LFXP2-17E-6FN484C - Lattice Semiconductor

FPGA • CPLD • MIXED SIGNAL • INTELLECTUAL PROPERTY • DEVELOPMENT KITS • DESIGN TOOLS

PRODUCT SELECTOR GUIDE

AUGUST 2012

Page 2

CONTENTS

■ Advanced Packaging ............................................................4

■ FPGA Products ......................................................................6

■ CPLD Products ......................................................................8

■ Mixed Signal Products .......................................................... 8

■ Intellectual Property and Reference Designs ...................10

■ Development Kits and Evaluation Boards ........................14

■ Programming Hardware......................................................18

■ FPGA and CPLD Design Software .....................................19

■ PAC-Designer® Design Software ........................................ 19

Page 3

Affordable Innovation

Lattice Semiconductor is committed to delivering value through innovative low cost, low power

solutions. We’re innovating every day to drive down costs and deliver greater value. From

cost sensitive consumer electronics to leading edge communications equipment, designers

are using Lattice products in a growing number of applications. We’ve shipped over a billion

devices to customers worldwide and we understand that we must deliver cost effective

solutions and excellent service in order to succeed.

FPGA, PLD and Mixed Signal Products

Lattice FPGA (Field Programmable Gate Array) solutions offer unique features, low power,

and excellent value for FPGA designs. We are also the leading supplier of low-density CMOS

PLDs, and our CPLD and SPLD solutions deliver an optimal t for a variety of PLD design

challenges.

Our Platform Manager™, Power Manager II and ispClock™ mixed signal product families

feature a combination of programmable logic and programmable analog circuitry that allows

system designers to reduce system cost and design time. These innovative products provide a

fast and easy solution for integrating a wide range of power and clock management functions

within a single integrated circuit. These products can replace numerous discrete components,

reducing cost and conserving board space, while providing users with additional design

exibility and time-to-market benets.

Software and Intellectual Property

Our Lattice Diamond® development tool suite, iCEcube2™ design software, PAC-Designer

software, and IP core program allow design engineers to easily customize our devices for their

unique system requirements.

Lattice Diamond software tools enable users to synthesize a design, perform analysis, debug,

and download a logic conguration to our FPGA devices, while iCEcube2 software supports

our iCE40 family of FGPAs. PAC-Designer software is used in the design of our mixed signal

products.

Our IP core program, LatticeCORE™, provides pre-tested, reusable functions, allowing

designers to focus on their unique system architectures. These IP cores provide industry-

standard functions including PCI Express, DDR, Ethernet, CPRI, Serial RapidIO 2.1, SPI4,

and embedded microprocessors. In addition, a number of independent IP providers have

teamed with Lattice to offer additional high quality, reusable IP cores. Partners are selected for

their industry leadership, high development standards, and commitment to customer support.

For more information go to LATTICESEMI.COM

Page 4

Organic Flip Chip BGA

Fine Pitch BGA

1704-Ball

Organic fcBGA

42.5 x 42.5 mm

3.25 mm height

1.00 mm pitch

1152-Ball

Organic fcBGA

35 x 35 mm

3.50 mm height

1.00 mm pitch

1020-Ball

Organic fcBGA

Revision 2

33 x 33 mm

3.25 mm height

1.00 mm pitch

1152-Ball fpBGA

1156-Ball fpBGA

35 x 35 mm

2.60 mm height

1.00 mm pitch

868-Ball fpBGA

900-Ball fpBGA

31 x 31 mm

2.60 mm height

1.00 mm pitch

648-Ball fpBGA

672-Ball fpBGA

27 x 27 mm

2.60 mm height

1.00 mm pitch

484-Ball fpBGA

23 x 23 mm

2.60 mm height

1.00 mm pitch

324-Ball ftBGA

19 x 19 mm

1.70 mm height

1.00 mm pitch

256-Ball ftBGA

17 x 17 mm

Option 1: 1.55 mm height

Option 2: 2.10 mm height

Option 3: 1.70 mm height

1.00 mm pitch

256-Ball caBGA

14 x 14 mm

1.70 mm height

0.80 mm pitch

332-Ball caBGA

17 x 17 mm

2.00 mm height

0.80 mm pitch

208-Ball ftBGA

17 x 17 mm

1.55 mm height

1.00 mm pitch

256-Ball fpBGA

17 x 17 mm

2.10 mm height

1.00 mm pitch

Fine Pitch BGA

Chip Array BGA

Advanced Packaging

Note: Packages shown actual size. Height speciﬁcation is max.

Page 5

208-Pin PQFP

28 x 28 mm (body)

4.10 mm height

0.50 mm pitch

176-Pin TQFP

24 x 24 mm (body)

1.60 mm height

0.50 mm pitch

144-Pin TQFP

20 x 20 mm (body)

1.60 mm height

0.50 mm pitch

100-Pin TQFP

128-Pin TQFP

14 x 14 mm (body)

1.6 mm height

0.50 mm pitch (100 TQFP)

0.40 mm pitch (128 TQFP)

44-Pin TQFP

10 x 10 mm (body)

1.20 mm height

1.60 mm height

0.80 mm pitch

48-Pin TQFP

7 x 7 mm (body)

1.20 mm height

1.60 mm height

0.50 mm pitch

TQFP/PQFP

64-Pin QFNS

9 x 9 mm

1.00 mm height

0.50 mm pitch

100-Ball csBGA

132-Ball csBGA

8 x 8 mm

1.35 mm height

0.50 mm pitch

284-Ball csBGA

12 x 12 mm

1.00 mm height

0.50 mm pitch

328-Ball csBGA

10 x 10 mm

1.50 mm height

0.50 mm pitch

132-Ball ucBGA

6 x 6 mm

1.00 mm height

0.40 mm pitch

25-Ball WLCSP

2.5 x 2.5 mm

0.62 mm height

0.40 mm pitch

84-Pin QFNS

7 x 7 mm

1.00 mm height

0.50 mm pitch

48-Pin QFNS

7 x 7 mm

1.00 mm height

0.50 mm pitch

144-Ball csBGA

7 x 7 mm

1.10 mm height

0.50 mm pitch

64-Ball ucBGA

4 x 4 mm

1.00 mm height

0.40 mm pitch

32-Pin QFNS

5 x 5 mm

1.00 mm height

0.50 mm pitch

32-Pin QFN

5 x 5 mm

0.60 mm height

0.50 mm pitch

56-Ball csBGA

6 x 6 mm

1.35 mm height

0.50 mm pitch

81-Ball csBGA

5 x 5 mm

1.00 mm height

0.50 mm pitch

225-Ball ucBGA

7 x 7 mm

1.00 mm height

0.40 mm pitch

24-Pin QFNS

4 x 4 mm

1.00 mm height

0.50 mm pitch

64-Ball csBGA

5 x 5 mm

1.10 mm height

0.50 mm pitch

121-Ball csBGA

6 x 6 mm

1.00 mm height

0.50 mm pitch

121-Ball ucBGA

5 x 5 mm

1.00 mm height

0.40 mm pitch

81-Ball ucBGA

4 x 4 mm

1.00 mm height

0.40 mm pitch

49-Ball ucBGA

3 x 3 mm

1.00 mm height

0.40 mm pitch

36-Ball ucBGA

2.5 x 2.5 mm

1.00 mm height

0.40 mm pitch

QFNS / QFN

Chip Scale BGA

Ultra Chip Scale BGA

Wafer Level Chip Scale

Note: Packages shown actual size. Height speciﬁcation is max.

Page 6

Product Family Device LUTs

EBR SRAM

Distrib.

RAM UFM sysDSP™ Blocks

PLL +

DLL

DDR

Support

Conﬁguration

Memory

Dual

Boot2

Bit-

stream

Encryp-

tion

Embedded

Function Blocks Process

Core Vcc Temperature Number of I/Os

# of

Blocks Kbits Kbits Kbits

18x18

Blocks

Multi-

pliers 1.2V

1.8 -

3.3V

2.5 -

3.3V C I

AEC-

Q100

TQFP PQFP WLCSP1QFN ucBGA csBGA caBGA ftBGA fpBGA

100 144 208 25 32 84 36 49 64 81 121 225 81 100 121 132 256 332 256 324 484 672

LatticeXP2™

LFXP2-5E 5K 9 166 10 3 12 2+0

DDR/2 400 Internal Flash P P 90nm P P P

P100 146 86 172

LFXP2-8E 8K 12 221 18 4 16

201

LFXP2-17E 17K 15 276 35 5 20

4+0

358

LFXP2-30E 29K 21 387 56 7 28 363 472

LFXP2-40E 40K 48 885 83 8 32 540

iCE40™

iCE40LP384 384

Internal NVCM P40nm P P P

21 25 37 55

iCE40LP640 640 8 32 1 25 35 63

iCE40LP1K 1280 16 64 1 67 25 35 63 95 62 92

iCE40LP4K 3520 20 80 2 63 93 167

iCE40LP8K 7680 32 128 2 93 178

iCE40HX640 640 8 32 1 67

iCE40HX1K 1280 16 64 1 72 96 95

iCE40HX4K 3520 20 80 2 107 95

iCE40HX8K 7680 32 128 2 178 95 206 224

iCE40HX16K 15296 52 832 2 224 264

MachXO2™

LCMXO2-256 256 0 0 2 0

Internal Flash P I2C (2)

SPI (1)

Timer (1)

65nm ZE &

HE HC P P

56 22 45 56

LCMXO2-640 640 2 18 5 24 79 80

LCMXO2-640U 640 7 64 5 64 1+2

DDR 266

DDR2 266

LPDDR266

108

LCMXO2-1200 1280 7 64 10 64 1+2 80 108 19 105

LCMXO2-1200U 1280 8 74 10 80 1+2 207

LCMXO2-2000 2112 8 74 16 80 1+2 80 112 105 207 207

LCMXO2-2000U 2112 10 92 16 96 2+2 279

LCMXO2-4000 4320 10 92 34 96 2+2 115 105 207 275 207 279

LCMXO2-7000 6864 26 240 54 256 2+2 115 207 279 207 335

MachXO™

LCMXO256E 256 2.0

Internal Flash 130nm

P P

78 78

LCMXO256C P

LCMXO640E 640 6.1 P74

113

101

159 159

LCMXO640C P

LCMXO1200E 1200 1 9.2 6.4 1+0 P

73 211 211

LCMXO1200C P

LCMXO2280E 2280 3 27.6 7.7 2+0 P P 271

LCMXO2280C P

1) Contact your Lattice sales representative for the support of 32 QFN packages for MachXO2. 2) Dual Boot supported with external boot Flash.

FPGA Products

Volatile FPGA Families

Non-volatile FPGA Families

Product Family Device LUTs

EBR SRAM Distrib.

RAM sysDSP™ Blocks SERDES

PLL +

DLL

DDR

Support

Boot

Flash Dual Boot

Bit-

stream

Encryp-

tion

Embedded

Function Blocks Process

Core Vcc Temp.

Power1Speed

Grade

Number of I/Os / SERDES

# of

Blocks Kbits Kbits 18x18

Blocks

Multi-

pliers 1.2V 1.8 -

3.3V

2.5 -

3.3V

Max.

Chan.

Max.

Rate C I TQFP PQFP csBGA ftBGA fpBGA fcBGA Organic fcBGA

144 208 328 256 256 484 648 672 868 900 1152 1156 676 900 1152 1020 1152 1704

LatticeECP3™

LFE3-17EA 17K 38 700 36 12 24 4

3.2G

2+2

DDR3 800

DDR2 533

DDR 400

External P P 65nm P P P S, L

6, 7, 8 116/2 133/4 222/4

LFE3-35EA 33K 72 1,327 68 32 64 4+2

6, 7, 8, 9 295/4

310/4

LFE3-70EA 67K 240 4,420 145 64 128 12 10+2 380/8 490/12

LFE3-95EA 92K 240 4,420 188 64 128

LFE3-150EA 149K 372 6,850 303 160 320 16 586/16

LatticeECP2/M

LFE2M20E/SE 19K 66 1,217 41 6 24 4

3.2G 8+2 DDR2 533

DDR 400 External PSE only 90nm P P P 6, 7, 8

140/4 304/4

LFE2M35E/SE 34K 114 2,101 71 8 32 303/4 410/4

LFE2M50E/SE 48K 225 4,147 101 22 88 8 270/4 372/8 410/8

LFE2M70E/SE 67K 246 4,534 145 24 96 16 416/16 436/16

LFE2M100E/SE 95K 288 5,308 202 42 168 520/16

LFE2-6E/SE 6K 3 55 12 3 12

2+2 DDR2 533

DDR 400 External PSE only 90nm P P P 6, 7, 8

90 190

LFE2-12E/SE 12K 12 221 24 6 24 93 131 193 297

LFE2-20E/SE 21K 15 276 42 7 28 331 402

LFE2-35E/SE 32K 18 332 64 8 32 450

LFE2-50E/SE 48K 21 387 96 18 72 4+2 339 500

LFE2-70E/SE 68K 60 1,032 136 22 88 6+2 583

LatticeSC/M

LFSC3GA15E 15K 56 1,030 240 8

3.8G 8+12

DDR2 667

DDR 400 External 90nm P P P 6, 7, 8

139/4 300/8

LFSCM3GA15EP1 4

LFSC3GA25E 25K 104 1,920 410

378/8 476/16

LFSCM3GA25EP1 6

LFSC3GA40E 40K 216 3,980 650 562/16 604/16

LFSCM3GA40EP1 10

LFSC3GA80E 80K 308 5,680 1,280

32 660/16

904/32

LFSCM3GA80EP1 10

LFSC3GA115E 115K 424 7,800 1,840 942/32

LFSCM3GA115EP1 12

1) S = Standard Power; L = Low Power.

NEW

Product Family Device LUTs

EBR SRAM

Distrib.

RAM UFM sysDSP™ Blocks

PLL +

DLL

DDR

Support

Conﬁguration

Memory

Dual

Boot2

Bit-

stream

Encryp-

tion

Embedded

Function Blocks Process

Core Vcc Temperature Number of I/Os

# of

Blocks Kbits Kbits Kbits

18x18

Blocks

Multi-

pliers 1.2V

1.8 -

3.3V

2.5 -

3.3V C I

AEC-

Q100

TQFP PQFP WLCSP1QFN ucBGA csBGA caBGA ftBGA fpBGA

100 144 208 25 32 84 36 49 64 81 121 225 81 100 121 132 256 332 256 324 484 672

LatticeXP2™

LFXP2-5E 5K 9 166 10 3 12 2+0

DDR/2 400 Internal Flash P P 90nm P P P

P100 146 86 172

LFXP2-8E 8K 12 221 18 4 16

201

LFXP2-17E 17K 15 276 35 5 20

4+0

358

LFXP2-30E 29K 21 387 56 7 28 363 472

LFXP2-40E 40K 48 885 83 8 32 540

iCE40™

iCE40LP384 384

Internal NVCM P40nm P P P

21 25 37 55

iCE40LP640 640 8 32 1 25 35 63

iCE40LP1K 1280 16 64 1 67 25 35 63 95 62 92

iCE40LP4K 3520 20 80 2 63 93 167

iCE40LP8K 7680 32 128 2 93 178

iCE40HX640 640 8 32 1 67

iCE40HX1K 1280 16 64 1 72 96 95

iCE40HX4K 3520 20 80 2 107 95

iCE40HX8K 7680 32 128 2 178 95 206 224

iCE40HX16K 15296 52 832 2 224 264

MachXO2™

LCMXO2-256 256 0 0 2 0

Internal Flash P I2C (2)

SPI (1)

Timer (1)

65nm ZE &

HE HC P P

56 22 45 56

LCMXO2-640 640 2 18 5 24 79 80

LCMXO2-640U 640 7 64 5 64 1+2

DDR 266

DDR2 266

LPDDR266

108

LCMXO2-1200 1280 7 64 10 64 1+2 80 108 19 105

LCMXO2-1200U 1280 8 74 10 80 1+2 207

LCMXO2-2000 2112 8 74 16 80 1+2 80 112 105 207 207

LCMXO2-2000U 2112 10 92 16 96 2+2 279

LCMXO2-4000 4320 10 92 34 96 2+2 115 105 207 275 207 279

LCMXO2-7000 6864 26 240 54 256 2+2 115 207 279 207 335

MachXO™

LCMXO256E 256 2.0

Internal Flash 130nm

P P

78 78

LCMXO256C P

LCMXO640E 640 6.1 P74

113

101

159 159

LCMXO640C P

LCMXO1200E 1200 1 9.2 6.4 1+0 P

73 211 211

LCMXO1200C P

LCMXO2280E 2280 3 27.6 7.7 2+0 P P 271

LCMXO2280C P

1) Contact your Lattice sales representative for the support of 32 QFN packages for MachXO2. 2) Dual Boot supported with external boot Flash.

Page 7

Product Family Device LUTs

EBR SRAM Distrib.

RAM sysDSP™ Blocks SERDES

PLL +

DLL

DDR

Support

Boot

Flash Dual Boot

Bit-

stream

Encryp-

tion

Embedded

Function Blocks Process

Core Vcc Temp.

Power1Speed

Grade

Number of I/Os / SERDES

# of

Blocks Kbits Kbits 18x18

Blocks

Multi-

pliers 1.2V 1.8 -

3.3V

2.5 -

3.3V

Max.

Chan.

Max.

Rate C I TQFP PQFP csBGA ftBGA fpBGA fcBGA Organic fcBGA

144 208 328 256 256 484 648 672 868 900 1152 1156 676 900 1152 1020 1152 1704

LatticeECP3™

LFE3-17EA 17K 38 700 36 12 24 4

3.2G

2+2

DDR3 800

DDR2 533

DDR 400

External P P 65nm P P P S, L

6, 7, 8 116/2 133/4 222/4

LFE3-35EA 33K 72 1,327 68 32 64 4+2

6, 7, 8, 9 295/4

310/4

LFE3-70EA 67K 240 4,420 145 64 128 12 10+2 380/8 490/12

LFE3-95EA 92K 240 4,420 188 64 128

LFE3-150EA 149K 372 6,850 303 160 320 16 586/16

LatticeECP2/M

LFE2M20E/SE 19K 66 1,217 41 6 24 4

3.2G 8+2 DDR2 533

DDR 400 External PSE only 90nm P P P 6, 7, 8

140/4 304/4

LFE2M35E/SE 34K 114 2,101 71 8 32 303/4 410/4

LFE2M50E/SE 48K 225 4,147 101 22 88 8 270/4 372/8 410/8

LFE2M70E/SE 67K 246 4,534 145 24 96 16 416/16 436/16

LFE2M100E/SE 95K 288 5,308 202 42 168 520/16

LFE2-6E/SE 6K 3 55 12 3 12

2+2 DDR2 533

DDR 400 External PSE only 90nm P P P 6, 7, 8

90 190

LFE2-12E/SE 12K 12 221 24 6 24 93 131 193 297

LFE2-20E/SE 21K 15 276 42 7 28 331 402

LFE2-35E/SE 32K 18 332 64 8 32 450

LFE2-50E/SE 48K 21 387 96 18 72 4+2 339 500

LFE2-70E/SE 68K 60 1,032 136 22 88 6+2 583

LatticeSC/M

LFSC3GA15E 15K 56 1,030 240 8

3.8G 8+12

DDR2 667

DDR 400 External 90nm P P P 6, 7, 8

139/4 300/8

LFSCM3GA15EP1 4

LFSC3GA25E 25K 104 1,920 410

378/8 476/16

LFSCM3GA25EP1 6

LFSC3GA40E 40K 216 3,980 650 562/16 604/16

LFSCM3GA40EP1 10

LFSC3GA80E 80K 308 5,680 1,280

32 660/16

904/32

LFSCM3GA80EP1 10

LFSC3GA115E 115K 424 7,800 1,840 942/32

LFSCM3GA115EP1 12

1) S = Standard Power; L = Low Power.

Page 8

ispClock Products

CPLD Products

1) Pb-free only.

ispClock5400D ispClock5600A ispClock5300S

Feature 5406D 5410D 5610A 5620A 5304S 5308S 5312S 5316S 5320S

Outputs 6 10 10 20 4 8 12 16 20

Input Operating Frequency Range 50 to 400MHz 8 to 400MHz 8 to 267MHz

Output Operating Frequency Range 50 to 400MHz 4 to 400MHz 5 to 267MHz

VCO Operation 400 to 800MHz 320 to 800MHz 160 to 400MHz

Spread Spectrum Compatibility Yes Yes Yes

Single-Ended Fan-out Buffer Interfaces None LVTTL, LVCMOS, HSTL, eHSTL, SSTL LVTTL, LVCMOS, HSTL, eHSTL, SSTL

Single-Ended Clock Reference and

Feedback Interfaces LVCMOS LVTTL, LVCMOS, SSTL, HSTL LVTTL, LVCMOS, HSTL, eHSTL, SSTL

Differential Fan-out Buffer Interfaces LVDS, LVPECL, HSTL, SSTL,

HCSL, MLVDS SSTL, HSTL, LVDS, LVPECL None

Differential Clock Reference and

Feedback Interfaces

LVDS, LVPECL, HSTL, SSTL,

HCSL, MLVDS HSTL, SSTL, LVDS, LVPECL LVDS, LVPECL, HSTL, SSTL

Type of PLL Feedback Internal/External Internal/External External

M, N Dividers None Count from 1 to 40 None

Number of V Dividers 4 5 3

V Divider Count Range 2 to 16 (in powers of 2) 2 to 80 (in steps of 2) 1 to 32 (in powers of 2)

Maximum Cycle-Cycle Jitter 29ps (peak-peak) 70ps (peak-peak) 70ps (peak-peak)

Maximum Period Jitter (RMS) 2.5ps 12ps 12ps

Maximum Phase Jitter (RMS) 6ps Typ. 50ps 50ps

Maximum Static Phase Offset -5ps to 95ps -100ps to 200ps -40ps to 100ps

Frequencies Generated 4 5 3

Programmable Phase Skew 156ps to 12ns 156ps to 12ns 156ps to 5ns

Programmable Time Skew 0 to 288ps None None

Fan-out Buffer Mode Yes No Yes

Programmable Termination None 40 to 70Ω & 20Ω Setting 40 to 70Ω & 20Ω Setting

ispMACH® 4000ZE

Parameter 4032ZE 4064ZE 4128ZE 4256ZE

Macrocells 32 64 128 256

Embedded Oscillator PPPP

tPD (ns) 4.4 4.7 5.8 5.8

tCO (ns) 3.0 3.2 3.8 3.8

tS (ns) 2.2 2.5 2.9 2.9

fMAX (MHz) 260 241 200 200

VCC (Volts) 1.8 1.8 1.8 1.8

I/O Standard Support 1.8 2.5 3.3

Typ. Standby

Current 10 µA 11 µA 12 µA 13 µA

Package I/Os + Inputs1

Bare Die PPPP

48-pin TQFP 32 + 4 32 + 4

64-ball csBGA 32 + 4 48 + 4

64-ball ucBGA 48 + 4

100-pin TQFP 64 + 10 64 + 10 64 + 10

132-ball ucBGA 96 + 4

144-ball csBGA 64 + 10 96 + 4 108 + 14

144-pin TQFP 96 + 4 96 + 4

Page 9

Platform and Power Management Products

Integrated Platform and Power Management Functions (Shown in ICs)

Platform Manager and Power Manager II Applications Cross Reference

Platform Manager and Power Manager II Device Selector Guide

* ispPAC-POWR1014A Only

Power Manager II Platform Manager

Parameter POWR6AT6 ProcessorPM™ -

POWR605 POWR607 POWR1014/A POWR1220AT8 LPTM10-1247 LPTM10-12107

Precision Voltage Monitors (Typ.) 6 (0.2%) 6 (0.5%) 6 (0.5%) 10 (0.3%) 12 (0.2%) 12 (0.2%) 12 (0.2%)

Comparators 6 6 20 24 24 24

CPLD Macrocells 16 16 24 48 48 48

FPGA LUTs 640 640

Digital I/O 31 91

Dedicated Outputs 6 trim outputs 5 7 14 20 & 8 trim outputs 16 & 6 trim outputs 16 & 8 trim outputs

N-Channel FET Drivers 2 2 4 4 4

Trim Outputs (DAC) 6 None 8 6 8

ADC (10-Bit) Yes No No Yes* Yes Yes Yes

Package 32-pin QFNS 24-pin QFNS 32-pin QFNS 48-pin TQFP 100-pin TQFP 128-pin TQFP 208-ball ftBGA

Function POWR

6AT6 ProcessorPM POWR

607

POWR

1014

POWR

1014A

POWR

1220AT8

LPTM

10-1247

LPTM

12-12107

Hot Swap

-48V Hot-Swap Controller (Payload - isolated) P

+12 / 24V Hot swap Controller PPPPPP

Low Voltage Positive Supply Hot-Swap Controller P

Power Feed to

External Systems

-48V Supply Feed P

+12/24V Supply Feed PPPPPP

Redundant Supply

Selection

-48V Supply OR’ing using MOSFET P

+12/24V Supply OR’ing using MOSFET PPPPPP

Payload Power

Management

Reset Generation P PPPPPP

Voltage Supervision P PPPPPP

Watchdog Timer P PPPPPP

Voltage Monitoring and Supply Sequencing P PPPPPP

Fail Safe Sequencing PPP

Voltage Measurement Using ADC P PPPP

Power Supply Margining and Trimming P P P P

Power Supply Voltage Scaling P P P

Digital

Management

Functions

Reset Distribution P P

Fan Control P P

Boundary Scan P P

Fault Log P P

Voltage &

Current Fault

Detection

Measure

Voltage &

Current

Reset

Generation

Fail-Safe

Sequence

Control

Power Feed

to External

Circuits

DC-DC

Primary

Payload

ICs

DC-DC

Secondary

DC-DC

Secondary

Power

Supply

OR’ing

Hot Swap

Controller

Trim Margining

Voltage

Scaling

Sequencing

MOSFETs

Reset

Distribution

Fan

Control

Fault

Logging

BSCAN

Page 10

Lattice IP Cores and Reference Designs

LatticeCORE IP Cores

IP Core ECP3 ECP2M ECP2 SC

XP2 MachXO2

Communications

10 Gigabit Ethernet MAC

P P P P

10 Gigabit Ethernet MAC w/HiGig Interface

2.5 Gb Ethernet MAC

2.5 Gb Ethernet PCS

CPRI

P P P

OBSAI RP3

P P

Serial Rapid IO (SRIO)

P P

SFI5

SGMII and Gigabit Ethernet PCS

P P P

SPI4.2

P P

Triple Speed 10/100/1G Ethernet MAC

P P P P P

XAUI

P P

Connectivity

Display Interface Multiplexer

DVB-ASI

JESD204A

Multi-Rate SDI PHY

PCI Express Root Complex Lite

P P

PCI Express x1 Endpoint

P P

PCI Express x4 Endpoint

P P

PCI Master/Target 32-bit

P P P P P P

PCI Master/Target 64-bit

P P P P P

PCI Target 32-bit

P P P P P P

PCI Target 64-bit

P P P P P

PCS Pipe

P P

Tri-Rate Serial Digital Interface (SDI) PHY

Digital Signal

Processing

2D Edge Detector

P P P P

2D FIR Filter

P P P P

2D Scaler

P P P P

Advanced FIR Filter

P P P

Block Convolutional Encoder

P P P P P

Block Viterbi Decoder

P P P P P

Cascaded Integrator-Comb (CIC) Filter

P P P P P

Color Space Converter

P P P P P

CORDIC

P P P P P

Correlator

P P P P

Deinterlacer

P P P P

Distributed Arithmetic (DA) FIR Filter

P P P P P

Dynamic Block Reed-Solomon Decoder

P P P P P

Dynamic Block Reed-Solomon Encoder

P P P P P

FFT Compiler

P P P P

FIR Filter Generator

P P P P

Gamma Corrector

P P P P

Interleaver/De-interleaver

P P P P

Median Filter

P P P P

Numerically-Controlled Oscillator

P P P P P

Turbo Decoder

P P P P

Turbo Encoder

P P P P

Processor, Controller &

Peripheral

DDR SDRAM Controller - Pipelined

P P P P P P

DDR2 SDRAM Controller - Pipelined

P P P P P P

DDR3 PHY

DDR3 SDRAM Contoller

LatticeMico32 - Embedded Processor

P P P P P

LatticeMico8 - Embedded Microcontroller

P P P P P P

LPDDR SDRAM Controller

Scatter Gather DMA

P P P P P

Soft Error Detection

Video Frame Buffer

P P P P

1. LatticeSCM™ MACO

-based IP cores are not included in this table.

For a complete listing of IP cores from Lattice and its 3rd party partners, please go to www.latticesemi.com/ip.

Page 11

IP Suites

Lattice IP Suites provide many of the functions required to develop a total solution for common FPGA applications. In addition, multiple

Lattice FPGA families are supported with each IP Suite, so designers can develop solutions across multiple Lattice families, taking

advantage of the best features of each. The following table summarizes which IP cores are included in each IP Suite, and which FPGA

families are supported.

Suite

(One Year Node Locked

Subscription)

Annual License

Node Locked Renewal

(After First Year)

IP Core ECP3 ECP2/M SC/M XP2 XO2 XO

Value Suite

DDR3 Controller

Order #: DS-VAL-ST-U1 Order #: DS-VAL-ST-UR1

DDR2 Controller

P P P P P

DDR Controller

P P P P P P

LPDDR Controller

FFT Compiler

P P P

FIR Filter

P P P

Tri-Speed Ethernet MAC

P P P P

PCI Express Suite

PCI Express Endpoint x1

P P

Order #: DS-PCIE-ST-U1 Order #: DS-PCIE-ST-UR1

PCI Express Endpoint x4

P P

PCI Express Root Complex Lite x1

P P

PCI Express Root Complex Lite x4

P P

Scatter-Gather DMA Controller

P P P

PCI Master/Target 32-bit

P P P P P P

PCI Master/Target 64-bit

P P P P

PCI Target 32-bit

P P P P P P

PCI Target 64-bit

P P P P

DDR3 Controller

DDR2 Controller

P P P P P

DDR Controller

P P P P P P

LPDDR Controller

Ethernet Suite

Triple Speed Ethernet MAC

P P P P

Order #: DS-ETH-ST-U1 Order #: DS-ETH-ST-UR1

SGMII & Gb Ethernet PCS

P P P

10 Gb+ Ethernet MAC

P P P

XAUI

P P

SPI-4.2

P P

Scatter-Gather DMA Controller

P P P

DDR3 Controller

DDR2 Controller

P P P P P

DDR Controller

P P P P P P

Digital Signal

Processing (DSP)

Design Suite

Block Convolutional Encoder

P P P P

Order #: DS-DSP-ST-U1 Order #: DS-DSP-ST-UR1

Block Viterbi Decoder

P P P P

CIC Filter

P P P P

CORDIC

P P P P

DA-FIR Filter

P P P P

Dynamic Block RS Decoder

P P P P

Dynamic Block RS Encoder

P P P P

FFT Compiler

P P P

FIR Filter

P P P

Interleaver/De-Interleaver

P P P P

Num. Cont. Oscillator (NCO)

P P P P

Turbo Decoder

P P

Turbo Encoder

P P P

Video and Display

Suite

2D Edge Detector

P P P

Order #: DS-VDS-ST-U1 Order #: DS-VDS-ST-UR1

2D FIR Filter

P P P

2D Scaler

P P P

Color Space Converter

P P P P

Median Filter

P P P

Tri-rate SDI PHY

Deinterlacer

P P P

DVB ASI

DDR3 Controller

DDR2 Controller

P P P P P

DDR Controller

P P P P P P

Page 12

Format

Name Reference

Design Number LatticeECP3 MachXO2 MachXO LatticeXP2 WISHBONE

Compatible Verilog VHDL

7:1 LVDS Video Interface RD1030 P P P

8b/10b Encoder/Decoder RD1012 P P P

ADC Interface RD1089 P P P

Arbitration and Switching Between Bus Masters RD1067 P P P P

BSCAN - Multiple Scan Port Adressable Buffer (BSCAN1) RD1001 P P

BSCAN - Multiple Scan Port Linker (BSCAN 2) RD1002 P P P

CompactFlash Controller RD1040 P P P P P P

Control Link Serial Interface RD1051 P P P P P

Cyclic Redundancy Check RD1105 P P P P

Display Interface RD1093 P P

Fast Page Mode DRAM Controller RD1014 P P P P P

Flash Memory Controller with Wear Leveling RD1102 P P P

FPGA Loader AN8077 P

GPIO Expander RD1065 P P P P

HDLC Controller RD1038 P P P P

HDMI/DVI Multimedia Interface RD1097 P P P

C (Inter-Integrated Circuit) Bus Controller for Serial EEPROMs RD1006 P P P P P

C (Inter-Integrated Circuit) Bus Master RD1046 PPPPP P P

C (Inter-Integrated Circuit) Bus Master RD1005 P P P P

C (Inter-Integrated Circuit) Slave / Peripheral RD1054 P P P P P

C Slave to SPI Master Bridge RD1094 P P P

I2S Controller RD1101 P P P P

IDE/ATA Interface Controller RD1095 P P P

LCD Controller RD1053 P P P P P P

LED/OLED Driver RD1103 P P P

LPC (Low Pin Count) Bus Controller RD1049 P P P P P P

MDIO Peripheral RD1074 P P P P P

Memory Stick PRO Host Interface RD1109 P P P

NAND Flash Memory Controller RD1055 P P P P P

NOR Flash Memory Controller RD1087 P P P P P

PCI to NOR Flash Interface RD1050 P P P P

PCI Target 32-bit/33MHz RD1008 P P P P P

PCI/WISHBONE Bridge RD1045 P P P P P P

Power Management Bus (PMBus) RD1100 P P P P

PWM Fan Controller RD1060 P P P P P P

Read and Write Usercode RD1041 P P P

RGMII to GMII Bridge RD1022 P P P

SD Flash Controller RD1048 P P P P

SD Flash Controller Using SD Bus RD1088 P P P P

SDR SDRAM Controller – Advanced RD1010 P P P P P P

Simple Sigma-Delta ADC RD1066 P P P P P

Single Wire Interface RD1099 P P P

SM Bus Controller RD1098 P P P P

SPI GPIO Expander RD1073 P P

SPI Slave to PWM Generation RD1107 P P P

SPI (Serial Peripheral Interface) Controller RD1044 P P P P P P

SPI (Serial Peripheral Interface) Peripheral RD1075 P P P

Sub-LVDS To Parallel Sensor Bridge RD1122 P P P

Three Wire Power Supply Fault Logging RD1062 P P P P

UART (Universal Asynchronous Receiver/Transmitter) RD1011 P P P

UART (Universal Asynchronous Receiver/Transmitter) RD1042 P P P P P P

Wake on LAN RD1096 P P P

LatticeECP3, MachXO2, MachXO and LatticeXP2 Reference Designs

Page 13

Included in Development Kit

Name Reference

Design Number Format Power Manager

II Hercules

Platform

Manager ProcessorPM ispClock 5400D

5V and 3.3V Hot Swap Controller RD1057 PAC-Designer P

Supervisor, WDT and Reset Generation with ProcessorPM RD1056 PAC-Designer P P

Redundant Power Supply Management RD1064 PAC-Designer P

12V Hot Swap Control RD1068 PAC-Designer P

AMC Module Power Management RD1070 PAC-Designer

Voltage Monitoring for Fault Logging RD1072 PAC-Designer P

Single-Ended Clock Source from ispClock5400D Differential Clock Buffers RD1069 PAC-Designer P

Temperature Monitor using Platform Manager RD1080 VHDL

Fault Logging using Platform Manager RD1077 VHDL P

BSCAN1 - Multiple Scan Port Addressable Buffer RD1001 VHDL

BSCAN2 - Multiple Scan Port Linker RD1002 VHDL

Enhanced Closed-Loop Trim with I2C Control RD1078 VHDL P

GPIO Expander RD1065 VHDL

C Master Controller RD1005 VHDL

C Slave/Peripheral RD1054 VHDL

C Slave to SPI Master Bridge RD1094 VHDL

Long Delay Timers RD1079 VHDL P

Power Management Bus (PMBus) RD1100 VHDL

PWM Fan Controller RD1060 VHDL

SPI GPIO Expander RD1073 VHDL

Serial Peripheral Interface (SPI) RD1075 VHDL

Universal Asynchronous Receiver/Transmitter RD1011 VHDL

Three Wire Power Supply Fault Logging RD1062 VHDL

Distributed Power Management RD1128

Fail-Safe Sequencing During Field Updates With Platform Manager RD1129

Scalable Centralized Power Management With Field Update Support RD1130

ispMACH 4000 Reference Designs

Mixed Signal Reference Designs

Format Included in

Development Kit

Name Reference Design

Number

WISHBONE

Compatible Verilog VHDL BLIF NGO Pico

8b/10b Encoder/Decoder RD1012 P

Arbitration and Switching Between Bus Masters RD1067 P P

Fast Page Mode DRAM Controller RD1014 P

GPIO Expander RD1065 P P

HDLC Controller RD1009 P

C (Inter-Integrated Circuit) Bus Controller for Serial

EEPROMs RD1006 P P P

C (Inter-Integrated Circuit) Bus Master RD1005 P P P

C (Inter-Integrated Circuit) Slave / Peripheral RD1054 P P

LPC (Low Pin Count) Bus Controller RD1049 P P P

Multiple Scan Port Addressable Buffer (BSCAN1) RD1001 P

Multiple Scan Port Linker (BSCAN 2) RD1002 P

PCI Target 32-bit/33MHz RD1008 P P

PWM Fan Controller RD1060 P P

Read and Write Usercode RD1041 P P

SDR SDRAM Controller - Advanced RD1010 P P P

SPI GPIO Expander RD1073 P

SPI (Serial Peripheral Interface) Controller - WISH-

BONE Compatible RD1044 PPP

SPI (Serial Peripheral Interface) Peripheral RD1075 P P P

UART (Universal Asynchronous Receiver/Transmitter) RD1011 P

Wake on LAN RD1096 P P

Page 14

Features

Development Kits

- Power connections and power sources

- ispVM™ programming support

- On-board and external reference clock

sources

• Available on Windows and Linux platforms

• Software and IP with a 60-day license

(Windows or Linux)

• Variety of demos

• USB download cable

• Comprehensive Image Processing IP Library

• On-board Broadcom® Broadreach™ PHY

Enables IP over Coax

• On-board FTDI Chip provides easy

programming via low cost USB cable

- Gigabit Ethernet MAC Demo using

Mico32

- DDR3 Memory Controller Demo

• Available on Windows and Linux platforms

• USB A to USB B (Mini) Cable for FPGA

Programming via a PC

• 12V AC Power Adapter and International Plug

Adapters

• QuickSTART Guide

Ordering Part Number

LFXP2-5E-B2-EVN

Price

$49

Ordering Part Number

LFE3-95EA-PCIE-DKN

Price

$895

Ordering Part Number

LFE3-70EA-HDR60-DKN

Price

$399

Ordering Part Number

LFE3-35EA-VERSA-EVN

Price

$99*

Features

LatticeECP3 Versa Development Kit

HDR-60 Video Camera Development Kit

LatticeECP3 PCI Express Development Kit

LatticeXP2 Brevia2 Development Kit

• LatticeECP3 PCI Express x1/x4 Solutions

Board

- PCI Express x1 and x4 edge connector

interfaces

- On-board Boot Flash

- Both Serial SPI Flash and Parallel Flash

via MachXO programming bridge

- Shows interoperation with a high

performance DDR2 memory component

- Switches, LEDs, displays for demo

purposes

- Input connection for lab-power supply

• FPGA-based Image Signal Processing

• Fully Production-Ready HDR Camera Design

• 1080p Capable @ 60 frames per second

• Supports up to 16 Megapixel Sensors

• Supports up to two sensors simultaneously

• Full 60fps in streaming mode needs no

external frame buffer

• Fast Auto Exposure Instantly Adjust to

Changing Light

• Greater than 120 dB High Dynamic Range

(HDR) Performance

• Direct HDMI/DVI output from FPGA

• Extremely Low-Latency

• The LatticeECP3 Versa Evaluation Board:

- PCI Express 1.1 x1 Edge Connector

Interface

- Two Gigabit Ethernet Ports (RJ45)

- 4 SMA Connectors for SERDES Access

- USB Mini for FPGA Programming

- LatticeECP3 FPGA: LFE3-35EA-FF484

- 64 Mbit Serial Flash memory

- 1 Gbit DDR3 Memory

- 14-segment alpha-numeric display

- Switches and LEDs for demos

- SERDES Eye Quality Demo

- 4 PCI Express Demos

• LatticeXP2 FPGA: LFXP2-5E-6TN144C

• 2 Mbit SPI Flash Memory

• 1 Mbit SRAM

• Programmed via included mini-USB Cable

• 2x20 and 2x5 Expansion Headers

• Push buttons for General Purpose I/O and

Reset

• 4-bit DIP Switch for user-dened inputs

• 8 Status LEDs for user-dened outputs

Develop PCIe-based platforms using

a low-cost, low-power SERDES-based

FPGA with proprietary and Lattice provided

designs.

A fully production ready High Dynamic

Range (HDR) camera, designed to t into

commercially available camera housings.

Supports full 1080p resolution at 60 frames

per second in streaming mode through the

FPGA, without the need for an external

frame buffer.

Industry’s lowest cost platform for design-

ing PCI Express and Gigabit Ethernet

based systems. The kit includes free

demos and reference designs.

Easy-to-use, low-cost platform for evaluat-

ing and designing with LatticeXP2 FPGAs.

* This kit is available for a special price of $99 until December 31,

2011. Standard list price: $299.

Page 15

Features

Development Kits

Ordering Part Number

LC4256ZE-P-EVN

Price

$69

Ordering Part Number

LCMXO2-1200ZE-P1-EVN

Price

$49

Ordering Part Number

LCMXO2-1200HC-C-EVN

Price

$189

ispMACH 4000ZE Pico Development Kit

iCEblink40 Evaluation Kit

MachXO2 Pico Development Kit

MachXO2 Control Development Kit

• Pre-programmed Pico Power Demo

• ispMACH 4000ZE device

(LC4256ZE-5MN144C)

• Power Manager II device

(ispPAC-POWR6AT6-01SN32I)

• LCD panel

• USB mini jack socket for power, JTAG

programming, and I2C interface

• 2X15 header landing for off-board expansion

provides access to LC4256ZE GPIOs,

POWR6AT6 VMON inputs, I2C, and JTAG

chain

• Push-button for global reset

• 4-bit DIP switch to user-dened inputs

• 3.3V and 2.5V supply rails

• Two versions:

- High Performance: iCE40HX1K-VQ100

- Low Power: iCE40LP1K-QN84

• Powered by USB input

• 1Mbit SPI PROM (enough for two iCE40HX1K

images using WarmBoot)

• Four capacitive-touch buttons (requires FPGA

logic)

• Four user LEDs

• MachXO2 LCMXO2-1200ZE

• 4-character 16-segment LCD display

• 4 capacitive touch sense buttons

• 1 Mbit SPI Flash

• I2C temperature sensor

• Current and voltage sensor circuits

• Expansion header for JTAG, I2C

• Standard USB cable for device programming

and I2C communication

• RS-232/USB & JTAG/USB interface

• RoHS-compliant packaging and process

• MachXO2 LCMXO2-1200HC

• Power Manager II ispPAC-POWR1014A

• 128Mbit LPDDR memory, 4Mbit SPI Flash

• Current and voltage sensor circuits

• SD memory card socket

• Microphone

• Audio Amplier and Delta-Sigma ADC

• Up to two DVI sources and one DVI output.

• Up to two Display Inputs (7:1 LVDS) and one

Display Output (7:1 LVDS)

• Audio output channel

• Expansion header for JTAG, SPI, I2C and PLD

I/Os.

• Current and voltage sensor circuits

• Battery or USB power source

• RoHS-compliant packaging and process

• Marked for CE, China RoHS Environmental-

Friendly Use Period (EFUP) and Waste

Electrical and Electronic Equipment (WEEE)

Directives

• One USB connector cable

• QuickSTART Guide

• Dual PMOD header compatible with Digilent

PMOD boards (6x2 header)

• 3.33 MHz oscillator (can be modied to

support 33.33 MHz or 333 kHz)

• 1.2V and 3.3V power supplies

• All iCE40HX1K I/O available on headers or

0.1” through-holes

• Watch battery

• QuickSTART Guide

• LEDs & switches

• Standard USB cable for device programming

• RS-232/USB & JTAG/USB interface

• RoHS-compliant packaging and process

• AC adapter (international plugs)

• QuickSTART Guide

Battery-powered, low-cost platform to

accelerate the evaluation of ispMACH

4000ZE CPLDs.

Available

2Q 2012

Page 16

Features

MachXO Control Development Kit Features

Features

Development Kits

MachXO Pico Dev. Kit & MachXO Control Dev. Kit

Power Manager II Hercules Development Kit

ProcessorPM Development Kit

Platform Manager Development Kit

• Preloaded Control SoC Demo

• MachXO LCMXO2280

• Power Manager II ispPAC-

POWR1014A

• 2Mbit SPI Flash & 1Mbit SRAM

• I2C temperature sensor

• Current and voltage sensor circuits

• On-board fan

• Interface to 16 x 2 LCD panel*

• SD memory and Compact

Flash memory card sockets*

• Audio output channel

• Expansion header for SPI & I2C

• LEDs & switches

• Standard USB cable for device

programming and I2C communication

• RS-232/USB & JTAG/USB interface

• 3” x 1” prototyping area

• RoHS-compliant packaging and process

* LCD panel and SD/Compact

Flash memory not included in the

development kit

Ordering Part Number

PAC-POWR1220AT8-HS-EVN

Price

$109

Ordering Part Number

PACPOWR605-P-EVN

Price

$49

Ordering Part Number

LPTM10-12107-DEV-EVN

Price

$109

• The Standard Edition Hercules Development

Kit features the following:

- Preloaded Board Digital Management

Demo

- Hercules Standard Edition eval board

- Power Manager II ispPAC-

POWR1220AT8 and MachXO

LCMXO2280 PLD

• The Advanced Edition Hercules Development

Kit features the following:

- Preloaded Board Digital Management

Demo

- Hercules Advanced Edition evaluation

board with CompactPCI headers

- Power Manager II ispPAC-

POWR1220AT8 and MachXO

LCMXO2280 PLD

- Backplane accessory evaluation board

and power supply for live hot-swap

• AC adapter (international plugs)

• USB Connector Cable

• RoHS-compliant packaging and process

• Pre-congured Processor Support Demo

• ProcessorPM-POWR605

• Power Manager II POWR6AT6

• 3.3V, 2.5V, and 1.8V supply rails

• LEDs

• Slide potentiometer

• 2x14 expansion header

• USB mini jack socket (program/power)

• 2 Push-Buttons

• Preloaded Power Management Demo

• LPTM10-12107, Platform Manager, 208-ball

ftBGA package

• 35mm slide pots to emulate supply rail

variations

• Pads for user I/O, LED, and switches

• JTAG and I2C interface headers

• USB Cable

• 4-Bit DIP Switch

• JTAG and I2C Header Landings

• RoHS-compliant packaging and process

• USB connector cable

• QuickSTART Guide

• AC adapter with international plugs

• Programmable with ispVM System software

• QuickSTART Guide

Versatile, ready to use hardware platforms

for evaluating and designing with Power

Manager II devices. A Standard and Ad-

vanced Edition of each kit is available.

Versatile, ready-to-use hardware platform

for evaluating and designing with Proces-

sorPM power management devices.

A versatile, ready-to-use hardware plat-

form for evaluating and designing with

Platform Manager devices.

Features:

Breakout Board Evaluation Kits

• Preprogrammed with hardware test program

LCMXO2-1200ZE-1TG144C PLD (MachXO2

Breakout Board), LCMXO2280C-FTN256C

PLD (MachXO2280 Breakout Board),

POWR1014A-02TN48I (POWR1014A

Breakout Board), or LC4256ZE-TN144C CPLD

(ispMACH 4256ZE Breakout Board)

• LEDs

• Expansion Header Landings

Breakout Board Evaluation Kits for select

MachXO2, MachXO, ispMACH 4000ZE,

Power Manager II devices offer convenient

hardware evaluations by providing easy

hand-access to PLD I/Os. Ordering Part Number

LCMXO2-1200ZE-B-EVN

LCMXO2280-B-EVN

LC4256ZE-B-EVN

Price

$29.99

• Prototyping Area

• USB Mini Jack Socket (Program/Power)

• JTAG Header Landing

• RoHS-compliant packaging and process

• USB connector cable

POWR1014A-B-EVN $29.99

Ordering Part Number

LCMXO2280C-C-EVN

Price

$165

LCMXO2280C-M-EVN $89

MachXO Mini Development Kit Features

• MachXO PLD: LCMXO2280C-

4TN144C

• 2 Mbit SPI Flash memory

• 1 Mbit SRAM

• I2C temperature sensor

• USB mini jack sockets for

power, JTAG programming,

and RS-232 debugging

• 2X16 header for off-board

expansion provides access

to top and right side MachXO

banks

• Push-buttons for sleep mode

and reset

• 4-bit DIP switch to user-

dened inputs

• ADC/DAC circuit

• Sleep circuit

• 8 LEDs for user-dened

outputs

• RoHS-compliant packaging

and process

• Two USB connector cables

• QuickSTART Guide

Page 17

FPGA & CPLD Development Kits and Evaluation Boards

Product Part Number PCIe

Edge PCI Edge Ethernet SMAs Memory Prototype

Area

Utility

LEDs,

Switches

Additional Features

LatticeECP3 and ECP2 Boards and Kits

LatticeECP3 Versa LFE3-35EA-VERSA-EVN x1 10/100/1000 SERDES 1G DDR3 Expansion

Connectors P

LatticeECP3 AMC

Evaluation Platform LFE3-150EA-AMC-DKN 10/100/1000 DDR2 P

AMC PCB card edge interface

LatticeECP3 PCIe LFE3-95EA-PCIE-DKN x1, x4 DDR2 P

LatticeECP2M PCIe DK-PCIE-ECP2M-011 x1, x4 DDR2 P

LatticeECP3 Serial Protocol LFE3-95EA-SP-EVN x4 10/100/1000 SERDES,

LVDS, PLL

DDR2,

DDR3 P

Serial ATA

LatticeECP3 I/O Protocol LFE3-150EA-IO-EVN 10/100/1000 SERDES,

LVDS, PLL

2x DDR3

DIMM P P

HMZD Conn., Logic Analyzer Probe Con-

nector.

LatticeECP3 Video Protocol LFE3-95EA-V-EVN x4 DDR2 P

BNCs for SD/HD/3G-SDI, DisplayPort,

ChannelLink, CameraLink, DVI

LatticeECP2™

LatticeMico32/DSP LFE2-50E-D-EV 10/100 DDR

SO-DIMM P P

DAC/ADC, RS-232, SRAM, USB1.0

LatticeECP3 IO Protocol

ADC-DAC Interface LFE3-ADC-DAC-EVN

Connects LatticeECP3 I/O Protocol Board

to 3rd party ADC and DAC boards.

MachXO2 and XO Boards and Kits

MachXO2 Pico LCMXO2-1200ZE-P1-EVN Flash P

MachXO2 Control LCMXO2-1200HC-C-EVN LPDDR,

Flash P

MachXO Mini LCMXO2280C-M-EVN P

Mini System-On-Chip design, terminal

program interface

MachXO Control LCMXO2280C-C-EVN

Fan control, power supply mgmt and LCD

panel interface

MachXO2-1200ZE Breakout

Board LCMXO2-1200ZE-B-EVN P P

MachXO2280 Breakout

Board LCMXO2280-B-EVN P P

iCE40 Boards and Kits

iCEblink40 High

Performance ICE40HX1K-BLINK-EVN P P

iCEblink40 Low Power ICE40LP1K-BLINK-EVN P P

LatticeXP2 Boards and Kits

LatticeXP2 Brevia2 LFXP2-5E-B2-EVN SRAM,

Flash P

LatticeXP2 Standard LFXP2-17E-L-EV P P

DAC/ADC, RS-232, SRAM, Compact Flash

(CF) Connector

LatticeXP2 Advanced LFXP2-17E-H-EV 64-bit 10/100/1000 LVDS, PLL DDR2

SO-DIMM P P

DAC/ADC, RS-232, MDR-26, USB2.0, PS2

I/O, CF Connector

ispMACH 4000ZE Boards and Kits

ispMACH 4000ZE Pico LC4256ZE-P-EVN P

Battery powered with current metering

ispMACH 4000ZE LC4064ZE-EVN P P

ispMACH 4000ZE LC4256ZE-EVN P P

ispMACH 4256ZE Breakout

Board LC4256ZE-B-EVN P P

Video Boards and Kits

HDR-60 Video Camera LFE3-70EA-HDR60-DKN IP Over Coax DDR2 Expansion

Connectors P

1080p/60fps HDR video, HDMI

Dual Sensor Interface Board LCMXO2-4000HE-DSIB-

EVN

For use only with HDR-60 Video Camera

Board. Enables dual-camera / 3D applica-

tions.

MN34041 Sensor Nanvesta

Headboard LF-PNV-EVN

Image sensor board for use only with

HDR-60 Video Camera Board.

9MTO24 Sensor Nanvesta

Headboard LF-9MT024NV-EVN

Image sensor board for use only with

HDR-60 Video Camera Board.

Page 18

Mixed Signal Development Kits and Evaluation Boards

Programming Hardware

Board Device Package I/O Access LEDs and Switches Special Circuits Included Hardware

Development Kits

Platform Manager

Development Kit LPTM10-12107 208 ftBGA

USB, PCB test points,

header, power terminals

LCD, DIP switches, button

and slide potentiometer

Temperature

measurement, power

supply margin and trim,

fault logging, reset

distribution, I2C/SPI

interfaces, voltage scaling

USB cable, wall adapter

power supply

Power Manager II

Hercules

Development Kit

ispPAC-POWR1220AT8

MachXO2280

100 TQFP

144 TQFP

USB, PCB test points,

header, power terminals

LCD, DIP switches, button

and toggle switches, slide

potentiometer

12V hot swap and power

OR’ing, power supply

margin and trim, fault

logging, reset distribution,

I2C/SPI interfaces, voltage

scaling

USB cable, wall adapter

power supply

ProcessorPM

Development Kit ispPAC-POWR605 24 QFN 12V DC wall adapter Status LEDs, DIP switch USB interface, voltage

measurements

USB cable, wall power

supply

Evaluation Boards

ispClock5312S

Evaluation Board ispClock5312S 48 TQFP SMA Status LEDs, DIP switch Integrated power supply

DB25 parallel

programming cable

wall adapter power supply

(US standard, 300mA)

ispClock5620A

Evaluation Board ispClock5620A 100 TQFP SMA Status LEDs, DIP switch

DB25 parallel

programming cable

wall adapter power supply

(US standard, 300mA)

POWR1014A Breakout

Board ispPAC-POWR1014A 48 TQFP PCB test points Status LEDs USB cable

Product Part Number Description

Download Cable (1.8V to 5V

Parallel Port Programming Cable) HW-DLN-3C

Parallel port programming cable

Download Cable (1.2V to 5V USB

Programming Cable) HW-USBN-2A

USB programming cable

Model 300 Desktop Programmer pDS4102-PM300

Enables prototype programming of all Lattice JTAG non-volatile programmable logic products (1.8V, 2.5V, 3.3V,

and 5V programming voltages).

Desktop Programming Socket

Adapters —

Adapters are speciﬁc for the device/package combination required. See the Lattice web site for a complete list of

adapters available.

Page 19

FPGA and CPLD Design Software

Lattice Diamond 2.0

(Subscription License)

Windows/Linux

Lattice Diamond 2.0

(Free License)

Windows/Linux

ispLEVER Classic 1.5

Windows

iCEcube2

(Free License)

Windows/Linux

FPGA/CPLD Support

LatticeECP3 P

LatticeECP2M/S P

LatticeECP2S P

LatticeSC/M P

MachXO2 P P

MachXO P P

LatticeXP2 P P

LatticeECP2 P P

LatticeECP/EC P P

LatticeXP P P

iCE40 P

iCE65 P

ispMACH 4000B/C/V/Z/ZE P

ispMACH 5000VG P

ispXPGA

ORCA

FPGA P

ORCA FPSC P

ispXPLD

5000MX P

MACH4A3/4A5 P

ispLSI

2000/5000 P

ispGDX2™ and ispGDX

ispGAL™ and GAL

Software Features

Design Exploration P P P

Project Management PPPP

VHDL & Verilog Support PPPP

EDIF Support PPPP

Schematic Support PPPP

ABEL P

Synopsys

Synplify Pro™ for Lattice-Synthesis PPPP

Lattice Synthesis Engine (LSE) MachXO2/MachXO Only MachXO2/MachXO Only

IP and Module Conﬁguration P P

Module Only

Power Estimation & Calculation P P P

Timing Analysis PPPP

Integrated HDL Analysis P P P

Floorplanning PPPP

EPIC Device Editor P P

ORCA FPGA Only

On-Chip Debug P P

ispXPGA Only

TCL Scripting Dictionaries P P

Aldec

Active-HDL Lattice Edition Simulation Windows Only Windows Only

Windows Only

Operating Systems Windows 7/XP/Vista (32-bit and 64-bit) PPPP

Linux (Red Hat Enterprise v4, v5, v6; 32-bit and 64-bit) P P P

Licensing & Updates

License Terms One Year Subscription One Year – Renewable

One Year – Renewable

Node-Locked License PPPP

Floating License P P

PAC-Designer — Mixed-Signal Design Software

Device Support Design Entry Simulation Programming Mgmt. License Operating System

Platform Manager

Schematic,

LogiBuilder, Design

Utilities

Waveform Simulation

Active-HDL

PAC-Designer and

ispVM System Single User, Floating Windows 7/Vista/XP/2000

ProcessorPM

Power Manager II

Power Manager

ispClock5600A

ispClock5300S

ispClock5600V

Technical Support

USA & Canada: 1-800-LATTICE (528-8423)

For other locations: +1-503-268-8001

PLD Technical and Software: techsupport@latticesemi.com

Mixed Signal: ispPACs@latticesemi.com

Additionally, customers can receive technical support for

Lattice’s Programmable Logic Products from our Asia based

applications group, by contacting Lattice Asia applications

during the hours of 8:30 a.m. to 5:30 p.m. Beijing Time

(CST) +0800 UTC (Chinese and English language only).

Asia: +86-21-52989090

techsupport-asia@latticesemi.com

Corporate Headquarters

Lattice Semiconductor Corporation

5555 Northeast Moore Court

Hillsboro, Oregon 97124-6421 USA

Telephone: +1-503-268-8000

Facsimile: +1-503-268-8347

Web: http://www.latticesemi.com

Software Licensing

Email: lic_admn@latticesemi.com

Web: http://www.latticesemi.com/licensing/index.cfm

holders. Lattice Semiconductor Corporation, L Lattice Semiconductor Corporation (logo), L (stylized), L (design), Lattice (design), Lattice Diamond,

LSC, E2CMOS, FlashBAK, exiFLASH, exiMAC, exiPCS, FreedomChip, GAL, GDX, Generic Array Logic, HDL Explorer, iCE40, iCEblink, iCEcube2,

IPexpress, ISP, ispATE, ispClock, ispDOWNLOAD, ispGAL, ispGDS, ispGDX, ispGDXV, ispGDX2, ispGENERATOR, ispJTAG, ispLeverCORE, ispLSI,

ispMACH, ispPAC, ispTURBO, ispVIRTUAL MACHINE, ispVM, ispXP, ispXPGA, ispXPLD, LatticeCORE, LatticeECP3, LatticeECP2, LatticeECP2M,

LatticeECP, LatticeECP-DSP, LatticeMico, LatticeMico8, LatticeMico32, LatticeSC, LatticeSCM, LatticeXP, LatticeXP2, MACH, MachXO, MachXO2,

MACO, ORCA, PAC, PAC-Designer, PAL, Performance Analyst, Platform Manager, ProcessorPM, PURESPEED, Reveal, Silicon Forest, Speedlocked,

Speed Locking, sysCLOCK, sysCONFIG, sysDSP, sysHSI, sysI/O, sysMEM, The Simple Machine for Complex Design, TransFR, UltraMOS, and

specic product designations are either registered trademarks or trademarks of Lattice Semiconductor Corporation or its subsidiaries in the United

States and/or other countries. ISP is a service mark of Lattice Semiconductor Corporation.

August 2012 • Order #: I0211H