PDS-104GO
4+1 Outdoor Switch, 60W per port, Managed PoE, AC Input
• 5 ports – 1 SFP data input, 4 PoE outputs
• Remotely managed – SNMP and web
• Extends network reach by additional 100m
• Outdoor rated: IP66
• Extended temperature range -40ºC, +50ºC
• IEEE802.3at compliant, 60W per port
• Supports 10/100/1000Mbps data rates
• Includes integral surge protection
• Plug ‘n Play installation (installer does not have to open unit)
The PDS-104GO is an outdoor PoE switch. It enables the connection of 4 powered devices to the network such as an outdoor WLAN, outdoor
IP Camera and outdoor P2P radio.
The switch oers SFP port for uplink in order to support Optical interface or electrical interface. The switch is IP66 rated and can be
installed in outdoor environments. There is no need to open the unit during installation. Deployment is simple and straight forward.
The PDS-104GO delivers PoE power up to 60W per device. In addition, it enables remote monitoring and control of the devices’ status,
including remote reset.
The 104GO extends the reach between the switch and powered devices by an additional 100 m, to a maximum of 200 meters, a major
benet in many applications.
The PDS-104GO oers lightning protection to the switch itself and to the indoor network.
Overview
Key Features
Outdoor WLAN AP1
Data
AC Power
Data & Power
Outdoor Camera1
Indoor
Outdoor
Indoor
Outdoor
PDS-104GO
Switch AC Power
Outdoor WLAN AP2Outdoor Camera 1Outdoor Camera 2
Figure 1: PDS-104GO
PDS-104GO
4+1 Outdoor Switch, 60W per port, Managed PoE, AC Input
Feature Description
No. of Ports 5
Data Rates 10/100/1000 Mbps (half/full duplex)
Power over Ethernet Output
Pin Assignment and Polarity:
Ports 1 & 2: 1/2, 3/6, 4/5 and 7/8
Ports 3 & 4: 1/2 and 3/6
User Port Power 60 W per port, 150 W total
Input Power Requirements Input Voltage: 100 - 240 VAC
Input Current: 2.5A
Dimensions 240 mm x 166 mm X 72 mm
8.42 in. x 5.90 in. x 2.75 in
Weight 2.9Kg
Indicators No LED indicators
Connectors Shielded RJ-45, EIA 568A and 568B
SFP Cage
Environmental Conditions
Operating Ambient Temperature:
-40ºF to 122ºF (-40ºC to 50ºC) for 150 W
Operating Humidity:
Maximum 90%, Non-condensing
Storage Temperature:
-40ºF to 185ºF (–40ºC to 85ºC)
Storage Humidity:
Maximum 95%, Non-condensing
Operating Altitude:
Up to 6,560 ft. (2000 m)
Weather Rating:
IP66, NEMA 4X
Reliability MTBF: 200,000 hrs. @25ºC
Thermal Rating 41 BTU/Hr (@240VAC)
Warranty 1-year
Regulatory Compliance IEEE 802.3at (PoE), RoHS Compliant,
WEEE Compliant, CE
Electromagnetic Emission & Immunity
FCC Part 15, Class B
EN 55022 Class B
EN 55024, EN61000-4-5 Class 5
(6kV CM)
VCCI
Surge Protection
Meets Surge Protection as specied in
GR-1089-CORE Issue 4
ITU-T K.20 6 kV on AC lines
Safety Approvals UL60950-1 & UL60950-22
GS Mark
Other Standards and Approvals Dust and water intrusion: IEC60529,
Level IP66; NEMA 250
Specications
PDS-104GO
4+1 Outdoor Switch, 60W per port, Managed PoE, AC Input
Ordering Information
Part Number Name Description
PDS-104GO/AC Microsemi 104GO 4+1 PoE Outdoor Switch
PD-OUT/MBK/S Microsemi OUT/MBK/G Mounting brackets for outdoor unit
Management Capabilities
Feature Description
System Network
Management Capabilities
Web Interface – used to view unit PoE & Network status, unit conguration and view unit production
information.
SNMP v2/v3 – Monitor unit over the network (MIB-II RFC1213), monitor / congure unit PoE capabilities
(RFC3621).
Telnet – used to view unit PoE & Network status, unit conguration and production information. Software
update,
Enable/Disable PoE functionality, ping remote Network device for connectivity test.
SNMP Traps – used to report various PoE events as PoE PD insertion/removal.
SysLog – used to report PoE events, Invalid remote user access, initial DHCPv4/v6 address, etc.
Ethernet Switch Network
Capabilities
10M/100M/1000Mbit Half Duplex / Full Duplex Ethernet speed.
8K internal MAC address lookup engine.
Auto MDIX
Jumbo frames
PoE Capabilities
IEEE 802.3at – delivers up to 60 Watts per port – View and statues.
PoE Enable/Disable – Enable/ Disable PoE ports Power output (Ethernet data is always enabled).
Weekly Schedule – Automatic activation/deactivation of PoE ports based on time of day.
Remote device reset – Turning temporary device power o and back on resets attached PD device.
Conguration Options
Web based: Via a WEB browser
SNMPv1/2c/3: Via an SNMP management application on a remote computer
Telnet: Via a Telnet application on a remote computer
Security and User
Authentication Web, Telnet, SNMPv2 and SNMPv3
PDS-104GO
4+1 Outdoor Switch, 60W per port, Managed PoE, AC Input
PDS-104GO_DS Rev. 1.0 09-15
4+1 PoE Outdoor Switch
Microsemi Corporation (Nasdaq: MSCC) oers a comprehensive portfolio of semiconductor and system solutions for communica-
tions, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog
mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and pre-
cise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete components; security tech-
nologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services.
Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,400 employees globally. Learn more at www.microsemi.com.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
©2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and
service marks are the property of their respective owners.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products,
alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine
suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely
with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information.
Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
