SN74AVC2T245RSWR - Texas Instruments

VCCA

VCCB

DIR2

GND

DIR1

10 3

1 2

SN74AVC2T245

www.ti.com

SCES692A –JUNE 2008–REVISED MAY 2012

DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER

WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

Check for Samples: SN74AVC2T245

1FEATURES

• Each Channel Has Independent Direction • ESD Protection Exceeds JESD 22

Control – 5000-V Human-Body Model (A114-A)

• Control Inputs VIH/VIL Levels Are Referenced to – 200-V Machine Model (A115-A)

VCCA Voltage – 1500-V Charged-Device Model (C101)

• Fully Configurable Dual-Rail Design Allows

Each Port to Operate Over the Full 1.2-V to 3.6- RSW PACKAGE

V Power-Supply Range (TOP VIEW)

• I/Os Are 4.6-V Tolerant

• Ioff Supports Partial-Power-Down Mode

Operation

• Typical Data Rates

– 500 Mbps (1.8-V to 3.3-V Translation)

– 320 Mbps (<1.8-V to 3.3-V Translation)

– 320 Mbps (Translate to 2.5 V or 1.8 V)

– 280 Mbps (Translate to 1.5 V)

– 240 Mbps (Translate to 1.2 V)

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

DESCRIPTION/ORDERING INFORMATION

This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is

designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track

VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional

translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.

ORDERING INFORMATION

TAPACKAGE(1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING

–40°C to 85°C QFN – RSW Tape and reel SN74AVC2T245RSWR TQ_

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

DIR1

SN74AVC2T245

SCES692A –JUNE 2008–REVISED MAY 2012

www.ti.com

DESCRIPTION/ORDERING INFORMATION (CONTINUED)

The SN74AVC2T245 is designed for asynchronous communication between two data buses. The logic levels of

the direction-control (DIR) input and the output-enable (OE) activate either the B-port outputs or the A-port

outputs or place both output ports into the high-impedance mode . The device transmits data from the A bus to

the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are

activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level

applied to prevent excess ICC and ICCZ.

The SN74AVC2T245 is designed so that the control pins (DIR1, DIR2, and OE) are supplied by VCCA.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.

The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE must be connected to VCC through a

pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

FUNCTION TABLE(1)

(EACH TRANSCEIVER)

CONTROL INPUTS OUTPUT CIRCUITS OPERATION

OE DIR1 A PORT B PORT

L L Enabled Hi-Z B data to A data

L H Hi-Z Enabled A data to B data

H X Hi-Z Hi-Z Isolation

(1) Input circuits of the data I/Os are always active.

LOGIC DIAGRAM (POSITIVE LOGIC)

(1) Shown for a single channel

Product Folder Link(s): SN74AVC2T245

1.8 V

1 kΩ

3.0 V

Processor

UART

Peripheral

DIR1

VCCA VCCB

GND

DIR2

SN1203086

SN74AVC2T245

www.ti.com

SCES692A –JUNE 2008–REVISED MAY 2012

TYPICAL APPLICATION

Figure 1. Typical Application of the SN74AVC2T245

ABSOLUTE MAXIMUM RATINGS(1)

over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT

VCCA Supply voltage range –0.5 4.6 V

VCCB I/O ports (A port) –0.5 4.6

VIInput voltage range(2) I/O ports (B port) –0.5 4.6 V

Control inputs –0.5 4.6

A port –0.5 4.6

Voltage range applied to any output in the high-impedance or

VOV

power-off state(2) B port –0.5 4.6

A port –0.5 VCCA + 0.5

VOVoltage range applied to any output in the high or low state(2) (3) V

B port –0.5 VCCB + 0.5

IIK Input clamp current VI< 0 –50 mA

IOK Output clamp current VO< 0 –50 mA

IOContinuous output current ±50 mA

Continuous current through VCCA, VCCB, or GND ±100 mA

D package(4) 73

DB package(4) 82

θJA Package thermal impedance DGV package(4) 120 °C/W

PW package(4) 108

RGY package(5) 39

Tstg Storage temperature range –65 150 °C

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed.

(4) The package thermal impedance is calculated in accordance with JESD 51-7.

(5) The package thermal impedance is calculated in accordance with JESD 51-5.

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

SCES692A –JUNE 2008–REVISED MAY 2012

www.ti.com

RECOMMENDED OPERATING CONDITIONS(1) (2) (3)

VCCI VCCO MIN MAX UNIT

VCCA Supply voltage 1.2 3.6 V

VCCB Supply voltage 1.2 3.6 V

1.2 V to 1.95 V VCCI × 0.65

High-level

VIH Data inputs(4) 1.95 V to 2.7 V 1.6 V

input voltage 2.7 V to 3.6 V 2

1.2 V to 1.95 V VCCI × 0.35

Low-level

VIL Data inputs(4) 1.95 V to 2.7 V 0.7 V

input voltage 2.7 V to 3.6 V 0.8

1.2 V to 1.95 V VCCA × 0.65

High-level DIR

VIH 1.95 V to 2.7 V 1.6 V

input voltage (referenced to VCCA)(5) 2.7 V to 3.6 V 2

1.2 V to 1.95 V VCCA × 0.35

Low-level DIR

VIL 1.95 V to 2.7 V 0.7 V

input voltage (referenced to VCCA)(5) 2.7 V to 3.6 V 0.8

VIInput voltage 0 3.6 V

Active state 0 VCCO

VOOutput voltage V

3-state 0 3.6

1.1 V to 1.2 V –3

1.4 V to 1.6 V –6

IOH High-level output current 1.65 V to 1.95 V –8 mA

2.3 V to 2.7 V –9

3 V to 3.6 V –12

1.1 V to 1.2 V 3

1.4 V to 1.6 V 6

IOL Low-level output current 1.65 V to 1.95 V 8 mA

2.3 V to 2.7 V 9

3 V to 3.6 V 12

Δt/Δv Input transition rise or fall rate 5 ns/V

TAOperating free-air temperature –40 85 °C

(1) VCCI is the VCC associated with the input port.

(2) VCCO is the VCC associated with the output port.

(3) All unused data inputs of the device must be held at VCCI or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

(4) For VCCI values not specified in the data sheet, VIH min = VCCI × 0.7 V, VIL max = VCCI × 0.3 V

(5) For VCCI values not specified in the data sheet, VIH min = VCCA × 0.7 V, VIL max = VCCA × 0.3 V

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

www.ti.com

SCES692A –JUNE 2008–REVISED MAY 2012

ELECTRICAL CHARACTERISTICS(1) (2)

over recommended operating free-air temperature range (unless otherwise noted)

TA= 25°C –40°C to 85°C

PARAMETER TEST CONDITIONS VCCA VCCB UNIT

MIN TYP MAX MIN MAX

IOH = –100 μA 1.2 V to 3.6 V 1.2 V to 3.6 V VCCO – 0.2

IOH = –3 mA 1.2 V 1.2 V 0.95

IOH = –6 mA 1.4 V 1.4 V 1.05

VOH VI= VIH V

IOH = –8 mA 1.65 V 1.65 V 1.2

IOH = –9 mA 2.3 V 2.3 V 1.75

IOH = –12 mA 3 V 3 V 2.3

IOL = 100 μA 1.2 V to 3.6 V 1.2 V to 3.6 V 0.2

IOL = 3 mA 1.2 V 1.2 V 0.25

IOL = 6 mA 1.4 V 1.4 V 0.35

VOL VI= VIL V

IOL = 8 mA 1.65 V 1.65 V 0.45

IOL = 9 mA 2.3 V 2.3 V 0.55

IOL = 12 mA 3 V 3 V 0.7

Control

IIVI= VCCA or GND 1.2 V to 3.6 V 1.2 V to 3.6 V ±0.025 ±0.25 ±1 μA

inputs 0 V 0 V to 3.6 V ±0.1 ±1 ±5

Ioff A or B port VIor VO= 0 to 3.6 V μA

0 V to 3.6 V 0 V ±0.1 ±1 ±5

VO= VCCO or GND,

IOZ A or B port 3.6 V 3.6 V ±0.5 ±2.5 ±5 μA

VI= VCCI or GND, OE = VIH 1.2 V to 3.6 V 1.2 V to 3.6 V 8

ICCA VI= VCCI or GND, IO= 0 0 V 0 V to 3.6 V –2 μA

0 V to 3.6 V 0 V 8

1.2 V to 3.6 V 1.2 V to 3.6 V 8

ICCB VI= VCCI or GND, IO= 0 0 V 0 V to 3.6 V 8 μA

0 V to 3.6 V 0 V –2

ICCA + ICCB VI= VCCI or GND, IO= 0 1.2 V to 3.6 V 1.2 V to 3.6 V 16 μA

Control

CiVI= 3.3 V or GND 3.3 V 3.3 V 3.5 4.5 pF

inputs

Cio A or B port VO= 3.3 V or GND 3.3 V 3.3 V 6 7 pF

(1) VCCO is the VCC associated with the output port.

(2) VCCI is the VCC associated with the input port.

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

SCES692A –JUNE 2008–REVISED MAY 2012

www.ti.com

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, VCCA = 1.2 V (unless otherwise noted) (see Figure 2)

VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

VCCB = 1.2 V

FROM TO ± 0.1 V ± 0.15 V ± 0.2 V ± 0.3 V

PARAMETER UNIT

(INPUT) (OUTPUT) TYP TYP TYP TYP TYP

tPLH 2.5 2.1 1.9 1.9 1.9

A B ns

tPHL 2.5 2.1 1.9 1.9 1.9

tPLH 2.5 2.2 2 1.8 1.7

B A ns

tPHL 2.5 2.2 2 1.8 1.7

tPZH 3.8 3.1 2.7 2.6 3

OE A ns

tPZL 3.8 3.1 2.7 2.6 3

tPZH 3.7 3.7 3.7 3.7 3.7

OE B ns

tPZL 3.7 3.7 3.7 3.7 3.7

tPHZ 4.4 3.6 3.5 3.3 4.1

OE A ns

tPLZ 4.4 3.6 3.5 3.3 4.1

tPHZ 4.2 4.2 4.3 4.1 4.2

OE B ns

tPLZ 4.2 4.2 4.3 4.1 4.2

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, VCCA = 1.5 V ± 0.1 V (see Figure 2)

VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

VCCB = 1.2 V

FROM TO ± 0.1 V ± 0.15 V ± 0.2 V ± 0.3 V

PARAMETER UNIT

(INPUT) (OUTPUT) TYP MIN MAX MIN MAX MIN MAX MIN MAX

tPLH 2.2 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9

A B ns

tPHL 2.2 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9

tPLH 2 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5

B A ns

tPHL 2 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5

tPZH 3.4 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4

OE A ns

tPZL 3.4 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4

tPZH 2.5 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2

OE B ns

tPZL 2.5 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2

tPHZ 4.1 1.2 7.1 0.8 6.7 0.4 5.6 1 74

OE A ns

tPLZ 4.1 1.2 7.1 0.8 6.7 0.4 5.6 1 7.4

tPHZ 3.3 0.3 7.4 0.2 5.7 0.3 5.6 0.3 5.6

OE B ns

tPLZ 3.3 0.3 7.4 0.2 5.7 0.3 5.6 0.3 5.6

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

www.ti.com

SCES692A –JUNE 2008–REVISED MAY 2012

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, VCCA = 1.8 V ± 0.15 V (see Figure 2)

VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

VCCB = 1.2 V

FROM TO ± 0.1 V ± 0.15 V ± 0.2 V ± 0.3 V

PARAMETER UNIT

(INPUT) (OUTPUT) TYP MIN MAX MIN MAX MIN MAX MIN MAX

tPLH 2 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3

A B ns

tPHL 2 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3

tPLH 1.9 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7

B A ns

tPHL 1.9 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7

tPZH 3.2 0.8 6.7 0.4 5.8 0.4 4.8 0.3 4.6

OE A ns

tPZL 3.2 0.8 6.7 0.4 5.8 0.4 4.8 0.3 4.6

tPZH 1.9 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7

OE B ns

tPZL 1.9 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7

tPHZ 3.8 0.7 6.2 0.3 6.5 0.1 5.2 0.8 6.5

OE A ns

tPLZ 3.8 0.7 6.2 0.3 6.5 0.1 5.2 0.8 6.5

tPHZ 3.4 0.1 6.8 0.1 6.8 0.1 6.7 0.1 6.7

OE B ns

tPLZ 3.4 0.1 6.8 0.1 6.8 0.1 6.7 0.1 6.7

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, VCCA = 2.5 V ± 0.2 V (see Figure 2)

VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

VCCB = 1.2 V

FROM TO ± 0.1 V ± 0.15 V ± 0.2 V ± 0.3 V

PARAMETER UNIT

(INPUT) (OUTPUT) TYP MIN MAX MIN MAX MIN MAX MIN MAX

tPLH 1.9 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6

A B ns

tPHL 1.9 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6

tPLH 1.8 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6

B A ns

tPHL 1.8 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6

tPZH 3.1 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6

OE A ns

tPZL 3.1 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6

tPZH 1.4 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5

OE B ns

tPZL 1.4 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5

tPHZ 3.6 0.2 5.2 0.1 5.4 0.1 4.5 0.7 6

OE A ns

tPLZ 3.6 0.2 5.2 0.1 5.4 0.1 4.5 0.7 6

tPHZ 2.1 0.1 4.7 0.1 4.6 0.1 4.7 0.1 4.7

OE B ns

tPLZ 2.1 0.1 4.7 0.1 4.6 0.1 4.7 0.1 4.7

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

SCES692A –JUNE 2008–REVISED MAY 2012

www.ti.com

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, VCCA = 3.3 V ± 0.3 V (see Figure 2)

VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

VCCB = 1.2 V

FROM TO ± 0.1 V ± 0.15 V ± 0.2 V ± 0.3 V

PARAMETER UNIT

(INPUT) (OUTPUT) TYP MIN MAX MIN MAX MIN MAX MIN MAX

tPLH 1.8 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4

A B ns

tPHL 1.8 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4

tPLH 1.9 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3

B A ns

tPHL 1.9 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3

tPZH 3.1 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3

OE A ns

tPZL 3.1 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3

tPZH 1.2 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6

OE B ns

tPZL 1.2 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6

tPHZ 3.4 0.1 4.6 0.1 4.7 0.3 4.8 0.7 4.5

OE A ns

tPLZ 3.4 0.1 4.6 0.1 4.7 0.3 4.8 0.7 4.5

tPHZ 2.9 0.1 5.4 0.1 5.3 0.1 5.3 0.1 5.3

OE B ns

tPLZ 2.9 0.1 5.4 0.1 5.3 0.1 5.3 0.1 5.3

OPERATING CHARACTERISTICS

TA= 25°C VCCA = VCCA = VCCA = VCCA = VCCA =

TEST VCCB = 1.2 V VCCB = 1.5 V VCCB = 1.8 V VCCB = 2.5 V VCCB = 3.3 V

PARAMETER UNIT

CONDITIONS TYP TYP TYP TYP TYP

Outputs 3 3 3 3 4

enabled

A to B Outputs 1 1 1 2 2

CL= 0,

disabled

CpdA (1) f = 10 MHz, pF

Outputs tr= tf= 1 ns 12 13 13 15 15

enabled

B to A Outputs 1 2 2 2 2

disabled

Outputs 12 13 13 14 16

enabled

A to B Outputs 1 2 2 2 2

CL= 0,

disabled

CpdB (1) f = 10 MHz, pF

Outputs tr= tf= 1 ns 3 3 3 4 4

enabled

B to A Outputs 1 1 1 2 2

disabled

(1) Power dissipation capacitance per transceiver

Product Folder Link(s): SN74AVC2T245

VOH

VOL

From Output

Under Test

(see Note A)

LOAD CIRCUIT

2 × VCCO

Open

GND

tPLH tPHL

Output

Control

(low-level

enabling)

Output

Waveform 1

S1 at 2 × VCCO

(see Note B)

Output

Waveform 2

S1 at GND

(see Note B)

tPZL

tPZH

tPLZ

tPHZ

VCCA/2VCCA/2

VCCI/2 VCCI/2

VCCI

0 V

VCCO/2 VCCO/2

VOH

VOL

0 V

VCCO/2 VOL + VTP

VCCO/2 VOH − VTP

0 V

VCCI

0 V

VCCI/2 VCCI/2

Input

VCCA

VCCO

VOLTAGE WAVEFORMS

PROPAGATION DELAY TIMES

VOLTAGE WAVEFORMS

PULSE DURATION

VOLTAGE WAVEFORMS

ENABLE AND DISABLE TIMES

Output

Input

tpd

tPLZ/tPZL

tPHZ/tPZH

Open

2 × VCCO

GND

TEST S1

NOTES: A. CLincludes probe and jig capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.

C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO= 50 Ω, dv/dt ≥1 V/ns.

D. The outputs are measured one at a time, with one transition per measurement.

E. tPLZ and tPHZ are the same as t

dis.

F. tPZL and tPZH are the same as t

en.

G. tPLH and tPHL are the same as t

pd.

H. VCCI is the VCC associated with the input port.

I. VCCO is the VCC associated with the output port.

1.8 V ± 0.15 V 2 kΩ

2 kΩ

VCCO RL

0.15 V

0.3 V

VTP

15 pF

3.0 V to 3.75 V

SN74AVC2T245

www.ti.com

SCES692A –JUNE 2008–REVISED MAY 2012

PARAMETER MEASUREMENT INFORMATION

Figure 2. Load and Circuit and Voltage Waveforms

Product Folder Link(s): SN74AVC2T245

SN74AVC2T245

SCES692A –JUNE 2008–REVISED MAY 2012

www.ti.com

REVISION HISTORY

Changes from Original (June 2008) to Revision A Page

• Updated TOP-SIDE MARKING in the ORDERING INFORMATION table. .......................................................................... 1

Product Folder Link(s): SN74AVC2T245

PACKAGE OPTION ADDENDUM

www.ti.com 17-May-2012

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

SN74AVC2T245RSWR ACTIVE UQFN RSW 10 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

SN74AVC2T245RSWR UQFN RSW 10 3000 180.0 8.4 1.59 2.09 0.72 4.0 8.0 Q1

SN74AVC2T245RSWR UQFN RSW 10 3000 179.0 8.4 1.7 2.1 0.7 4.0 8.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 17-May-2012

Pack Materials-Page 1

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

SN74AVC2T245RSWR UQFN RSW 10 3000 202.0 201.0 28.0

SN74AVC2T245RSWR UQFN RSW 10 3000 203.0 203.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 17-May-2012

Pack Materials-Page 2

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should

obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are

sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,

or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information

published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual

property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive

business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all

express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not

responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably

be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing

such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products

and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be

provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in

such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at

the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are

designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated

products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP®Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Mobile Processors www.ti.com/omap

Wireless Connectivity www.ti.com/wirelessconnectivity

TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265