BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
MODULAR PLUGS,
ACCESSORIES
AND TOOLING
4th Edition Introducing the New Universal Contact
PAGE 3
CAT 6A, CAT 6 and CAT 5EMT Modular Plugs
These modular plugs consist of a three-piece design: the modular plug body
with contacts; a wire holder to manage the conductors and ensure performance
and; a metal strain relief for securing the cable and if used with a shielded cable
provides the shielding for the plug. These plugs can be used with shielded or
unshielded cables. They are available with 3 dierent size strain reliefs to handle
the range of cable diameters. Each performance level uses slightly dierent wire
holders to achieve the desired performance levels. All three of these plug types
utilize the 2153256-1 or 2153257-1 series plug boots. They utilize the Pro-Crimper
III Hand Tool (354940-1) with the appropriate die set based on strain relief
diameter or Dual Terminator (1320840) with terminating module (791804-X).
CAT 5E, 8-Position Plug
The CAT 5E Modular Plug is a two-piece design consisting of the modular plug
body with contacts, and a load bar or wire holder. In this design the strain relief
is built into the plug body. If the shielded option is desired, the plug comes with
a factory installed wrap around shield. This plug utilizes the 569875, 569876 or
569877 series boot depending upon cable diameter. It utilizes the Pro-Installer
tool with the “White” dot die set or Dual Terminator (1320840) with terminating
module (1-856196-1).
CAT 5, 8-Position Modular Plug
The CAT 5, 8-position plug is a one-piece design. The plug is also available for
use with “round” cable as well as “flat oval” cable. Additionally, it is available in
unshielded and shielded utilizing a wrap-around shield. This plug utilizes the
same boots as the CAT 5E and the Pro-Installer tool with the “Black” dot
die set or Dual Terminator (1320840) with terminating module (856196-2).
6-Position Modular Plug
The 6-position (RJ-11) modular plug is also a one-piece design and is oered in
a “standard” design 0.530 inches long and also a “long” version which is 0.895
inches long. The plug is available for round as well as flat oval cable. It is
available in unshielded and shielded versions. The 6-postion plug has a unique
variety called “small conductor” for use with conductors with thin-wall insulation
and overall diameter of 0.029 to 0.034 inches. Lastly, the 6-position plug is
available with only 4 or 2 contacts installed. This plug utilizes the Pro-Installer
tool with the “standard” plug using the “Blue” dot die set and the “long” using
the “Violet” dot die set or Dual Terminator (1320840) with terminating module
(856196-1 or -4).
4-Position Modular Plug
The 4-position (telephone handset) modular plug is a one-piece design and is
0.530 inches long and is designed for use with flat-oval cables. It is only available
as unshielded. The plug utilizes the “Green” dot die set with the Pro-Installer Tool
or Dual Terminator (1320840) with terminating module (856196-3).
TE CONNECTIVITY MODULAR PLUG PORTFOLIO
TE Connectivity oers a vast portfolio of Modular Plugs
for a wide variety of applications, performance and cable
and conductor styles. Below is a brief explanation of the
basics of this portfolio to assist in proper plug selection.
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
FEATURES AND BENEFITS
• True mass displacement termination of jacketed cable with solid or stranded conductors
• New Universal contact providing reliable termination of solid or stranded conductors
• Available in all performance grades: CAT 6A, CAT 6, CAT 5E, CAT 5 and CAT 3
• Meets or exceeds EIA/TIA and ISO industry performance and specifications
• Various positions, number of contacts, housing styles and packaging options available
• The most complete line of semiautomatic and manual termination capabilities and tooling – low
applied cost
• Complete line of hand-held tooling available
• Available for shielded and unshielded cable, round or flat oval, various cable diameters accommodated
• Complete line of accessories such as boots and strain reliefs
• Recognized by Underwriters Laboratories Inc, File # E81956
• Certified by Canadian Standards Association Certificate No LR 7189A
SPECIFICATIONS1
Electrical
Voltage: 150 volts AC maximum
Current: Signal application only, 0.75 ampere maximum
Voltage Proof: 1000 volts AC between contacts
1500 volts AC all contacts connected together with shield
Insulation Resistance: 500 Mega ohms minimum
Mechanical
Durability: 750 mating cycles
Bending: 22N [5 lbs]
Pull (Tensile): 22N [5 lbs]
Flex: 50 cycles (solid conductors) or 250 cycles (stranded conductors)
Torsion: 10N [2.2 lbs]
Environmental
Temperature rating: -10°C to +60°C
Rapid Temperature: -40°C to 70°C
Cyclic Damp Heat: 25°C to 65°C @ 93%RH
Mixed Flow Gas: IEC 60512-11-7 Method 1
Product Specifications:
108-131011 Non-Category Modular Plugs (MP-88, MP-66, MP-44 and MP-1010)
108-131012 Category 6 Modular Plugs (MP-6)
108-131013 Category 6A Modular Plugs (MP-6A)
108-131014 Category 5e Modular Plugs (MP-5E and MP-5EMT)
1 Consult Product Specification, 108 documents, for exact test conditions and requirements.
PAGE 5
Modular Plugs, Accessories and Tooling
CAT 6A, Shielded, 8-Position Plug (MP-6AS-_-_)
FEATURES
• Each kit includes:
(1) Modular plug assembly
(1) Wire holder
(1) Strain relief
• Cat 6A performance achievable when used with PiMF (Pairs-in-Metal-Foil)
constructed cable
• Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Jack OD 500 Per Bag 100 Per Bag
Shielded CAT 6A 23-24 Solid
24-26 Stranded
0.035” to 0.043”
(0.89 to 1.09 mm)
0.20” to 0.24”
(5.1 to 6.0 mm)
MP-6AS-B-5
(6-2111981-2)
MP-6AS-B-1
(6-2111981-3)
0.22” to 0.28”
(5.7 to 7.0 mm)
MP-6AS-C-5
(6-2111984-2)
MP-6AS-C-1
(6-2111984-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
CAT 6, Shielded, 8-Position Plug (MP-6S-_-_)
FEATURES
• Each kit includes:
(1) Modular plug assembly
(1) Wire holder
(1) Strain relief
• Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Jack OD 500 Per Bag 100 Per Bag
Shielded CAT 6 23-24 Solid
24-26 Stranded
0.035” to 0.043”
(0.89 to 1.09 mm)
0.18” to 0.22”
(4.7 to 5.5 mm)
MP-6S-A-5
(6-2111977-2)
MP-6S-A-1
(6-2111977-3)
0.20” to 0.24”
(5.1 to 6.0 mm)
MP-6S-B-5
(6-2111979-2)
MP-6S-B-1
(6-2111979-3)
0.22” to 0.28”
(5.7 to 7.0 mm)
MP-6S-C-5
(6-2111989-2)
MP-6S-C-1
(6-2111989-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
Shielded Slim-Line Modular Plug Boot (MP-Boot-S-SL-_)
FEATURES
• For use with Category 6A/6 and Category 5e EMT modular plugs
• Accepts cables with maximum diameters listed
• Slim-line design support high-density applications
• Transparent boot eliminates need for colored boots to match cable jacket color
• Advised to use the smallest boot size possible that will accommodate cable
ORDERING INFORMATION
Description Cable Jack OD 1000 Per Bag
Shielded Slim-Line Boot
0.18” to 0.24”
(4.7 to 6.0 mm)
MP-Boot-S-SL-AB
(2153256-1)
0.22” to 0.28”
(5.7 to 7.0 mm)
MP-Boot-S-SL-C
(2153257-1)
CAT 5E, Shielded EMT, 8-Position Plug (MP-5EMT-_-_)
FEATURES
• Each kit includes:
(1) Modular plug assembly
(1) Wire holder
(1) Strain relief
• Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Jack OD 500 Per Bag 100 Per Bag
Shielded EMT
CAT 5E
23-24 Solid
24-26 Stranded
0.035” to 0.043”
(0.89 to 1.09 mm)
0.18” to 0.22”
(4.7 to 5.5 mm)
MP-5EMT-A-5
(6-2111976-2)
MP-5EMT-A-1
(6-2111976-3)
0.20” to 0.24”
(5.1 to 6.0 mm)
MP-5EMT-B-5
(6-2111986-2)
MP-5EMT-B-1
(6-2111986-3)
0.22” to 0.28”
(5.7 to 7.0 mm)
MP-5EMT-C-5
(6-2111988-2)
MP-5EMT-C-1
(6-2111988-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
PAGE 7
Modular Plugs, Accessories and Tooling
CAT 5E, 8-Position Plug (MP-5E_-_)
FEATURES
• In-line load bar and wrap-around shield for shielded plugs - Uses Category 5e Boots
• Each kit includes
(1) Modular plug assembly
(1) Wire holder
• Use appropriate size CAT 5E modular plug boot for cable diameter
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Jack OD 500 Per Bag 100 Per Bag
Unshielded CAT 5E 23-24 Solid
24-26 Stranded
0.035” to 0.039”
(0.89 to 0.99 mm)
0.19” to 0.22”
(4.8 to 5.6 mm)
MP-5EU-5
(6-569278-2)
MP-5EU-1
(6-569278-3)
Shielded CAT 5E MP-5ES-5
(6-569550-2)
MP-5ES-1
(6-569550-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
Modular Plug Snagless Boots for Category 5E and 5 Plugs
FEATURES
• For use with Category 5e and 5, 8-position plugs
• Three (3) boot sizes for various maximum cable diameters
• 1000 boots per box
ORDERING INFORMATION
Color Max Cable Diameter
0.210" (5.33 mm)
Max Cable Diameter
0.225" (5.71 mm)
Max Cable Diameter
0.250" (6.35 mm)
Black 569875-1 569876-1 569877-1
Almond 569875-2 569876-2 569877-2
Red 569875-3 569876-3 569877-3
Green 569875-4 569876-4 569877-4
Blue 569875-5 569876-5 569877-5
Yellow 569875-6 569876-6 569877-6
Orange 569875-7 569876-7 569877-7
White 569875-8 569876-8 569877-8
Violet 569875-9 569876-9 569877-9
Gray 1-569875-0 1-569876-0 1-569877-0
Slim-Line Modular Plug Boot
ORDERING INFORMATION
Description Max Cable Diameter Part Number
Slim-LineModularPlugBootClear (mm) -
Modular Plug Non-Snagless Boots for Category 5E and 5 Plugs
ORDERING INFORMATION
Color Max Cable Diameter
0.240" (6.1 mm)
Black 558211-1
Almond 558211-2
Red 558211-3
Green 558211-4
Blue 558211-5
Color Max Cable Diameter
0.240" (6.1 mm)
Yellow 558211-6
Orange 558211-7
White 558211-8
Violet 558211-9
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
External Strain Reliefs for Modular Plugs
FEATURES
• Metal strain relief that positively engages plug housing
• PRO-CRIMPER Tool and Die Set reference will be noted in tooling section
• For use with 8-position Category 5 and 5e Modular Plugs only
• RoHS compliant
ORDERING INFORMATION
Description Part Number
Not for use with Modular Plug Boots 558527-1
For use with Modular Plug Boots 558527-3
CAT 5 and 3, 8-Position Plug (MP-88_-_-_)
FEATURES
• Each Kit includes
(1) Modular plug assembly
• Packaged either 500 or 100 to bag
• Use appropriate size modular plug boot for cable diameter
ORDERING INFORMATION
Description
Conductor
(AWG)1Insulation OD Cable Type
Cable Jack
OD (Max) 500 Per Bag 100 Per Bag
Unshielded
8-Position
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm)
Round 0.20”
(5.1 mm)
MP-88U-R-5
(6-557315-2)
MP-88U-R-1
(6-557315-3)
Flat Oval 0.10” x 0.35”
(2.54 x 8.89 mm)
MP-88U-F-5
(6-554720-2)
MP-88U-F-1
(6-554720-3)
Shielded
8-Position
Round 0.20”
(5.1 mm)
MP-88S-R-5
(6-569530-2)
MP-88S-R-1
(6-569530-3)
Flat Oval 0.10” x 0.35”
(2.54 x 8.89 mm)
MP-88S-F-5
(6-569542-2)
MP-88S-F-1
(6-569542-3)
Unshielded
8-Position,
Small
Conductor
26-28 Solid
26-28 Stranded
0.029” to 0.034”
(0.74 to 0.86 mm)
Round 0.20”
(5.1 mm)
MP-88U-RS-5
(6-557961-2)
MP-88U-RS-1
(6-557961-3)
Flat Oval 0.10” x 0.35”
(2.54 x 8.89 mm)
MP-88U-FS-5
(6-557972-2)
MP-88U-FS-1
(6-557972-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
8-Position
Round, Standard
Shielded 8-Position
Round, Standard
8-Position
Flat, Standard
PAGE 9
Modular Plugs, Accessories and Tooling
Keyed CAT 5 and 3, 8-Position (MP-88_-R-1-K)
Small key on side of plug to interface with slot in jack.
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Type Cable Jack OD (Max) 100 Per Bag
Unshielded Keyed,
8-Position 24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm) Round 0.20”
(5.1 mm)
MP-88U-R-1-K
(6-554170-3)
Shielded Keyed,
8-Position
MP-88S-R-1-K
(6-569533-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
6-Position Plugs (MP-66_-_-_)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Type Cable Jack OD (Max) 500 Per Bag 100 Per Bag
Unshielded
6-Position,
Standard Body
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm)
Round 0.18”
(4.6 mm)
MP-66U-R-5
(6-554710-2)
MP-66U-R-1
(6-554710-3)
Flat Oval 0.09” x 0.26”
(2.29 x 6.61 mm)
MP-66U-F-5
(6-641337-2)
MP-66U-F-1
(6-641337-3)
Unshielded
6-Position,
Long Body
Round 0.195”
(4.96 mm)
MP-66U-LR-5
(6-555177-2)
MP-66U-LR-1
(6-555177-3)
Flat Oval 0.11” x 0.27”
(2.79 x 6.85 mm)
MP-66U-LF-5
(6-555176-2)
MP-66U-LF-1
(6-555176-3)
Shielded
6-Position,
Long Body
Round 0.195”
(4.96 mm)
MP-66S-LR-5
(6-555175-2)
MP-66S-LR-1
(6-555175-3)
Flat Oval 0.11” x 0.27”
(2.79 x 6.85 mm)
MP-66S-LF-5
(6-555174-2)
MP-66S-LF-1
(6-555174-3)
Unshielded
6-Position, Small
Conductor,
Standard Body
26-28 Solid
26-28 Stranded
0.029” to 0.034”
(0.74 to 0.86 mm) Flat Oval 0.09” x 0.26”
(2.29 x 6.61 mm)
MP-66U-FS-5
(6-557971-2)
MP-66U-FS-1
(6-557971-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
6-Position,
Round, Standard
6-Position,
Round, Long
6-Position,
Flat, Standard
PAGE 11
Modular Plugs, Accessories and Tooling
6-Position, 4- or 2-Contact Plugs (MP-6_ _-_-_)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Type Cable Jack OD (Max) 500 Per Bag 100 Per Bag
Unshielded
6-Position,
4-Contacts
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm)
Flat Oval 0.09” x 0.26”
(2.29 x 6.61 mm)
MP-64U-F-5
(6-641335-2)
MP-64U-F-1
(6-641335-3)
26-28 Solid
26-28 Stranded
0.029” to 0.034”
(0.74 to 0.86 mm)
MP-64U-FS-5
(6-557965-2)
MP-64U-FS-1
(6-557965-3)
Unshielded
6-Position,
2-Contacts
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm)
MP-62U-F-5
(6-641333-2)
MP-62U-F-1
(6-641333-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
4-Position Plug (MP-44U-_-_)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Type Cable Jack OD (Max) 500 Per Bag 100 Per Bag
Unshielded
4-Position,
Headset
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm)
Round 0.11”
(2.8 mm)
MP-44U-R-5
(6-569031-2)
MP-44U-R-1
(6-569031-3)
Flat Oval 0.09” x 0.19”
(2.29 x 4.83 mm)
MP-44U-F-5
(6-641334-2)
MP-44U-F-1
(6-641334-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
10-Position Plug (MP-1010U-R-_)
ORDERING INFORMATION
Description Conductor (AWG)1Insulation OD Cable Type Cable Jack OD (Max) 500 Per Bag 100 Per Bag
Unshielded
10-Position
24-26 Solid
24-26 Stranded
0.034” to 0.039”
(0.86 to 0.99 mm) Round 0.21”
(5.3 mm)
MP1010U-R-5
(6-557963-2)
MP1010U-R-1
(6-557963-3)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
Base Terminator: 1320840-1 (115 Vac, 60 Mhz)
ModPlug Dual Terminator Fast Facts
FEATURES
• Pneumatically powered, foot pedal actuated
• Terminate two connectors at the same time
• Programmable tester — Check for shorts and opens as product is
terminated. Program tester for individual positions or crossovers.
• Terminate up to 200 dual-ended cables/hr
• Interchangeable die sets — Easy changeover die sets for your
particular product. Die sets have been designed to terminate all
TE modular plug products
• Steel die sets for long life
• Fully adjustable, primary strain relief, secondary strain relief and
contact height
• Lightweight (36 lbs) design makes the press easy to move within
work center
• Rental and purchase options available
• Compact size — 8" x 8" x 10½" tall
• 1-year limited warranty
• TE plugs are UL approved when terminated using this tool and the
procedures outlined in CM 409-10010 and IS 408-9743
TECHNICAL REQUIREMENTS:
• Air pressure — 80 - 100 psi
• Air supply hose — 3/16 dia. with 1/8 NPT fitting
(Continued next page)
PAGE 13
Modular Plugs, Accessories and Tooling
(Continued from previous page)
Base Terminator: 1320840-1 (115 Vac, 60 Mhz)
ModPlug Dual Terminator Fast Facts
CAT 5E, 5 and 3 (4-, 6-, 8- and 10-Position) Teminating Modules*
ORDERING INFORMATION
Modular Plug Style Catalog Number Performance Rating Terminating Module
4-Position Plug (MP-44U) CAT 3 -
6-Position Plug (Standard Body) (MP-66__-__) CAT 3 -
6-Position Plug (Long Body) (MP-66__-L__) CAT 3 -
10-Position Plug (MP1010U) CAT 3, CAT 5 -
8-Position Plug (MP-88__) CAT 5 -
8-Position Plug (MP-5E__) CAT 5E --
* Base Terminator 1320840-1 required.
See Instruction Sheet 408-9743 for more information.
CAT 6A, CAT 6 and CAT 5EMT Terminating Modules*
ORDERING INFORMATION
Cable Diameter (Strain Relief) Range Catalog Number Terminating Module
0.185" to 0.216" (4.7 mm to 5.5 mm) Size “A” 791804-4
0.201" to 0.236' (5.1 mm to 6.0 mm) Size “B” 791804-1*
0.224" to 0.276" (5.7 mm to 7.0 mm) Size “C” 791804-3
* Base Terminator 1320840-1 required.
See Instruction Sheet 408-8734 for more information.
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
Base Terminator: 354711-1
ModPlug Single Terminator Fast Facts
FEATURES
• Terminate up to 250 connectors/hr
• Interchangeable steel die sets terminate all TE plugs
• Compact, low cost pneumatically designed bench unit
• Independent adjustments for insertion, primary strain relief, and secondary
strain relief depths
• Weighs only 13 lbs
• Compact size — 3½" x 8¾" x 5⅛" tall
• CE approved
• TE plugs are UL approved when terminated using this tool and the procedures
outlined in IS 408-9919
• Technical requirements:
Air pressure — 80 - 100 psi
Air supply hose — 1/8 I.D. with 1/8 NPT fitting
ORDERING INFORMATION
Modular Plug Style Catalog Number
Performance
Rating
Terminating
Module (Only)*
Terminator with
Terminating
Module**
-PositionPlug(StandardBody) (MP-44U) CAT - -
-PositionPlug(StandardBody) (MP-66__-__) CAT - -
-PositionPlug(LongBody) (MP-66__-L__) CAT - -
-PositionPlug (MP1010U) CATCAT - -
-PositionPlug (MP-88__) CAT - -
-PositionPlug (MP-5E__) CATE - -
* Base Terminator (354711-1) required if purchasing terminating modules only.
* * With tooling included.
See Instruction Sheet 408-9919 for additional information.
PAGE 15
Modular Plugs, Accessories and Tooling
Category 6A, 6 and CAT 5EMT Modular Plugs
FEATURES
• Ratchet control provides complete termination cycle
• Die set and tool crimps both the strain relief and
the modular contacts at the same time
• Interchangeable die sets accommodate all plug sizes
• Sold with or without die. Dies can be purchased separately
ORDERING INFORMATION
Cable (Strain Relief) Diameter 0.185" to 0.216"
4.7mm to 5.5 mm
Size “A”
0.201" to 0.236"
5.1 mm to 6.0 mm
Size “B”
0.224" to 0.276"
5.7mm to 7.0 mm
Size “C”
DieSetOnly - - -
ToolWithDie* - - -
HandHeldToolOnly -
* Includes 2119000-1 JacKnack Tool.
JacKnack Tool
FEATURES
• Cable jacket stripper
• Cable filler sheer
• Untwist wire pairs – controls degree of untwist and quick
• JacKnack clamp – holds untwisted pair until ready for insertion.
• Wire placement tool
• Lightweight design
• Ergonomic design – finger loop used to actuate tool
• Convenient - finger loop allows the user keep the tool on their finger
ORDERING INFORMATION
Description Part Number Instruction Sheet
JacKnackTool --
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
Pro-Installer's Modular Plug Hand Tool
FEATURES
• Ratchet control provides complete termination cycle
• Sold with and without die sets
• Interchangeable die sets accommodate all plug sizes
Die set to modular plug cross-reference shown
ORDERING INFORMATION
Hand Tool Without Die: 2-231652-0
Plug Style
CAT 5E
8-Position
(MP-5E_)
Cat 5
8-Position
(MP-88_)
6-Position
Long Body
(MP-66_-L_)
6-Position
Standard Body
(MP-66_-_)
4-Position
(MP-44U)
DOTColor White Black Violet Blue Green
DieOnlyPN -- - - - -
HandToolwithDie --* --* -- -- --
See Instruction Sheet 408-9767 for more information.
PAGE 17
Modular Plugs, Accessories and Tooling
Pro-Installer's Modular Plug Hand Tool Kits and Accessories
FEATURES
• Each kit contains carrying case, blade replacement kit, screw driver, and items as listed
• Modular plug to die set cross reference listed as shown
ORDERING INFORMATION
Included Components
JacKnack Tool Hand Tool
CAT 5E
8-Position
Die Set
8-Position
Die Set
6-Position
Standard
4-Position
Die Set
PlugCatalog MP-E MP- MP-- MP-U
DotColor White Black Blue Green
Description - -- -- - - - Part Number
Pro-Installers
ModPlug
HandToolKits
X X X X X X --
X X - X X X --
X X - X X - --
CarryingCaseBladeReplacementKitJacKnackandScrewDriverONLY -
ReplacementBladeKit(CuttersandsetsofStripBlades) -
CutterBlade -
See Instruction Sheet 408-9767 for more information.
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
Modular Plugs, Accessories and Tooling
PAGE 19
Modular Plugs, Accessories and Tooling
Contact us
P.O. Box 1101
Minneapolis, Minnesota
USA 55440-1101
Tel: 1-800-366-3891 x73000
1-952-917-3000
Fax: 1-952-917-3237
www.te.com/bns
CATALOG
BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING
te.com
TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products
and/or company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration
purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or
completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be
as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE
Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use
or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the
suitability of each such product for the specific application.
© 2015TE Connectivity Ltd. family of companies. All Rights Reserved.
318178.6AE 07/15 Revision 2015
