C4 18,000 pF
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
10
HMC548LP3 / 548LP3E
v03.1011
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
Wideband (No Filter) Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed ground paddle should be con-
nected directly to the ground plane similar to that
shown above. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
List of Material for Evaluation PCB 113979 [1]
Item Description
J1, J2 PCB Mount SMA Connector
J3, J4 DC Pin
C1, C2 150 pF Capacitor, 0402 Pkg.
C3 1000 pF Capacitor, 0402 Pkg.
C4 18,000 pF Capacitor, 0402 Pkg.
U1 HMC548LP3 / HMC548LP3E
Amplier
PCB [2] 113977 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
