P3G-08 - Omron - Datasheet.Directory

1/16 DIN, Quartz Timer with

Four-Digit LED Display

■ Five wide ranges to choose from

■ Wide-range AC or DC supply voltages

■ Elapsed time (UP) or time remaining

(DOWN) display available

■ Selectable no-voltage reset and gate

inputs expand capabilities

■ Memory protection circuit available on

AC/DC models; order back-up battery

separately from accessories

■ Easy-to-read 8 mm-high LED display

■ Panel mounting adapter, sockets, and

accessories may be ordered separately

Timing functions ON-delay

Contact type SPDT relay Solid-state open collector

Display type Elapsed time (UP) Time remaining (DOWN) Elapsed time (UP)

Memory protection Not provided Provided Not provided Not provided

Terminal form 8-pin round 11-pin round 8-pin round socket 8-pin round socket

socket socket

0.001 to 9.999 sec — — — H5CN-XZNS-AC100-240

H5CN-XZNS-DC12-48

0.01 to 99.9 sec H5CN-XAN-AC24 — — —

H5CN-XAN-AC100-240 H5CN-XANM-AC100-240 H5CN-YAN-AC100-240 H5CN-XANS-AC100-240

H5CN-XAN-DC12-48 — H5CN-YAN-DC12-48 H5CN-XANS-DC12-48

0.1 to 999.9 sec H5CN-XBN-AC24 — — —

H5CN-XBN-AC100-240 H5CN-XBNM-AC100-240 H5CN-YBN-AC100-240 —

H5CN-XBN-DC12-48 H5CN-XBNM-DC24 H5CN-YBN-DC12-48 —

1 s to 99 min 59 s H5CN-XCN-AC24 — H5CN-YCN-AC24 —

H5CN-XCN-AC100-240 H5CN-XCNM-AC100-240 H5CN-YCN-AC100-240 —

H5CN-XCN-DC12-48 — H5CN-YCN-DC12-48 —

1 min to 99 h 59 min H5CN-XDN-AC24 — — —

H5CN-XDN-AC100-240 H5CN-XDNM-AC100-240 H5CN-YDN-AC100-240 —

H5CN-XDN-DC12-48 — H5CN-YDN-DC12-48 —

■ TIMERS

NOTE: The complete part numbers shown here are the only H5CN timers currently available.

Some time ranges and supply voltages have been discontinued.

Part

number

Digital Timer H5CN

Ordering Information

H5CN H5CN

■ ACCESSORIES

Supply

voltage

Power

consumption

Control

output

ON-delay with time

remaining display ON-delay with elapsed

time display

Open collector

solid-state

Timing

functions

Specifications

Part number H5CN-X❑N H5CN-X❑NM H5CN-Y❑N H5CN-X❑NS

AC 24 V, 100 to 240 V; 50/60 Hz 100 to 240 V; 50/60 Hz

DC 12 to 48 V (permissible ripple factor; 20% max.)

Operating voltage 85 to 110% of the rated voltage

AC 12 VA at 240 VAC, 50/60 Hz —

DC 2.5 W at 48 VDC 2.5 W at 48 VDC

ON-delay with elapsed time display

Reset, gate inputs No voltage

Type Time limit SPDT relay

Instantaneous — —

Max. load 3 A, 250 VAC (p.f. = 1) 100 mA max. 30 VDC

Min. load 10 mA, 5 VDC

Repeat accuracy ±0.01% ±0.05 sec max. (power-ON start); ±0.005% ±0.03 sec max. (reset start)

Setting error See "Repeat accuracy"

Resetting system Power-OFF and external reset

Resetting time Power OFF: 0.5 sec min.; External reset: 0.02 sec signal min.

Indicators Time UP (red LED), 8 mm LED numeric display

Materials Plastic

Mounting Panel, track, surface

Connections 8-pin round socket 11-pin round socket 8-pin round socket

Weight 150 g (5.31 oz.)

Approvals UL/CSA/SEV

Operating ambient temperature -10° to 55°C (14° to 131°F)

Humidity 35 to 85% RH

Description Part number

Sockets 11-pin Bottom surface or track mounting, top screw terminals P2CF-11

Bottom surface or track mounting, top screw terminals, finger safe terminal P2CF-11-E

conforms to VDE0106/P100

Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11

8-pin Bottom surface or track mounting, top screw terminals P2CF-08

Bottom surface or track mounting, top screw terminals, finger safe terminal P2CF-08-E

conforms to VDE0106/P100

Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3G-08

Terminal cover for P3G sockets, conforms to VDE0106/P100 Y92A-48G

Panel mounting adapter Fits behind panel, ideal for side by side installation. Use P3G❑-❑ sockets Y92F-30

Battery for Use with H5CN-❑❑❑M timers Y92S-20

memory backup

Protective cover Hard plastic cover protects against dust, dirt and water; not for use with panel covers Y92A-48B

Soft plastic cover protects against dust, dirt and water; not for use with panel covers Y92A-48D

NEMA 4 cover Waterproof front cover Y92A-48N

Mounting track DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick PFP-50N

DIN rail, 1 m (3.28 ft) length; 7.3 mm thick PFP-100N

DIN rail, 1 m (3.28 ft) length; 16 mm thick PFP-100N2

End plate PFP-M

Spacer PFP-S

Specifications table continued on the next page.

H5CN H5CN

Part number H5CN-X❑N H5CN-X❑NM H5CN-Y❑N H5CN-X❑NS

Vibration Mechanical durability 10 to 55 Hz; 0.75 mm (0.03 in) double amplitude

Malfunction durability 10 to 55 Hz; 0.5 mm (0.02 in) double amplitude

Shock Mechanical durability 30 G

Malfunction durability 10 G

Variation due to voltage change See "Repeat Accuracy"

Variation due to temperature change See "Repeat Accuracy"

Insulation resistance 100 MΩ min. at 500 VDC

Dielectric strength 2,000 VAC, 50/60 Hz for 1 minute between current-carrying terminal and exposed non-

current-carrying metal parts, between power supply circuit, and control output circuit

Service life Mechanical 10 million operations minimum Not applicable

Electrical 100,000 operations minimum at maximum ratings Not applicable

SPECIFICATIONS continued

Engineering Data

■ ELECTRICAL SERVICE LIFE

Note: The service life graphs apply

to all relay output models.

They do not apply to solid-state

output models H5CN-XZNS or

H5CN-XANS.

H5CN H5CN

Timing Charts

■ ELAPSED TIME (UP) DISPLAY

■ TIME REMAINING (DOWN) DISPLAY

Reset input ON

OFF

Gate input (interruption) ON

OFF

Digital display

Control output (NO) ON

OFF

Time UP indicator ON

OFF

Time up

Set value

Time up

Reset input ON

OFF

Gate input (interruption) ON

OFF

Digital display

Control output (NO) ON

OFF

Time UP indicator ON

OFF

No display No display

Set value

Dimensions

Unit: mm (inch)

■ TIMERS Panel cutout

Note: Recommended panel

thickness is 1 to 3.2 mm.

Panel cutout conforms to

DIN 43700.

(1.97)

(1.77)

45 (1.97)

(1.89)

44.8

(1.76)

97.4

(3.84)

H5CN H5CN

P2CF-08 Track Mounting/Front Connecting Socket

Two 4.5 dia.

holes

7.8

(0.31)

50 max.

(1.97)

Eight

M3.5 x 7.5 sems 3

(0.12) 4.5

(0.18)

20.3 max.

(0.80)

Two, 4.5 dia. or two

M4 socket mounting holes

Surface Mounting

Holes

(0.16)

Terminal Arrangement/

Internal Connections

(Top View)

40 ± 0.2

(1.57)

70 max.

(2.76)

35.4

(1.39)

P2CF-08E Finger Safe Terminal Type

Conforming to VDE0106/P100

Eight

M3.5 x 7.5 sems 7.8

(0.31)

70 max.

(2.76) Two 4.5 dia.

holes

50 max.

(1.97)

40±0.2

4.5

(0.18)

35.4

(1.39)

21.5 max

20.3

1.3

■ ACCESSORIES

P2CF-11 Track Mounting/Front Connecting Socket

P3G-08 Back Connecting Socket

27 dia

(1.06)

(1.77)

4.9

(0.19) 17

(0.67)

Terminal Arrangement

70 max.

(2.76)

Eleven

M3.5 x 7.5 sems 7.8

(0.31)

Two 4.5 dia.

holes

(0.16)

(0.12) 4.5

(0.18)

35.4

(1.39)

31.2 max.

(1.23)

Two, 4.5 dia. or two

M4 socket mounting holes

Surface Mounting Holes

40 ± 0.2

(1.57)

50 max.

(1.97)

H5CN H5CN

P3GA-11 Back Mounting Socket

Y92F-30 Mounting Adapter

Adapter installs behind the panel. It is ideal for side by side installation. Use P3GA-11 or P3G-08 sockets.

Note: Recommended

panel thickness

is 1 to 3.2 mm.

Panel cutout

Panel Mounting

adapter P3G-❑❑

socket

Terminal arrangement

(1.89)

(2.28)

(3.78)

(1.77)

16.3

(0.64)

(1.01)

27 dia

(1.06)

Y92A-48G Finger Safe Terminal for P3G(A)

Conforming to VDE0106/P100 Twelve, 6.4 dia. holes

34 47.7

x 4.47 48 x 48

16.5

47.4

27.6

Eight

M3.5 x 7.5 sems

P2CF-11-E Finger Safe Terminal Type

Conforming to VDE0106/P100

7.8

(0.31)

70 max.

(2.76)

1.2

4.5

(0.18)

35.4

(1.39)

Two 4.5 dia.

holes

50 max.

(1.97)

40±0.2 30

31.2 max

H5CN H5CN

Y92S-20 Battery for Memory Backup

Use this battery with H5CN-XN❑M timers with memory protection circuit. While the timer's

built-in memory protection circuit can retain values for power failures lasting up to 10

minutes, the optional battery protects memory in case of a longer power outage. We

recommend using the battery as a safeguard. Memory values can be retained for up to 5

years.

4.5 dia. hole

(+)

31.0

( – )

Lead wire with spade lug

120 mm (4.72 in) length

Y92A-48B Hard Plastic Cover

Hard plastic cover Y92A-48B and soft plastic cover Y92A-48D snap onto the front of the timer to protect against dirt and water. The

Y92A-48B hard plastic cover prevents accidental resetting. Y92A-48D soft plastic cover fits snugly over the front and allows settings to

be changed. These covers are intended for use in areas where unusual service conditions do not exist.

50.5

(1.99)

50.5

(1.99) 16 (0.63)

overall

depth

(1.2)

PFP-100N, PFP-50N Mounting Track PFP-100N2 Mounting Track

4.5

(0.18) 7.3±0.15

35±0.3 27±0.15

(0.04)

15 25 10 25 25 25

4.5

(0.18)

15 25 10 25 L25 25 15

35±0.3

(0.04)

(0.63)

29.2

(1.15)

1.5

(0.06)

27 24

PFP-M End Plate PFP-S Spacer

(1.97)

11.5

(0.45)

M4 x 8

pan head

screw

1.8

135.5 35.3

(1.39)

(0.39)

6.2

(0.24) 1.8

(0.07)

(0.20)

(0.63)

34.8

(1.37)

(1.74)

1 m PFP-100N

50 cm PFP-50N

1 m PFP-100N2

L: Length

(10.39) 4.8 (0.19)

1.3 (0.05)

16.5

(0.65)

Y92A-48D Soft Plastic Cover

H5CN H5CN

Part

number Input terminal number (no-voltage only) Power supply terminal numbers Output terminal numbers

COM Gate Reset AC (common), DC– AC (hot), DC+ COM NC NO DC- DC+

H5CN-❑❑N 1 4 3 2 7 8 5 6 — —

H5CN-❑❑❑S 1 4 3 2 7 8 — 6 — —

H5CN-❑❑❑M 3 5 7 2 10 11 8 9 1 4

H5CN-❑❑N Timer H5CN-❑❑❑S Timer H5CN-❑❑❑M Timer

■ POWER SUPPLY

H5CN-❑❑N and H5CN-❑❑❑S Timers H5CN-❑❑❑M Timers

Connect the timer so that the supply voltage is For models with memory protection, connect

applied to terminals 2 and 7. This is for models the supply voltage to terminals 2 and 10.

without memory protection.

■ CONTROL OUTPUT

Timed contact output type H5CN-❑❑N

Terminals 5, 6 and 8 are used for the output

relay. A normally open contact (Load 1) is

connected between terminals 6 and 8. A

normally closed contact (Load 2) is connected

between terminals 5 and 8.

Note: Internal (isolated) contacts are shaded.

Connections

H5CN H5CN

Timed contact output with memory protection H5CN-X❑NM

Terminals 8, 9 and 11 are used for the output relay.

A normally open contact (Load 1) is connected

between terminals 9 and 11. A normally closed

contact (Load 2) is connected between terminals

8 and 11.

Resistance 1 KΩ max.

Residual voltage 1 V max. when the contact makes

Contact material Gold-plated contacts

■ INPUT REQUIREMENTS

Contact Solid-State

Input type Open collector transistor

Voltage when collector is OFF 20 V min.

Collector current 50 mA min.

Input current between

collector and base 0.6 mA max.

Note: Select a contact with short bounce time. Contact

bounce causes an error in the operate time equal

to bounce time.

■ RESET INPUT

Timers without memory protection H5CN-❑❑❑, H5CN-❑❑❑S

Connect a no-voltage contact or an open collector transistor

output to terminals 1 and 3. The timer resets when contact

is made or when the transistor turns ON.

Timers with memory protection H5CN-X❑NM

Connect a no-voltage contact or an open collector transistor

output to terminals 3 and 7. The timer resets when contact

is made or when the transistor turns ON.

Timed Solid-state output type H5CN-X❑NS

The solid-state output uses an open collector

type transistor. Connect terminal 6 (collector) to

the positive terminal of the load. Connect

terminal 8 (emitter) to the negative terminal. A

built-in surge suppression diode on terminal 5

should be connected to the positive terminal of

the load when the timer switches an inductive

load.

H5CN H5CN

■ GATE INPUT

Cumulative Timing Using the Gate Input with ON-Delay

When the gate signal is closed, timing is temporarily

stopped. When the gate signal opens, timing resumes

at the point of interruption. The gate input terminal

permits the timer to sum up times T1, T2 and T3 as

shown in the timing chart.

Timers without memory protection H5CN-❑❑❑, H5CN-❑❑❑S

Connect a no-voltage contact or an open collector

transistor output to terminals 1 and 4. The gate

input interrupts timing when the contact closes or

when the transistor is ON. Timing resumes from the

point of interruption when the gate input is

removed.

■ BATTERY FOR MEMORY PROTECTION

Connect the Y92S-20 battery between terminals 1

and 4 on H5CN-❑❑❑M timers. The 3 V lithium

battery is in a holder with lead wire and termina-

tions. It may be used to preserve timer memory

for power outages that are longer than 10 minutes

duration. Because power failure duration is

unpredictable, we recommend using Y92S-20 for

long-term memory back up.

■ SIMULTANEOUS INPUT TO SEVERAL H5CN TIMERS

For expanded convenience, input signal may

be used to apply gate and reset signals to

several H5CN timers. Also a combination of

gate to some and reset to other timers is

possible. Timers with and without memory

backup may be used together. Pay attention

to the different terminal numbers required for

gate and reset when mixing timer types.

Gate input, without memory protection Gate input, with memory protection

Interruption Interruption

T2T3

→→← ←→

Time up

OFF

[

OFF

[T1

OFF

[

OFF

[

Power supply–

Gate input–

Digital display–

Control output–

←

0 1 2 3 3 4 5 6 7 7 8 9 10

Preset time = 10 seconds

Timers with memory protection H5CN-❑❑❑M

Connect a no-voltage contact or an open collector

transistor output to terminals 3 and 5. The gate

input interrupts timing when the contact closes or

when the transistor is ON. Timing resumes from

the point of interruption when the gate input is

removed.

H5CN H5CN

Simultaneous input to H5CN, continued

Operation

■ SETTING THE TIME PRESET

Use the four pushwheel switches on the front panel to

set the desired time. The H5CN timer does not display

the decimal point. Firmly push the switches to avoid

having two numbers appear in the display window.

This causes the operating time to drift widely.

Do not change the setting while the timer is powered

up. It may cause a momentary output to occur.

Undesirable settings

5 min 30 s?

25 min 30 s?

35 min 30 s?

WARNING

Do not set all four digits to

zero. This causes a momentary

output to occur that may lead to

accidental injury or damage.

Mounting

■ PANEL MOUNTING

Using Y92F-30 Adapter

Insert the timer through the panel cutout. Push the Y92F-30

adapter from the rear of the timer as far forward toward the

panel as possible. Push the P3G❑-❑❑ socket onto the rear

of the timer. Then wire the socket. Tighten the two retaining

screws. To release the adapter, lift the tab at the rear of the

adapter.

Reset and gate inputs, without memory Reset and gate inputs, with memory protection

Reset input, without memory Reset input, with memory protection

H5CN H5CN

Using Y92F-30 Adapter (continued)

Several timers may be panel mounted close

together using Y92F-30 adapter as shown

here. When mounting two or more timers in

a vertical line, arrange the adapters so that

their molded tabs are positioned on the

right and left sides. When mounting two or

more timers in a horizontal line, arrange the

adapters so that their molded tabs are

positioned on the top and bottom sides.

Molded

tab Molded

tab

Panel cutout for side-by-side

mounting of two timers

P2CF-❑❑ Socket

Mounting

The P2CF-❑❑ socket has two hooks that

secure the timer to the socket. Be sure to

allow at least 20 mm (0.79 in)

clearance above and below the

socket to gain access and to release

the hooks for servicing and mainte-

nance. Insert timer into the socket.

Latch hooks. Then clip rear of the

socket to the track. Push the bottom

onto the track until the latch hooks

securely.

Pull the latch on the socket with a flat-

blade screwdriver and remove the timer

and socket as one unit.

Removal

OMRON ELECTRONICS LLC OMRON CANADA, INC.

One East Commerce Drive 885 Milner Avenue

Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8

1-800-55-OMRON 416-286-6465

Cat. No. GC TMCN1 3/02 Specifications subject to change without notice. Printed in the U.S.A.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.com/oci

NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4.