82 Constant Voltage 316L SS Pressure Sensor 19mm Diameter Package 0 - 100mV Output Absolute and Gage Temperature Compensated DESCRIPTION The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 82 constant voltage can be configured for o-ring mounting or threaded process fittings and is designed for OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. Please refer to the 82 uncompensated and compensated datasheets for more information on different features of the 82. FEATURES APPLICATIONS O-Ring Mount/Threaded Process Fittings -40C to +125C Operating Temperature Up to 0.1% Pressure Non Linearity Solid State Reliability Medical Instruments Process Control Fresh & Waste Water Measurements Partial Vacuum Gas Measurement Pressure Transmitters Tank Level Systems (RV & Industrial) STANDARD RANGES Range psia 82CV psig 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to 100 0 to 300 0 to 500 www.meas-spec.com 1/4 February 2015 82 Constant Voltage PERFORMANCE SPECIFICATIONS Supply Voltage: 10Vdc Ambient Temperature: 25C (unless otherwise specified) 001PSI PARAMETERS MIN TYP MAX 015PSI 005PSI MIN TYP MAX MIN TYP MAX UNITS NOTES 1 Span 77 80 83 98 100 102 99 100 101 mV Zero Pressure Output -2 0 2 -2 0 2 -1 0 1 mV 0.3 -0.2 0.1 %Span 0.02 0.10 -0.10 0.02 0.05 %Span 12.5 5.5 7.0 4.0 Pressure Non Linearity -0.3 Pressure Hysteresis -0.10 Repeatability 0.02 Input Resistance 5.5 Output Resistance 4.0 9.0 0.02 +0.2 -0.1 0.10 -0.05 12.5 5.5 7.0 4.0 0.02 9.0 0.02 9.0 2 %Span 12.5 K 6.0 K Thermal Hysteresis - Span -0.25 0.05 0.25 -0.25 0.05 0.25 -0.25 0.05 +0.25 %Span 3 Thermal Hysteresis - Offset -0.25 0.05 0.25 -0.25 0.05 0.25 -0.25 0.05 +0.25 %Span 3 Temperature Error - Span -1.0 1.0 -1.0 1.0 -1.0 1.0 %Span 3 Temperature Error - Offset -1.0 1.0 -1.0 1.0 -1.0 1.0 %Span 3 Long Term Stability - Span 0.10 0.10 0.10 %Span 4 Long Term Stability - Offset 0.25 0.25 0.10 %Span 4 Supply Voltage 10 14 10 14 10 14 V Output Load Resistance 5 5 5 M Insulation Resistance (50Vdc) 50 50 50 M Output Noise (10Hz to 1KHz) 1 1 1 Response Time (10% to 90%) 0.1 0.1 0.1 Pressure Overload 10x Pressure Burst Operating Temperature Compensated Temperature Storage Temperature 3x 12x 4x uV p-p ms 3x Rated 4x Rated -20 +70 -20 +70 -40 +125 C 0 +50 0 +70 -20 +85 C -40 +125 -40 +125 -40 +125 C Media - Pressure Port Liquids and Gases compatible with 316L Stainless Steel and Buna-N Media - Reference Port Compatible with Silicon, Pyrex, Gold, Fluorosilicone RTV and 316L Stainless Steel www.meas-spec.com 2/4 6 7 8 Notes 1. Ratiometric to supply voltage. 2. Best fit straight line. 3. Maximum temperature error within the compensated temperature range with respect to 25C. 4. Long term stability over a one year period with constant current and temperature. 5. Minimum resistance between case and pins. 6. 10 psi maximum for 1 psi devices. 7. Maximum temperature range for product with standard cable and connector is -20C to +105C. 8. Gage units not recommended for high vacuum applications. For high vacuum applications consult factory. 82CV 5 February 2015 82 Constant Voltage DIMENSIONS APPLICATION SCHEMATIC 82CV www.meas-spec.com 3/4 February 2015 82 Constant Voltage ORDERING INFORMATION 82CV - 050 G - 1 C T Model - Pressure Range Pressure Type - Fitting Type Electrical Vent 82CV - 001* 005 015 030 050 100 300 G = Gage A = Absolute - Blank = O-Ring Mount 1 = 1/4-18NPT 2 = 1/8-27 NPT 3 = 7/16-20UNF 9 = 1/4-19BSP R = Ribbon Cable C = Cable w/ Connector Blank = No Tube T = Tube *1psi only available in gage type NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assum ed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specif ically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 82CV www.meas-spec.com 4/4 February 2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 82CV-015G-R 82CV-005G-R 82CV-100A-R 82CV-300G-R