SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080
SOT-23 SURFACE MOUNT LED LAMP
Part Number: AM23SRD-F Super Bright Red
Features
zSOT-23 package surface mount LED lamp.
zLow power consumption.
zLong life - solid state reliability.
zPackage: 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter Super Bright Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Selection Guide
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
Super Bright Red (GaAlAs) Red Diffused
55 90
140°
*12 *30
AM23SRD-F
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
* Wavelength value is traceable to the CIE127-2007 compliant national standards.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 660 *655 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Red 640 *640 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA
C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA
IR Reverse Current Super Bright Red 10 uA VR = 5V
SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080
Super Bright Red AM23SRD-F
SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080
AM23SRD-F
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAB4313 REV NO: V.7A DATE: JAN/06/2013 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000080
PACKING & LABEL SPECIFICATIONS AM23SRD-F
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes