SOT-23 SURFACE MOUNT LED LAMP Part Number: AM23SRD-F Super Bright Red Features Description z SOT-23 package surface mount LED lamp. The Super Bright Red source color devices are made with z Low power consumption. Gallium Aluminum Arsenide Red Light Emitting Diode. z Long life - solid state reliability. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080 Selection Guide Part No. Dice AM23SRD-F Lens Type Super Bright Red (GaAlAs) Red Diffused Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 55 90 *12 *30 21/2 140 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red 660 D [1] Dominant Wavelength Super Bright Red 640 1/2 Spectral Line Half-width Super Bright Red C Capacitance VF [2] IR Max. Units Test Conditions *655 nm IF=20mA *640 nm IF=20mA 20 nm IF=20mA Super Bright Red 45 pF VF=0V;f=1MHz Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080 Super Bright Red AM23SRD-F SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080 AM23SRD-F Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080 PACKING & LABEL SPECIFICATIONS AM23SRD-F All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080