STX13003 High voltage fast-switching NPN power transistor Features High voltage capability Very high switching speed Applications Compact fluorescent lamps (CFLs) SMPS for battery charger Description TO-92 The device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Table 1. Figure 1. TO-92AP Internal schematic diagram Device summary (1) Order codes Marking Package Packaging STX13003 X13003 TO-92 Bag STX13003G X13003G TO-92 Bag STX13003-AP X13003 TO-92AP Ammopack STX13003G-AP X13003G TO-92AP Ammopack 1. The letter "G" in the order code suffix identifies the product as ECOPACK(R)2 grade. Please see Section 3 for details. December 2010 Doc ID 7928 Rev 6 1/11 www.st.com 11 Electrical ratings 1 STX13003 Electrical ratings Table 2. Absolute maximum ratings Symbol Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0, IB = 0.5 A, tP < 10 ms) V(BR)EBO V Collector current 1 A Collector peak current (tP < 5 ms) 3 A Base current 0.5 A IBM Base peak current (tP < 5 ms) 1.5 A PTOT Total dissipation at Tc = 25 C 1.5 W Tstg Storage temperature IC ICM IB TJ Table 3. Symbol RthJC 2/11 Parameter -65 to 150 C Max. operating junction temperature 150 Thermal data Parameter Thermal resistance junction-case__________max Doc ID 7928 Rev 6 Value Unit 83 C/W STX13003 2 Electrical characteristics Electrical characteristics Tcase = 25 C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions ICES Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = 10 mA Min. Typ. TC = 125 C 9 Max. Unit 1 5 mA mA 18 V VCEO(sus)(1) Collector-emitter I = 10 mA sustaining voltage (IB = 0) C VCE(sat) (1) Collector-emitter saturation voltage IC = 0.5 A IC = 1 A IC = 1.5 A IB = 100 mA IB = 250 mA IB = 500 mA 0.5 1 1.5 V V V VBE(sat) (1) Base-emitter saturation voltage IC = 0.5 A IC = 1 A IB = 100 mA IB = 250 mA 1 1.2 V V DC current gain IC = 0.5 A IC = 1 A VCE = 2 V VCE = 2 V tr ts tf Resistive load Rise time Storage time Fall time tp = 25 s IC = 1 A ___ _ IB1 = -IB2 = 200 mA Figure 12 VCC = 125 V ts Inductive Load Storage time IC = 1 A IB1 = 200 mA L = 50 mH Figure 13 hFE 400 Vclamp = 300 V VBE(off) = -5 V RBB = 0 V 8 5 25 25 1 4 0.7 0.8 s s s s 1. Pulse test: pulse duration 300 s, duty cycle 2 %. Doc ID 7928 Rev 6 3/11 Electrical characteristics 2.1 4/11 STX13003 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. Output characteristics Figure 5. Reverse biased safe operating area Figure 6. DC current gain (VCE = 1 V) Figure 7. DC current gain (VCE = 5 V) Doc ID 7928 Rev 6 STX13003 Electrical characteristics Figure 8. Collector-emitter saturation voltage Figure 9. Base-emitter saturation voltage Figure 10. Inductive load switching time Figure 11. Resistive load switching time 2.2 Test circuits Figure 12. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Doc ID 7928 Rev 6 5/11 Electrical characteristics STX13003 Figure 13. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier 6/11 Doc ID 7928 Rev 6 STX13003 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Doc ID 7928 Rev 6 7/11 Package mechanical data Table 5. STX13003 TO-92 mechanical data mm. Dim. Min. Typ. Max. A 4.32 4.95 b 0.36 0.51 D 4.45 4.95 E 3.30 3.94 e 2.41 2.67 e1 1.14 1.40 L 12.70 15.49 R 2.16 2.41 S1 0.92 1.52 W 0.41 0.56 V 5 Figure 14. TO-92 drawing 0102782 D 8/11 Doc ID 7928 Rev 6 STX13003 Package mechanical data TO-92 ammopack shipment (suffix"-AP") mechanical data Dim. A1 T T1 T2 d P0 P2 F1,F2 F3 delta H W W0 W1 W2 H H3 H0 H1 D0 t L I1 delta P mm Typ Min 12.50 5.65 2.44 4.98 -2.00 17.50 5.70 8.50 18.00 6.00 9.00 18.50 0.5 15.50 1 16.00 3.80 4.00 Max 4.80 3.80 1.60 2.30 0.48 12.90 7.05 2.94 5.48 2.00 19.00 6.30 9.25 0.50 20.50 1.5 16.50 25.00 4.20 0.90 11.00 12.70 6.35 2.54 5.08 3.00 -1.00 1.00 0050910S Doc ID 7928 Rev 6 9/11 Revision history 4 STX13003 Revision history Table 6. 10/11 Document revision history Date Revision Changes 02-Jul-2008 5 Added halogen-free molding compound package. 06-Dec-2010 6 Added note Table 1 on page 1. Doc ID 7928 Rev 6 STX13003 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 7928 Rev 6 11/11